Used Emulsion for sale (300)

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2014 Control : Siemens 840 Dsl - Operate Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2014 Control system:Siemens 840 Dsl - Operate Swivel diameter:540 mm Turning length:1,185 mm Bar capacity:67 mm Ijdszig Tmepfx Ah Estl Main spindle: Technology:Direct drive spindle Speed:5,000 rpm Power:32 kW Torque:360 Nm Bar capacity:67 mm C-axis:0.001° Chuck:Hainbuch Spanntop Axfix 65 Hydraulic clamping:Differential pressure clamping Clamping cylinder:Hollow clamping cylinder Coolant supply:External (chuck flushing) Sub spindde: Technology:Direct drive spindle Speed:5,000 rpm Power:32 kW Torque:360 Nm C-axis:0.001° Chuck:Hainbuch Spanntop Axfix Hydraulic clamping:Differential pressure clamping Coolant supply:External and internal Tailstock function:Mechatronic control of the sub spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on a travelling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:HSK 63 X-axis:450 mm Y-axis:200 mm (+/- 100) Z-axis:1,200 mm B-axis:+/- 110° Position measurement systems:Direct (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm (+/- 40) Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Steady rest:SLU2X turret steady rest, 8–101 mm Tool magazin: Technology:Chain magazine Number of stations:80 Tool changer:Double gripper Equipment: Position sensors:Direct in X1/Y1/Z1/X2/Z2/Z3 Chip removal:Chip conveyor Coolant supply:CTS system, 20 bar Tool monitoring:Easy Tool Monitor Tool measurement:Tool setter, Renishaw Part removal:Part gripper, conveyor belt Bar feeder:Interface Emulsion mist separator:Mechanical Software option I:5-axis simultaneous milling Software option II:Off-centre turning and milling Software option III:Alternating spindle speed Chucks:2x Hainbuch Spanntop

Condition: used, Year of construction: 2007, machine/vehicle number: 511966, Turning length: approx. 400 mm, bar passage: 60 mm, counter spindle, 2 x 14-position tool turret, cross slide X/Y/Z, B-axis slide control INDEX C 200-4 D, workpiece removal, conveyor belt, chip conveyor, manufacturer: KNOLL, bar feeder MBL 65/3700, the machine requires repair; repair costs according to the cost estimate: approx. €1,880.00 net; drilling emulsion/lubricants must be professionally extracted and disposed of by the customer. Ijdpfxezqy U Ho Ah Eotl

Condition: used, Year of construction: 2007, machine/vehicle number: 511979, Turning length: approx. 400 mm, bar passage: 60 mm, Y-axis, counter spindle, 2x 14-station tool turret, cross slide X/Y/Z, B-axis slide control INDEX C 200-4 D, workpiece removal, conveyor belt, chip conveyor, manufacturer: KNOLL, bar loader MBL 65/3700, machine requires repair, gear pump defective, repair costs according to quotation: approx. €6,000.00 net, drilling emulsion/lubricants must be professionally extracted and disposed of by the customer. Ijdezqy Uyopfx Ah Estl

Condition: ready for operation (used), Year of construction: 2020, operating hours: 19,990 h, functionality: fully functional, turning length: 2,100 mm, turning diameter: 560 mm, spindle motor power: 37,000 W, spindle speed (max.): 2,000 rpm, spindle bore: 117 mm, travel distance X-axis: 320 mm, travel distance Z-axis: 2,200 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, overall weight: 11,000 kg, Hyundai WIA L400LMC – Heavy-Duty Long-Bed Turning Center The Hyundai WIA L400LMC is a robust and powerful turning center designed for machining large and heavy workpieces with high stability and precision. With its high torque spindle, large machining capacity, and integrated automation-ready features, this machine is ideal for demanding industrial applications. With box guide design – the most rigid solution used in turning centers. Itodey T Ixbspfx Ah Eol Key technical specifications: • Main spindle power: 37 kW • Maximum torque: 3,073 Nm • Maximum spindle speed: 2,000 rpm • Maximum turning length: 2,100 mm • Chuck size: 15” • Maximum bar capacity through spindle: Ø117 mm Machine configuration: • 12-position turret with BMT75 interface • C-axis for advanced machining operations • High-pressure through-tool coolant system – 15 bar • Bar feeder interface • Automatic Q-SETTER tool measuring system • FANUC control system • Hydraulic steady rest, programmable via M-code • Large programmable tailstock, controlled via M-code • Coolant spray gun • Wide machine door opening (>2000 mm) for easy loading of large parts • Oil mist / emulsion extraction system Additional equipment included: • 4 driven tools included • SMW-Autoblok SLUB-5-ZS-050310 self-centering steady rest o Monitoring of open/closed position o Clamping range: 50–310 mm The machine was commissioned in 2020 and has been in regular industrial use. The equipment remains in good working condition and offers a powerful solution for heavy-duty turning applications requiring high torque and long part capacity.

Condition: used, Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Siemens, controller model: 840D, table width: 500 mm, table length: 500 mm, table load: 300 kg, rotary table diameter: 500 mm, rotational speed (max.): 1,200 rpm, overall weight: 14,000 kg, spindle speed (max.): 12,000 rpm, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 181, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We acquired this machine in working condition directly from production; see the videos of the machine in operation before disassembly! The Mori Seiki NMV 5000 DCG is a high-end (simultaneous) 5-axis machine designed for precision manufacturing in industries where complex shapes and tight tolerances are critical. Includes: KNOLL FKA/500 belt filter system + 3 filter rollers. Itodpfxjzlf Eae Ah Eel Filtermist FX5000 emulsion extraction system. Renishaw OMP60 3D probe. Chip conveyor. Spindle cooler. Original Mori Seiki tool storage cabinet. Original documentation + electrical diagrams.

Condition: ready for operation (used), functionality: fully functional, The Seydelmann K504 vacuum cutter cooker combines chopping, mixing, emulsifying, and cooking in a 500-liter tank. It is particularly suitable for manufacturers of processed meats, ready meals, meat products, fish, and plant-based alternatives. In this way, a single machine can perform multiple processing steps while minimizing product transfers. The K504 processes both fresh and pre-cut, frozen or cooked meat equally well. Furthermore, Seydelmann also provides for its use with fish, vegetables, plant proteins, fruits, and other food preparations. Its operating range extends from -12°C to +85°C. Vacuum chopping and emulsifying The vacuum function removes air during the chopping process. Consequently, it enables a finer and more compact emulsion to be obtained. Seydelmann indicates a volume reduction related to air of between 5 and 7%. Moreover, vacuum processing promotes protein extraction as well as the binding of water and fats. This technology particularly meets the needs of the industrial processed meat industry. It is suitable, for example, for cooked sausages, dry sausages, meat emulsions, and preparations that require a uniform texture. The K504 is also recognized on the market as an industrial vacuum cutter and 500-liter cooker. Cooking and chopping in a single machine The cooking system heats the tank with hot steam injected underneath it. As a result, the product can be chopped and heated during the same process. This combination reduces production steps and can therefore shorten the processing time. The Seydelmann K504 is therefore suitable for recipes that require fine grinding, thorough mixing, and controlled temperature increase. Furthermore, the large tank capacity meets the needs of industrial batch production. Isdpozzzyrefx Ah Estl Control and integration into production The Auto-Command 1000 system features a 21.5-inch color screen. It allows you to monitor technical parameters and store 30 programs, each including up to 10 steps. In this way, the operator can more easily reproduce the settings for different recipes. Finally, the cutter can be equipped with loading and unloading equipment to facilitate product handling. Its construction, which is almost entirely made of stainless steel, also simplifies cleaning. The Seydelmann K504 is therefore a complete solution for industrial companies looking for a large-capacity vacuum cutter cooker. Technical specifications Manufacturer: Seydelmann Model: K504 Tank capacity: 500 L Operating range: -12°C to +85°C Motor power: 140 to 200 kW depending on the version The advantages 500-liter industrial tank Chopping, mixing, and emulsifying Vacuum processing Integrated cooking Processing of fresh, frozen, or cooked products Adaptation to meat and plant-based recipes Up to 30 production programs Reduced transfers between multiple machines Stainless steel construction

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller model: HEIDENHAIN TNC 640 CELOS, rotational speed (min.): 20 rpm, rotational speed (max.): 10,000 rpm, DMG MORI DMF 360|11 linear – Traveling Column Milling Machine For sale is a DMG MORI DMF 360|11 linear with extensive equipment and a HEIDENHAIN TNC 640 / CELOS control system. Technical data Travel ranges X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Rapid traverse rate X/Y/Z: 80 / 60 / 60 m/min Linear drive in the X-axis Milling head / Spindle NC swivel milling head, B-axis Spindle speed: 20 – 10,000 rpm Spindle power: 44 / 32 kW Torque: 288 / 187 Nm Tool holder: SK50 / DIN ISO 7388-1-A50 Tool magazine 120 tool positions Chain magazine with dual gripper Mechanical setup aid for tool loading Work table Fixed table with integrated rotary table Rotary table: Ø 1,050 mm Rotary table arranged on the left side Max. load capacity of rotary table: 1,200 kg Itedpfezv Eglox Ah Ejl Hydraulic clamping Control system HEIDENHAIN TNC 640 CELOS 21.5" ERGOline® Control Multi-touch screen Equipment / Options Internal coolant supply 40 bar / 980 l Paper band filter Chip conveyor HEIDENHAIN TS 460 infrared measuring probe Preparation and software option for 3D quickSET MPC – Machine Protection Control Compressed air through the spindle center Oil and emulsion mist extraction system, 2 × 1,600 m³/h 2 rotating viewing windows Purge air for linear measuring systems Direct measuring systems Active cooling for main spindle and linear motor Automatic door drive Electronic handwheel IoTconnector Machine Data Connector (OPC UA / MTConnect / MQTT) NETservice Machine can be inspected by arrangement. Further information, photos and videos available on request.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 12,055 h, functionality: fully functional, turning length: 760 mm, turning diameter: 420 mm, spindle motor power: 37,000 W, spindle speed (max.): 3,000 rpm, spindle bore: 102 mm, travel distance X-axis: 265 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 102 mm, overall weight: 6,900 kg, The Hyundai WIA L3000SY represents the flagship model in Hyundai WIA’s turning center lineup, designed for high precision machining, productivity, and long-term reliability. The machine is equipped with true direct-drive spindles (without belts), ensuring excellent torque transmission, high dynamic performance, and improved machining accuracy. Key technical features include: • Main spindle: 12” chuck with 37KW • Sub spindle: 6” chuck • True Direct Drive spindles (belt-free design for higher precision and reliability) • BMT65 turret with 24 positions and 12 driven tool stations • Driven tools: up to 5,000 rpm with 7.5 kW power • Through-tool coolant system – 15 bar • Gun coolant system • Digital scales for improved machining precision • Pneumatic part pusher through the sub-spindle, including part flushing with M code • Part catcher on both main and sub spindle • Part extraction conveyor • Bar feeder connection • Bore-Max bar capacity: Ø102 mm • Chip conveyor • Automatic Q-Setter tool measuring system • Latest generation FANUC control • Oil mist / emulsion extraction unit with the machine • Hainbuch main spindle chuck Iedpfx Ajy T Iuish Estl The machine was installed at the customer site in 2020 and has been used only lightly. The current owner is changing production profile, which is why the machine has become available. This configuration offers an excellent opportunity to acquire a high-end multi-tasking turning center with very strong specifications and low operating hours. Machine has regular Maintenance done and machine is working! With box guide design – the most rigid solution used in turning centers.

Condition: used, Year of construction: 2007, machine/vehicle number: 402235, Spindle bore: 36 mm, maximum spindle speed: 7,000 rpm. C-axis, 1 turret, X/Z-axis, 7-station + synchronized spindle, driven tools, 1 tool turret, X/Z-axis, 6-station, driven tools, control system: INDEX C 200-4 D, back-side machining, workpiece removal, conveyor belt, chip conveyor, bar loader MBL 52/3200. Drilling emulsion/lubricants must be professionally extracted and disposed of by the customer. Iedpfxszqy U Te Ah Eetl

Condition: excellent (used), functionality: fully functional, Stephan MC 15 Vertical Microcutter / Emulsifier Brand: A. Stephan u. Söhne GmbH & Co. Model: MC 15 Itsdpfxeyr S R Rs Ah Eol Power: 11 kW Voltage: 380 V 50 Hz Current: 21.5 A Rotational speed: 2,900 rpm Duty cycle: ED 100 (continuous operation) Protection class: IP 44 The compact vertical Stephan MC 15 emulsifier is a reliable unit for ultra-fine chopping and homogenization of food products. With its 11 kW motor and high rotational speed (2,900 rpm), the machine excels at producing emulsions, sauces, and fine meat fillings. Its robust construction, combined with continuous operation capability (ED 100%), makes it a highly efficient component of any production line.

Condition: used, Year of construction: 2017, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2017 Control : Siemens 840 Dsl Grinding length : 1000 mm In General: Year of manufacture:2017 Control system:Siemens 840 Dsl Centre height:180 mm Centre distance:1,000 mm Maximum workpiece weight:150 kg X-Axis: Technology:Electromechanical Transverse speed:0.001 – 8,000 mm/min Measuring system:Direct, 0.0005 mm (glass scale) Guideway:Hydrostatic Z-Axis: Technology:Electromechanical Table speed:0.01 – 12,000 mm/min Measuring system:Direct, 0.0005 mm (glass scale) B-Axis: Technology:Continuously swivelling axis Resolution:0.001° Clamping:Hydropneumatic Workpiece spindle: Power:2.0 kW Speed:0–600 rpm Chuck:MK 5 and KK 5 C-axis:0.001° Grinding spindle: Disc configuration:left/right Power:9 kW Speed:1,400 rpm Internal grinding spindle: Power:2.2 kW Speed:60,000 rpm Itedszhdybopfx Ah Eol Tail stock: Quill stroke:40 mm Mounting:MK 4 Quill retraction:Hydraulic Cylinder fine adjustment:Yes Equipment: Coolant supply:Coolant system with filter Emulsion mist separator:Mechanical Grinding wheel dresser:Diamond dressing tile Technology option I:Cone grinding Technology option II:Out-of-round grinding Balancing system:Automatic Grinding detection:Via structure-borne sound Workpiece measurement:Linear encoder Accessories:Various flanges, discs and mandrels

Condition: used, Year of construction: 2007, operating hours: 70,859 h, machine/vehicle number: 15145361464, Travel ranges (X/Y/Z): 3,600/920/820 mm, with B-axis and integrated NC table, maximum spindle speed: 18,000 rpm, tool interface HSK-A63, 30-position tool changer, pendulum machining, control system SIEMENS Sinumerik 840 D Powerline, chip conveyor, emulsion separator, infrared measuring probe. The customer must ensure that drilling emulsion/lubricants are professionally extracted and disposed of. Isdpjzqy Umjfx Ah Ejtl

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Machining diameter: 4,200 mm Machining height: 550 mm Diameter of magnetic chuck: 4,000 mm Max. speed of rotary table: 13 min-1 Control system: SIEMENS SINUMERIK 840D PL RIGHT GRINDING HEAD Swiveling range, external: 50° Swiveling range, internal: 47° Max. grinding wheel diameter: 610 mm Max. grinding wheel height: 255 mm Max. workpiece height: 550 mm Travel – X: 2,820 mm Travel – Z: 820 mm Rapid traverse X + Z axes: 10,000 mm/min LEFT GRINDING HEAD Max. grinding wheel diameter: 610 mm Max. grinding wheel height: 255 mm Itjdez Difrspfx Ah Eol Max. workpiece height: 540 mm Travel – U: 2,870 mm Travel – W: 790 mm Rapid traverse U + W axes: 10,000 mm/min GRINDING WHEEL MAGAZINE Right magazine: Number: 5 Left magazine, number: 4 DIMENSIONS AND WEIGHTS Machine weight: approx. 143,000 kg Machine dimensions (L x W x H): approx. 13,400 x 8,945 x 4,250 mm ACCESSORIES - Automatic grinding wheel changer, left (4) & right (5) - Automatic dressing unit for both grinding heads, MARPOSS P7 - Various grinding wheels and arbors - Oil mist emulsion extraction system - Automatic balancing device - Hydrostatic guidance in all machining axes DESCRIPTION The machine is in exceptionally good condition and has only been used for the highly precise finishing of large bearings for offshore wind turbines. The machining process included grinding the inner and outer diameters, as well as the highly precise raceways of the rolling bearings. The machining results achieved demonstrate the machine's outstanding performance. Inner and outer diameters with a workpiece diameter of up to 4,000 mm were ground within a tolerance of ±20 µm. A profile accuracy of 2–3 µm was achieved for the raceways.

Condition: good (used), Year of construction: 2003, Filter rinsing tank Filtering takes place through an internal filter unit - Manufacturer: Atlantik GmbH - Model: 30.701.31.15100 Itsdpfsiw Eafox Ah Eel - operating pressure: 10 bar - filtered grain size: 6.0 µmm (micron mm) - Overall dimensions: 1050 x 1150 x 1620 mm - Capacity: 425 L - Electrical data: 250V, 5A, 50/60Hz - Year of manufacture: 2003

Condition: used, Year of construction: 2010, Losma Darwin 2000 D Dust Extraction Systems 5 units with pre-filter, 2 units with turbine only The systems are sold as is, see pictures. The systems were fully functional until dismantling. Iedpszwlvcsfx Ah Eotl The systems are available immediately. The Darwin series is a range of centrifugal dust extractors for cleaning air containing oil-based mists, micro-mists, and vapors that are generated during the use of coolants (emulsions and neat oils). It can be used on all types of machine tools and in all machining processes. The Darwin series uses a double combination of filtration: dynamic (through the rotation of the centrifuge) and static (with the integrated post-filtration system) to guarantee high performance.

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: P-30010522, Technical characteristics: Work Area - Maximum clamping plate diameter: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse Z: 30 m/min - Standard closed automation (number of loading nests by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026, Size 6 !!! Brand new, replaced in 2024 !!! - Maximum speed: 4,500 rpm - Power, 100% / 40% duty cycle: 18 / 27 kW - Torque, 100% / 40% duty cycle: 202 / 303 Nm Tool Turret with Driven Tools - Tool holders with cylindrical shank to DIN 69880: 12 - VDI40 - Number of turret stations: 12 - Maximum tool length (including holder): 190 mm - Maximum speed: 6,000 rpm - Maximum torque: 37 Nm (10% duty cycle), 26 Nm (25% duty cycle), 14 Nm (100% duty cycle) Electrical Equipment - Operating voltage: 400 – 480 V - Connected load: 42 kW Dimensions - Overall dimensions: Length = 2,680 mm (3,820 mm with chip conveyor), Width = 2,040 mm, Height = 2,400 mm - Weight: 6,500 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading Itodpfxjxxkh Ts Ah Ejl - CNC control: GE Fanuc Series 18i TB - High precision: Positioning accuracy in X and Z axes ±0.001 mm (Heidenhain linear scales) - Main spindle: High power and broad speed range - Automated loading/unloading: Integrated automation system for part feeding and removal - Driven tools: Capability for drilling and milling operations - Chip conveyor - Documentation: Electronic unavailable, partial hard copy/manual available Machine status: NOT WORKING - Hydraulic solenoid valves: 4 units - Coolant (emulsion) pump defective

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 6034, travel distance X-axis: 7,200 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 45 kVA, controller manufacturer: HEIDENHAIN, controller model: Bahnsteuerung iTNC 530, total height: 2,900 mm, total length: 12,500 mm, total width: 4,810 mm, overall weight: 14,000 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, operating pressure: 7 bar, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 Iedpfjyzxfnjx Ah Eetl • Year of manufacture: 04/2008 • Control: HEIDENHAIN path control iTNC 530 • 4 axes • Travel paths X / Y / Z axis: 7200 / 450 / 590 mm • Working area X / Y / Z axis: 7000 / 400 / 350 mm • Weight: 14 t Equipment: - Robust base frame in welded steel construction - Ball rail guides on all axes - Milling spindle unit: 100 - 12,000 rpm, tool mounting SK 40 Drives: - X-axis (50 m/min) via rack and pinion drive - Y/Z-axis (25 m/min) via ball screw drive - B-axis: 9000°/min - Swiveling control panel - Automatic central lubrication - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication system Technical Data: - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse X-Y-Z: 50 – 25 – 25 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc-type changer with 12 SK 40 stations - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant device: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed adjustment: 80 – 120% - Drilling capacity in St 60 / aluminum: up to 28 mm Ø - Thread cutting capacity in St 60 / aluminum: up to M24 - Measurement system: rotary encoder/linear measurement system - Positioning accuracy: 0.025 mm - Repeat accuracy: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel range X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement including safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 tons - Sound emission: average sound pressure level 79 dB (A)

Condition: used, Year of construction: 2018, operating hours: 6,700 h, type of input current: three-phase, suction capacity: 5,000 m³/h, negative pressure: 3,100 Pa, Oil mist extraction for workshops – Plug & Play filtration tower for extracting oil mist during the emission of cooling lubricants. IVAT Ölnebel-T5K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapors. Industrial hall ventilation and filtration: numerous manufacturing processes, especially in metalworking, generate substantial oil mist. Very often, extractor systems for coolant recovery integrated into machines are either insufficiently effective or simply not installed. Machine retooling, frequent opening of enclosures, or lack of guarding around machining heads leads to the release of oil mist into working areas, exposing personnel to harmful vapors and mists. Installing a ventilation tower significantly improves air quality at workstations and is the ideal filtration supplement for workshop halls where comprehensive oil mist separation via coolant recovery units is difficult or impossible to achieve. Features automatic air and temperature monitoring in the room. An innovative PLC control system compares input data, detects threshold exceedances in the working area and heat buildup directly under the ceiling, and automatically regulates air quality and temperature. Performance: up to 5,000 m³/h Negative pressure: up to 3,100 Pa Filtration surface: 9 m² Itsdpfsxxh Tasx Ah Ejl Fan power: 3 kW Year of manufacture: 2018 Operating hours: 6,700 Several units of this device available.

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: MW137, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of positions: 12 lower turret stations, all driven Itodpfsxxh Udsx Ah Esl - Maximum speed: 4,500 rpm; Milling spindle power: 4.5 kW Electrical Equipment - Operating voltage: 400V (3-phase), fuse protection: 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm; Weight: 5,500 kg Main Features and Capabilities: - Horizontal design: Optimal chip evacuation, parts catcher + custom-made conveyor belt - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Swarf (chip) extraction conveyor - Fire suppression system - Tool measuring system (Q SETTER) - Broken tool detection: Load monitoring with auto-learning analyzer via OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Electronic and print manual available Optional: - Bar feeder: FMB Model: Turbo 10-72XT/3200/A - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm; Weight: 1,500 kg Machine status: NOT OPERATIONAL - X-axis encoder: faulty

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: 840 Dsl - GROB4Pilot, _____ Description: Year of manuf. : 2020 Control : Siemens 840 Dsl - GROB4Pilot Speed : 16000 rpm Movement X/Y/Z : 1050/800/1050 mm Tool holder : HSK 63 In General: Year of manufacture:2020 Control system:Siemens 840 Dsl – GROB4Pilot Travel ranges X/Y/Z:1,050/800/1,050 mm Speed:16,000 rpm Tool holder:HSK 63 Fluid supply:coolant + blast air Spindle: Technology:Direct drive spindle Speed:16,000 rpm Max. torque:206 Nm Max. power:32 kW Tool holder:HSK 63 NC rotary table: Technology:NC rotary table with pallet clamping system B-axis:0.001° Pallet size:630 x 800 mm (630 x 630 mm) Fluid connections:6 Tool magazin: Technology:4-disc magazine Number of stations:237 Tool changer:Pick-up Tool cleaning:Mechanical Equipment: Position measurement systems:Direct on all axes (glass scales) Chip removal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Hydraulic clamping:4 clamping circuits, 30–190 bar Itjdozu H Afspfx Ah Eel Support control:Pneumatic Touch probe:Renishaw OMP 60 Tool measurement:Length measurement Set-up bay door:Can be operated automatically or manually Emulsion mist separator:Mechanical Pallets I:2 pieces 630 x 800 mm Pallets II:2 pieces 630 x 630 mm

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 107786, Technical characteristics: Work Area - Maximum clamping plate diameter: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse in Z: 30 m/min - Standard closed automation (number of loading stations per workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle as per DIN 55026: Size A5 - Max. speed: 6000 rpm - Power at 100 / 40% duty cycle: 18.1 / 13.9 kW - Torque at 100 / 40% duty cycle: 77 / 59 Nm Tool Turret with Driven Tools - Toolholders per DIN 69880: 12 × BMT65 - Number of stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 27 Nm; 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V, 80 A - Connected load: 27 kVA Dimensions - Overall dimensions: Length = 4350 mm (with chip conveyor), Width = 1600 mm, Height = 2500 mm - Weight: 5500 kg Main Features and Capabilities: - Vertical construction: optimal chip evacuation and easy part loading/unloading - Control: GE Fanuc FS 32i B - High precision: positioning accuracy in X and Z axes ±0.001 mm (Heidenhain linear scales) Itodpjxw Slkefx Ah Esl - Main spindle: high power and wide speed range - In-process control: Marposs T25 measurement probe - Automated loading/unloading: integrated automation feeds and removes workpieces - Driven tools: enhances machining capabilities for drilling and milling - Tool life monitoring with sister tool management - Chip conveyor - Fully enclosed work area; workspace lighting - Documentation: Electronic available; physical manual incomplete Machine Condition: NOT WORKING - Operator panel touchscreen needs replacement - Hydraulic cylinder for loading door broken - Emulsion pump - Hydraulic pump - Spindle clamp/unclamp sensor - Hydraulic accumulator - Turret motor

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: P177ZG753, Technical characteristics: # Machining Workspace: X 500 mm; Y 400 mm; Z 330 mm # Axis Description: 3 LINEAR AXES (X, Y, Z) + 1 rotary table axis (A-axis) with index dividing head, direct angular measurement system, number of revolutions 50 min⁻¹, accuracy +/- 5" # A-axis Swivel Range: +/-170˚ # Maximum Clamping/Workpiece Dimensions: 650 x 400 mm; max. weight 300 kg # Rapid Traverse: X/Y/Z 54 m/min # Spindle Speed: 100–10,000 rpm, spindle motor power 11 kW # Spindle Taper: BBT30 (with internal cooling) # Automatic Tool Changer: 1x21 tools, chip-to-chip average time 1.5 sec # Maximum Tool Size: Ø40 mm / length max. 200 mm / 2 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed Power: approx. 20 kVA / 22A Dimensions: # Installation space: approx. 1.65 x 3.2 m (with chip conveyor) x 2.8 m # Weight: approx. 8,500 kg Equipment includes: # This 4-axis FANUC Robodrill α-D21LiB5 was manufactured in 2016. Ideal for precision machining, this vertical machining centre offers robust performance and reliability. # CNC Control: Model 31i model b5 # 4th axis and tailstock: Fanuc DDR-TiB 178DU039 2017/08 and TSUDAKOMA tailstock # Chip extractor & coolant filtration unit max. 40 bar: Mosnic model 1641/2010 # Spindle, Guideways, and Electrical Cabinet Cooling Systems # Oil Vapor Absorption/Recovery System: Bristol model B 1000 EF Itedpfxsxxt Ehs Ah Eel # Fire suppression: Kraft & Bauer # Part presence detection: with low pressure air sensors # Automation: Lateral door automatic and interface ready for automation # In-process inspection: Renishaw TRS2 # Documentation: incomplete Machine condition: NOT WORKING # Hydraulic unit defective # Two emulsion pumps # Guideway lubrication pump # Safety switch Euchner

Condition: used, Year of construction: 2018, operating hours: 4,500 h, MT Cut UDS1785 Travel distances: X 850 mm Y 520 mm Z 610 mm Tool interface: HSK 63 Rapid traverse rate X/Y/Z: 32 m/min Tool magazine: 60 positions Machine weight: 6,800 kg Control system: Heidenhain TNC 640 Itodpfxsy Ug Eps Ah Eol Coolant through tool, 50 bar Spindle speed: max. 12000 rpm Articulated band conveyor, discharge to the left Air through the spindle BLUM A2, laser system for tool measurement Measuring probe: Heidenhain TS 460 Rotoclear, rotating viewing window Emulsion mist extraction, SARA UC2D Year of manufacture: 2018 Spindle operating hours: 4512

Condition: good (used), Year of construction: 2008, Universal machining center: Fahrständer Machine type: AXA VHC 2 - 1760 XTS Control: Siemens 840 D ShopMill Year: 2008 SPECIFICATIONS Travel X-Axis: 1.760 (2 x 630) mm Y-Axis: 600 mm Z-Axis: 800 horizontal oder 770 vertikal mm A-Axes B-Axes: +/- 100°, hydraulisch geklemmt, stufenlos interpolierend Rapid motion: (X/Y/Z): 40 / 40 / 30 m/min. Amount of controlled axes: 5 Spindle speeds: 30 - 6.000 rpm Spindle power: 30 kW Itsdpfx Ahszimr Ae Eel Torque: 143 Nm Tool: SK 40 Toolchanger Tool capacity: 36 NC rotary table: AXA RTA 4L-520 face plate: Ø 520, für vertikalen & horizontalen Aufbau mm Tailstock: manuell, Spitzenhöhe 280 mm Machine weight: 12.000 kg Req. space (LxBxH): 5,2 x 3,4 x 3,3 m Equipment Internal cooling: 30 bar Chip conveyor: links abwerfend, integrierter 200 l Kühlmittelbehälter cooling system Cooling tank: 400 l Caliper: 3 D, Renishaw RMP 60 mit RMI Empfänger (kabellose Ausführung) wahlweise Verwendung der Aussenkühlung mit Durckluft oder Emulsion Direct linear scales: Heidenhain Working mode: 4 Flachführungen gehärtet Gegenführungen mit Gleitbelag (Turcite) beschichtet Erneuerung des Gleitbelag des Grundschlittens X/Y in 2022.

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: P-30010521, Technical specifications: Work Area - Maximum diameter of clamping plate: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse in Z: 30 m/min Isdpfxexxt D Ro Ah Ejtl - Y-axis travel: 40 mm / Rapid traverse in Y: 30 m/min - Standard closed automation (number of loading magazines by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026: Size 6 - Maximum spindle speed: 4500 rpm - Power at 100% / 40% duty cycle: 18 / 27 kW - Torque at 100% / 40% duty cycle: 202 / 303 Nm Tool Turret with Driven Tools - Tool holder for cylindrical shank DIN 69880: 12 - VDI40 - Number of turret stations: 12 - Max. tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 37 Nm, 25% duty cycle: 26 Nm, 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V - Connected load: 42 kW Dimensions - Total machine dimensions: Length = 2680 mm (3820 mm with chip conveyor), Width = 2040 mm, Height = 2400 mm - Weight: 6500 kg Main Features and Capabilities - Vertical design: Enables optimal chip removal and easy loading/unloading - Control system: GE Fanuc Series 18i TB - High precision: Positioning accuracy on X/Z axes is ±0.001 mm thanks to Heidenhain linear scales - Main spindle: High power and wide speed range - Automated loading/unloading: Parts are loaded and unloaded via integrated automation - Driven tools: Enables drilling and milling operations - Chip conveyor - Documentation: Electronic version not available, printed manual incomplete Machine status: NOT WORKING - Spindle drive - X-axis linear scale - Safety access door (Euchner) - Emulsion solenoid valves x2