Used Dowel for sale (361)

Condition: ready for operation (used), Technical characteristics Single column unloader with suction cups. It is suitable for unloading in machining lines requiring machines with reduced dimensions. BODY OF THE MACHINE The machine is composed of a vertical column, a horizontal bracket fixed to the carriage, a carriage fixed to the bracket and a suction cup holder frame unit. The carriage slides on linear guides equipped with ball bearings and is driven by a gear motor controlled by a frequency variator. SUCTION CUPS PANEL COLLECTION GROUP It consists of a suction cups row containing 10 suction cups with bellows to facilitate the separation of the panel. Suction cup diameter of 95 mm. The suction cups are operated by a vacuum pump with a flow rate of 22 m3/h. ELECTRICAL CABINET The machine is equipped with a separate electrical cabinet, managed by a PLC operating logic. PROTECTIONS FOR THE PREVENTION OF WORK ACCIDENTS The machine is protected on all the action perimeter of the suction cups group by protective panels. The battery insertion area is protected by a grid with button opening. DIMENSIONS OF THE WORKABLE PANELS : Length: 320 to 2700 mm Width : 250 to 700 mm Thickness : 12 to 50 mm Maximum weight : 50 kg Pneumatic brake idler roller LOAD TRANSFER IN SINGLE LONGITUDINAL ROW Transfer of introduction with inclined rollers to the left, covered in PVC. The rollers are driven by small belts activated by a gear motor under the control of a speed variator. The transfer is also equipped with a left hand guide adjustable by handwheel. Structure The structure is made of welded steel, reinforced to ensure maximum stability and precision during the operating phases. Work surface The worktop is made up of a transfer in four independent sections. The first section includes : An input transfer with flat belts driven by an asynchronous motor controlled by a frequency converter The second and third sections (drilling planes) each include: A belt transfer with: flat belts driven by asynchronous motor controlled by frequency converter A lateral reference guide, installed on the left side of the machine, with lateral stop function Pneumatic end stops for the positioning of right and left panels A lateral presser guide to guide and clamp panels of different widths against the lateral reference stop. The fourth section includes: a belt transfer for the evacuation of the panels with : flat belts driven by asynchronous motor controlled by frequency checker. Machining center The first center consists of a mobile carriage along the X axis on which two independent drilling heads are installed along the Y and Z axes. Each drilling head is composed as follows: In the X direction, 10 independent vertical chucks In the direction of the Y axis, 9 independent vertical mandrels The second center consists of a mobile carriage along the X axis on which two independent drilling heads are installed along the Y and Z axes. Pgedpfsk Rticex Ah Heg Each drilling head is composed as follows: In the X direction, 10 independent vertical chucks In the Y direction, 9 independent vertical spindles. Each operating head is suitable for the installation of an additional operating unit to be chosen as an option Axis movements Precision linear guides with circulating ball bearings and brushless motors for X,Y,Z axes. Rectified helical rack coupled to two pinions to allow the recovery of the play along the X axis. Hardened and ground ball screw (Y,Z axis). Pneumatic balancing device (Z axis) of the drilling unit. Numerical control XNC model bas

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, Schleicher 3 unit drilling machine after lignum renovation. Pedpfot Ndznox Ah Hjgg Machine equipped with upper units 3 pieces .Pneumatic pressure .Working realized by forcing the button unit the rest of the automatic .Choice of units possible each one or all .Speed and depth of drilling the possibility of setting .Machine after major repair .New electricity and driver .Net price vat invoice warranty one year .The machine can be additionally equipped with rulers bumpers pressures and drilling heads of any spacing .

Condition: used, Year of construction: 1979, from school operationused, good conditionmake Ayentype DB 1000 K 23year of construction 1979machine no. 7SA740GS-testednumber of spindles 23 piecesnumber of drilling beams 1spindle distance / grid 32 mmdrilling from aboveswiveling pneumatichole line drilling devicestorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Psdpfevxr Raex Ah Hjgg

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 508678, drilling depth: 80 mm, total width: 820 mm, total length: 1,350 mm, total height: 1,400 mm, overall weight: 450 kg, number of spindles: 21, power: 2.2 kW (2.99 HP), Universal dowel hole and line boring machine, dowel hole drilling machine, dowel drilling machine Manufacturer: Scheer Year of manufacture: 1989 Type: DB-5 Weight approx.: 450 kg Machine number: 508678 Dimensions: 1350 mm x 820 mm x H 1400 mm Drilling beam length: 640 mm Spindle distance min. 32 mm, max. 640 mm 21 spindles Drilling depth: 80 mm Drilling beam pneumatically swivelling Pgedpfewuuxkox Ah Hsg Motor power: 2.2 kW

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 690924, Connected load 380V 1,84kW speed 2840 rpm number of spindles: 21 pieces, pitch 32 mm spindle distance 640 mm spindle rotation direction 11xright 10xleft M10 thread 2x safety clamps pneumatic foot valve table size 880 x 400 mm 1x side stop with 2 folding stops 1x basic fence 1x miter fence Unfortunately, we cannot answer inquiries without complete contact information. Pgsdpfxjh U Dame Ah Heg

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 Pjdoqpdkcopfx Ah Hegg - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour

Condition: reconditioned (used), Year of construction: 1990, Motors 2x1.85A 50Hz 380V 2800 rpm Air operating pressure 6 bar 30 spindles D=10 mm mount Combination foot switch Emergency stop switch Main switch Manual height adjustment Pgsdpfx Aov Nptmjh Hjg Manual side adjustment

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, product height (max.): 60 mm, product height (min.): 12 mm, product length (max.): 3,200 mm, product length (min.): 240 mm, product width (max.): 800 mm, product width (min.): 140 mm, TECHNICAL DETAILS Components: ESSE2 cross-loader: automatic BIESSE FTT: with 4 heads, drilling and milling, automatic tool change Tilter: available BIESSE FTT: with 2 heads, drilling and milling, automatic tool change BIESSE FHT: horizontal drilling and dowel insertion ESSE2 cross-unloader: automatic Panel dimensions Panel length: 240 - 3,200 mm Single panel width: 140 - 1,550 mm Panel width: 140 - 800 mm Panel thickness: 12 - 60 mm Drilling units FTT 1 drilling heads: 4 FTT 2 drilling heads: 2 Vertical spindles (X-direction): 14 independent per head Vertical spindles (Y-direction): 18 independent per head Horizontal spindles (X-direction): 3 independent, with double output Horizontal spindles (Y-direction): 3 independent, with double output Tool change system Turret cartridges: 2 Positions per cartridge: 56 Application: Automatic tool change of the vertical spindle centers on 4 drilling units of the two machining centers A and B Milling spindles Podpfx Ahewmcxie Hogg Electric spindle 1: 3.7 kW (5 HP), ISO 30, with inverter and 3-station tool change rack Electric spindle 2: 3.7 kW (5 HP), ISO 30, with inverter and 3-station tool change rack Lateral positioning units Workstations: 2 for parallel machining of identical or mirror-image panels Left positioning element: fixed to the lateral reference Right positioning element: movable in the X-direction, on lower supports, linearly guided Adjustment: automatic according to the X-dimension of the panel Drive: Brushless with digital control Function: Detection of the actual X-length in the machining center, automatic correction of the drilling positions Max. travel speed: 120 m/min Loading and unloading Infeed system: 1 belt conveyor with cross-feed, single drive Unloading system: 1 belt conveyor with cross-feed, single drive Additional features: Cleaning fan in the unloading area Safety features Standards: CE-compliant Safety equipment: Extensive protective enclosures

Condition: used, Year of construction: 1980, second hand Make Scheer Pgedevwfuvopfx Ah Hog Type DB 5 Year of construction 1980 Machine no. 508054 Number of spindles 21 pieces Number of drilling beams 1 drilling from below pivoted manually Working width 800 mm Drilling depth 80 mm Tensioner 2 pieces Pitch 32mm Space requirement approx. LxWxH mm 1200x800x1300 Weight approx. 300 kg Total connection value 2.2 kW Storage location 97447 Gerolzhofen Handover in the current condition as seen - free loaded -

Condition: used, usedmanufactured by Gannertype Superdrillnumber of spindles 19 piecespindle distance / grid 32 mmhydraulic feeder brakeguide fences 2 piece length ca. 3,0 m / 1,5 mworking width 640 mmdrilling depth 95 mm / 110 mmdrill chuck D 10 mmpendulum fence 6 piececlamp 3 piecedrilling unitframe dowel unitrequired space ca. 1400 mm x 900 mm x 1200 mmtotal connected power 1,5 kWlocated in 97447 Gerolzhofen, free on truck, unpackedsale in current condition as seen,without revisionwithout guarantee and warranty Pedpsvwf R Rsfx Ah Hogg

Condition: good (used), Year of construction: 1982, functionality: fully functional, Power 380V 3.3A Motor power 1.1kW 2800 rpm Automatic pneumatic control with control panel Drill head with 23 spindles, pitch 32 mm Drill hole depth adjustable drill shaft 10 mm position adjustment 5-60 mm Clamping height 80 mm Passage width 800 mm Dimensions: 1200 x 900 mm Weight approx. 400 kg 1x setting gauge row bore 1x setting gauge side stop 1x stop ruler 1500 mm Psdpfx Aoq Auwteh Hjgg 1x fence 2000 mm

Condition: like new (used), functionality: fully functional, Dowel Hole Drilling and Inserting Machine SCHEER BS 5102-V The BS 5102-V is a powerful, electronically controlled machine designed for precise and efficient face-end drilling and accurate insertion of wooden dowels. It is ideally suited for industrial wood processing—especially in furniture and carcass production. Condition & Service: Condition: As new (completely overhauled & newly painted) Functionality: Fully operational Warranty: 12 months CE compliant / Dust-tested Main Technical Data & Features: Workpiece width: min. 60 mm / max. 1200 mm (Pendulum operation: max. 600 mm) Workpiece thickness: 15 – 60 mm Drilling depth: max. 45 mm Vertical stroke of the support: 7.5 – 50 mm Min. lateral drilling distance: 10 mm Drilling unit: 9,000 – 18,000 rpm (adjustable), 1.5 kW Drilling system: M10 external (Scheer system) Servo motor: 0.54 kW, max. 60 m/min feed rate Dowel size: 8 x 30 / 8 x 50 mm, DIN 68150 Form A Glue system: 1:1 diaphragm pump, max. 7 bar Glue container: spiral conveyor, 3.5 liter capacity Extraction connection: Ø 80 mm | Extraction airflow: 540 m³/h at 30 m/s Clamping cylinders: 4 short-stroke cylinders (Ø 63 mm), angular clamping Pgedpeunvg Tofx Ah Hsg Power supply: 400 V, 50 Hz Machine Construction & Operator Comfort: Controlled X-axis with machine frame as workpiece support X-support with linear guide and rack-and-pinion drive Servo drive for feed system Clamping portal with 4 adjustable clamping cylinders—controllable in 2 groups Stop rulers: left, right, and center on the table Drilling depth and dowel projection are adjustable directly on the support Offcut Unit & Safety Systems: Safety hood locking Lamella safety curtain Integrated extraction channels Control & Operation: PC with Siemens PLC controller User interface: WP-Studio—dialog-oriented programming Operating system: Windows 10 Display: 17" color monitor Separate workpiece programs for left & right operating sides (mirrored possible) Glue quantity can be individually defined per program Network capable (LAN/WLAN), compatible with Windows, Linux, Mac, Novell Remote maintenance & software updates possible Optional Equipment: Y-axis: automatic adjustment of drilling and glue units Electronic glue monitoring: ensures controlled glue flow Additional drilling unit for surface-side drilling: • Drilling motor: 1.5 kW at 18,000 rpm • Drill feed: pneumatic • Drill stroke: max. 25 mm • Depth limit: via spindle & SIKO display • Drill distance from reference edge: 5 – 35 mm • Holder: M10 external, max. Ø 35 mm • Workpiece length: min. 70 / 90 mm Warranty & Reliability: We are convinced of the stability and manufacturing quality of our machines—that’s why you receive a 7-year warranty on the machine construction, especially on the supporting structure and guide mechanism. Excluded are electrical supply components as well as normal wear parts. Additionally, we provide a 1-year warranty on the complete machine (including control, hydraulics, pneumatics, etc.). Conclusion: This machine combines state-of-the-art control technology, high manufacturing quality, and user-friendly operation. Ideal for precise dowel hole drilling and automated dowel insertion—reliable and efficient for continuous operation. 📞 Contact us for an individual offer or to schedule a demonstration. Available from stock. Delivery, commissioning, and training available as options.

Condition: new, Year of construction: 2025, Advantages of Pre-glued Dowels • No additional glue required when inserting dowels • No cleaning required for the water supply system Advantages of the DübelJet • Recoil-free gun • Simple handling • Mobile handheld device • Universal application range Technical Data of the DübelJet Dowel system and water supply system designed for pre-glued dowels • Dowel diameter: 8 mm • Dowel length: 35 mm (default setting, adjustable from 30 to 40 mm) • Dowel projection: 12 mm (default setting, adjustable from 7 to 20 mm) Universal application Psdpfxjwu Dnno Ah Hegg • Insertion of pre-glued dowels (with water), especially in furniture manufacturing • Insertion of positioning dowels (without water) made of wood or plastic, e.g., in frame construction or in combination with screws or cabinet connectors

Condition: used, Year of construction: 1989, with many drills used, top condition Make Hoffmann Type DB 23 Year of manufacture 1989 Machine no. 169 Pgsdjvyurcspfx Ah Hjg Number of spindles 23 Number of drilling beams 1 Spindle spacing / grid 32 mm Drilling from below stroke 60 mm Stop rulers with central adjustment Working width 704 mm (1080 - portal passage) Drilling depth 70 mm horizontal Drill holder M 10 / cone 30° Space required approx. 1300 mm x 1000 mm x 1300 mm Weight approx. 500 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee and warranty

Condition: used, Year of construction: 1977, used manufactured by Ayen type DB 1000 K2 built in 1977 Mach.-No. 751212 number of spindles 23 piece Pedpfx Aevwgagoh Hegg number of drilling beams 1 drilling from top tiltable pneumatic comb lowering pneumatic drill chuck D 10 mm clamp 3 piece grid 32 mm required space ca. l x w x h mm 1200 x 800 x 1600 weight ca. 370 kg total connected power 2,2  kW located in  97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: used, Year of construction: 1983, with 2 drilling beamused, good conditionmanufactured by Scheertype DB 3built in 1983Masch.-No. 83120number of spindles 25 piecenumber of drilling beams 2Spindelabstand / grid 32 mmdrilling from tophydraulic feeder brake 2 pieceguide fence 1 piece ca. 2500 mmworking width ca. 800 mm (768mm)drilling depth ca. 100 strokedrill chuck M 10pendulum fence 3 piececlamp 3 piecedrilling programs 4 piecerequired space ca. 1400 mm x 1300 mm x 1800 mmweight ca. 1000 kglocated in 97447 Gerolzhofen, free on truck, unverpacktsale in current condition as seen,without revision,without guarantee and Gewährleistung Podpfxjvwf N Hs Ah Hsgg

Condition: refurbished (used), Year of construction: 1996, operating hours: 350 h, functionality: fully functional, Universal Dowel Hole Boring Machine DB 4 This used SCHEER Universal Dowel Hole Boring Machine DB 4 has been functionally tested (not newly painted). Worn parts/seals have been replaced, and the machine geometry was reset to ensure the highest precision. The SCHEER Universal Dowel Hole Boring Machine DB 4 is specifically designed for construction drilling, for series drilling in the 32 mm grid system, and for drilling fittings of various kinds; it enables all these tasks to be performed quickly, precisely, and with minimal setup times. Easiest operation via symbols and 4 program preselection controls for switching to new working processes in seconds. Central adjustment of the removable side stops always ensures flush alignment at the front edge for precise drilling of left and right workpieces. It does not matter whether the parts are cut to size or in square. The dowelled corner connection is always flush—both at the edge and at the CNC machines—just as simply and quickly as with a SCHEER DB 4. Safety clamping device across the entire table width, clamping of workpieces directly at the drilling bar. Stop rail with three adjustable flip-stops. Continuous table supports facilitate feeding and drilling of long workpieces; foldable workpiece support tables make series and fitting drilling easier. 2 drilling units Drilling motor Type BM 602-230/400 Volt, 50 Hz, n = 2860, 2.2 kW power 25-spindle attachment gearbox Pgjdpfxowq S E Hj Ah Hjg Spindle spacing 32 mm (other spindle spacings on request) For surface and face drilling. The vertical drilling unit is equipped with an oil brake for tear-free drilling of series holes. The control cabinet of the machine has been completely rebuilt and converted to the new SIEMENS LOGO control system. This ensures the operational safety of the machine for the future! Portal passage: max. 950 mm Working length: max. 2360 mm With pneumatic comb adjustment

Condition: used, mileage: 85,000 km, power: 85 kW (115.57 HP), first registration: 08/2014, fuel type: diesel, overall weight: 1,975 kg, next inspection (TÜV): 08/2027, color: white, gearing type: mechanical, emission class: euro5, number of seats: 5, total length: 4,709 mm, total width: 1,823 mm, total height: 1,600 mm, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, 1st owner. Emergency vehicle command car KdoW / operations command vehicle ELW ELF of a German aid organization. Pedjxfnbkspfx Ah Hogg Only 85,000 total kilometers driven. With service booklet. Last service at 81,477 km. MOT (TÜV) recently renewed, valid until 08/2027. Special signaling system: HELLA RTK 7 blue lightbar with control unit and 2 front flashers. Technically, essentially a standard passenger car estate with 5 seats. Registered (previously tax exempt) as a "passenger car estate with fixed blue revolving beacon and audible warning system installed." Unladen weight: 1,367 kg. Permissible gross vehicle weight: 1,975 kg. Economical 1.6 TDCI Duratorq diesel engine with 1,560 cc, 115 hp, Euro 5. 6-speed manual transmission. Air conditioning. Central locking (2 remote keys). 2 x airbags. Heated windshield and washer jets. Heated seats for driver and front passenger. Radio. Fitted with good winter tires (front from 2024, rear from 2020) with snowflake symbol according to latest regulations. A second set of wheels complete with rims is included (however, this extra set is no longer in good condition). We drove the vehicle 700 km on the motorway without any issues. The Ford runs very reliably and quietly. Minor signs of use present. Ideal vehicle for an aid organization seeking an affordable used emergency vehicle with relatively recent year of manufacture in good condition. This Ford Focus emergency vehicle is available from us immediately. This offer is valid only for commercial customers and authorities or BOS organizations. Subject to prior sale and errors. The purchase price does not include 19% VAT, nor can this be deducted. Taxed under the margin scheme according to §25a UStG, final gross = net price.

Condition: new, Year of construction: 2026, Precise and accurate multi boring machine for casegoods, furniture fittings, line drilling and framework in SYSTEM 32 mm. The DB is a semi automatic boring machine with 21, 27 or 35 precision drilling spindles. Short introduction: • Universal drilling machine for panel and solid wood construction • Holes in the SYSTEM 32 mm • Massive precision drilling unit from GANNOMAT • Easy settings via mechanical digital counters for side and front stops and for drilling height position • Tool-less quick-change system for stopping ruler Podpfx Ajdxz Nksh Hjgg • Dowel holes, row of holes as well as line drilling, all kind of furniture connectors, handle and through holes, hinges, 3- 5- 7-hole groups, boreholes for drawer slides and guides, holes for door frames and table legs, etc.

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 230 V Pluging: Singlephased Psdpfeuarx Isx Ah Hjgg Overall dimensions

Condition: used, Year of construction: 2006, functionality: fully functional, BARGSTEDT LOADER BARGSTEDT TURNER (front side/back side) WEEKE THROUGHFEED DRILLING PROFI LINE BHH 35 WEEKE THROUGHFEED DOWEL INSERT BST 100 Pgsdpswrdg Eefx Ah Hsg BARGSTEDT UNLOADER

Condition: new, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L ----- NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article Shut-off valve on the lower horizontal cylinder Article x slanted window control for ... Podpjwg Hr Tjfx Ah Hegg

Condition: new, Year of construction: 2025, heavy-duty construction with cast iron table smooth movements using hand lever and handwheel eccentric clamping device dowel drilling unit with 16-22-25-32 mm grid 2 spindle speeds: 1500/3000 rpm WESCOTT drill chuck 1 - 16 mm CE compliant Work table dimensions: 287 x 550 mm Longitudinal travel: 200 mm Vertical travel: 160 mm Cross travel: 125 mm Pgedjycg U Ejpfx Ah Heg Three-phase motor power: 1.8 kW, 400 V, 50 Hz

Condition: new, 5x10m storage platform, load: 500kg/sqm lower edge: 3m, approx. 50sqm, system platform Data : - Length : approx. 5m - Width : approx. 10m - Lower edge of platform : approx. 3.0 m - Top edge of stage : approx. 3.38 m - Total area : approx. 50 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 04 x C profile 5000 mm , sendzimir galvanized . - 14 x S profile 4800 mm , sendzimir galvanized . - 06 x Support 3000 mm , RAL 7016 . - 03 x dome strut 3049 mm , RAL7016 . - 24 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 06 x Lining plates for supports . - 06 x Set of dowels for supports . OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING QUOTATION TAILORED TO YOUR REQUIREMENTS. Price : 7.840 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Pgodpfxoydv I Ro Ah Hsg Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, 10x10m storage platform, load: 500kg/sqm lower edge: 2.5m, approx. 100sqm system platform Data : - Length : approx. 10m - Width : approx. 10m - Lower edge of platform : approx. 2.5 m - Top edge of stage : approx. 2.88 m - Total area : approx. 100 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 08 x C profile 5000 mm , sendzimir galvanized . - 28 x S profile 4800 mm , sendzimir galvanized . - 09 x support 2500 mm , RAL 7016 . - 03 x strut brace 2517 mm , RAL7016 . - 47 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 09 x Lining plates for supports . - 09 x Set of dowels for supports . OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING QUOTATION TAILORED TO YOUR REQUIREMENTS. Price : 12.904 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection Psdpoydv Iwofx Ah Hjgg - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.