Used Donaldson for sale (40)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, overall weight: 2,000 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,200 mm, total height: 4,250 mm, filter area: 286 m², suction capacity: 18,000 m³/h, negative pressure: 3,500 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-operated for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Dcsdpez Ayv Usfx Ailen Model: DFPRO 16 Year of manufacture: 2010 Cartridge filter elements, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Fan power: 18.5 Kw Fan model: FR 501 Built-in frequency converter. Remote monitoring of the device is possible thanks to Donaldson's iCue technology. Capacity up to 18000 m3/h Inlet diameter: 630 mm Noise silencer included. New filter elements, custom-made according to the device's intended use, are also available on request. Stock number: 1155

Condition: used, Year of construction: 2012, functionality: fully functional, Equipment: type plate available, The Donaldson Torit dust extraction unit DFO 4-16 can be used for welding, cutting, and grinding. It is a non-ATEX unit. The accompanying fan is an ART 632 with a 22 kW motor (non-ATEX), designed for a flow rate of 16,500 m3/h. Dcodpfx Aiezwclzelon It was previously used in one of our factories for welding fume extraction. It has since been replaced by dilution systems and is therefore no longer needed.

Condition: used, Year of construction: 1999, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, filter area: 286 m², suction capacity: 7,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit, self-cleaning filter, pneumatic, vacuum-operated for continuous operation, from the renowned Donaldson Torit brand. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and for all types of dry dust. The fan is located behind the filter on the clean air side, minimizing the risk of explosion. The filter cartridges are pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Fan power: 9 kW Flow rate: 7000 m3/h Inlet diameter: 350 mm Number of filter cartridges: 12 Filtration area: 286.8 m2 Year of manufacture: 1999 Dimensions: Width: 2.10 m Depth: 2.50 m Height: 3.37 m Base: 2.11 m x 1.52 m Stock number: 1171 Dodpfx Ajz Hkgisilecn

Year of construction: 2015, condition: used, A Donaldson dust collector for manual grinding workstations is offered. Airflow: 12000m³/h, negative pressure: 3200Pa, number of filter elements: 16, filter area: 336m², motor power: 30kW, speed: 2945rpm, operating point: 12000m³/h at 4450Pa and 23.8kW. Equipped with fan EUM 600/400-2, year of manufacture 2015, and electric motor type 200 L/2, 2-pole, 30kW, 50Hz. Airflow: 7500/18900m³/h, pressure: 6200/3900Pa. Dcodpfx Aez Dkixoilsn

Condition: used, Year of construction: 2015, Manufacturer: Donaldson Model : TDP450 Year : 2015 Type : Dust collector Filter area: 20.6 m² (Fibra Web) / 42 m² (Ultra Web) Filter area: 20.6 m² (Fibra Web) / 42 m² (Ultra Web) Power : 3 kW Required pressure: 6 bar Dcedpfx Aiezz Thnjljn 2 new Ultra Web filters Cleaning filters using compressed air Dimensions: 100 x 130 x 290 cm Weight : 350 kg

Condition: used, Year of construction: 2011, functionality: fully functional, Donaldson DCE Torit DMC-MMC filter oil mist separator, oil separator, oil extractor, air filter Year of manufacture: 2011 Connection: 400V, 1.5KW Dedpoxri T Usfx Ailscn Fully functional condition, see pictures Forklift available for loading Collection only by appointment in 75053 Gondelsheim Shipping by freight forwarding possible, please inquire with postal code

Condition: used, Year of construction: 2005, type of input current: three-phase, filter area: 286.8 m², suction capacity: 12,000 m³/h, Dust extraction, welding fume extractor, self-cleaning pneumatic vacuum filter for continuous operation from the renowned brand Donaldson Torit. Suitable for plasma, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located after the filter on the clean side, significantly reducing explosion risk. Ultra Web filter cartridges are pneumatically cleaned with compressed air impulses during operation for high device efficiency. Fan power: 15 kW Capacity: 12,000 m3/h Connection diameter: 315 mm Filter cartridges: 12 pcs. Filter surface area: 286.8 m2 Year of manufacture: 2005 Dodpjxxkzmjfx Ailscn Equipped with 'SparkTrap' spark arrestor system. Stock number: 1044

Condition: used, Year of construction: 2008, type of input current: three-phase, filter area: 252 m², suction capacity: 16,000 m³/h, Extraction unit, dust collector, work station Donaldson Torit ECB-2. The ECB work station is ideal for finishing work on large components with irregular shapes. This efficient, flexible, and cost-effective self-contained workstation is engineered to remove fine airborne dust without restricting operator movement or visibility. Thanks to Donaldson’s patented filter media, no other standalone workstation offers a more effective or efficient dust filtration system. The Donaldson ECB is a budget-friendly choice for autonomous workstations. There is no need for duct installation, which reduces installation costs. The ECB further saves costs by recirculating cleaned air, helping to reduce energy expenses. Operators can be more productive when working in a cleaner and safer environment. Designed as a standalone unit, the Donaldson ECB booth is the ideal solution for work environments that require maximum flexibility. It can boost productivity by adapting to the requirements of almost any task, and is easy to relocate, allowing for adjustment to changes in plant layout. Brand: Donaldson Torit Model: ECB-2 Year of manufacture: 2008 Specifications: EX fans – 2 x 4 kW Capacity – 2 x 8,000 m³/h (16,000 m³/h total) Option to operate with a single fan Filtration area – 252 m² Dedpex Hf Rnofx Ailscn Donaldson Ultra WEB filter cartridges – 12 pcs Inventory number: 1041

Condition: excellent (used), Year of construction: 2018, PROD. DONALDSON TYPE DV5500AP S/N 154/22481/05 YEAR 2018 POWER (kW) 10.8 CAPACITY (m3/min) 91.67 PRESSURE (bar) 16 HOURS (RUNNING/TOTAL) Dcodpozc Iz Tjfx Ailsn INVERTER BUILT-IN DRYER R134a 17.0kg EXCHANGER COOLED (AIR/WATER) ON TANK DOCUMENTS no CONNECTION NEW/USED USED

Year of construction: 2017, condition: excellent (used), SCAIME bag pourer with Donaldson stainless steel filter Year: 2017 Dedperfzdljfx Ailocn

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 875 kg, volume flow: 2,750 m³/h, Donaldson dry extraction unit for sale Capacity: Q 2.750 m³/h 5,5 KW further technical data see pictures Dcsdpeulgl Iofx Ailjn Condition very good. Can be viewed at any time

Condition: excellent (used), Year of construction: 2015, MANUFACTURER: DONALDSON TYPE: DC0450AB S/N: 150011899 YEAR: 2015 POWER (kW): 0.8 CAPACITY (m3/min): 7.5 PRESSURE (bar): 14 OPERATING HOURS (DOC/TOTAL): FREQUENCY INVERTER: BUILT-IN DRYER: R407C 1.15kg HEAT EXCHANGER: Djdexyauxjpfx Ailocn COOLED (AIR/WATER): MOUNTED ON TANK: DOCUMENTATION: no CONNECTION: 2 NEW/USED: USED

Condition: good (used), Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter ultrafiltration system for compressed air compressor condensate Dodpfxoidx Uie Ailocn Oil/water separator for compressed air condensate ● Treatment system for separating compressed air condensate and condensates with difficult separation properties (e.g., stable emulsions) using cross-flow filtration. ● Physical separation principle guarantees residual oil content of < 5 mg/l in water. ● Intelligent control concept with programmable controller for safe system operation, including plain text display via a text display, fault monitoring via alarm messages with potential-free contacts and optional external network connection. ● Optimized cleaning by comparing input/output, which extends cleaning intervals and saves operating costs. ● Thermally and chemically highly resistant ceramic membrane with a long service life. ● Frost protection with integrated heater. ● High-quality, corrosion-resistant materials for tanks, pipelines, pumps, seals, and valves. Manufacturer: Donaldson Ultrafilter System type: ultraaqua autoclean 0016 AC Electrical data: 3 x 380 V, 50 Hz, 2.6 kW Compressed air: pmin: 5.5 bar, pmax: 8.5 bar, Pneurop 4 Water: pmax: 5 bar Membrane: pHmin: 1, pHmax: 11, tmin: 5°C, tmax: 70°C You can find other filtration systems in different sizes – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2020, MANUFACTURER: DONALDSON Dcsdpfx Aoxyaureiljn TYPE: DC0550AB SERIAL NO: 200020860 YEAR: 2020 POWER (kW): 1.11 CAPACITY (m3/min): 9.17 PRESSURE (bar): 14 HOURS (DOC/TOTAL) INVERTER INTEGRATED DRYER: R407C 1.15 kg

Condition: used, volume flow: 7,500 m³/h, Oil mist extractor for CNC machines, Donaldson Torit brand filter separator. The unit is designed for filtration of oil mist (emulsions as well as pure oil), vapors and fumes generated by various metal cutting processes. Filtration efficiency reaches 99.97% Dedpsxd Ry Hefx Ailocn Model: DMC-D2 Fan power: 7.5 kW Capacity: 7,500 m3/h Filtration area: 40.8 m2 Filter cartridges in very good condition. Stock no.: 1043

Condition: used, Donaldson Torit DCE ventilation filter, insert filter Type: DLMV8/7S Dcsdpoxc Iyuefx Ailjn Includes 12 filter racks, each 1 meter long See our other advertisements VMA Wekerom

Condition: used, machine/vehicle number: 008705, Overall length: 2099 mm Overall width: 1138 mm Dedpfxszq Utdj Ailocn No of Filter sleeves: 16

Condition: ready for operation (used), Year of construction: 2015, Length: 9401mm, width: 2091mm, height: 5668mm, weight: 8.816t, with pipes and documentation, the dust collector was not used much. Dcsdok Ea Uujpfx Ailon

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, filter area: 16.5 m², suction capacity: 2,400 m³/h, Equipment: type plate available, Dust extraction unit, Donaldson Torit brand, vacuum filter, dust collector for extracting metal, mineral, and hard fiber dust, and for effectively collecting process dust. Donaldson Torit Vibra Shake is a self-cleaning dust extraction unit for intermittent applications where high collection efficiency is important, e.g., recovery of precious metals. Two-stage filter cartridge for high-performance filtration of both coarse and fine dust. The filter screen captures coarse and fibrous particles. The vacuum fan is located behind the filter on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit Model: VS 1500 (Vibra Shake) Fan power: 3 kW Capacity: 2400 m3/h Djdpfx Aijy Sz Dnolecn Filtration area: 16.5 m2 Inlet diameter: 180 mm Stock number: 1140

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Dcsdpfxjr A El Es Ailjn Connection: DN 80 Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. "Loose adhesion on the lower part of the dished end" (pictures to follow)

Condition: used, Year of construction: 2009, Overview  Dcedpfx Ajyb Th Aoilon This oil separator was manufactured in 2009 by the German company Donaldson Filtration GmbH. The UFA-AC0016M model was part of a compressed air installation operating with two Atlas Copco GA132 VSD low-pressure compressors. The unit is still installed and connected, has been maintained regularly, with the latest maintenance completed in August 2025, and is immediately available for sale. It can be visited on request. Technical data  - Air operating pressure: 5.5 – 8.5 bar - Water operating pressure: 3 – 5 bar - Condensate operating pressure: up to 10 bar - Operating temperature: 4 – 70 °C

Condition: good (used), Year of construction: 1996, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: Donaldson Torit, filter system for extraction system -Type: IDFP2 Dedpfxezyt Irs Ailjcn -Cartridge filter: see photos -Inlet/Outlet: Ø400 mm / Ø250 mm -Extraction capacity: 2500 m³/h -Pressure: 2370 Pa -Motor power: 3 kW -Filter dimensions: 1800/1200/H1780 mm -Weight of filter: 350 kg -Blower dimensions: 600/750/H1070 mm -Blower weight: 75 kg

Condition: used, Year of construction: 2014, Refrigeration dryer Donaldson DV 1800 AP max. pressure 16bar Dodpfx Ajq Sp A Ejilscn Motor 3,1 KW Year of construction 2014 The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!

Year of construction: 1998, condition: used, Technical details: total power requirement: 1,1 kw volume capacity: 900 m³/h filter surface area: 6,0 m² filter: 1 Stück weight of the machine approx.: 125 kg dimensions L x W x H: 0,74 x 0,62 x 1,8 m Djdju N Ad Nepfx Ailscn Applications: Suction of grinding dust, with other filter inserts is also welding smoke extraction possible - mobile device with rolls - with collecting container for coarse particles - cleaning interval adjustable up to 60 sec - Impulse cleaning, automatically after switching off the system - filtering separator Further technical data: - separation area 6.0 m² - separation rate above 99% - cleaned air remains in the working chamber - in the device is cartridge filter Ø 400mm, length 270mm - filter change manual by hand (maintenance door) *

Condition: used, filter area: 42 m², suction capacity: 1,750 m³/h, Suitable for welding, grinding, sandblasting, and all types of dry dust. The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high device efficiency. Fan power: 1.1 kW – single-phase Capacity: 1,750 m3/h Large filtration area – 42 m2 HEPA filter for precise air purification Dcedpfx Aey Hhcajilsn Mechanical spark arrester Stock no.: 1118