Used Spreader for sale (544)

Condition: good (used), Year of construction: 1983, functionality: fully functional, THOROUGHLY CLEANED AND REPAINTED MACHINE Dedpfx Aozxr Uhelbjkt Working width 1,300 mm Roller diameter 149 mm Feed rate 22 m/min Max. pass height approx. 100 mm Mobile version with 2 rollers on the rear machine frame Connection data: 400 V, 50 Hz, 3-phase, N

Condition: good (used), Year of construction: 1996, Field of application: Agriculture Empty weight: 7.500 kg Technical condition: good Visual appearance: good Production country: DE Please contact Vink Machinery for more information Unimog U1400 Rail * 1996 * 142505 kilometers Dkjdpfx Aozg N A Solbot * Diesel * 4x4 * 7500 kg own weight * Equipped with snow plow * Equipped with sand/salt spreader * equipped with Rail wheels

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Working width: 30 cm Dodszxpvvepfx Albokt Adjustable glue application rate Single-sided glue application Emergency stop button (mushroom switch) Feed table with rollers Total table length: 130 cm Weight: 150 kg 380 V Year: 2003

Condition: ready for operation (used), functionality: fully functional, External dimensions: 2500 × 1300 mm Dedpfx Ajzxz H Helbskt Stepless feed speed adjustment Year of manufacture: 2017 Motor power: 0.75 kW

Condition: good (used), Year of construction: 2007, functionality: fully functional, working width: 1,400 mm, roller diameter: 240 mm, passage height: 80 mm, height adjustment type: electric, working height: 870 mm, roll width: 1,500 mm, workpiece height (max.): 80 mm, Bürkle DAK 1400 adhesive application machine, from the first owner, in well-maintained condition: – Machine for single- and double-sided adhesive application – Adhesive application on the top and bottom (4-roller machine) – Robust industrial design – Direct drive of the application rollers – Separate direct drive of the metering rollers – Metering gap adjustment with mechanical digital display – Height adjustment with mechanical digital display – Roller parallelism adjustable via sliding coupling – Infeed with 3 driven rollers for part length min. 350 mm – Outfeed with 3 driven blade disks for part length min. 350 mm – Frequency-controlled drive 6-30 m/min – Motorized height adjustment via push buttons – Working width max. 1400 mm – Clearance height up to 80 mm – Working height above floor approx. 870 mm – 2 application rollers Ø 240 mm – Grooving 20 pitches per inch – 2 metering rollers Ø 190 mm Dsdpfx Aezuv Dfelbekt – Roller width 1516 mm – Drive power 3 kW – Operating side Right – Paint finish RAL 7035 light gray – Year of manufacture 2007, first owner, well-maintained condition – Sale from location Karlsruhe / Southern Germany – Inspection and trial operation possible by arrangement

Condition: used, loading space volume: 1 m³, Year of construction: 2011, Empty weight: 540 kg Dkjdpfx Aezzdc Njlbet

Condition: excellent (used), Year of construction: 2019, operating hours: 500 h, functionality: fully functional, machine/vehicle number: LU19H00399, input voltage: 400 V, type of input current: three-phase, input current: 26 A, Nordson VPUR-Slug unit. PUR adhesive melter with 5-meter hose and adapter nozzle. Fully functional. 500 operating hours. Single gear pump. Two hose connections. Additionally, includes many new consumable parts and a new 5-meter hose. Dksdpfxoy Hl Nke Albot

Condition: not inspected (used), Year of construction: 2010, total length: 10,000 mm, total width: 1,900 mm, total height: 2,200 mm, overall weight: 4,000 kg, working width: 700 mm, For Sale: Tromp Laminating Line Year of manufacture: 2010 This line was previously used for producing Ciabatta bread. Included: - Multi-roller unit - Cross-roller unit - Unrolling roller unit - Guillotine unit - Spreaders Dksdpfxjzv Sfzj Albst - Various side cutters - Spreading belts Working width: 700 mm It is possible to view the line on-site. If you have any questions or comments, please do not hesitate to contact us.

Condition: ready for operation (used), working width: 2,000 mm, roller diameter: 350 mm, Glue spreader for plywood manufacturing. Width or length of the glue rollers: 2000 mm Diameter of rollers: 350 mm Rollers are covered with some Polyurethane material. Dkjdpfx Aszazftjlbot The unit is frequency controlled for the feeding speed.

Condition: used, Year of construction: 2009, Second-hand machine Year of manufacture: 2009 Condition: factory-refurbished by Osama Technologies Features and technical specifications: - Automatic gluing machine with two rollers - Working width: 1000 mm - Usable working thickness: 0–100 mm - Application rollers Ø 185 mm - Feed speed 24 m/min - Work surface height: 800 mm - Groove spacing between rollers: 2 mm - Motor power 0.37 kW - Glue distribution tank made of painted sheet metal - Water tank made of galvanised sheet metal - CE marking - Voltage 400/50/3Ph Availability: at short notice Location: Röllbach Dksdpfx Ajzk Nxbjlbot

Condition: like new (used), functionality: fully functional, input voltage: 400 V, overall weight: 80 kg, input current: 11 A, Condition: Practically NEW – only used as a demonstration machine (see photos of the very clean interior) Suitable for 2 kg PUR containers (cartridges/blocks) Ideal for edge banding machines, profile wrapping, or other adhesive applications. MOD Technology (Melt-on-Demand): Only melts the required amount of adhesive – prevents PUR glue from burning. Dsdpfjy D Hfzjx Albokt Compressed Air/Protective Gas: Operation requires dried compressed air or CO2 (important for PUR processing) Operation: Simple and robust membrane keypad Electrical Connection: 3LPE 400V 50/60Hz Rated Power (Pmax): 4200 W Maximum Current (Imax): 11 A Weight: approx. 80 kg (according to manufacturer) Protection Class: IP32 The unit is fully functional, exceptionally clean, and ready for immediate use. Location: Líšťany 33035, Czech Republic (approx. 50 km from the German border / Waidhaus) Search terms / Suitable for equipment from: Homag, IMA, Biesse, Brandt, Holz-Her, SCM, Stefani, Hebrock, Felder, edge banding machine, edge bander, PUR adhesive, premelter, profile wrapping.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, working width: 200 mm, working height: 40 mm, Equipment: documentation/manual, Impregnation machine / Coating machine Manufacturer: Schiele Type: Impregmat VM Mini Year of manufacture: 2016 Board coating machine with brush application, suitable for coating profiled boards, moldings, and construction timber. Suitable coating systems: Suitable for water-based paints and coatings Suitable for solvent-based paints, stains, and coatings Working width: approx. 30 - 200 mm Workpiece height: approx. 5 - 40 mm Workpiece length: from approx. 800 mm - endless Dkedpfxezpydrj Albst Feed speed: approx. 20 m/min pneumatic double-diaphragm pump Stainless steel machine body for easy cleaning with roller conveyors before and behind the machine, length approx. 2000 mm each Documentation & wiring diagram available

Condition: used, Year of construction: 2021, functionality: fully functional, System for oiling and staining solid wood flooring / parquet flooring Manufacturer: Cosma Year of manufacture: 2021 Working width: 400 mm Passage heights: 10 - 50 mm Part lengths: from approx. 700 mm consisting of: - Roller application machine, manufacturer: Cosma, type 400 RC equipped with 1 rubber-coated application roller, approx. 25 Shore, and 1 metering roller for applying oil Feed speed adjustable, 3 - 15 m/min. with stainless steel collection tray for easy cleaning during material changes with electric height adjustment and mechanical height indicator - Spreader machine, manufacturer: Cosma, type 400 2P2S (year of manufacture: 2021) 1x spreader pad, 0.37 kW, rotating to the left 1x spreader pad, 0.37 kW, rotating to the right 1x spreader brush, 0.37 kW, speed infinitely adjustable 100 - 300 rpm, co-rotating, electric height adjustment 1x spreader brush, 0.37 kW, speed infinitely adjustable 100 - 300 rpm, counter-rotating, electric height adjustment - 1x pad brush cleaning machine and 1x longitudinal brush cleaning machine, manufacturer: Cosma, type CU Pad + CU Brush Dedpfezzdm Isx Albjkt

Year of construction: 1985, condition: used, Cargo space capacity: 5.000 l Dedpfxjzbmh Ne Albekt

Year of construction: 2007, condition: used, functionality: fully functional, empty load weight: 1,500 kg, total length: 6,000 mm, construction height: 2,400 mm, load capacity: 10,000 kg, construction width: 650 mm, Spreader Condition: Ready for use and fully functional Technical condition: very good Description: Container spreader 20 Dodpfx Ajzxi Hnelbskt Container spreader 20

Condition: good (used), Code: 0298 Brand: OSAMA Model: S1R-250 - CE Standard Manual 1 roller gluing machine for edges and block wood, carpentry, furniture, laminated wood beams, and various - CE Standard Technical data: Max working length 250 mm Roller diameter 150 mm Feed speed 28 m/min Motor power Hp 0,25 Dedeyi E Hgjpfx Albjkt Working table height 800 mm Overall dimensions mm 1500 x 700 x 850 h Weight kg 100

Condition: new, Year of construction: 2025, Working width: 1300 mm Manual adjustment of element height Glue dosage adjustment CE marking Djdpfozx U Tasx Albjkt Safety switch Power supply: 380 V Completely new, year 2025

Condition: used, Year of construction: 2021, Hilltip IceStriker 550 Spreader, Year of Manufacture 2021 | Returned from Rental | Very Good Condition | Immediately Available Compact professional spreader for municipalities, municipal depots, and service providers. For sale is a Hilltip IceStriker 550 from the year 2021. This spreader comes from our rental fleet and has been regularly maintained. The unit is in very good, well-maintained condition, is technically flawless, and ready for immediate use. The IceStriker 550 is the ideal solution for pick-up trucks, municipal vehicles, and smaller winter service vehicles. Thanks to its compact design, wet salt technology, and extensive special equipment, it enables economical and precise winter service operations. Dedozzhbvjpfx Albjkt Technical Data Manufacturer: Hilltip Model: IceStriker 550 Year of Manufacture: 2021 Condition: Used, Returned from Rental Hopper Volume: 550 liters Drive: Electric Hopper Material: Corrosion-resistant polyethylene Spreading Material: Salt, wet salt, grit, and sand-salt mixtures Dimensions Length: approx. 1,420 mm Width: approx. 1,220 mm Height: approx. 1,060 mm Special Equipment: * LED rear lighting including license plate kit * Warning light for increased safety during operation * White LED work light * Large hopper (+25 cm) for optimized material distribution * Sensor with alarm function when material is low * Salt pre-wetting unit * Manual spray nozzle Your Advantages: * Well-maintained, returned from rental * Regularly maintained * Technically flawless condition * Compact design for versatile carrier vehicles * Wet salt technology for economical spreading material usage * Very good availability of spare parts * Ready for immediate use The Hilltip IceStriker 550 offers professional winter service technology in a compact design. Thanks to the integrated wet salt technology, material level monitoring, and extensive special equipment, this spreader is ideally equipped for municipal and commercial winter service operations. Inspection and demonstration possible by appointment. Financing and nationwide delivery available upon request. Location: 10114

Condition: used, Year of construction: 2025, _____Year of manufacture: 2025 Engine capacity: 1500 cc Tank capacity: 14,000 liters Pump capacity: 4000 liters Suction inlet: right/left Suction arm: right Tires: 750/60R 30.5 Hydraulic drawbar adjustment Front cutter Electric forced steering Automatic filling system with shut-off function Dksdpfx Aszxvnlslbot Signo Smart control system Bomech with two cutters 6-inch suction arm with 8-inch ball Half-width control via slide valve Bomech spreading shoe distributor Speedy Small 12 M (optional 15 meters) Vehicle not registered Like new Storage location: Getränkemarkt-Platz

Condition: used, Year of construction: 2017, STREUMASTER SW3 FC 3 Cubic Meter Lime Spreader / Soil Stabilizer Tank: • Year of manufacture: 2017 • 3 m³ tank capacity • Filling connection: 3" / 3" Spreading Unit: Dodpfx Aswv H Nqelbekt • Working width: 2,460 mm • Section widths: 3 x 820 mm • Spreading rate at 1 km/h: 1-50 kg/m² (with a binding agent density of 1 kg/liter) Weight and Dimensions: • Unladen weight: 1,250 kg • Dimensions: 1,600 x 2,550 x 1,990 mm Tractor Requirements: • Three-point hitch: Category 2 DIN / ISO 730 - 1 • Required hydraulic performance: 50 liters/min at 180 bar • Max. permissible hydraulic flow rate: 75 liters/min • Electrical system: 12 V - Loading possible! - One owner! - German machine! - Ready for operation! Errors and prior sale excepted! = More information = Year of manufacture: 2017 Contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Features and technical specifications: Right-hand configuration 2 side tables are still in their original packaging H&H / HARDO TH 1020-V46 BV DA (twin unit) Max. application width: 2,040 mm (2 × 1,020 mm) Configuration: Twin-unit system, both machines can also be operated individually Application roller: reinforced version Application roller diameter: 46 mm Knurling on application roller: 0.5 mm Bearings: reinforced roller bearings Bearing shells: hardened Squeegee: pneumatically operated, needle-bearing mounted Main bearing lubrication: external lubrication, filled using a hand-operated grease gun Tank seal: adjustable and replaceable without removing the application element Application speed control: via frequency converter Speed range: 3.2 – 19.3 m/min Control: Potentiometer Display: digital speed display Pressure rollers: 2, silicone-coated Pressure rollers, length: 2,040 mm Pressure rollers – diameter: 159 mm Pressure rollers – Actuation: pneumatic Pressure rollers Lowering: automatic after the drive motor is switched off Height adjustment of material feed: electrically driven in manual step mode Stroke of application unit: 0 – 200 mm Conveying height: 925 mm (lower edge of material) Drive for pressure rollers: separate drive Motor: including motor console, mounting and cladding Additional application speed control: via separate frequency converter Additional speed range: 3.2 – 19.3 m/min Additional control: Potentiometer Additional display: digital speed display Base frame: aluminium profile system Stands: 2, made from anodised aluminium plates Adjustable feet: Adjustment range ±25 mm Dkjdpfx Aozk Nzvjlbet Material flow direction: right to left Heating control: Timer (daily and weekly programme) Temperature control: electronic with digital actual value display Melting tank volume: 2 × 25 litres Heating capacity: 2 × 8.0 kW Rated power: 18.5 kW Control voltage: 24 V Rated frequency: 50 Hz Operating voltage: 400 V Phases: 3 Fuse rating: 63 A Compressed air connection: < 8 bar Application: Melting and application of non-reactive hot-melt adhesives Weight: 1,560 kg Availability: at short notice Location: Rhineland-Palatinate

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology Dedpfjy Alcijx Albskt • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: excellent (used), Year of construction: 1998, HÖFER LAN 1300 Adhesive Coating Machine For the efficient application of water-soluble dispersions (white glue, etc.) on one or both sides. Coating width: maximum 1300 mm Drive: 0.37 kW geared motor Rubber-coated coating rollers: Ø 170 mm Grooving for coating quantity: approx. 120 g/m² (for veneers) Constant coating speed: approx. 16 m/min Working height: approx. 900 mm Maximum workpiece thickness: 80 mm Design complies with CE standards Manual feed Operating side: right Dkodpoza A Aaefx Albjt Including swivel casters Machine dimensions L x W x H = 1750 x 660 x 1300 mm

Condition: good (used), Year of construction: 2002, functionality: fully functional, stack height: 165 mm, overall weight: 530 kg, cutting width (max.): 1,135 mm, compressed air connection: 8 bar, insertion depth: 950 mm, Equipment: documentation/manual, Can be coated with an air spreader roller, one or two times Chrome-plated air table Right/left vibration option Tilt adjustment Djdpfx Aezzd Ixjlbskt Adjustable vibration speed Table size: 950 mm x 1,135 mm Layer height, min.: 30 mm Layer height, max.: 165 mm Table height: 860 - 950 mm

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Dkjdpfx Alozy Hpiebot Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system