Used Emcomat for sale (29)

Condition: excellent (used), - Digital 3-axis position display. - Accessories included. Working Range Centre distance: 1000 mm Centre height: 200 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 250 mm Distance from top slide to turning centre: 40 mm Bed width: 260 mm Longitudinal slide travel: 900 mm Cross slide travel: 220 mm Top slide travel: 110 mm Bed carriage guide length: 380 mm Turning tool cross-section: 20 x 20 mm Spindle Spindle nose according to DIN 55 029 (Camlock): 5" Spindle bore: Ø 50 mm Internal taper according to 7178: 1:22 Max. faceplate diameter: Ø 260 mm Max. chuck diameter: Ø 200 mm Spindle speeds: 40 – 3000 rpm Speed control: stepless Mechanical speed ranges: 4 Drive Motor Three-phase AC motor with integrated brake Infinitely variable speed (frequency inverter) Power at 40% duty cycle: 5.3 kW Max. nominal torque at main spindle: 640 Nm Tailstock Hedpew U Ac Nsfx Afisnu Quill diameter: Ø 50 mm Quill stroke: 120 mm Quill internal taper: MT 3 Machine Dimensions Overall length: 1950 mm Overall height: 1635 mm Overall width: 1060 mm Spindle height above floor: 1133 mm Total machine weight: 865 kg

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system >> Bed stop Hjdpfjwag Stox Afionu About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.

Condition: like new (used), Year of construction: 2006, Year 2006 Excellent condition Welcome to view prior to prior X-Axis- 450 mm Y-Axis - 300 mm Z-Axis - 350 mm Table Length - 800 mm Table Width - 400 mm Table load - 400 Spindle speeds - 2500 Rpm Feed rate X-Axis - 0-4000 mm/min. Hedswwk Tvepfx Afienu Feed rate Y-Axis - 0-4000 mm/min. Feed rate Z-Axis - 0-4000 mm/min. Feeds all 3 directions Heidenhain digital read out Motorised ram adjustment Milling and drilling pinole Removable housing

Condition: like new (used), Year of construction: 2013, Emcomat FB600L Milling Machine Welcome to view prior to sale Year 2013 Excellent condition X Axis - 600mm Y Axis - 400mm Z Axis - 400mm EMCO Easy Cycle control system Hnsdpfx Afswwk Tceiju Table size: 800 x 400 mm Spindle mount: ISO40 Spindle speeds: 10 – 5,000 rpm Stroke of the pinole: 80 mm Feed on all axes: 10 – 2000 mm/min. Rapid traverse: 5000 mm/min Weight approx. 2100kg

Condition: ready for operation (used), Year of construction: 2019, Control Unit Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 10–5000 Number of axis 3 Movement X-Axis Movement 450 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Tools Type of tool holder SK40 This 3-axis EMCO Emcomat FB-450 MC was manufactured in 2019. It features a travel range of X450/Y350/Z400 mm, a fixed angle table of 800x400 mm, and a table load capacity of 450 kg. The spindle speed reaches up to 5000 rpm, complemented by a rapid traverse of 5000 mm/min. Includes a Sinumerik 828D interface with multi-touch display and a comprehensive 3-axis control package. If you are looking to get high-quality milling capabilities consider the EMCO Emcomat FB-450 MC machine we have for sale. Contact us for more information. Application Types Milling Hsdpjxnr Hvofx Afionu

Condition: like new (used), Year of construction: 2019, operating hours: 40 h, functionality: fully functional, turning diameter over cross slide: 220 mm, turning length: 900 mm, turning diameter: 400 mm, spindle speed (max.): 4,000 rpm, spindle motor power: 7,500 W, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, rotational speed (min.): 50 rpm, rotational speed (max.): 4,000 rpm, total height: 1,700 mm, total length: 2,495 mm, total width: 1,730 mm, feed length X-axis: 220 mm, feed length Z-axis: 900 mm, workpiece weight (max.): 80 kg, turning diameter over top slide: 220 mm, type of input current: three-phase, overall weight: 1,500 kg, chuck outer diameter: 200 mm, center height: 1,100 mm, mount diameter: 20 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 25 A, warranty duration: 24 months, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, EMCOMAT E-200 MC for the manual or cycle-controlled machining of large workpieces The machine is intended for production-oriented users. High chip-cutting power, precision and universality are its characteristic features. The generous workspace allows large workpieces to be machined. The EMCOMAT E-200 MC´s circulating ball screws free of play allow precise axes positioning. The machine can be operated manually with hand wheels or feed keys or, with Sinumerik 828D as cycle-controlled lathe. Therefore, it‘s applicable for the production of single parts or small series. The ‘manual machine’ function on the user interface of the SINUMERIK 828D optimally implements the concept of a controlled conventional lathe. Whether during set-up, programming or machining – the skilled workers’ normal view of the work process is improved. EMCO‘s wide range of options covers everything you need to handle even the most complicated machining projects. - High cutting power - High quality casting with strong ribs for low-vibration machining operations - Fully automatic central lubrication of the X and Z slides and the recirculation ball spindles - Electronic handwheels are available for manual operation of X and Z axis - Made in the Heart of Europe Standard machine equipment:  Hardened linear guides in X and Z axis  Recirculating ball spindles for X and Z axis  Sinumerik 828D with „manual machine“ and and 10,4" LCD monitor Hsdpexgi R Nsfx Afienu  Coolant system  Central lubrication of guides and recirculating ball spindles  Electronic handwheels for X and Z control  Machine lighting  Partly covered workspace with sliding chip-stop doors  Loading drawers  Operator tools  User guide and spare parts list  Documentation of the electrical systems  M easure tool  Traverse axes  Set zero offset (ZO)  Turn straight line / circle  D rill, such as centered drilling, centering, deep-hole drilling  Turn, such as stock removal, grooving, thread cutting  Turn contour

Condition: new, Machine according to DIN 8605: lathe with increased accuracy. Tip width: 700 mm Peak height: 170 mm Circulating diameter over bed: 340 mm Circulating diameter over flat slide: 190 mm Bed width: 260 mm Laengs schlitten: 600 mm Shifting path cross slide: 220 mm Shifting path upper slide: 110 mm Flat slide: 410 mm Flat slide width: 150 mm Guide load-length bed slide: 380 mm Rotary chisel cross-section: 20x20 mm Center of rotation distance - Upper slide: 34 mm Swing range upper slide (Support): 60/120° Main spindle: Spindle connection DIN 55029 (Camlock): S 5 Spindle bore: 50 mm Inner cone according to DIN 7178: 1:22 Spindle diameter in the front bearing: dia. 70 mm Max chuck diameter: 200 mm Max. washer diameter: 200 mm Spindle speeds: 40-3000 rpm Speed control: Stepless mechanical speed levels: 4 Main drive: Power at 40% ED: 5.3 kW Max rated torque a. d.Main spindle: 640 Nm Feed: 20 (28) Laengsvorschuebe Z: 0.045-0.787 mm/U 20 (28) Plan vorschuebe X: 0.023-0.406 mm/U Thread: 20 (28) metric thread (basic): 0.4 - 7.0 mm 32 inch thread (with option Raed replacement D3Z200): 56 - 4 Gg/inch 28 Module thread (with option Raed replacement D3Z200): 0.2 - 3.5 32 diam. Pitch thread (with option Raed replacement D3Z200): 112 - 8 Tailstock: Pinole diameter: 50 mm Hodpfx Afedctnbeisnu Indoor cone of the pinole: MK 3 Pinole stroke: 120 mm Side adjustment: x 13 mm Zulessige Werkstueckweights

Condition: ready for operation (used), Year of construction: 2013, Emco emcomat FB-600 CNC milling machine in Nieuwstraat! Hedpfx Ajxc H H Hjfionu

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, spindle bore: 50 mm, EMCO lathe EMCOMAT 17D ex education in very clean condition. Hjdpfx Afju N Dpmeienu Specifications: - year of construction 2006 - turning diameter over the bed 340mm - turning diameter over the cross slide 190mm - distance between centers 700mm - speed 40-3000rpm variable in 4 steps - diameter of main spindle 50mm Accessories: - 3-jaw chuck with inner and outer jaws - 3-axis digital readout - electric diagram - multifix chisel holder with 3 holders - cooling system - machine illumination - rotating center - bedstop - machine feet

Condition: used, Year of construction: 2017, Emcomat E300 for sale. The machine was manufactured in 2017. Machine type: EM300x1500 SIEM Some repairs have been carried out and the following defects are known to us: Geometry checked. Hnsdpfxjw I S Uuo Afiou Z-guides in the area of the main spindle (chuck) are slightly worn. Z-slide tilts in X and Y under load up to 0.1mm; in this range, precise work is no longer possible at higher clamping pressure. Tool changer checked and adjusted. X-axis belt replaced and machine zero point set. Automatic band lubrication oil loss – troubleshooting performed, problem resolved, lubrication oil line renewed. Machine is operational – with reservation regarding Z-axis guidance.

Year of construction: 2003, condition: ready for operation (used), General Data Machine weight 2100 kg Control Unit Brand FAGOR Model 8055 Main Drive Spindle speed range 3000 rpm Hnsdpjxirfbofx Afieu Spindle motor power 11-15 kW Spindle bore 52 mm Movement X-Axis Movement 220 mm X-Axis Rapid Traverse 5 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 5 m/min Tail Stock Pinol diameter 52 mm Pinol tool taper 4 N Additional Equipment Total Installed Power: 13 kW This EMCO EMCOMAT-E 200X1000 was manufactured in 2003. A robust horizontal turning machine featuring a FAGOR 8055 CNC, it offers a spindle speed of up to 3000 rpm and a spindle power of 11-15 kW. The machine handles a maximum diameter of 400 mm above the bed and 220 mm over the slide, with a center height of 200 mm. Contact us for more information about this machine. Application Types Turning

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 40 h, functionality: fully functional, feed length X-axis: 450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, quill travel distance: 80 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, total height: 1,990 mm, total width: 2,030 mm, total length: 1,980 mm, table width: 270 mm, table length: 400 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, table load: 450 kg, overall weight: 2,270 kg, input voltage: 400 V, workpiece weight (max.): 450 kg, warranty duration: 24 months, input current: 16 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, Immediately available stock machine from our Trencin (SK) showroom. (Sale reserved.) EMCOMAT FB 450 with Siemens Sinumerik 828D control system. DEMO machine in “AS NEW” condition, available for immediate delivery. (Sale reserved.) We are happy to provide you with an individual offer. Visit us and inspect the machine under power. Travel range: X450/Y350/Z400 mm Table size: 800 x 400 mm Drive power: 7/10 kW Infinitely variable spindle speed: 10–5000 rpm SIEMENS Sinumerik 828D Universal toolroom milling and drilling machine equipped with the modern Sinumerik 828D control system and hydraulic tool clamping. Travel range: X450/Y350/Z400 mm Drive power: 7/10 kW Spindle speed: 10–5000 rpm Feed rate: 10–2000 mm/min Rapid traverse up to 5000 mm/min Toolroom machine precision according to DIN 8615 Tool holder: DIN 69871 SK40 Includes: - Linear guides - Ball screws - Vertical milling head swivel ±90° with quill stroke 80 mm Hnjdpfx Afsxapdceisu - Swivelling unit for vertical head - Hydraulic tool clamping - Coolant system - LED machine lighting - Fixed angle table 800x400 mm - Chip tray - Automatic central lubrication - Service tools - Documentation in Czech and English - Sinumerik 828D interface in Czech, German, English - 15" multi-touch display - Includes 3-axis control package with ball screws and servomotors - Machining cycles with graphic support: - Drilling, deep drilling, reaming - Tapping (with length compensation), on pitch circle and in a line of holes - Rectangular and circular pockets - Slot milling cycle - Measurement cycle - etc. - USB interface

Condition: excellent (used), functionality: fully functional, Emcomat 17D Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C New from Training Workshop Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 >> Machine no.: D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm Hodpfxjwvuf Ts Afionu >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35 to 3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required floor space approx. (L x D x H): 1.600 x 0.9 x 1.3 meters >> Weight: approx. 730 kg Equipment and Accessories: >> 3-axis digital readout from K&C, new, with 12 months manufacturer’s warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece three-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B toolholder with 2 tool pockets >> Chip guard >> Coolant system About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is of course fully functional. The bedways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new three-jaw chuck. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Condition: ready for operation (used), Year of construction: 2007, turning diameter over cross slide: 190 mm, turning length: 700 mm, turning diameter: 340 mm, spindle bore: 50 mm, Emco EMCOMAT-17D Hjdpsxc H Dfsfx Afionu Distance between centers: 700 mm Swing diameter over bed: 340 mm Swing diameter over carriage: 190 mm Spindle bore/pass-through: 50 mm Spindle speeds: 35–3000 rpm Infinitely variable speed adjustment between gear ranges. Equipped with longitudinal and cross feed. 2-axis digital readout on X and Z axes. Multifix quick-change tool post.

Condition: new, Year of construction: 2025, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 400 mm, center height: 200 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, total length: 2,495 mm, total width: 1,730 mm, total height: 1,700 mm, type of input current: three-phase, overall weight: 1,500 kg, rotational speed (min.): 50 rpm, rotational speed (max.): 4,000 rpm, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Cycle controlled lathe center width 1000 mm centre height 200 mm spindle bore 53/50 mm max. Speed 4000 rpm Spindle connection size 5, DIN55029 Hedpfx Afsdtmwteienu Max. drive power Drive power 7,5 / 10 kW Manual machine (operation via electronic handwheels) Siemens 828D full CNC control dimensions (LxWxH) 2320 x 1730 x 1700 mm Machine weight 1500 kg As a regional partner of EMCO we offer maintenance, service and training in the field of conventional machines. Visit our showroom in Stuttgart for machine inspections.

Condition: used, Year of construction: 1999, Technical details: Hnsdpeu Ixw Aefx Afiou turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm centre distance: 700 mm revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs *

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand SIEMENS Model 828D Main Drive Spindle speed range 53 / 50 mm Spindle motor power 7.5 / 10 kW Spindle bore 53 / 50 mm Number of axis 2 Movement X-Axis Rapid Traverse 10 m/min Z-Axis Rapid Traverse 10 m/min Hnjdpfswwm Rdox Afiju Workpiece Workpiece drm over bed 400 mm This EMCO Emcomat E-200 was manufactured in 2016. A robust horizontal turning machine featuring a swing over bed of Ø 400 mm and a distance between centers of 1000 mm. It offers a spindle speed range of 50–4000 rpm with stepless speed control and a spindle bore diameter of Ø 80 mm. If you are looking to get high-quality turning capabilities, consider the EMCO Emcomat E-200 machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2013, operating hours: 42,989 h, functionality: fully functional, Emco Emcomat 7 lathe and milling machine combination. Good technical condition. Single phase power supply, multi speed selection for lathe and milling machine. Hedpfx Ajwm Eg Njfijnu Forward and reverse lead screw. Comes with several spare parts / tools / stands. Interested in buying? In the message, include your email address and phone number and I will contact you shortly.

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 10 rpm, rapid traverse X-axis: 5,000 m/min, rapid traverse Y-axis: 5,000 m/min, rapid traverse Z-axis: 5,000 m/min, table length: 800 mm, table width: 400 mm, total height: 1,990 mm, total length: 2,100 mm, total width: 2,190 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, overall weight: 2,370 kg, table load: 300 kg, workpiece weight (max.): 300 kg, Equipment: documentation/manual, rotational speed infinitely variable, When space is at a premium and maximum accuracy is required, conventional milling machines are in demand. The cycle-controlled milling machines offer an economical alternative for the production of small batches or larger workpieces.Machine highlights:- Pivoting control panel- Right/left rotation of the main spindle- All pinching points eliminated by covers- Hardened and ground shafts and gearwheels- Linear guides- Main motor with spindle brake- Quadruple-bearing radial/axial milling spindle- Sinumerik 828D or Heidenhain TNC 620working area:- Traverse path in X/Y/Z: 600 / 400 / 400 mm Distance spindle nose table: 230 - 630 mm (horizontal milling spindle) - Rapid traverse speed X/Y/Z: 5000 mm/min- Working feed X/Y/Z: 10 - 2000 mm/min- Max. travel distance in X/Y/Z: 600 / 400 / 400 mm- Max. travel distance spindle nose table: 230 - 630 mm (horizontal milling spindle) - Max. travel distance X/Y/Z: 5000 mm/min- Max. travel distance X/Y/Z: 10 - 2000 mm/min- Max. travel distance X/Y/Z: 630 mm Feed force in X/Y/Z: 10 / 10 / 15 kN- Clamping surface: 800 x 400 (rigid angular table)- Max. feed force in X/Y/Z: 10 / 10 / 15 kN- Max. feed force in X/Y/Z: 10 / 15 kN- Max. feed force in X/Y/Z: 800 x 400 (rigid angular table) Table load: 300 kg (rigid angular table)Vertical milling head:- Speed range: 10-5000 rpm- Power: 13 kW Hnedpfx Afed D I Tmoiou

Condition: new, Year of construction: 2025, Immediately available stock machines subject to prior sale. Please contact us for an offer. Emcomat 14 D conventional lathe center width 650 mm Center height 140 mm Max. Speed 4000 rpm Spindle connection size 4 (DIN 55029) Max. Drive power 7,5 kW Dimensions (LxWxH) 1280 x 1480 x 730 mm Machine is equipped with digital display. Hodpfx Asdtmy Tjfienu (Constant cutting speed within gear stage) As a regional factory representative of EMCO we offer maintenance, service and spare parts for conventional machines from EMCO. Visit our showroom in Stuttgart and contact us for a qualified consultation.

Condition: as good as new (ex-display), Year of construction: 2024, Immediately available stock machine from our showroom Stuttgart. ( subject to prior sale) Contact us for an offer. EMCOMAT FB 450 with Siemens control. New machine immediately available. ( subject to prior sale) Contact us for an offer. We will be happy to make you an offer. Hnsdpfx Afjibd Alsiou Visit our demonstration center Arbeitsbereich X450/Y350/Z400mm Table size 800x400mm 7/10kW drive power speed range stepless 10-5000 rpm Siemens 828D Universal tool milling and drilling machine with Sinumerkik 828D contouring control and hydraulic tool clamping. Arbeitsbereich X450/Y350/Z400mm 7/10kW drive power Speed from 10-5000 rpm feed rate from 10-2000 mm/min rapid traverse up to 5000 mm/min Toolmaker accuracy DIN8615 tool holder DIN 69871 SK40 Includes:Linear guides Ball screws Vertical milling head +/-90° swiveling with 80mm quill stroke Swing out device for vertical head Hydraulic tool clamping Coolant device LED machine lamp Rigid angular table 800x400mm Chip tray Automatic central lubrication Operating tool Documentation Sinumerik 828D contouring control with 15" multi-touch screen incl. control package in 3 axes with ball screws and servo motors, machining cycles with graphic support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on hole circle and hole lines, rectangular and circular pocket, slot milling cycle, cycles for line-off, etc., USB interface

Condition: new, Year of construction: 2025, functionality: fully functional, spindle bore: 50 mm, center height: 170 mm, total length: 1,650 mm, total width: 1,060 mm, total height: 1,635 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 40 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, overall weight: 755 kg, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, New machine immediately available from our warehouse in Stuttgart. ( subject to prior sale) Hsdpfx Aedq Rb Aefionu Whether prototype construction, maintenance or very important the training - the conventional and cycle-controlled machines of EMCO create here the balancing act and offer highest accuracy on smallest space and flexibility up to the detail. From possible accessories to the organization of the insertion, we are at your side with advice. Highlights of the EMCOMAT 17D - Main spindle DIN55029 - Tailstock (off-center adjustable) - Single steel holder (clamping claw) - Belt drive for feed gear - Chuck protection with electric limit switch - Optional equipment such as coolant device, sliding chip guard doors, etc. Working range: - Travel in X/Y/Z: 220 / - / 710 mm - center distance: 700 mm - Center height: 170 mm Main spindle: - Max. Speed: 3000 rpm - Spindle connection: Size 5 (DIN 55029) - Max. Drive power: 5.3 kW Tailstock: - Internal cone: MK3 - quill stroke: 120 mm - inner taper of the quill: 50 mm The machine can be inspected in Stuttgart.

Condition: new, Year of construction: 2025, functionality: fully functional, center height: 200 mm, quill stroke: 120 mm, quill diameter: 50 mm, total length: 1,950 mm, total width: 1,060 mm, total height: 1,635 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 40 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Whether prototype construction, maintenance or, most importantly, training - EMCO's conventional and cycle-controlled machines manage the balancing act and offer maximum accuracy in the smallest possible space and flexibility down to the last detail. Highlights of the EMCOMAT 20D- Main spindle DIN55029- Tailstock (eccentrically adjustable)- Simple steel holder (clamping claw)- Belt drive for feed gear- Chuck protection with electric limit switch- Optional equipment such as coolant device, sliding chip guard doors etc.Working range:- Travel in X/Y/Z: 220 / - / 1010 mm- Center distance: 1000 mm- Center height: 200 mmMain spindle:- Max. travel distance in X/Y/Z: 220 / - / 1010 mm- Max. travel distance in X/Y/Z: 220 / - / 1010 mm- Max. travel distance in X/Y/Z: 1000 mm Speed: 3000 rpm - Spindle connection: Size 5 (DIN 55029)- Max. speed: 3000 rpm - Spindle connection: Size 5 (DIN 55029)- Max. speed: 3000 rpm - Max. speed: 3000 rpm - Spindle connection: Size 5 (DIN 55029)- Max. speed: 3000 rpm Drive power: 5.3 kW Tailstock:- Inner cone: MK3- quill stroke: 120 mmm- inner cone of the quill: 50 mm Hedped D I Thjfx Afionu

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 350 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 80 rpm, total height: 1,550 mm, total width: 1,410 mm, total length: 11,150 mm, overall weight: 500 kg, The EMCOMAT FB-3 L is ideal for use in tool and mould making, in apparatus and prototype construction and in small series production. It has also proven itself many times in schools and training workshops. As the smallest machine in the EMCO milling machine range, the FB-3 L already meets the highest demands for accuracy and flexibility - and that at an unbeatable price-performance ratio. Travel in X/Y/Z 300 / 200 / 350 mm Distance spindle nose table 80 - 430 mm Clamping surface 600 x 200 mm (rigid angle table) Max. table load table load 50 kg (rigid angle table) Speed range 80 - 2200 rpm Hnodpsdtm Ahefx Afiou Power 1,4 kW Tool holder SK30 DIN2080

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 10 rpm, total height: 1,990 mm, total length: 2,100 mm, table width: 2,190 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, overall weight: 2,370 kg, workpiece weight (max.): 300 kg, Equipment: rotational speed infinitely variable, Universal milling and drilling machine with Heidenhain TNC 620 contouring control as manual machine operable via handwheels. Control can be locked via key switch and hydraulic tool clamping. Arbeitsbereich X600/Y400/Z400mm 7/10kW drive power speed from 10-5000 rpm feed rate from 10-2000 mm/min rapid traverse up to 5000 mm/min Toolmaker accuracy DIN8615 tool holder DIN 69871 SK40 Includes:Linear guides Ball screws Vertical milling head +/-90° swiveling with 80mm quill stroke Swing out device for vertical head Hydraulic tool clamping Coolant device LED machine lamp Rigid angular table 800x400mm Chip tray Automatic central lubrication Operating tool Documentation Heidenhain TNC 620 contouring control with 19" multi-touch screen Hjdpjibarqefx Afionu incl. drive package in 3 axes with ball screws and servo motors, Fixed cycles with graphic support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on hole circle and hole lines, rectangular and circular pocket, slot milling cycle, cycles for line-off, etc., USB interface, PC keyboard