Used Emulsion for sale (298)

Condition: used, Year of construction: 2012, controller manufacturer: Fanuc, controller model: MXP-200FP - ManualGuide, _____ Description: Year of manuf. : 2012 Control : Fanuc MXP-200FP - ManualGuide Speed : 6000 rpm Movement X/Y/Z : 2100/1020/762 mm Tool holder : SK 50 In General: Year of manufacture:2012 Control system:Fanuc MXP-200FP ManualGuide Traverse paths X/Y/Z:2,100/1020/762 mm Spindle speed:6,000 rpm Tool holder:SK 50 Clamping surface:2,300 x 1020 mm Spindle: Technology:Geared spindle Speed:6,000 rpm Max. power:approx. 22 kW Max. torque:approx. 550 Nm Tool holder:SK 50 Work table: Clamping surface:2,300 x 1020 mm Max. table load:3,000 kg T-slots:6x 22 mm, spacing 150 mm Tool magazin: Technology:Chain magazine Tool changer:Double gripper Number of stations:40 pieces Tool diameter max.:120/240 mm Tool length max.:350 mm Equipment: Kjdpfxszf T I Nj Ah Esdt Chip disposal: Chip conveyor Coolant supply:IKZ pump with filter Emulsion mist extraction:Mechanical Set-up mode:Electronic handwheel Accessories:2x magnetic clamping plate 800 x 400 mm Tool holders:Various SK 50 holders

Condition: used, Year of construction: 2011, controller manufacturer: Fanuc, controller model: 30i, _____ Description: Year of manuf. : 2011 Control : Fanuc 30i In General: Year of manufacture:2011 Control system:Fanuc 30i Maximum table load:100 kg Travel range X/Y/Z:300/300/370 mm Installation weight:approx. 33,000 kg Machining station I (X/Y/Z/B): Technology:1 x vertical spindle Speed:8,000 rpm Tool holder:HSK-A 63 Power:31 kW Torque:197 Nm Tool changer:12 stations B-axis:0.001°, pneumatic indexing, clamping force Tool diameter/length:125/250 mm Machining station II (X/Y/Z/B): Technology:1 x vertical spindle + 1 x horizontal spindle Speed:8,000 rpm Tool holder:HSK-A 63 Power:31 kW Torque:197 Nm Tool changer:12 stations B-axis:0.001°, pneumatic indexing, clamping force Tool diameter/length:125/250 mm Machining station III (X/Y/Z/B): Technology:1 x vertical spindle Speed:8,000 rpm Tool holder:HSK-A 63 Power:31 kW Torque:197 Nm Tool changer:12 stations B-axis:0.001°, pneumatic indexing, clamping force Tool diameter/length:125/250 mm Machining station IV (X/Y/Z/B): Technology:1 x vertical spindle + 1 x horizontal spindle Speed:8,000 rpm Tool holder:HSK-A 63 Power:31 kW Torque:197 Nm Tool changer:12 stations B-axis:0.001°, pneumatic indexing, clamping force Tool diameter/length:125/250 mm Loading station: Numbers:2 pieces (front and rear) Equipment: Position measurement systems:Direct on all axes Kdjdozfu Rfjpfx Ah Est Chip removal:Chip conveyor Coolant supply:IKZ system, 30 bar Tool breakage monitoring:Artis, type CTM V5 Zero-point clamping system:Erowa Emulsion mist separator:Reven

Condition: used, This listing is for a IKA Eurostar PWR CV Overhead Stirrer. The unit is in full working condition and is ready for immediate release. The IKA Eurostar PWR CV Overhead Stirrer is an efficient laboratory device specifically designed for various stirring tasks, excelling in mixing both high and low viscosity substances. This stirrer is part of the comprehensive IKA Eurostar series, which offers diverse models tailored to different laboratory needs. Key Features: Speed Range: Features a versatile speed range of rpm, with automatic adjustments made possible through advanced microprocessor-controlled technology. Safety Circuits: Equipped with built-in safety circuits that provide automatic cut-off in cases of anti-stall or overload conditions, ensuring user safety and equipment protection. Constant Speed: Maintains a steady speed regardless of viscosity changes in the sample, as it continuously compares the actual shaft speed with the set speed for optimal performance. Stirring Quantity: The EuroStar 20 model can handle a maximum stirring quantity of 15 litres (H2O), making it suitable for larger volumes. Torque: Delivers a maximum torque of 20 Ncm at the stirring shaft, providing sufficient power for effective mixing. Stirring Element Fastening: The stirring element is securely fastened using a chuck, ensuring stability during operation. Ksdpfx Asxxz S Aoh Ejdt Applications: Laboratory Use: Designed specifically for laboratory environments, making it ideal for routine stirring tasks. Mixing Substances: Capable of efficiently mixing a wide range of substances, whether they are of high or low viscosity, catering to diverse experimental needs. Intensive Mixing: Suitable for applications that demand intensive mixing, such as preparing emulsions or suspensions.

Condition: used, Year of construction: 2016, input voltage: 400 V, input frequency: 50 Hz, input current: 9 A, power: 4 kW (5.44 HP), We offer this used BEAR ERGO 100 planetary mixer, manufactured in 2016. BEAR ERGO 100 planetary mixing systems with accessory package and lift Complete package for food production For sale is a powerful production package consisting of two BEAR ERGO 100 planetary mixers, including extensive accessories, as well as an electric MaxiLift for ergonomic handling of the mixing bowls. Scope of delivery Planetary mixer 2 BEAR ERGO 100 planetary mixers Year of manufacture: 2016 100-liter mixing bowl volume Electric mixing bowl lift Variable speed control REMIX program memory Stainless steel design 400-volt connection, 4.0 kW drive power Accessories 10 100-liter stainless steel mixing bowls 10 mixing bowl trolleys 3 dough hooks (Bischof) 2 mixing beaters 2 scrapers Lift system 1 BEAR / Hovmand MaxiLift E160 Electric battery-powered lift Rotating fork with click-on system for 100-liter mixing bowls Maximum payload: 100 kg of ingredients in 100-liter mixing bowls Ergonomic lifting, transporting and emptying of mixing bowls Battery operation with integrated charger Application areas Ideally suited for: Meat and sausage production Delicatessen and convenience food production Vegetarian and vegan food Spreads and dips Baked goods and dough products Sauces, dressings and emulsions Advantages ✅ Immediately ready-to-use complete package ✅ High production capacity with 10 interchangeable mixing bowls ✅ Ergonomic mixing bowl handling with MaxiLift ✅ Proven BEAR industrial quality ✅ Hygienic stainless steel design ✅ Ideal for multiple production lines or shift operation Technical highlights BEAR ERGO 100 Mixing bowl volume: 100 liters Motor power: 4.0 kW Voltage: 400 V / 3 phases Electronic speed control Safety guard CE-compliant design Selling price Total package €39,000 net, negotiable consisting of: Kodpfx Ahezk Iwie Esdt 2 x BEAR ERGO 100 10 x 100-liter mixing bowls with trolley 3 x dough hooks 2 x mixing beaters 2 x scrapers 1 x MaxiLift E160 with mixing bowl holder Location: Ulrichsberg, Austria Contact: Thomas Neuburger Neuburger Fleischlos GmbH Inspection and test run possible by appointment. If you have any questions or require further information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 34,062 h, spindle speed (max.): 10,000 rpm, overall weight: 15,500 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, workpiece height (max.): 1,330 mm, spindle motor power: 28,000 W, number of slots in tool magazine: 120, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DMG DMC80U DuoBlock was manufactured in 2011. It features a maximum workpiece diameter of 800 mm and a height of 600 mm, with a load capacity of 800 kg per pallet. The machine is equipped with a dual pallet system and a rapid traverse rate of 60 m/min. If you are looking to get high-quality machining capabilities, consider the DMG DMC80U DuoBlock universal machining centre we have for sale. Contact us for further details. • Control: Heidenhain iTNC 530 3D path control • B-axis Travel: 180° (Universal milling head with controlled B-axis) • Spindle Type: Integrated motor spindle without gearbox • Spindle speed ranges: • Operating mode 1: 0–10,000 rpm • Operating mode 2: 0–800 rpm • Operating mode 3: 0–5,000 rpm • Spindle performance: • Spindle Power (40% Duty Cycle): 28 kW • Spindle Power (100% Duty Cycle): 19 kW • Spindle hours: 34,062 h • Machine on hours: 79,252 h • Spindle: New spindle installed end of 2025 • Table Type: NC rotary table with pallet carrier • Pallets Included: 2 pallets • Pallet Clamping Surface: 800 mm x 630 mm • Pallet T-slots: 14 mm per DIN 55201-A2 • Pallet Weight: 300 kg per pallet • Maximum Permissible Workpiece Weight on Pallet: 1,400 kg • Maximum Workpiece Height: 1,330 mm • Maximum Workpiece Diameter: 900 mm • Feed Rate (X/Y/Z): 0 - 60,000 mm/min • Axis Acceleration (X/Y/Z): 7 / 6.5 / 6.5 m/s² • Maximum Feed Force (X/Y): 13 kN Kdedpfxoy Egbls Ah Eet • Maximum Feed Force (Z): 9 kN • Linear Scale Resolution (X/Y/Z): 0.001 mm • Table Max Torque (40% duty cycle): 5,000 Nm • Table Holding Torque (40% / 100% duty cycle): 5,000 Nm / 3,660 Nm • Table Maximum Rotation: 35 rpm • Pallet Changer Type: Rotary pallet changer • Measuring Probe: Heidenhain TS 649 DMG Infrared probe • Kinematics Verification: 3D quickSET toolkit • Chip Management: Chip conveyor • Mist Extraction System: Oil and emulsion mist extraction system with mechanical filter (1,600 m³/h flow rate) • Cooling Capacity (Machine / Cabinet): 3.3 kW / 1.0 kW • Electrical Connection Data: 86 kVA, 400 V, 50 Hz, Max Nominal Current 124 A • Workpiece dimensions (max): Diameter 800 mm, height 600 mm • Feed force (X/Y/Z): 10 kN • Rapid traverse: 60 m/min • Tool Holder Taper: SK 50 per DIN 69871 Form AD / Form B • Tool Clamping Pull Stud: DIN 69872 Form A / Form B or ISO 7388/2 Typ B • Tool Clamping Mechanism: Mechanical via spring force, hydraulic release • Tool Magazine Capacity: 120 slots (vertical chain magazine) • Delivery: January 2027 Additional equipment • Dual pallet changer system • Internal coolant supply (ICS) with 980 l tank and band filter (40 bar through spindle center) • Clamping hydraulics • Infrared measuring probe Technical Specification Taper Size SK 50 Through-spindle Coolant Yes

Condition: used, Year of construction: 2010, volume flow: 1,500 m³/h, suction capacity: 1,500 m³/h, Hönag Type 1500 Filter, Extraction, Air Filter, Emulsion Mist Separator Used, as shown in the pictures From stock (may show signs of storage) For further technical information, please refer to the pictures. Scope of delivery as shown in the pictures. With invoice. The invoice will be enclosed with the shipment. Payment method: Bank transfer Kjdpjzkax Eofx Ah Esdt Self-collection Information about bank details, payment terms, etc., will be sent by email. W117

Condition: used, We offer a used KARL SCHNELL 119 FD 225 D emulsifier – an industrial machine designed for continuous cutting, emulsifying, homogenizing and grinding of food products. The machine is suitable for meat processing plants, fish processing plants, production of fillings, pâtés, sauces, pastes, delicatessen products and convenience food. The KARL SCHNELL 119 FD 225 D belongs to the FD series of inline emulsifiers. Machines of this type are used wherever a very fine, uniform and stable product structure is required. The FD series is designed for high-quality emulsification and can be adapted with suitable cutting tools and drive configurations depending on the processed product. The heart of KARL SCHNELL emulsifiers is the KS cutting system, which enables intensive product size reduction in a continuous process. Depending on the application, this type of machine can operate with different cutting tool configurations, including knife systems with perforated plates. This allows the machine to be adapted to products with different structures, viscosity and technological requirements. The inline cutter operates continuously – the product is fed into the working chamber, passes through the cutting system and is discharged as a finely cut or emulsified mass. This solution helps increase production efficiency, reduce manual work and achieve repeatable product quality in subsequent batches. The machine can be used as a standalone unit or as part of a larger technological line, for example after preliminary grinding, mixing or bowl cutting. The KARL SCHNELL 119 FD 225 D is a good solution for plants looking for an efficient inline emulsifier for industrial food production. Kodpfx Aezi U Rmjh Eodt Technical data: Manufacturer: KARL SCHNELL Model: 119 FD 225 D Machine type: emulsifier Power: 74 kW / 100 HP Power supply: 400 V Frequency: 50 Hz Motor speed: 2975 rpm Control cabinet operating voltage: 3 × 400 V / 50 Hz Control voltage: 230 V AC Construction: stainless steel Application: cutting, homogenization and emulsification of food product Main advantages: continuous inline operation high power of 74 kW motor speed 2975 rpm intensive cutting and emulsification of product possibility of obtaining a fine and homogeneous mass structure suitable for fillings, emulsions, pâtés, sauces and pastes can operate as a standalone machine or as part of a technological line solid industrial construction stainless steel construction renowned manufacturer KARL SCHNELL solution for continuous production in food processing plants

Condition: excellent (used), Year of construction: 2012, LICON Type: LiFLEX 1477 1U Year of manufacture: 2012 Control system: Siemens SINUMERIK 840D Solution Line with integrated PLC control S7-300. Technical data of the machine Max. travel in X: 1400 mm Max. travel in Y: 700 mm Max. travel in Z: 700 mm A-axis swivel range: 45° to –225° B-axis: 360° Acceleration: max. 5 m/s² Travel speed: max. 60 m/min Technical availability: 96% Motor spindle speed: max. 16,000 rpm Motor spindle: HSK 63 Integrated spindle Kjdpfozi E A Hex Ah Esdt Spindle motor: 25 kW at 100% duty cycle Tool holder: HSK 63 Licon - Tool magazine DTC 30 2 disc magazines - total 60 positions. Positioning via servo motor Tool length from spindle center: max. 400 mm Tool diameter with full occupancy: max. 90 mm Tool diameter with free spaces on the right and left: max. 200 mm Tool weight: max. 15 kg Tilting moment (HSK plane): max. 15 Nm Tool change time: approx. 5.0 sec up to 15 kg Pallet changer with zero-point clamping system. Control system: - SINUMERIK 840D Solution Line with integrated PLC control S7-300. - PCU 50.3-C: Intel Celeron M Mobile processor 1.5 GHz / 512 Mbyte / 1 Mbyte L2 cache / 400 MHz - Connection of decentralized modules such as inputs/outputs, motor starters, interfaces is carried out via Profibus. - Operator panel front OP012 with 12.1" TFT color display, 800 x 600 pixels (SVGA), - Machine control panel MCP 483C - Siemens motors of type 1FK7 are used for the feed axes. - Spindles are designed as main spindle motors 1PH7, 1PM6 or asynchronous motors, depending on the application. Coolant supply: Technical data: Tank capacity: approx. 1500 l, Filter capacity: approx. 300 l/min for emulsion, 1x rinsing pump (centrifugal pump) 3 bar approx. 150 l/min, 1x HD screw spindle pump 30 bar, approx. 80 l/min. and minimum quantity lubrication (MQL). Voltage supply: 400V, 3 phases, 50/60Hz, TN-S with a reliable neutral conductor. Total connected load: approx. 106 kW. Dimensions, see layout plan. Transport dimensions, machine only, without auxiliary units: Approx. length 830 cm, width 360 cm, height 330 cm, weight 28000 kg.

Condition: excellent (used), 5-Axis Machining Center with swivel milling head, pallet station, tool calibration, thermal compensation, work area extraction system, and much more. Year of manufacture: 2016 Spindle hours approx. 1,500 h (after spindle replacement at the beginning of 2025) Control System: - Heidenhain iTNC 530 HSCI - Heidenhain DCM Collision Monitoring - Heidenhain HR 410 electronic handwheel - Swiveling console with 19" monitor - Teleservice via LAN/WLAN Travel Range: - Travel X 1,000 mm, Y 1,100 mm, Z 810 mm - NC rotary table D 1,000 x 800 mm, swing diameter 1,350 mm Milling Head: - Automatic horizontal/vertical swivel milling head - Fully-fledged stepless NC axis from -1° to +90° - Blowing air through the spindle - External coolant supply via nozzle ring Drive power: 38 kW (100% duty cycle) Speed: 16,000 rpm Torque: 135 Nm at 40% duty cycle Spindle interface: HSK 63-A Media Supply: - Internal coolant feed: 50 bar - capacity 28 l/min - Paper belt filter with additional fine filter - Individual tool pressure regulation during program operation Tool Changer: - Rack magazine with 73 stations (expandable with additional racks) - Swiveling dialog operation panel - Drawer for loading and unloading tools from tool racks Tool Measurement: - 3D wireless touch probe m&h 20.00-Multi, software adapted for HSK 63-A - Including Kinematics-Opt, compatible with iTNC control, and calibration sphere on magnetic stand Pallet Changer: - Double palletizing unit, pallet diameter 1,000 x 800 mm, hole grid 100mm x 100mm, hardened drill bushes D 16mm - Rotary table unit including zero-point clamping system, loading station accessible by crane - Pallet changer unit protected with enclosure Special Equipment: - Micro-Epsilon sensor - For detection and dynamic compensation of thermal spindle growth Chip Conveyor: - Scraper belt conveyor along machine bed - Chip ejection height 1,100 mm Machine Enclosure: - Full-area protective enclosure with large angle door for crane loading and a quick-access door - Easy removal of swarf from the workspace Extraction System: - Oil and emulsion mist extraction, mechanical air filter, extraction capacity 1,800 m³/h Rotating View Window: - Viewing window integrated into the cabin door for workspace observation Camera in Work Area: - Monitor and keyboard at the operator console—allows monitoring of rear-side machining operations Machine Data: - Space requirement (without service area): approx. LxWxH 4,791 mm x 4,100 mm x 4,791 mm (including extraction system) - Machine weight approx. 19,700 kg - Total weight with all equipment plus maximum workpiece load, full tool magazine, and all operating materials: approx. 27,730 kg - Connected load: 50 kVA, 400V, 50/60 Hz Kdodpsxhg Dijfx Ah Ejt This machining center, featuring an exceptionally good and practical configuration, is in very good condition. It operates with the renowned "Swiss precision." There is no service or repair backlog—in fact, the opposite. With an almost new milling spindle, the REIDEN RX 10 5X is well positioned for long-term use. Technical modifications and errors excepted.

Condition: new, CNC hydraulic automatic bandsaw for cuts from 0° to 60° to the right, complying with all CE safety regulations. The machine features 9 programs, each consisting of 99 steps, for a total of approximately 890 cutting positions with corresponding piece counting. Operation: Material feed. Fixed clamp closure. Blade rotation and emulsion fluid dispensing; the saw head descends until the cut is complete, and the feed carriage returns to the set position. Saw head return, blade rotation stop, and coolant dispensing. Fixed clamp opening. Cycle repetition. Kdsdpfeg Np Dxox Ah Ejt Step-by-step feed via ball screw. Numerical control of cut quantity and length. Hydraulic power unit with cutting pressure adjustment. Blade tensioning achieved through manual rotation of the handwheel and guaranteed by an electromechanical device. Brush-type chip removal device. Bimetallic band saw blade 3010 x 27 x 0.9 mm. Hydraulic power unit motor 0.75 kW. Cutting thickness 1.2 mm. Material feed stroke 600 mm. Electric pump 0.09 kW.

Condition: refurbished (used), Automatic line for forging / hot stamping Installed after refurbishing in 2015 and having run for not more than 1,000 hours, condition is excellent. ➢ ADIGE CM 500 AUTOMATIC SAW ➢ 50 KW INDUCTION OVEN ➢ ELECTRONIC AUTOMATION SYSTEM ➢ VACCARI SCREW PRESS 180 screw diameter ➢ 10-POINT AUTOMATIC LUBRICATION SYSTEM ➢ BALCONI 50T TRIMMING PRESS ADIGE CM 500 AUTOMATIC SAWING MACHINE WITH 3.5-METER AUTOMATIC BAR LOADER Technical specifications: -Min./max. cutting capacity: 8 mm / 60 mm diameter -Standard cutting speed: ADIGE SALA. -Head motor power: (50 Hz) 2.2 kW -End-of-bar scrap equal to or shorter than the usable piece -Central hydraulic tank capacity: 200 liters -Cutting emulsion tank capacity: 50 liters -Weight: approx. 1,200 kg -Siemens electrical components 50 kW INDUCTION OVEN WITH 1 INDUCTOR (8–20 mm) with ELECTRONIC LOADING ARM For horizontal and vertical loading of work pieces Features a brushless motor, programmable axes, and press interpolation with electric axes; electronic components: Siemens Load capacity: 4 kg; vertical stroke: 80 mm; power supply: Electro-pneumatic VACCARI SCREW PRESS 180 screw diameter Technical specifications: -Screw diameter: 180 mm -Theoretical pressure: 300 tons -Table dimensions: 430 x 550 mm -Slide dimensions: 500 x 650 mm -Ram stroke: 350 mm -Distance between uprights below the guides: 450 mm -Distance between uprights within the guides: 350 mm -Max. height between table and ram: 650 mm -Strokes per minute: 35 -Table height under the guides: 300 mm -Main motor: hp 30 -Machine dimensions: 4100 x 2600 x 2200 mm -Approximate weight: 11,000 kg NEW SIEMENS S7 ELECTRICAL SYSTEM NEW PNEUMATIC SYSTEM NEW LUBRICATION SYSTEM BALCONI 50T TRIMMING PRESS Technical specifications: -Power: 50 tons -Table dimensions: 800 x 500 mm -Ram dimensions: 440 x 380 mm -Max. die height: 400 mm Kdsdpfx Aezcdlush Eot -Adjustable stroke: 100 mm -Strokes per minute: 35–100 -Main motor power: 5.5 kW

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: P-30010521, Technical specifications: Work Area - Maximum diameter of clamping plate: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse in Z: 30 m/min - Y-axis travel: 40 mm / Rapid traverse in Y: 30 m/min - Standard closed automation (number of loading magazines by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026: Size 6 - Maximum spindle speed: 4500 rpm - Power at 100% / 40% duty cycle: 18 / 27 kW - Torque at 100% / 40% duty cycle: 202 / 303 Nm Kdodoxxt D Rjpfx Ah Eet Tool Turret with Driven Tools - Tool holder for cylindrical shank DIN 69880: 12 - VDI40 - Number of turret stations: 12 - Max. tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 37 Nm, 25% duty cycle: 26 Nm, 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V - Connected load: 42 kW Dimensions - Total machine dimensions: Length = 2680 mm (3820 mm with chip conveyor), Width = 2040 mm, Height = 2400 mm - Weight: 6500 kg Main Features and Capabilities - Vertical design: Enables optimal chip removal and easy loading/unloading - Control system: GE Fanuc Series 18i TB - High precision: Positioning accuracy on X/Z axes is ±0.001 mm thanks to Heidenhain linear scales - Main spindle: High power and wide speed range - Automated loading/unloading: Parts are loaded and unloaded via integrated automation - Driven tools: Enables drilling and milling operations - Chip conveyor - Documentation: Electronic version not available, printed manual incomplete Machine status: NOT WORKING - Spindle drive - X-axis linear scale - Safety access door (Euchner) - Emulsion solenoid valves x2

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: P177ZG753, Technical characteristics: # Machining Workspace: X 500 mm; Y 400 mm; Z 330 mm # Axis Description: 3 LINEAR AXES (X, Y, Z) + 1 rotary table axis (A-axis) with index dividing head, direct angular measurement system, number of revolutions 50 min⁻¹, accuracy +/- 5" # A-axis Swivel Range: +/-170˚ # Maximum Clamping/Workpiece Dimensions: 650 x 400 mm; max. weight 300 kg # Rapid Traverse: X/Y/Z 54 m/min # Spindle Speed: 100–10,000 rpm, spindle motor power 11 kW # Spindle Taper: BBT30 (with internal cooling) # Automatic Tool Changer: 1x21 tools, chip-to-chip average time 1.5 sec # Maximum Tool Size: Ø40 mm / length max. 200 mm / 2 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed Power: approx. 20 kVA / 22A Dimensions: # Installation space: approx. 1.65 x 3.2 m (with chip conveyor) x 2.8 m # Weight: approx. 8,500 kg Equipment includes: # This 4-axis FANUC Robodrill α-D21LiB5 was manufactured in 2016. Ideal for precision machining, this vertical machining centre offers robust performance and reliability. # CNC Control: Model 31i model b5 # 4th axis and tailstock: Fanuc DDR-TiB 178DU039 2017/08 and TSUDAKOMA tailstock # Chip extractor & coolant filtration unit max. 40 bar: Mosnic model 1641/2010 # Spindle, Guideways, and Electrical Cabinet Cooling Systems # Oil Vapor Absorption/Recovery System: Bristol model B 1000 EF # Fire suppression: Kraft & Bauer # Part presence detection: with low pressure air sensors # Automation: Lateral door automatic and interface ready for automation # In-process inspection: Renishaw TRS2 # Documentation: incomplete Machine condition: NOT WORKING # Hydraulic unit defective Kedpoxxt Ehsfx Ah Eodt # Two emulsion pumps # Guideway lubrication pump # Safety switch Euchner

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 106374, Technical characteristics: Work Area - Chuck diameter: 160 mm - Maximum weight of chuck + workpiece: 45 kg - Maximum workpiece diameter/height: 100/400 mm - Distance spindle nose to origin of tailstock: 795.5 mm - X1/X2 working stroke: 340 mm / Rapid traverse in X: 30 m/min - Z1/Z2 stroke: 625 mm / Rapid traverse in Z: 30 m/min / Feed force: 18.7 kN - Loading time: 5–6 sec - Standard closed automation (number of loading nests by workpiece diameter): 14/(80–200 mm), 18/(30–160 mm), 30/(30–85 mm) Main Spindle - Spindle according to DIN 55026: Size KK5 - Maximum speed: 8,500 rpm - Power at 100% / 40% duty cycle: 34 / 26.5 kW - Torque at 100% / 40% duty cycle: 75 / 48 Nm Tailstock - Interface: MK3 - Clamping force: 120 N/bar - Clamping stroke: 5 mm Tool Holder with Motorized Tools - Tool holders with cylindrical shank according to DIN 69880: 12 – BMT65 - Number of positions: 2 x 12 (1 gripper per turret) - Maximum speed: 6,000 rpm - Maximum torque at 10% duty cycle: 27 Nm, at 100% duty cycle: 14 Nm Kjdpjxxtkwjfx Ah Esdt Electrical Equipment - Operating voltage: 400–480 V, 120 A - Connected load: 45 kVA Dimensions - Total dimensions: Length = 5,300 mm with chip conveyor, Width = 1,760 mm, Height = 3,650 mm - Weight: 7,500 kg Main Features and Capabilities - Vertical design: Optimized chip evacuation and automatic loading/unloading - Control: GE Fanuc FS 32i - High precision: Positioning accuracy on X and Z axes ±0.001 mm with Heidenhain linear scales - Main spindle: High power and wide speed range - Automation: EMAG O-type – Parts are loaded and unloaded automatically via integrated automation - Live tools: Allows drilling and milling operations - Tool life monitoring with sister tool management - Chip conveyor, coolant unit, switchable dual cartridge filter, high pressure pump (15 bar) - Fully enclosed working area, LED light in working area - Documentation: Available both electronically and as hardcopy book Machine Status: NOT WORKING - X-axis drive - Five electrical switches (Siemens) - Hydraulic pump - Operator panel (in stock, needs installation) - Valve chiller - Pressure switch for oiling unit - Emulsion tank pump - Four emulsion circuit switches (electrovalves) - Pressure switch for hydraulic circuit - Complete hydraulic block

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460038, Technical specifications: Machining workspace: X 300 mm; Y 500 (725) mm; Z 375 mm Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A), index dividing head - Direct measuring system, angular, rotation speed: max. 50 min⁻¹, accuracy: +/- 5'' Maximum clamping/part dimensions: Ø 575 x 830 mm; maximum weight: 360 kg Rapid traverse rates: X/Y/Z = 65/75/75 m/min; positioning accuracy Tp: 0.008 mm Spindle spacing: 300 mm Spindle speed range: 1–17,500 rpm Spindle taper: DIN 69893-HSK-A63 (internal coolant supply) Automatic tool changer: 2 x 32 positions; average chip-to-chip: 2.5 s Maximum tool diameter: Ø 75 mm; maximum tool length: 275 mm; maximum tool weight: 7.5 kg Electrical data: - Supply voltage: 3x400 V / 50 Hz - Installed power: approx. 85 kVA / 125 A Kedpfxexxrc Se Ah Eedt Machine dimensions: - Installation area: approx. 3.6 x 6 x 3.7 m - Weight: approx. 10,500 kg Equipment includes: - CNC control: Siemens 840D SL - Linear axis measuring systems: Heidenhain linear scales - Chip conveyor: Knoll Typ 550 K-1 - Oil cooling system - Shaft, guideway, and switch cabinet cooling system - 2 oil lubrication systems - Oil mist extraction/recovery system: IFS Vario E2000 (2,000 m³/h) - Fire protection: Kraft & Bauer - Workpiece presence detection (P/Y): Low pressure air sensors - In-process measurement: Marposs T25 - Tool breakage control and length measurement system: Inductive sensor (BRK) - Tool support detection in working spindle Machine status: NOT OPERATIONAL / NON-FUNCTIONAL Installed components: - Sensors for tool presence in spindle & part presence - Hydraulic pump - Hydraulic unit level & temperature sensors (Parker) - Tool magazine piston & sliding door system (2 units) - Communication module: Murr - A-axis position encoder - Hydraulic switches (Parker, 4 units) - Emulsion filtration unit is shared with another machine (SW BA321 2460038) - High-pressure pump from emulsion filtration system

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460039, Technical specifications: # Working area: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 1 rotary axis (A – rotary table with indexing head) - Direct angular measuring system with up to 50 rpm, accuracy +/- 5” # Maximum workpiece clamping dimension/weight: Ø575 x 830 mm / max. 360 kg # Rapid traverse: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Spindle center distance: 300 mm # Spindle speed: 1 – 17,500 rpm # Spindle interface: DIN 69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools; chip-to-chip average time: 2.5 sec # Maximum tool dimensions: Ø75 mm / length: max. 275 mm / up to 7.5 kg Electrical data: # Mains voltage: 3x400V / 50Hz # Connected load: approx. 85 kVA / 125A Dimensions: # Installation area: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear measuring systems: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 # Oil cooling system # Cooling system for shaft, guides, and control cabinet # 2 oil lubrication systems # Oil filtration system (up to 80 bar): Knoll VRF450-2450 (can supply 2 machines simultaneously) # Oil vapor extraction/recovery system: IFS Vario E2000 (2,000 m³/h) # Fire suppression system: Kraft & Bauer Kdsdoxxrnbjpfx Ah Est # Part detection P/Y: with low-pressure air monitors # In-process measurement: Marposs T25 # Tool breakage detection and length measurement: inductive sensor # Tool presence monitoring in spindle Machine status: NOT OPERATIONAL - Spindle tool and part presence sensors - Tool breakage sensors - Tool magazine piston and slide system door open/close (2 units) - Tool magazine pistons and tool retainer slide system (2 units) - A-axis position encoder - Inductive and magnetic sensors (4 units each) - Chip extraction conveyor requires repair - Chiller for spindle cooling/heat exchanger - Communication module Murr - X axis linear scale - Emulsion chip conveyor level sensor - Hydraulic pump - Motor for hydraulic pump (repairable) - Heat exchanger unit - Electric Siemens contactors for electrical cabinet (3 units) - Safety door lock Euchner - Emulsion filtration unit is shared with another machine (SW BA321 2460038) Note: Machine is NOT WORKING and offered as described.

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: P-30010522, Technical characteristics: Work Area - Maximum clamping plate diameter: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse Z: 30 m/min - Standard closed automation (number of loading nests by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026, Size 6 !!! Brand new, replaced in 2024 !!! - Maximum speed: 4,500 rpm - Power, 100% / 40% duty cycle: 18 / 27 kW - Torque, 100% / 40% duty cycle: 202 / 303 Nm Tool Turret with Driven Tools - Tool holders with cylindrical shank to DIN 69880: 12 - VDI40 - Number of turret stations: 12 - Maximum tool length (including holder): 190 mm - Maximum speed: 6,000 rpm - Maximum torque: 37 Nm (10% duty cycle), 26 Nm (25% duty cycle), 14 Nm (100% duty cycle) Electrical Equipment - Operating voltage: 400 – 480 V - Connected load: 42 kW Dimensions Ksdpsxxkh Tsfx Ah Eedt - Overall dimensions: Length = 2,680 mm (3,820 mm with chip conveyor), Width = 2,040 mm, Height = 2,400 mm - Weight: 6,500 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: GE Fanuc Series 18i TB - High precision: Positioning accuracy in X and Z axes ±0.001 mm (Heidenhain linear scales) - Main spindle: High power and broad speed range - Automated loading/unloading: Integrated automation system for part feeding and removal - Driven tools: Capability for drilling and milling operations - Chip conveyor - Documentation: Electronic unavailable, partial hard copy/manual available Machine status: NOT WORKING - Hydraulic solenoid valves: 4 units - Coolant (emulsion) pump defective

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: 179057653, Technical characteristics: Work Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance from spindle nose to tailstock reference point: 639 mm - X1/X2 axes travel (working stroke): 335/289 mm / Rapid traverse in X: 30 m/min - Z1/Z2 axes travel: 560/494 mm / Rapid traverse in Z: 30 m/min - Fully enclosed with automatic door opening, supporting manual or automatic loading Main Spindle - Spindle according to DIN 55026: Size A6 - Max. speed: 4,500 rpm - Power at 100% / 40% duty cycle: 23 / 18 kW - Torque at 100% / 40% duty cycle: 146 / 115 Nm Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret Configuration X1/Z1: Toolholder with Powered Tools - Cylindrical shank holders per DIN 69880: 8 - VDI40 - Max. tool length: 130 mm - Number of positions: 1 x 8 - Max. speed: 4,500 rpm - Max. torque at 10% / 100% duty cycle: 27 Nm / 14 Nm Turret Configuration X2/Z2: Toolholder with Powered Tools - X-HOT unit for polygonal turning, max. eccentricity (stroke): 8 mm - X-HOT tool clamping system: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length = 3,000 mm (6,477 mm with chip conveyor), Width = 3,000 mm, Height = 3,650 mm Kdsdpfsxxinfex Ah Eet - Weight: 11,000 kg Main Features and Capabilities: - Vertical design for optimum chip removal, suitable for manual or automated loading/unloading - Siemens 840D control, NC1 and NC2 axes - High precision: Positioning accuracy in X, Z axes ±0.002 mm (Heidenhain linear scales) - Powerful main spindle with a wide speed range - Live tooling extends machining capabilities to drilling and milling - Tool life monitoring - Chip conveyor: Knoll - Coolant system filtration up to 40 bar: Knoll FKA/1400 - Workpiece presence detection with low pressure sensor - ROBOT AUTOMATION INFRASTRUCTURE INSTALLED - Fully enclosed work area; integrated lighting - Documentation: available both electronically and as hard copy Machine status: Not operational - Missing: valve for emulsion circuit and inductive sensors

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: MW127, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Max. speed: Left spindle 3000 rpm - Power at 100% duty cycle: Left spindle - 15 kW / Right spindle - 7.5 kW - Max. swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: - Spindle speed: 6000 rpm - Max. bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Holder with Driven Tools - Tool interface: Okuma interface - Number of tool stations: 12-position lower turret, all positions driven - Max. speed: 4500 rpm / Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V 3-phase, fused at 151A - Connected load: 22.5 kVA Machine Dimensions - Dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Kodsxxihfjpfx Ah Eedt Main Features and Capabilities - Horizontal design: optimized chip evacuation, parts catcher and custom-made parts conveyor - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measuring system (Q Setter) - Broken tool detection: Load force auto-learning analyzer controlled by OSP-P300L-R - Part detection at counter spindle: low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and in printed format Machine Status: Currently operating with main spindle only - sub spindle requires repair OPTIONAL: Bar feeder: TopAutomazione model Fu352 SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: MW149, Technical specifications: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left spindle 3000 rpm - Continuous power (100% duty cycle): Left spindle – 15 kW / Right spindle – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle (Counter Spindle) - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower turret, all driven stations - Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical System - Operating voltage: 400V 3-phase, fuse protection 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design for optimal chip evacuation - Parts catcher and custom-made parts conveyor strip - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load force auto learning analyzer, controlled by OSP-P300L-R - Part detection at sub spindle with low-pressure compressed air gauges - Spindle cooling system - Documentation: available electronically and as manual Option: Bar feeder: TopAutomazione FU352SX Kedpfx Ajxxiiieh Esdt - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Machine status: Machine operational only with main spindle – sub spindle requires repair.

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: MW137, Technical characteristics: Work Area - Maximum turning diameter: 300 mm Ksdpfx Ahsxxh Udj Ejdt - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of positions: 12 lower turret stations, all driven - Maximum speed: 4,500 rpm; Milling spindle power: 4.5 kW Electrical Equipment - Operating voltage: 400V (3-phase), fuse protection: 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm; Weight: 5,500 kg Main Features and Capabilities: - Horizontal design: Optimal chip evacuation, parts catcher + custom-made conveyor belt - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Swarf (chip) extraction conveyor - Fire suppression system - Tool measuring system (Q SETTER) - Broken tool detection: Load monitoring with auto-learning analyzer via OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Electronic and print manual available Optional: - Bar feeder: FMB Model: Turbo 10-72XT/3200/A - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm; Weight: 1,500 kg Machine status: NOT OPERATIONAL - X-axis encoder: faulty

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: B-8044, Technical characteristics: # Machining workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (maximum load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / Width of T-slots: 18 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 4th axis # Rapid traverse: X, Y, Z - 30 m/min # Travel: Longitudinal (X-axis): 600 mm, Cross (Y-axis): 400 mm, Vertical (Z-axis): 510 mm Ksdpsxw Tqzofx Ah Eedt Headstock specifications: # Maximum distance spindle to table: 650 mm # Spindle taper: ISO 7388 (with internal cooling), Tool holder: Size 40 # Spindle speed range (standard): 100/14,000 rpm, Max. torque: 63.7/89.4 Nm at 330 rpm Automatic tool changer: # Number of tools: 20 # Tool selection system: sequential/random # Max. tool diameter (adjacent): 85 mm, Max. tool diameter (non-adjacent): 135 mm # Max. tool length: 300 mm # Max. tool weight: 6.5 kg # Tool change time: 6 seconds (standard), 3 seconds (fast) Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Dimensions: # Floor space required: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment included: # CNC Control: GE Fanuc Series 31i MODEL A # Chip conveyor # Lubrication system # Emulsion paper filtration system: Filber S.L. Model FTH5/10 – 200 l/min # Electrical cabinet cooling system # Spindle cooling system: HARBOR Model HBO-750PTSB2 # Documentation: Electronic and hard copy available Machine status: IN OPERATION

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 107786, Technical characteristics: Work Area - Maximum clamping plate diameter: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse in Z: 30 m/min - Standard closed automation (number of loading stations per workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Kdjdpjxw Slkofx Ah Eet Main Spindle - Spindle as per DIN 55026: Size A5 - Max. speed: 6000 rpm - Power at 100 / 40% duty cycle: 18.1 / 13.9 kW - Torque at 100 / 40% duty cycle: 77 / 59 Nm Tool Turret with Driven Tools - Toolholders per DIN 69880: 12 × BMT65 - Number of stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 27 Nm; 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V, 80 A - Connected load: 27 kVA Dimensions - Overall dimensions: Length = 4350 mm (with chip conveyor), Width = 1600 mm, Height = 2500 mm - Weight: 5500 kg Main Features and Capabilities: - Vertical construction: optimal chip evacuation and easy part loading/unloading - Control: GE Fanuc FS 32i B - High precision: positioning accuracy in X and Z axes ±0.001 mm (Heidenhain linear scales) - Main spindle: high power and wide speed range - In-process control: Marposs T25 measurement probe - Automated loading/unloading: integrated automation feeds and removes workpieces - Driven tools: enhances machining capabilities for drilling and milling - Tool life monitoring with sister tool management - Chip conveyor - Fully enclosed work area; workspace lighting - Documentation: Electronic available; physical manual incomplete Machine Condition: NOT WORKING - Operator panel touchscreen needs replacement - Hydraulic cylinder for loading door broken - Emulsion pump - Hydraulic pump - Spindle clamp/unclamp sensor - Hydraulic accumulator - Turret motor

Condition: repair required (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 68178, Technical characteristics: Work Area - Maximum diameter of clamping plate: 260 mm - Maximum turning diameter: 250 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 200 mm - X-axis travel: 626 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 250 mm / Rapid traverse in Z: 30 m/min - Standard closed workpiece automation via gantry loader and individual nest conveyor system Main Spindle - Spindle interface according to DIN 55026: Size 6 - Maximum speed: 5,500 rpm - Continuous power (100% duty cycle): 38 kW - Continuous torque (100% duty cycle): 300 Nm Tool Turret with Driven Tools - Tool interface: VDI40 DIN 5480 - Number of positions: 12-station disc turret, all positions driven - Maximum speed: 6,000 rpm - Torque capacity per driven station: 70–100 Nm Electrical Equipment - Operating voltage: 2x400 V, 160A GL fuse - Connected load: 90 kW Dimensions - Total dimensions: Length = 3,390 mm; Width = 2,850 mm; Height = 2,400 mm - Weight: 16,000 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy workpiece loading/unloading - CNC control: Siemens 840D SL - High precision: Positioning accuracy in X and Z axes by Heidenhain linear scales - Main spindle (Weiss): High power and wide speed range - Automated loading/unloading: Parts are loaded and unloaded via integrated automation - Live tooling via Sauter turret: Extends machining capability to include drilling and milling - Cooling and paper filter unit: DGS System GMBH, 950L - Chip conveyor: DGS System GMBH - Hydraulic power unit: Rexroth, flow Q = 13 l/min, max. pressure = 65 bar - Mist extraction units: IFS model IFM1000 - Documentation available: Yes Machine Condition: NOT WORKING - Loading/unloading sliding doors defective - Linear scale X axis (2 units) Kdedpfx Asxwk Iwoh Est - Turret position sensor (furT30) - Spindle clamp/unclamp sensor - Emulsion solenoid valves (4 units)

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: 840 DSL - Celos, _____ Description: Year of manuf. : 2022 Control : Siemens 840 DSL - Celos Speed : 20000 rpm Movement X/Y/Z : 2600/1100/900 mm Tool holder : SK 40 In General: Year of manufacture:2022 Control system:Siemens 840 Dsl - Celos Travel ranges X/Y/Z:2,600/1,100/900 mm Spindle speed:20,000 rpm Tool holder:SK 40 Spindle: Technology:Direct drive spindle Speed:20,000 rpm Max. power:35 kW Max. torque:120 Nm Tool holder:SK 40 NC swivel head: Technology:Swivel axis (B-axis) Travel range:+/- 100° Work table: Technology:Fixed table with integrated NC rotary table Total clamping area:3,200 x 1,100 mm Kjdpfx Ahozbgcgs Eodt Total table load capacity:4,000 kg/m Clamping area of NC rotary table:1,050 mm Max. table load capacity of NC rotary table:1,200 kg/m C-axis:360° Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper with ATC shuttle Max. tool diameter:130 mm Max. tool length:300 mm Equipment: Position measurement systems:Direct on all axes (glass scales) Chip removal:Chip conveyor Coolant supply:CTS system, 80 bar Tool measurement:BLUM laser Workpiece measurement:Heidenhain TS 460 Kinematics measurement:3D quickSET ready Emulsion mist separators:2 units, mechanical Process monitoring:Operating mode 4 Set-up mode:Electronic handwheel