Used Dowel Inserting for sale (2,308)

Condition: used, Year of construction: 2012, Dowel insertion machine Manufacturer: Weinig Type: UniPin 100 Year of manufacture: 2012 Technical data - Working width max. 260 mm - Workpiece thickness max. 150 mm Bjdo Ahpw Nopfx Aknslp - Number of insertion stations: 1 - Dowel diameter max. 8 mm - Dowel length max. 60 mm Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: not inspected (used), Year of construction: 2013, Bore diameter , mm Number of heads horizontal , St. Number of heads vertical , St. Götzinger Drilling and Milling Centre ----- For sale on behalf of a client! Machine for ‘left-hand’ and ‘right-hand’ parts. The machine was controlled via window-making software, but can also be operated via the machine’s own software. The machine is equipped as follows: - Drilling units on the left and right for end-face drilling. - 3 units for drilling and milling for longitudinal machining. - Parts are loaded once and the unit carrier then moves to perform the Bsdpev N N Spsfx Aknelp various machining operations. Machine installation length approx. 6 m. For further information, see the attached PDFs.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Dowel Insertion Machine Ganner Selekta 252 Bjdpfx Aksycf Ikonslp Year of manufacture: 2009

Condition: like new (used), functionality: fully functional, Dowel inserting machine with operating gun for simultaneous glue application and dowel insertion Standard dowels Ø8 mm Blsdpfxsqu N U Ds Aknjp Dowels lenght 25 - 80 mm Nominal capacity 1 dowel/second (includes glue application) Uses PVA adhesives (glue) in water dispersion viscosity 200-400mPa 1 pcs TANK FOR GLUE capacity 8 kg 1 pcs TANK FOR WATER capacity 8 kg Maximum pressure 5 bar

Year of construction: 2013, condition: used, We are offering this used TE Connectivity Insertion Machine P 300 pin inserter, year of manufacture 2013. Operating condition: "System functionality is no longer fully ensured. Functional limitation: After switching on, automatic initialization/homing does not work." If you are interested, we are certainly open to negotiating a price. Machine type: Insertion Machine P 300 Serial number/part number: 1-1372900-4 Manufacture date: 01/2013 Supply voltage: 230 V Phases: 1P~ Frequency range: 50/60 Hz Rated current: 2.5 A Max. current: 10 A Short-circuit current: 50 kA Required air pressure: 6 bar Weight: 1600 kg If you have any questions or need further information, please feel free to send us a message or call us. Blsdpsy R I Uwsfx Aknep

Condition: excellent (used), Year of construction: 2002, I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KTC. Year 2002. Bljdot N Rixspfx Aknep 2 pcs. CNC drilling heads from top. 1 pcs. Glue spraying head 3 pcs. 3Master vibratori Vibration dowel inserting device. Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.

Condition: excellent (used), Flexible N.C. automatic line for drilling, routing and inserting (hardware). Numerical control with Albatros software. Consisting of: KZ2046) Infeeder with hedgehog (buffer) store (18 positions) KZ2047) Transfer with motorised conveyoring belt KZ2048) CNC Mod. Vector GLR-X 30-13 KZ2049) Transfer with motorised conveyoring belt KZ2050) CNC Mod. Vektor XK 40-13 KZ2051) Transfer with motorised conveyoring belt KZ2052) CNC Mod. Idrak 3 KZ2053) Transfer with motorised carpet with 90° inclination on a rollers table KZ2054) Rollers conveyor with also motorised belts (to move panels at 180° to the Bsdpfx Ajidmkrjknolp assembly lines)

Condition: new, Year of construction: 2023, machine/vehicle number: 15562, type of input current: three-phase, overall weight: 900 kg, input voltage: 400 V, operating pressure: 7 bar, input frequency: 50 Hz, Single-sided drilling and dowel insertion machine Omal Velox 1300, manufactured in 2023. Equipped with a glue gun sensor and a laser measuring device. Bledpjz Ngkdofx Aknop

Condition: new, Year of construction: 2025, Advantages of Pre-glued Dowels • No additional glue required when inserting dowels • No cleaning required for the water supply system Advantages of the DübelJet • Recoil-free gun • Simple handling • Mobile handheld device • Universal application range Technical Data of the DübelJet Dowel system and water supply system designed for pre-glued dowels • Dowel diameter: 8 mm • Dowel length: 35 mm (default setting, adjustable from 30 to 40 mm) • Dowel projection: 12 mm (default setting, adjustable from 7 to 20 mm) Universal application • Insertion of pre-glued dowels (with water), especially in furniture manufacturing • Insertion of positioning dowels (without water) made of wood or plastic, e.g., in frame construction or in combination with screws or cabinet connectors Bedpfxjwu Dnnj Aknjlp

Condition: excellent (used), Double-sided machine, which can be placed in line after a through-feed Multi Borer for the automatic processing cycle of boring and dowels inserting - Electronic Programmer "CNI" NC 400 - Built-in command and electric cabinet - Max. distance between the horizontal heads mm 3200 approx - Movable and adjustable right side of the machine (according to the width of the panels) - No. 2 motorized conveyoring belts (HP 0.25 x 2 motors) - No. 1+1 dowels storage tanks for the automatic feeding to the nozzles Bsdew Ug A Hopfx Aknjlp - No. 6+6 horizonal inseritng nozzles (Glue injectors and dowel drivers) - High-pressure Glue-feeding system - Total installed power KW 5 ca.

Year of construction: 1990, condition: good (used), I sell the dowel inserting machine Cerisola Savona V3B. Vibrations magazine and inserting head designed for 8mm dowels. Available immediately. Bledpfx Asgzltnoknep 220V connection

Condition: new, Year of construction: 2026, functionality: fully functional, Gannomat Selekta Dowel Insertion Machine Year of manufacture: 2026 Dowel insertion machine with a pistol grip for simultaneous gluing and dowel insertion. Designed for professional and efficient dowel processing in furniture and frame construction. • Consistent dowel insertion depth Bledpfx Aovxgm Noknep • Always consistent and correct amount of glue • Due to the correct amount of glue, no subsequent cleaning of the workpieces is necessary • Easiest cleaning of the gluing system via EasyClean, the automatic cleaning program • Automatic ejection of dowels with incorrect diameter and length by the Auto-DL selector • Dowels are not driven in based on force; the dowel insertion depth is set independently of the bore hole depth • Recoil-free, extremely lightweight, and comfortable glue-dowel insertion pistol • Significant time savings compared to using a glue bottle and hammer

Condition: used, Year of construction: 2000, 220V, 1 phase, 50Hz Air connection: 6 bar Complete in standard design with: - Dowel feed via electronic vibratory feeder - Automatic dowel length and dowel diameter control - Fully automatic electronic control with program selector switch GLUING – APPLYING – INSERTING - 8-stage glue quantity selector switch via time pre-selection by electronic control - Closed glue system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Selector switch GLUE/WATER for rinsing the glue system - Control lamp for displaying the remaining glue quantity in the glue container Blsdpfx Akjzktq Ienep - 1 stainless steel container for 5 kg of glue and - 1 stainless steel container for 5 liters of water for rinsing including 1 gun for dowels Ø mm, dowel length 25 - 50 mm, pre-set to 35 mm, insertion overhang 7 - 20 mm Location: Nattheim

Condition: new, Year of construction: 2022, Demonstration machine Year of manufacture: 2022 Bledpfxowt E Tvo Aknop Equipment and technical data: Base machine 7402 with Pin-Jet dowel insertion function Handheld control device 2D barcode scanner Uninterruptible power supply (UPS) Quattro-HSK package incl. 4-position tool changer XL drilling head Double drill spindle in Y-axis Automatic central lubrication Availability: short notice Location: Flörsheim

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 100 mm Z axis - 105 mm Bedpfx Aod Ih Hyoknslp 1 drilling unit horizontal (dowel drilling unit left) Drilling motor 380 V, 1,100 W Clamping chuck d = 8/10 4,000 - 11,000 rpm can be adjusted 1 drilling unit vertically from above - fixed Drilling motor 1.1 KW, 3,000 rpm Quick change of the drill head 1 drill head BKF 2/3, quick-changeable, (corner bearing) On the loose part, hardware according to customer requirements including drill replacement Control: electro-pneumatic with three axes NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE compliant, with 1 set of drilling tools Dübo je 1xd = 6,8,10,14 + 2 Roughing cutter d = 16, 1 milling cutter d = 20, ready for connection 1 drill head BKF 3, fast exchangeable for olives including drill bit Fitting according to customer requirements 2 drilling units 1 x horizontal for drilling from above (for tapes) 1 x vertical for dowel work, right Drilling motor 1.100 Watt, infinitely variable 4,000 - 11,000 rpm with collet chuck ER 20 2 Milling units for lock boxes 1 x horizontal for tapes, lock boxes 1 x vertically from above for PZ, pushers, tapes Milling motor 2.2 KW Speed ??adjustable 3,000 - 16,000 rpm Clamping tool holder ER 25 1 length stop right and left, working length 2.8 m NC-controlled When the length stop is used, the fixed stops are removed. Dimension: LxBxH = 2.50 x 1.50 x 2.20 m - Weight machine 850 kg PowerDrill LxBxH = 0,30 x 0,30 x 6,00 m - Weight length stop 100 kg 1 Dübelleim- and press-in station consisting of: - Swing conveyor for dowels with feed -Dübeleinpressstation -High pressure glue pump made of stainless steel with glue container - Full jet valve for precise glue application Exhaust nozzle Price for 1 dowel diameter The basic machine will be about 300 mm longer (Technical data according to manufacturer - without guarantee!)

Condition: used, Year of construction: 2006, functionality: fully functional, TECHNICAL DETAILS Components ADVANTAGE C transverse loader: automatic ROTATING DEVICE (flipper): available BIESSE FTT: with 4 heads, drilling and milling, automatic tool change BIESSE FHT: 2 WORKING UNITS horizontal drilling and dowel insertion WANDRES: brush cleaning from top ADVANTAGE SC transverse unloader: automatic Plate dimensions Plate length: 240 - 3,200 mm Single panel width: 140 - 1,550 mm Plate width: 140 - 800 mm Plate thickness: 12 - 60 mm Drilling units Drill heads FTT 800: 2 machining centres with 4 boring units - 5 working tables Vertical spindles (X-direction): 14 independent per head Blodpfx Aoy Ui Rnsknjp Vertical spindles (Y-direction): 18 independent per head Horizontal spindles (X-direction): 3 independent, with double output Horizontal spindles (Y-direction): 3 independent, with double output Tool change system Revolver cartridges: 2 Positions per cassette: 56 Application: Automatic tool change of the vertical spindle centers on 4 drilling units of the two machining centers A and B. Milling spindles Electro spindle 1: 3.7 kW (5 HP), ISO 30, with inverter and 3-way tool change rack Electro spindle 2: 3.7 kW (5 HP), ISO 30, with inverter and 3-way tool change rack Lateral positioning units Workstations: 2 for parallel processing of identical or mirror-inverted panels left positioning element: fixed for lateral reference Right positioning element: movable in X-direction, on lower supports, linearly guided Adjustment: automatic according to the X-dimension of the panel Drive: Brushless with digital control Function: Detection of the actual X Length in the machining center, automatic correction of the drilling positions Max. travel speed: 120 m/min Loading and unloading Infeed system: 1 belt conveyor with cross feed, single drive Unloading system: 1 belt conveyor with cross feed, single drive Additional: Cleaning fan in the unloading area Drill heads FHT (horizontal): machining centres with 2 working units (1 LH unit / 1 RH unit) - 3 working tables. HORIZONTAL BORING UNITS with 24 independent spindles to be installed onto 2 operating units HORIZONTAL INSERTING UNITS WITH 5+5 GLUE INJECTORS AND 8 mm. DIAMETER DOWEL INSERTERS TOOL-HOLDER ADAPTOR for the quick change spindles of the boring units. GLUE INJECTION AND DOWEL INSERTING UNIT for 8 mm. dia. dowels to be added to the standard ones. The unit is prearranged for the insertion of 8 mm. diameter and 25-35 mm. long dowels.* The 8 mm. diam. dowel inserting units are required. NOTE: Dowel inserting unit was never used and not tested. Not possible to be tested ADVANTAGE C 3200 TRASV. 1 POS - loading ADVANTAGE SC 3200 TRASV. 1 POS - unloading Security features Standards: CE compliant Safety equipment: Extensive protective enclosures

Condition: new, Bore diameter variabel mm Bledpfx Aed Ih Hqjknjp Number of heads horizontal 3 St. Number of heads vertical 4 St. weight 1500 kg Dimensions (L/W/H) 4800x1600x2400 mm Width mit Auflage 2300 mm Götzinger Power Drill Type BF 315 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. Milling horizontally for lock case / fitting etc. machine description Base frame in stable welded construction, linear guide for the X-axis Table top 3,000 x 200 mm 6 clamping cylinder pneumatic with auto. Ausweichhub 2 side stops for machining on the front side, manually swiveling in and out 2 longitudinal stops can be manually swiveled in and out Travel: X-axis - 3,000 mm working length Y-axis - 120 mm Z-axis - 105 mm Aggregate: 1 drilling unit (unit 1) vertically from above, drill motor 1,1 KW Speed ??1,500 - 12,000 rpm, 1 spindle, collet holder ER 20 1 Bohraggreagt (unit 2) vertically from above, drill motor 1,1 KW Speed ??3,000 rpm, with drill head quick change device 1 boring head BKF 3, olives, quick-change 1 boring head BKF 3/2 corner bearing, quick-change 1 milling unit (Agg.3) vertically from above, milling motor 2 KW, 1,500 - 16,000 rpm, collet holder ER 25 2 horizontal drilling units (Agg.4 and 5) 1.0 KW, 1.500 - 12.000 U / min, Collet holder ER 20 1 milling unit horizontal (Agg.3) 2.0 KW, 1.500 - 16.000U / min, Collet holder ER 20 Electro-pneumatic control with 3-axis control X, Y, Z NC positioning controller make B + R input via TFT display 10 " Machine complete with 1 set of drilling tools dm 6, 8, 10 and 12, 2 roughing carbide cutters HM dm 16, CE compliant, ready for connection Suction connection: 1 x dm 120 Power connection: 1 x 400 V, 16 amps Air connection: 1 x LW 9 mm Dimensions: L x W x H = 4.80 x 1.60 x 2.40 m – Machine weight: 1,500 kg ----- Total price for the configuration listed above, ex works: upon request ----- ----- Options available at additional cost, upon request: - Stop for longitudinal drilling, height-controlled slot stop via NC axis - Online connection to window software; data cable must be provided on site (Klaes, Prologic 3E, Adulo) - CNC module for venetian blinds and circular milling -Remote maintenance module -Milling spindle with HSK mount -HSK 32 tool holder ----- Plus shipping and installation/training (Technical specifications according to the manufacturer—subject to change without notice!) Translated with (free version)

Condition: new, Bore diameter variabel mm Number of heads horizontal 1 St. Number of heads vertical 0 St. Götzinger drill, dowel gluing and insertion machine BLE With the BLE, the workpieces are glued and dowelled on the front. Optional the BLE can be upgraded with a drilling unit, counter milling unit and longitudinal stop will. A 10" touch panel allows easy operation for manual or online operation. Base frame: in a compact design, covered with sheet metal Table support approx. 800 x 200 mm position 1 ----- 1 glue station full jet valve Glue quantity precisely adjustable Glue gun for counter hole gluing position 2 ----- 1 stainless steel glue pump, high-pressure pump and glue hose item 3 ----- 1 press-in station with dowel separation and press-in cylinder item 4 ----- 1 oscillating conveyor for dowels d 8 x 60 mm with feed hose into the injection unit item 5 ----- 1 processing unit with cross table, linear guide and 3NC axis motors X = 200 mm processing width Y = 120 mm processing height Z = 50 mm offset item 6 ----- 1 positioning controller Touch panel 10" color 500 drilling patterns can be created and saved, which can be easily accessed when needed (1 drilling pattern can have up to 16 dowel positions) Software prepared for ONLINE connection With online control, the data for the control must be provided by the software Blsdpfeu Uu Uzex Aknsp be prepared. Our machine can then read and process this data. ----- Total price in this version Pos. 1 to Pos. 6: on request! Options with additional prices: ----- item 7 ----- 1 horizontal drilling unit, 1,000 W drilling motor Speed ??4,000 - 8,000 rpm, collet holder Pneumatic drill feed Surcharge: EUR 4,565.00 Additional accessories such as a larger touch screen, additional dowel station for additional dowel sizes or scanner for Program selection on request! Prices net plus statutory VAT, without packaging/shipping and without Installation. ----- (technical data according to the manufacturer - without guarantee!)

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit Bodpfx Akjif Az Ujnslp - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: new, Year of construction: 2026, Dowel inserting machine with gun for simultaneous glue and dowel insertion. For professional and efficient dowel processing in furniture and framework. Short introduction: • Constant outstanding dowel length projection • Always constant and correct glue amount Blodpfx Aodx Abuoknjp • Simple cleaning of the gluing system through EasyClean, the automatic cleaning program • Automatic rejection of dowels with the incorrect diameter and length through Auto-DL-Selekt • Dowels are not inserted to the bottom of the hole, the outstanding dowel length projection is adjusted independent to the drilling depth • Recoilless, extra light and comfortable glue-dowel-inserting-gun • Great time saver compared to squeeze glue bottle and hammer

Year of construction: 1990, condition: defective spare-parts repository (used), I sell the dowel inserting machine Cerisola Savona. Vibrations magazine and inserting head designed for 8mm dowels. Inserting gun missing ! Available immediately. 220V connection Bedegzlrbjpfx Aknelp

Condition: good (used), Code: 0072 Brand: T.O.P. ITALIA Model: FS 850 - CE Standard Drilling and inserting gluing machine + dowel pins on horizontal workpieces for furniture, custom-made furniture, kitchens, bathroom furniture - CE Standard - Year 2018 Bledpsyv Inzjfx Aknop Technical data: Maxworkable length mm 1600 Max workable height 850 Panel thickness mm 8 - 50 Independent drilling aggregate: Rotation speed 6000-18000 rpm - Max drilling depth mm 35 - Drilling depth adjustment - Hole cleaning system Glue + dowel insertion unit: Dowel dimensions mm 8 x 30 - Max dowel protrusion 15 mm Glue and water system: Container for automatic glue feeding and system cleaning Feeder for automatic pin loading Numerical control and operator interface: Albatros numerical control for 4-axis control - Touch screen supervisor PC - Monitor 12" TFT - Windows operating system - Parametric CAD 3D TPAEdi32 Compressed air 6 bar Overall dimensions mm 1800 x 1900 x 2100 h Weight kg 500

Condition: used, Year of construction: 1971, No minimum price – guaranteed sale to the highest bidder! Blodpfx Akez S Euaonop TECHNICAL DETAILS Work area Swinging diameter: 520 mm Swinging diameter over cross slide: 400 mm Swinging diameter in the chuck: 1,000 mm Turning length: 1,250 mm Spindle Spindle speed range: 11.2–1,120 rpm Performance data Total power consumption: 7 kW Machine weight: approx. 3.8 t Dimensions Space requirement: approx. 2.7 × 1.7 × 1.7 m EQUIPMENT 4-position tool holder with quick-change inserts Digital display

Condition: excellent (used), CNC Flex Automatic through-feed DRILLING and DOWELS INSERTING LINE (with Supervisor) Min/Max panels width (X axis) with FTT: mm 240 / 3100 Min/Max panels thickness (Z axis) with FTT: mm 12 / 60 Min/Max panels length-depth (Y axis) with FTT: mm 140 /1550 (max 800+800 with 2 panels) A) Double-station gantry loading system Mod. Winner 1 (up to 17 cycles/min), with baseboards distributor and related automatic management B) 1st connecting transfer unit with tilting device (turner 180°), Mod. OT C) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 R8 - No. 2+2 horizontal drilling units BH18 (2RH+2LH), each with 18 spindles (36 RH+36 LH), 72 tot. spindles - No. 2 chain-type tool magazines (1 RH + 1 LH), each with 59 tool positions (118 in total) - No. 4 upper drilling units BH38 (each with 18 vertical spindles in Y + 14 in X + 4 horizontal spindles in Y) (Total: 72 vertical spindles in axe-Y + 56 vertical spindles in axe-X + 16 horizontal spindles) D) Dowel insertion machine "BIESSE" RD - No. 2 horizontal insertion units (1 RH+1 LH), each with 5 nozzles (5 RH + 5 LH), 10 nozzles in total E) 2nd connecting transfer unit with tilting device (turner 180°), Mod. OT F) "WANDRES" cleaning brush Blsdpfx Aj Agut Ajknop G) Double-station gantry unloading/stacking system Mod. Winner 1 (up to (up to 17 cycles/min), with baseboards distributor and related automatic management

Condition: used, Year of construction: 2013, WEEKE OPTIMAT ABD 150, manufactured in 2013. CNC-controlled drilling, gluing, and dowel insertion machine for furniture components. Equipment: - 3 individually controlled vertical drilling spindles, spacing 32 mm - 3 individually controlled horizontal drilling spindles, spacing 32 mm - Gluing unit with adjustable glue quantity - Dowel insertion unit for standard dowels 8 x 30 mm / 8 x 35 mm - Automatic dowel feed via vibration feeder - 4 upper clamping cylinders - Left, right, and center workpiece stops - Automatic central oil lubrication - powerControl with woodWOP and ABDWork Bledpfx Aks Afawbsnsp Workpiece range: Length 20–1,250 mm, width 100–800 mm, thickness 10–60 mm. The machine is located in the TEC-WOOD warehouse in Poland, approximately one hour from Frankfurt (Oder). The original photos show the machine in its previous location. Inspection, functional testing, and detailed information on the scope of delivery are available by appointment. Price on request. Offer includes free loading onto a truck. Transport is subject to separate agreement. High-quality machines sourced from Germany, Austria, or Switzerland. Consulting and sales handled by DS-Maschinen in Stuttgart. PC and software as shown in the original photos: woodWOP 6.1; Microsoft Windows XP Embedded, Version 2002, Service Pack 3; Beckhoff C9900-I374 v1.1. Counter photo: Total operating time 24,701.5 h, production time approx. 1,806 h. The values refer to different types of counters and the status of the available recording.