Used Dowel for sale (357)

Year of construction: 1993, condition: good (used), I sell the angular drilling machine with hinges inserting suitable for doors production MARZANI MACCHINE CHEAP WORK Year: 1993 Number of drilling spindles 1 (drilling head tiltable fully -7 up to +90°) Number of inserting heads 1 (magazine suitable for door hinges) Inserting mechanically, screw system. Very good condition. Available immediately Dlsdpfjhw Dfvjx Ab Tea

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment. Especially designed for staircase construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drilling are easily achievable thanks to the swivelling drilling unit. - Motor with pole changing, two speeds - Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm - Motor start via convenient handle switch - Equipped with Röhm two-jaw chuck 1–20 mm - Linear laser for precise workpiece positioning - Drilling unit can swivel 65° left and right - Pneumatic adjustment of machining height; dowelling possible on two levels without resetting - Desired drilling heights can be set for each level via a digital counter; switching is then pneumatic from the front - Cross movement 340 mm, stepless or in 12 mm increments with indexing rail - Pneumatic clamping possible at any position, controllable from the front - Maximum height adjustment approx. 100 mm above table height - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps, 1 clamp column repositionable to the front - 2 swivelling workpiece supports - Suction funnel - Center stop + 1 side stop - Fixed mitre stop - Length stop as round bar - Set of drill bits - Operating manual - CE mark - Machine was partially repainted due to existing paint splashes - Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. Dsdpfxexmatne Ab Tsla The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse – see "other offers from this provider."

Condition: new, Year of construction: 2024, TECHNICAL DATA -drilling depth max. 145 mm Dlodpfxefpa Rae Ab Tja -drilling length max. 240 mm -height adjustment 135 mm -suction port ø 100 mm -speed 1500 / 3000 rpm -ColorRAL 7035 light grayRAL 5000 violet blue -net weight approx. 200 kg Solid German machine construction Professional slot milling and precise dowel drilling Fixed table, smooth running mobile drilling motor Travelling device for more mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limitation adjustable via side stops on left and right side Drilling motor power 1.3 kW/1.8 HP or 1.7 kW/2.3 HP, pole-changing, speed 1500/3000 rpm with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Dowel drilling device for hole line drilling with grid roller 16, 22, 25 and 32 mm high-precision milled grid, fixation via spring-loaded grid pin frame stop pluggable with index bolts for the positions: center, left, right Miter fence pluggable with index bolts for 45° and 22,5°workpiece fence up to 1500 mm for series machining CE-conform GS tested

Condition: used, Year of construction: 1999, functionality: fully functional, overall weight: 600 kg, number of spindles: 21, SCM MB 63 multi-spindle drill, 21 spindles, 1.5 kW power, fully functional Dledpfexqx U Eox Ab Tsa

Condition: good (used), Code: 0149 Brand: STEMA - 2BR Model: INSERMATIC CB/JUNIOR 86 Manual drilling and inserting machine for hinges or plates for kitchen, bathroom, custom furniture, panels and various Upright frame with table 1 mt Electropneumatic drilling unit with Hp 2 motor 3000 rpm Djdpfx Abewuy Drj Tjla Drilling head with 3 spindles for hinges Hinge housing pad N° 3 stops placed on table Dust collector complete with bags Foot pedal for start Voltage 400 V - 50 Hz Overall dimensions mm 1000 x 1100 x 1750 h Weight kg 130

Year of construction: 1989, condition: excellent (used), machine/vehicle number: RES-RIO, Technical data: 1x Demag KBK 2 column-mounted slewing jib crane NL 500KG with Demag PK2 chain hoist (Fig. shows DK chain hoist) 5 identical cranes are available !!! Payload at full radius 500KG / 0,5to payload Height: approx. 3.55m Lower boom: approx. 3.05m Outreach: 3m Hook height: approx. 2.55m Weight complete approx. 550KG Dowel plate 40x40cm with 500KG Demag PK2 chain hoist incl. bolts, cable drag, trolley, end cap etc. Swivel range 300°, connection to 400V 16A Dledpou Rn I Nefx Ab Tea Crane is disassembled and immediately available Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Year of construction: 1997, condition: good (used), I sell the multiple drilling machine with inserting KOCH WinDoor Year: 1997 Number of drilling spindles 1 (suitable for dowels 8x60mm) Number of inserting heads 1 Dljdpfx Ajfyn Tyjb Tja Motorical axes adjustment Workpc. length 200-3500mm Workpc. width 20-200mm Workpc. height 30-100mm Available immediately

Condition: used, Year of construction: 2009, max. workpiece length 4500 mm profile spindle 1 Stück main drive 20 kW Control Siemens Weinig Conturex 2 C 114 Dledpfowunwyjx Ab Toa ----- Working width: 40-260 mm Working height: 25-110 mm 2 x PowerGrip clamp tables, 2 x 2280 mm ----- Workpiece length 200 - 4,500 mm Workpieces over 2,700 mm in length are machined using a repositioning cycle. Main spindle 1: ----- Motor with brake 20 kW HSK 63F Electronically adjustable speed 2,000-18,000 rpm Maximum tool length from flat surface HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of pockets: 30 mm Pitch between pockets: 100 mm Permanently installed multi-spindle drilling head ----- For horizontal and vertical drilling and milling work without tool changes ----- Price ex-site Prices for disassembly and loading onto customer trucks Transport within Germany and abroad as well as reassembly Commissioning and, if required, new profiles are available upon request! Used tools included (drawings available upon request): ----- Wood: IV 68, 78, 88, opening inside and out, with hinged weatherboard Wood-aluminum: IV 68/68, 78/78, 87/68, 97/78 Lift-and-slide doors IV 68 and 78 Front doors IV 68 and 78 Pivot windows Corner connection: counter/dowel Technical specifications according to the manufacturer - no guarantee! Detailed technical description available upon request!

Condition: new, Year of construction: 2024, functionality: fully functional, VD 20 R Slot drilling machine with rotating table, 2.2 kW Basic equipment: 1.1 Work table mm 800x400 1.2 Motor kW 1.5 1.3 Spindle speed rpm 2880 1.4 Max. Slot height above the table mm 160 1.5 Max. Longitudinal travel mm 345 1.6 Max. Transverse travel mm 245 1.7 Spindle stroke mm 160 1.8 Clamping diameter of the tool mm 0-20 1.9 Max. Tool length mm 175 1.10 Clamping eccentric piece 1 1.11 Longitudinal tilting table inclination ° 1.12 Spindle rotation ° 1.13 Rotation of the table ° +/- 45° 1.14 Machine dimensions mm 1500x1100x950 1.15 Machine weight kg 345 Additional equipment installed on this machine: - Suction nozzle - 2nd clamping eccentric - Mechanical dowel drilling device - 2 speed motor 1.5/1.9kW 1440/2880 rpm - Mechanical numerical dimension of the spindle height Dledpou Rnw Dsfx Ab Tea

Condition: excellent (used), total width: 500 mm, total height: 280 mm, conveying length: 3,000 mm, working height: 280 mm, Roller Conveyors for the Furniture Industry WTT Conveyor Technology Type 121 Total of 750 pcs. complete roller conveyors, each 3 m (Total – 2250 linear meters) Price for: 1 pc. = 80 EUR 5 pcs. = 300 EUR (total length 15 m) 10 pcs. = 500 EUR (total length 30 m) For larger quantities, price on request. Detailed description: Roller conveyor length L = 3000 mm Dljdpfxswwmkds Ab Tja Installation length EL = 500 mm Roller pitch T = 200 mm Roller conveyor height H = 280 mm, adjustable +/- 25 mm Number of supports FA = 1 pc. per running meter Consists of: 1. Side rails, each 3000 mm long, made of 20/80/40/3 mm profile, with 25 mm hole pattern, perforated to fit shaft diameter 12 mm, powder-coated in RAL 6011 green. 2. Insertable load-bearing rollers Series 4.5.80.1.12.1.5.00 Steel tube – 80 x 2.0 mm wall thickness, Axle – 12 mm spring axle, Bearing – steel insert with reinforced, pressed special ball bearings. Surface of carrying rollers untreated steel. Installation length EL = 500 mm 3. Bolt-on bridge support feet in robust welded construction made of special profile with cross beam, height adjustable +/- 25 mm via M16 threaded spindle with screwdriver slot. With base plates for floor mounting and dowel hole. Powder-coated in RAL 3000 red Weight – 2.5 kg. (Technical data subject to change and errors excepted. Intermediate sale reserved.)

Condition: good (used), Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear Dsdpfx Ajb A R Iisb Tsla -Number: max. 2x drills -Recording: M8 -right/left: rotating alternately -Drill distance: 32 mm -Quantity: 1 piece available -Dimensions: 90/60/H130 mm -Weight: 2 kg

Year of construction: 1979, condition: excellent (used), machine/vehicle number: Kran, 25 Abus pillar jib cranes 250 500 1000KG payload available, length 4m Please inquire with exact dimensions such as overhangs, overall height, payload etc It is offered: 1x ABUS VS pillar jib crane jib crane chain hoist crane slewing crane 500KG 0.5t 6m PB7 (Picture 1-6) Technical specifications: 1 ABUS VS pillar jib crane 500 KG payload / lifting load Payload with full reach 500 KG / 0.5to Height: approx 3.9m Outreach: approx. 4 m, hook height: approx. 3 m dowel plate 140x140cm (approx 950KG) Weight completely approx. 1750 kg with Demag chain hoist Connection to 400V 360 ° swivel range The item location is 75053 Gondelsheim Only the offered crane system shown in the pictures is sold Dlodjfi U E Depfx Ab Tja See pictures Shipping by carrier or pickup Feedback geben Verlauf Gespeichert Community

Condition: good (used), Year of construction: 1994, I sell the automatic CNC working centre for BLOCK-HOUSE production Krüsi CM-40. Year 1994. Incutting saw Tenoning head Top + Bottom Tenoning head Left + Right Dowel drilling unit 4-head milling unit Automatic feeding system +-1mm Entry length 12m Dledpfx Absr Atcye Tea Suitable for wooden house constructions! Available immediately.

Condition: new, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L ----- With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article x slanted window control for vertical cylinder Dsdpowg Hr Tefx Ab Tela Article x pendulum pressure plates attachable for pressing up to 60 degrees Article Double pendulum pressure plate for pointed window (triangle) Article x extension for p...

Condition: new, Year of construction: 2025, functionality: fully functional, Gannomat Concept 70 Eco body press Year of manufacture 2025 including the following options: Dodpfx Abovxgrre Tjla - Rapid traverse speed adjustment speed up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel connections when pressing bodies together, as well as when making drawers. Brief introduction: • With tried and tested tolerance compensation (GANNOMAT system) • 2 potentiometers for continuously adjustable pressing force • Pressing force min. 300/500 daN (kg) for Concept Eco or Pressing force min. 600/800 daN (kg) for Concept Primus • Pressing force max. 2200 daN (kg) for Concept Eco or Pressing force max. 3500 daN (kg) for Concept Primus • 3 pressing and adjustment speeds 5/10/25 mm/sec. (with fine positioning / creep speed) • Freely adjustable pressing time pre-selection with automatic opening • Concept Eco: Simple operation via 6 separate push buttons for 8 movement sequences • Concept Primus: Simple operation via LCD display Universal application area: • Bodies e.g. for furniture and cabinets • Mitered bodies • Bodies with protruding lids • Drawers • Pressing several bodies / drawers Advantages: • Tried and tested tolerance compensation (GANNOMAT system) • Electromechanical body press with frequency-controlled gear motors • Independent vertical and horizontal press beam • Long service life thanks to tried and tested, high-quality components • Solid and robust construction • Space-saving design • Body pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple thanks to simple and practical control panel • Fast thanks to press beam positioning speed of up to 50 mm/sec (option) • Efficient thanks to precise pressing of a wide variety of body sizes • Flexible thanks to adjustable parameters such as e.g. Pressing force, pressing time, travel speeds • Precise through precise angle pressing of furniture bodies and drawers • Professional production of bodies and drawers using modern body presses

Condition: new, functionality: fully functional, machine/vehicle number: ST2100-001, overall weight: 450 kg, Year of construction: 2021, STEMA GLF Dowel Shooter Automatic Certainly the most productive dowel inserting machine for heavy and long dowels. Pre-installed for dowels, 80 x 8 mm, as commonly used in window manufacturing. Please refer to the detailed description in the attached PDF. The machine is available for demonstration in our showroom and ready for operation. Dsdpfjxhv A Iox Ab Tola

Condition: good (used), CNC-drilling and dowel insertion machine HOMAG WEEKE MOD ABD050 OPTIMAT for horizontal drilling/drilling and doweling. The machine can be used as a stand-alone machine or in connection with CNC-machining center. Realization: Dsdpfxsrlngke Ab Tjla - ABD 050/12 Technical data - workpiece length - ABD 050/12: 20 - 1,250 mm - workpiece width: 50 - 800 mm - workpiece thickness: 10 - 60 mm Equipment features - high-speed dowel and spindle drilling aggregate - vibrating conveyor for automatic dowel loading of standard dowels (8 x 30/35 mm) - lateral anchoring and central stop pneumatically lowerable - manually adjustable tensioning cylinder in length and thickness for workpiece clamping - ABD 050/12: 4 tensioning cylinder - glue - low pressure pump - space occupation for up to 4 workpieces

Condition: good (used), Year of construction: 1997, functionality: fully functional, Slot and dowel boring machine Dljdpexf Udfefx Ab Tsa Pneumatic drilling motor, height adjustable The machine is ready for immediate use!

Year of construction: 2011, condition: as good as new (ex-display), I sell the automatic CNC working centre for BLOCK-HOUSE production Stromab Autoblox. Year 2011. New machine. Incutting saw 600mm / 7,5kW Dowel drilling unit up to dia.35mm x depth up to 320mm Tenoning head up to dia.230mm / 4kW Horizontal milling up to dia.230mm / 4kW Vertical milling up to dia.180mm / 4kW Automatic feeding system +-1mm Dedpogiwkuofx Ab Tsla Suitable for wooden house constructions! Available immediately.

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: O03009A) THROUGH-FEED MULTI-BORER “BIESSE” Techno Logic with CNC No. 2 through-feed motorised belts, feeding speed up to 75 m/min No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), No. 5 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) No. 5 top pressing devices No. 2 endless screws to evacuate the wastes. Numerical Control Type CNI O03009B) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno INFOR a C.N. Dsdpew Uhbkefx Ab Tola No. 2 through-feed motorised belts, feeding speed up to 75 m/min No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) No. 2 Top pressing devices No. 2 endless screws to evacuate the wastes.

Condition: like new (used), DESCRIPTION Drilling beam for Jonsdorf dowel drilling machine spindle number 27 pcs. Drill bit receptacles Ø10 mm Dedpfx Aeivau Aob Tsla grid 32 mm

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, HOLZ-HER Dowel Drilling & Inserting Machine POWER-PIN 7605 • Minimum workpiece length 60 mm, maximum unlimited – limited only when workpieces are positioned against the stop elements. • CAPMUS V7x POWER-PIN software • LED strip for easy orientation Dledexdlwgepfx Ab Toa • Dowel insertion unit DA102 for pre-glued dowels, as well as use with raw dowels in combination with white glue. The POWER-PIN dowel machine – suitable as a standard dowel inserting machine or the perfect addition to, for example, nesting or console machines. From carcase furniture to high-quality solid wood drawers with a minimum material thickness of 12 mm, the 7605 is the ideal machine for drilling and inserting wooden dowels. The continuous LED strip displays the machine status and indicates to the operator the correct insertion position for the workpiece. A barcode scanner can be used to scan, for example, DataMatrix codes containing the processing instructions for the workpiece. Drilling positions and depths are automatically adjusted and approached by the machine. Also visit our Classic Shop on our homepage.

Year of construction: 2010, condition: good (used), CNC BIESSE BREMA EKO 902 INSERTS FOR SALE Djdpfshknbrex Ab Tola TECHNICAL DETAILS: 3-AXIS C.N.C. MACHINING CENTRE (X-Y-Z) - Integral protection of the operating spindle and the working area on the machine. - Numerical control (control) with BIESSE Works software on Windows. - Vertical positioning of the panels, with N. 2 panel locking clamps. - Panel feed (in X-axis direction, on the lower support with rubber wheels), movement (in X-axis) of the panel/board clamps. DIMENSIONS OF THE PALLETS (WORKING DIMENSIONS): - Length Min mm 160 / Max mm 3200 - Width Min mm 35 / Max mm 900 - Wait Min mm 8 / Max mm 80 WORKING GROUPS: - No. 1 Spindle (electro-spindle) vertical ER32 (KW 4,5) with reversing (up to 18000 RPM). - No. 1 Circular saw (for grooves) diameter mm 120 (fixed X axis) - No. 13 Independent vertical spindles for drilling (6 in X-axis + 7 in Y-axis) - Nº 8 Independent horizontal spindles for drilling (3+3 on X axis and 1+1 on Y axis) - Nº 1 Hinge drilling head unit - Total installed power 20 KW AUTOMATIC DOWEL INSERTION GROUP ON BOTH SIDES WITH PRESSURE PUMP TO APPLY THE GLUE.

Condition: good (used), Year of construction: 1990, I sell the combined tenonging machine with drilling head BALESTRINI I2F Dljdpfx Aohw Dfnsb Toa 1 tilting table with pneumatic material pressure. Automatic cutting saw from bottom. Tenoning milling head able to do the finger-joint as well. Drilling head for dowel holes production 3 spindles. Revolving 360° enabling any position. Feeding automatic. Positioning on end-sensors. Available immediately.

Condition: excellent (used), Year of construction: 2001, I sell the CNC accessories inserting machine with glue spraying BIESSE COMIL INSIDER IT2G. Year 2001. 2 Stk. CNC drawers slidings inserting from top. 6 Stk. Glue spraying heads 1 Stk. Vibration accessories input device. Dlsdpfx Abet N N Aqo Tea Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.