Used Dovetail for sale (160)

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate Isdpfxetp Rfhs Affjik -Mounting plate: with dovetail guide -Clamping surface: 1955 x 1040 mm -Height: 110 mm -Dovetail: 27 to 45 mm / 35 mm high -Pin opening: 47 x 47 mm -Quantity: 2x mounting plates available Price: per piece -Transport dimensions: 1955/1040/H110 mm -Weight: 1288 kg

Condition: excellent (used), Steblo PTJ trapezoidal pneumatic press. Ijdpjx Ihursfx Affsik The press consists of two elements; it is possible to purchase a single section with a width of 3000mm. Height: 900mm Width: 6000mm Maximum thickness: 110mm 8 clamping cylinders 12 leveling clamps Weight: 1560kg Very good condition, ready for operation.

Condition: used, Dovetail milling motor Hoffmann type UAD 33-F. Isdpfx Aow Db H Teffjik power: 1.000 W n: 33,000 rpm

Condition: good (used), functionality: fully functional, Dovetail milling machine WL - MU 2 Isdoxykqdspfx Affjik

Condition: used, Counter bearing and adapter for milling machine for horizontal milling Counter bearing and adapter (counterholder) for DECKEL milling machine Iiedpfsxcbl Dox Affok (Bearing block with dovetail mounting adapter DECKEL FP1 + FP2) Type 9570 Dovetail width, narrow: approx. 72 mm Dovetail width, wide: approx. 88 mm Dovetail height: approx. 15 mm Length (bearing block): 133 mm Width (bearing block): 50 mm Total height (bearing block): 105 mm Bearing bore: Ø 17 mm (with bronze bearing bushing) Distance from bore axis to dovetail mounting face: approx. 82.5 mm (center height) - Adapter fits dovetail and mounting surface, raises center height by 22.5 mm to 105 mm Total length (dovetail rail): 635 mm Weight: 3.8 kg Very good condition

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2020x920x1160 mm Weight 750 kg Iedpfxjv A Hy De Affjik Total power requirement 3,2 kw

Condition: ready for operation (used), Technical characteristics Synchronized cutting and assembly milling 2 blades Ø 350 mm / 2 HOFFMANN cutters at 45° (cutter depth 70 mm max) Max. wood height 80 mm Max. wood width 90 mm Workpiece clamping cylinder Iisdjradt Iepfx Affjk Digital length stop Two-hand control Ideal for joinery, small woodwork, frames, moldings, fittings Power and Motors Pluging: Three-phased Overall dimensions Lenght: 1600 mm Height: 1470 mm Weight: 850 Kg

Condition: used, Year of construction: 1996, OMEC F8 Dovetail milling machine with multiple cutters. Built in 1996 From 1st owner Isdpswallfsfx Affeik

Condition: good (used), Year of construction: 2002, functionality: fully functional, Hoffmann dovetail router with dowel unit Condition: ready for immediate use Better photos will be available in the coming days! Iisdpfxexyih Ij Affsk

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2020x920x1160 mm Iiodpev A Hywjfx Affjk Weight 680 kg Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1700x750x1250 mm Weight 600 kg Iodpfx Asv A Hyqsffoik Total power requirement 3 kw

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, The most easy dovetail machine in the world – see the difference Iijdpfexc Ealsx Affek iDovetail designed to solve your staff training time and the correction time when changing the workpiece. Anyone can operate this machine. It is as easy as a mobile phone or a printer. We use the real-time model to replace the existing field input on the market, let you enter the size directly on the model, you can master your finished product 100% in the design stage Working width (mm) : 50-610 Working thickness(mm) : 5-50 Minimum length (mm) : 170 Total Power (kw) : 4.2 Spindle Power (kw) : 3 Spindle Speed (RPM) : 24000 Net Weight (kg) : 750 Shipping Weight (kg) : 800 Overall Size (W x H x L) (cm) : 121 x 120 x 109

Condition: like new (used), functionality: fully functional, AUTOMATIC DOVETAILING machine OMEC 750 I Iiodpfxegzrlpo Affok for dovetail joints on drawers and different parts of furniture second hand machine working condition : excellent dovetail jointing machine with tools: YES CE regulations: YES volt. 380/50

Condition: good (used), Code: 0125 Brand: OMEC - ITALY Model: F8 - CE Standard Automatic dovetailing machine for dovetail joints on drawers and various furniture elements - CE Standard The machine is equipped with a unit of 8 spindles with equal mill cutters that allow the production of indents of different heights. Technical data: No. 8 spindles Iiodpfxowl Iv Re Affsk Spindle revolutions /min 17,000 Maximum working width mm 400 Distance between centres of indents mm 25 Drawers production 120 / hour Power Kw 7,5 Working pressure 6 atm Overall dimensions: mm 1500 x 1000 x 1200 h Weight kg 1100

Condition: good (used), Code: 0106 Brand: OMEC - ITALY Model: 650-M Dovetailing machine Technical characteristics: Installed power on board machine Kw 0,75 Max working width mm 420 Center to center of indents mm 25-40-50-80 Iisdporc Dgmofx Affjk Overall dimensions: mm 800 x 720 x 1320 h Weight kg 130

Condition: new, The manual milling machine Omec 650-M is utilised to indent dovetails for drawers and various furniture elements. The machine is equipped with a mill spindle which allows cutting of indents of adjustable height. The machine can cut four types of indents with different pitches. Locking and unlocking of pieces takes place manually by means of eccentric ar- bores. The controls are realised with a magnetothermic switch that is directly installed on the terminal board of the motor, and lever hand wheels installed at the sides of the machine. The machine is designed and built according to EC Safety Standards installed power 0,75 kW, 400 V, 50 Hz no of spindles # 1 spindle revolutions 16.500 RPM machine weight 100 kg machine dimensions (l x w x h) 450 x 540 x 1420 mm Iisdpfxodcdwbo Affek work piece dimensions: work piece lenght 200 – 1500 mm work piece width 60 – 280 mm intent height 5 – 18 mm front thickness 7 – 45 mm side thickness 7- 30 mm The machine is supplied with the following components: - Eccentric HSS mill cutter assembled on the machine - Tool Kit for adjustments and maintenance - User's and instruction manual

Condition: good (used), Counter support, counter bearing, bearing block, pillow block bearing, bearing for milling machine Iisdpfx Afjb A Rfrefsk -Dovetail: 144 x 184 mm, 30 mm high -Drawing with the photos -Dimensions: 270/130/H195 mm -Weight: 12 kg

Condition: ready for operation (used), For sale: an indestructible Makita carpentry milling machine, Model 2516, with as-new cutters for dovetailing and rebating. Technical data: - 1430 watts - 110/230 V transformer voltage - 12,000 rpm Iedpfx Afod Tdx Dofeik The milling depth is 60 mm. Beams up to a width of 320 mm can be clamped. Naturally, a depth stop is included, which can be quickly and tool-free adjusted. The hand crank allows for fine adjustment of the position to be mortised. Because the milling machine clamps onto the beam, unlike certain machines from other well-known manufacturers, there is no risk of plunging in crooked or at an angle. With a hand lever, the mortiser can move along the beam, allowing for very precise positioning of the mortise. As seen in the pictures, the machine is in excellent condition, both technically and visually. The construction is robust and well-engineered. International shipping is possible.

Condition: used, Year of construction: 2000, used CONDOR AC, partially overhauled Centre height: 165 mm Between centres: 750 mm Spindle bore: 40 mm Spindle speeds: 22–2,800 rpm, infinitely variable - Quick-change tool post size B - WEILER DZ-V digital readout - Hollow spindle stop - Fixed steady rest - 7 Multifix tool holders - Flat splash guard - Electrically interlocked chuck guard - Change gears and various soft jaws The machine is partially overhauled: - Bed slide: guideways re-coated and hand-scraped, gibs and lower guide strips adjusted - Cross slide measured and aligned on bed slide; cross slide dovetail guide newly scraped, gibs adjusted and scraped - Top slide newly scraped and gib matched - All measuring scales overhauled and cables replaced Iisdpfx Afox E Um Nsfok The machine is located in our showroom at 71334 Waiblingen-Beinstein and is immediately available. For details on equipment, please contact us.

Condition: used, The KED Ehemann Type S10 box sander, also known as a drawer sander/drawer fitting machine, is designed for sanding entire (e.g., dovetailed) solid wood boxes or other cube-shaped workpieces. It can also be used as an edge sander and includes a set of sanding belts. Grinding surface: 750 x 230 mm workpiece width: approx. 100 - 950 mm Iijdpfx Afewtz Sbefek Sanding belt dimensions: 2,360 x 250 mm engine: 2 x 7.5 kW oscillation: Yes

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, Multi-spindle milling machine Fritz Werner SSF 3Article number: 07-99-001Manufacturer: Fritz WernerVery good overall conditionMachine workshop testedDelivery time: Immediate - sale subject to prior saleYear of construction: approx. 1980Dimensions (L x W x H): approx. 1900 x 1800 x 1800 mmWeight: approx. 1200 kgTravel ranges:X-axis: approx. 600 mmY-axis: approx. 200 mmZ-axis: approx. 500 mmTable clamping area: approx. 740 x 220 mmSpindle:Speed range: approx. 3000 rpmDrive power: approx. 7.5 kWFeeds & rapid movements: in all 3 axesMax. milling area (dovetail): approx. 400 mm widthSwivel range of 1st & 3rd milling spindle: approx. 50-80 degreesHeight adjustment 1st & 3rd milling spindle: approx. 80 mmHeight adjustment 2nd milling spindle: approx. 50 mmAccessories:Left/right operationMechanical vice10 pieces of various milling head attachmentsWork lightFurther accessories available upon requestPrice and further technical details available upon request. Isdpewl Aqvefx Affsik

Year of construction: 2005, condition: ready for operation (used), Additional Equipment Infeed length: 8270 mm / Max. timber length, infeed: 16000 mm / Max. timber length, outfeed: 12000 mm / Infeed cross conveyor, 5-strand, 2200 mm / Extendable timber support table / AQF strand with shaft extension, 2900 mm / Under-table pivoting crosscut saw /Straight safety guard flap / Waste disposal downwards / Control for waste disposal system / Universal milling unit, 5-axis with profile cutter / Dovetail cutter / Finger joint cutter / Combination support for vertically operating tools / Drilling unit, 3.0 kW / Finger cutter 1 / Combination support for horizontally operating tools / Slotting unit, 480 mm / Drilling unit 1, 2.2 kW / Drilling unit 2, 2.2 kW / Marking device, reference side / Marking device, operator side / Pneumatic beam turning station / 7-arm outfeed table/ Extension roller conveyor, 5300 mm Iijdjx D Ibhspfx Affok This HUNDEGGER K2-5-450 was manufactured in 2005. A robust timber framing machine, it excels in cutting, milling, drilling, and slotting for timber construction. Features include an 8.27m infeed length, extendable timber support, and multiple drilling units. Ideal for precise wooden component processing. Contact us for more information about this machine. Application Types Milling (Wood)

Condition: good (used), Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 -Motor: AEG 380V 8 kW 1400/2850 rpm Iisdpfx Afekvrptsfok -Dimensions: see photos / technical. drawing -Dimensions: 1700/580/H700 mm -Weight: approx. 525 kg

Condition: excellent (used), functionality: fully functional, CATALOG NUMBER 7559 TECHNICAL DATA - Loading fields: 2 - Manually adjustable side clamps: 2x4 pcs - Pneumatic vertical clamps: 2x4 pcs - Max length of glued elements: 3300 mm - Max height of glued elements: 1020 mm - Max thickness of glued elements: 100 mm - Dimensions L/W/H: 4270x1600x2000 mm - Weight approx.: 800 kg ADVANTAGES – Two working fields – Gluing length 3300 mm – Pneumatic cylinders Isdjv Dirxspfx Affoik – Used press, in very good condition Net price: 10,900 PLN Net price: 2,600 EUR (depending on exchange rate 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: new, Catalog number: H0531 – new machine, in stock – tiltable spindle – with side trolley – CE certificate Isdpfx Asvw Rtwoffjik – DTR documentation in Polish TECHNICAL DATA spindle diameter 30mm spindle stroke 100mm max spindle diameter 180mm spindle adjustable at an angle of -5+45 degrees table dimensions 1000x360mm sliding table 1000x250mm 4 types of speeds 1800, 3000, 6000, 9000 U/min engine power 2.8kW/3.9kW exhaust nozzle diameter 100mm dimensions length/width/height 1150/1155/730mm weight 270kg PRODUCT FEATURES Milling machine lower spindle - table FS 200SF is a massive construction with a table top made of grey cast iron with a high-quality gauge mounted to hold the processing element and high precision of adjustment. The price includes a milling machine with a sliding side carriage. FS 200SF with a tilting spindle is a device with a wide 4-step speed range: 1800/3000/6000/9000 It is successfully used for processing the edges of straight-line elements and for creating decorative strips, grooves, projections, tenons and dovetails The welded steel body and large cast iron table make it a very solid and stable machine, not susceptible to vibration A precise formatting table included Net price: PLN 14,100 Net price: EUR 3,350 Net price calculated according to the exchange rate of PLN 4.2 / EUR (in the event of greater exchange rate fluctuations, the price may change)