Used Ewd for sale (25)

Year of construction: 1994, condition: used, Edger line / automatic edger / double edger with measurement and automatic saw blade adjustment Lhsdsyam Iajpfx Ad Nob EWD Esterer Type: DK90 TL 1000 Year of manufacture: 1994 Maximum pass-through width: 1000 mm Maximum cutting height: 120 mm 3 blades in total 2 blades adjustable Measurement system: Combimes with S-conveyor with crosscut saw with Esterer ARS TR infeed with 2-lamella chip separator Can be fully refurbished upon customer request. The plant has already been dismantled and is immediately available. Location: Austria, near Leoben

Condition: excellent (used), Year of construction: 2020, Complete sawmill for pallet lumber consisting of: Lhjdpfxox T Azwj Ad Nsb 1. Log yard Häwa, with root reducer and Valon Kone debarker VK 90. Calibrated factory log input measurement system by Jörg. Sorting with 28 bins. Log length 2.0 - 5.0 m. Log diameter from 20 - 90 cm. 2. Sawmill: Möhringer band saw, running bandsaw with Flexi Drive carriage. Slab scanning unit. Round timber intake with step-by-step singulation. Laser measurement by Bidac. Kallfass cross-cut unit. Resaw: EWD Optimes with chipper canter and double arbor saw NKU. Brodbaek edger system. Stacking system for main products, empty pallet handling for both main and side products. Kuka robot for packing side products and main products, four dimensions possible. Complete mechanization, electric and electronic control cabinets, etc. Waste disposal. Detailed plans or video can be provided upon request.

Year of construction: 1993, condition: ready for operation (used), Edging line DK 90 TL Lodpfex Tp Tmox Ad Nehb In operation until 18.12.2025 Consisting of: Infeed roller conveyor DK90 (incl. various saw sleeves) Slab separator ASV Machine professionally dismantled and ready for loading

Condition: used, Year of construction: 2000, functionality: fully functional, Trimming line consisting of: centering table H42 (factory-overhauled EWD 2000), chipper canter FZ 3 (factory-overhauled EWD 2000), converted to servo cylinder; infeed BNK with square timber centering, BNK 200/6, year of manufacture 2000; board separator ASV, year of manufacture 2000; hydraulic unit; central lubrication. Without electrical control equipment. Dismantled, chipper canter and BNK stored in the hall. Lhsdpfx Ajx Tpzdod Njb

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, Wurster & Dietz high-performance frame saw with oscillating frame GUS 71. Completely overhauled in 2022 and not used since. Lhsdpfx Adsx Tgd Ne Nsb Frame opening: 710 x 710 mm. Stroke: 500 mm. Speed: 320 rpm. Hydraulic roller lifting with adjustable roller pressure. Hydraulic, stepless feed from 0 to 12 m/min. Automatic overhang adjustment of the saw frame. Oscillating frame design. Electromagnetic remote control. Drive via robust intermediate gearing with electric motor. Jansen hydraulic saw tensioner with side pressure register. Jansen saw blade mounting with insertion brackets. Electrical control cabinet. Fits WD base plates from GXW 71 and GXV 71 or GDZ 71.

Condition: refurbished (used), functionality: fully functional, Hydraulic quick-clamping wagon H 32 III with electric auxiliary wagon H 25 V. Completely overhauled in 2022 and has not been in use since. Track gauge 850 mm. Wagon height 420 mm. Very stable and fast clamping wagon. Lhedpfex Tf Uajx Ad Njb

Condition: good (used), Year of construction: 2018, functionality: fully functional, Spaner Circular Saw Line EWD - Springer - Nicholson.... For sale is a complete, well-maintained used sawmill plant with an EWD saw line, comprised of modern components for round timber processing, sorting, and waste handling. The plant has been regularly serviced and is in excellent condition. A part of the line is still in operation and can be viewed by appointment. Available from approximately June 2026. Overview of plant components: Log Yard: Sorting, measuring, and debarking system by SPRINGER, year 2017 Nicholson debarker, year 1992 Microtec measurement system, year 2015 30 sorting bins Crosscut system, year 2017 Lodpfx Aox Rvdyod Njhb Saw Line – EWD: Twin-shaft circular saw DWK 700, year 1999 Profiling chipper PF 19-3SP/V, year 2003 Secondary edger BNK 225/6, year 2003 Complete mechanization and control system Edger EWD Optimes BK-100B Lumber Sorting and Auxiliary Equipment: 7 sorting bins with package handling Complete chip and residual wood removal system Drying kilns and heating system This facility provides a fully integrated production line for efficient round timber breakdown and industrial-level lumber processing. Ideal for companies seeking a compact, high-performance, and immediately operational solution. Year of main components: 1992 – 2017 Condition: very good Availability: from June 2026 Inspection: possible during operation by appointment

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: EWD DWK T-4, EWD edger circular saw line EWD ZE Microtec 3D measurement EWD edger unit FZ5 Roller unit EWD EVW Flexible twin-shaft circular saw EWD DWK 700 T-4 4 flexible saw axes Cutting height 60–340 mm 2x200 kW Complete control system Lhjdpfx Aex Rn Udod Nsb Complete hydraulics/control cabinets

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Double edger and trim circular saw with electronic control, consisting of: RET alignment and infeed table. Chain bed in front of the machine with liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Passage width 1000 mm. Cutting height 125 mm. Feed speed frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment hydraulically, electronic positioning control with the following setting options: Lhedpfx Aown D Izod Nob Continuously variable, cm indexing, and switchable to 2 cm indexing. Cutting width between flanges 24 - 440 mm. 10 adjustable fixed dimensions, direct input in mm. Constant dimension allowance, shrinkage allowance (percentage). Splitter wedge pair: 1 x zero line, 1 x independently hydraulically adjustable with electronic positioning control. Splitter wedge opening 48 - 600 mm. Chain bed on the outfeed side. Motor 90 kW with power belt drive. Hydraulic unit. Chip separator ASV DK II with 2 separating lamellae. Electrical cabinet with power section and PLC control. Control panel. Lath clamping sleeve 403 mm clamping length. Adjustment and zero sleeve. Professionally dismantled and loaded onto truck, free of charge.

Condition: ready for operation (used), For sale is a complete log yard with long log feed, Nicholson A6/35'' debarker and Baljer Zembrod OBX V-24 bridge crane with up to 200 meters of rail. Ljdpewxndnofx Ad Nehb

Condition: good (used), Saw frame, guide rails, connecting rods, feed rollers, new roller shafts, racks, new rack heads, roller lifting hydraulic unit, gang saw frame stand with overhang plates, gang saw flywheel assembly, tight pulley and free-running pulley with bushing and many more parts Lodpfx Aowhv Rnod Njhb

Year of construction: 2012, condition: like new (used), EWD roller table with transverse haul-off length 6500mm Lhsdpoglugysfx Ad Njb Width over all 2000mm Roller shell length 1200mm

Condition: excellent (used), functionality: fully functional, 2 pieces of gate uprights, heavy-duty design, for Esterer Gatter HDE or SS 71, with cover. Lhodpfx Adexw Uf To Nob

Condition: excellent (used), functionality: fully functional, Complete saw frame for Esterer Gatter HDE or SS 71. Lhodpfx Aexw Ubnjd Njb

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 71 or SS 56 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Lhsdpfxew Eu Ake Ad Nsb 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm 1 set of lower guide shoes for bearing 6210 for SS 56

Year of construction: 1999, condition: ready for operation (used), Linck EWD pre-cutting group consisting of: - Linck EV 40 infeed table, with 1x pair of turning rollers - EWD FZ 3 (mounted on PF19 frame with guide shafts DM 200mm) 2x drive motors with 75/45kW. 1 pair of pull-out rollers - Centering unit EVW - FR 14 side cutting saw with limit cutter 4 x 50KW + 2x 75kW - Side fabric separating transport - incl. hydraulic unit - without switch cabinets Machine is in very good condition! Lhedpfx Adeufr Ndo Njb System can also be overhauled and offered with a new control system!

Condition: used, EWD EW1000 solid band saw carriage for log band saw Hydraulic log band saw carriage 5 clamping blocks Double V-turner Rind turner hydraulic system Lodpfx Aoqwnzied Nohb Control boxes Distance to saw blade max. 1000mm Claw opening 900mm Distance between the clamping blocks: 1000mm - 1450mm - 2050mm - 3000mm Distance between the outer clamping blocks 7500mm Track width 1300mm Total length 9000mm Total width 2450mm total height 1750mm immediately available already dismantled and ready for loading without saw, without saw stand

Condition: excellent (used), functionality: fully functional, Complete hydraulic feed unit for EWD Esterer creel type HDE. Very well maintained. Infinitely variable from 0 - 12m / min. Lhedpfjrrxtpsx Ad Nsb

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Very stable creel roller conveyor with hydraulic lift and lowering cross conveyor. 1st part: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Lhjdpfx Aot Hg Husd Neb Overall height 1,000 mm. Built-in hydraulic lifting and lowering cross conveyor With 4 chain strands. Spacing: 1,500 - 1,300 - 1,000 mm. Fully plated. Hydraulic model support rollers. Drive via geared motor. New bearings. 2nd part: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lifting and lowering cross conveyor with 6 chain strands. Unsupported, it is possible to convey the cut material under the roller conveyor to the left or right. Fully plated. Including hydraulic unit for both roller conveyors.

Condition: excellent (used), functionality: fully functional, Base plate for Esterer sash cutters type SS 71 or HD 71 with main shaft and bearings. Equipped with full and idle pulleys. Lhodpfx Asth Udmsd Njb

Condition: good (used), Year of construction: 1977, functionality: fully functional, High-Performance Frame Saw / HIGH SPEED FRAME SAW EWD HDN 600 Year: 1977 / Good condition, continuously maintained (can also be fully overhauled and brought up to the latest standard upon request!) TECHNICAL SPECIFICATIONS: Well-maintained high-performance full frame saw Frame width: 710 x 735 mm Stroke: 600 mm Speed: 310 rpm Fully hydraulic with automatic overhang adjustment Hydraulic saw tensioner and saw mounting Drive motor and intermediate gearbox Electrical control cabinet with PLC Splitter wedge type AVER, hydraulically driven In very good condition! (Machine can also be delivered fully overhauled if required!) Top condition with remote-controlled carriage 3. Double Edger / Edger Paul KME II with Conveyor Belt KME II, Year: 2010 (As new condition) Cutting height: 125 mm Working width: 750 mm Drive power: 38 kW 4. Complete Waste Disposal with Metal Detector Chipper Rudnick & Enners TH150/500/3 With conveyor belts for material removal and processing Equipped with metal detector for safety and quality of finished products 5. Summary The entire line is in excellent condition and can be inspected at any time. All machines are well maintained and fully operational. 6. Inspection and Contact Lhsdpfxew S S A Ho Ad Nsb The machines can be viewed at any time. For further questions or to arrange an inspection appointment, please do not hesitate to contact us.

Condition: good (used), 2 pieces of frame stands. Oscillating shaft and overhung shaft. 2 pieces of split lower frame rollers. Ljdpfx Aswwr Eajd Nehb Shafts and bearings for rollers. Guide bracket, etc.

Condition: excellent (used), 2 pieces stilts for Esterer creel type EHD 30. Only 6 years in use. Lodpfxeip Uf Uj Ad Nehb Also for other Esterer creel types stilts and spare parts available.

Year of construction: 1990, condition: excellent (used), 1 piece mass balancer for creel. Lhjdpsfm Ev Rjfx Ad Nsb With complete accessories and attachments. Little been in use.

Condition: excellent (used), Spare parts for creel LSH 65, partly as good as new, new and used. Swing, stilts, hydraulic cylinders, chain drives, feed gears, guides, solenoid valves, overhang parts. Saw frame top and bottom, Lhsdsi T Egpopfx Ad Njb Saw hook with insert hinges. Pulleys. Spare parts also available for Esterer sash gang SS 71.