Used Curing Chamber for sale (4,418)

Condition: excellent (used), Handle UVALOC 400 Loctite 97039 Curing Chamber The UVALOC 400 curing chamber (LOCTITE 97039) is a surface jet curing system, developed for curing light-curing adhesives with UVA rays and visible light. It is suitable for manual curing of individual parts during the production process as well as for laboratories. The following is integrated in the device a control unit with integrated mains switch and operating hours counter a lamp housing with the burner reflector ignitor. In with UV protection box Features: Contains 400 W metal halide lamps Optimized for light emission in the UVA range Typical curing area 10 x 19 cm Expected service life of the UV lamp up to 1000 h The power supply unit can be detached from the lamp module and operated separately Adjustable lamp height for optimum irradiation With glass filter to avoid short-wave UVB/UVC emission Technical data: Mains connection 230 V AC ± 4%, 50 Hz Power consumption approx. 460 W Mains fuse 2 x 5 A, slow-blow Glass tube miniature fuse 5 x 20 mm Warm-up time of the UV lamp 3 minutes Iodpfxjtv H A Tj Afiotn Lamp type 400 W high-pressure metal vapor lamp with base on both sides Lamp life approx. 1000 hours Intensity See section 5.1 Dimensions (width x height x depth): 220 mm 472 mm 300mm Ambient and operating temperature + 10 °C ... + 30 °C Storage temperature - 10 °C ... + 60 °C Weight ~ 11.5 kg Condition: gebraucht / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Dual Chamber During Oven 1,700 x 1,400mm (2,40m2) Process area based on largest substrate; 4.1. Process area (minimal); 1,700 x 1,400mm (2,40m2) 4.2. Substrates are (non-) heat treated, (non-) TCO coated optical white (or standard) float glass sheets with straight or pencil edges and (non-) edge delete patterns (1) 4.3. Substrates are rectangular shaped (2) Itedpfsv T I Iqsx Afisn general Electrical diagram (see appendix 1) Main power supply voltage 3x400 ± 5% + earth, 50Hz ± 5% Control voltage 230Vac 50Hz and 24Vdc Main fuse 140A Engine power Circulation fan motor 2.2 kW (2 pcs.) Drive motor vertical transport 0.39 kW Drive motor horizontal transport 0.09kW 1.5.3 Heating system Heating Heating type Electric with closed tube elements Power 30 kW per room Overall, the system consists of two parts, viz: - The furnace consists of two chambers each with an air circulation fan and adjustable air inlet. - The conveying system consists of a trolley with vertical and horizontal movement. The oven is suitable for curing heat treatments under air atmosphere with cleanroom classification in the temperature range from 50ºC to 250ºC. One heat cycle per chamber can be programmed. The cart can place glass from the conveyer position into one of the two chambers where the products undergo a selected heat cycle. And then removed from the oven and placed back in the conveyor position.

Condition: used, Year of construction: 1909, 3D Systems ProCure 750 Used to cure 3D-printed parts in an automotive manufacturer's development department. Itedpfx Afjv Upuuoijn All the lights are lit and the turntable is rotating.

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Upper part: 40° slope - Lower part: 2% slope. DN 600 hatch with hinged cover at the top. stainless steel pressure-vacuum valve At the bottom, a DN400 hatch with a hinged cover a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Above 2 coils, exchange surface 2.33 m2, PS 2 bar A device for moving grounds, test valve Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Itjdpfx Afsvlpctsion Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Liquid level gauge 555x432 rectangular hatch DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing. The tanks are dismantled and ready for delivery.

Year of construction: 2016, condition: like new (used), functionality: fully functional, machine/vehicle number: GoTx1900/2600FX, The GoTx® 192FX/190FX/260FX are powerful fixation units for pigment inks. Designed to run with the GoTx® 2190/2260 printers for seamless productivity. Isdpfjv Dcc Rex Afiotn Utilising quad zone heater element plates below and above the media horizontally where the fabric is not touched during cure. For consistency we do not employ IR heatlamps to avoid cool cure zones across the media. Fixation on a horizontal path provides better control and avoids smoke, steam or oil which can be dragged across the media = ghost free imaging. Up to 60 linear meters per hour output, with variable top, bottom radial axial fans for steam removal The GoTx® fixation modules are designed for uninterrupted production and media is NOT touched during transfer fixation process.

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Itodpfexphl Rex Afien Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: excellent (used), Type: ClimeEvent C/2700/70/4/W Weiss Technik ClimeEvent C/2700/70/4/W – High-Performance Climate Test Chamber For sale is a ClimeEvent C/2700/70/4/W climate test chamber, ideal for industrial, research, and development applications. Perfect for demanding temperature and climate testing of large components and assemblies. Technical specifications: - Internal dimensions (H x W x D): 1150 × 1990 × 1200 mm - External dimensions (H x W x D): 2250 × 3800 × 1555 mm - Test chamber volume: approx. 2760 l - Temperature range: –72 °C to +180 °C Ijdpfx Afjxpg U Rjijtn - Temperature change rate: 4 K/min (heating & cooling) - Temperature uniformity: ±1.0 K to ±1.5 K - Humidity range: 10% – 98% r.h., deviation ±1% – ±3% r.h. - Power consumption: 8000 W (heating/cooling) - Power supply: 500 V - Refrigerant: Eco-friendly R449A/R469A - Air management: Optimized supply and exhaust air regulation - ESD protection: Fully integrated - Software: Compatible with S!MPATI® for test control and documentation Electrical connection: - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 33.0 kW - Rated current: 18.5 A - Test chamber volume: approx. 2760 liters - Weight: approx. 2000 kg For your safety as a buyer, please note the following! The following procedures are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if required 3. Leak test with certification 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and details subject to change or error!) Further questions can be gladly answered by phone.

Condition: used, Year of construction: 1988, Reaction tank, batch system, solids separator, washing trough, painter's washing area, water treatment, tool and water cleaning, filter press, chamber filter press -Manufacturer: Poligrat, chamber filter press type 470-20/2 -Model: 11 panels -Hydraulic Cylinder: Stroke: 115mm -Dimensions: 1315/920/H1720 mm -Weight: 580 kg Iodshvfznopfx Afietn

Year of construction: 2001, condition: good (used), 1 used hardening furnace Manufacturer: Nabertherm, Type N 321 Serial Number: 160897, Year of manufacture: 2001, Max. temperature: 1,200°C, Itedjxpf I Nspfx Afien Connected load: 400V, 47 kW Internal dimensions: 750 x 1100 x 400 mm Usable volume: 320 liters Weight: approx. 1.6 t Dimensions: Length approx. 2 m, width approx. 1.5 m, height approx. 2 m,

Year of construction: 2016, operating hours: 9,195 h, condition: excellent (used), Vötsch temperature test chamber, water-cooled Here we offer you a Vötsch temperature test chamber. Vötsch 7060-5 water-cooled chamber Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 1995 mm, width: 1090 mm, depth: 1960 mm Test chamber capacity: approx. 600 liters Year of construction: 2016 Operational hours: 9195 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -72°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 6.0 K/min Cooling 6.0 K/min Heat compensation at 20°C max. 5000 W Heat compensation at -20°C max. 5000 W Electrical connection: Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 13,0 kW Rated current: 23.0 A Refrigerant: R-404A and R-23 Ijdet Txttopfx Afistn Weight (approx.): 650 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Year of construction: 1984, condition: ready for operation (used), Two industrial shaft furnaces Nabertherm for heat treatment are available. 1) Nabertherm S430, year of manufacture: 1984, power: 54kW, max. temperature: 1200°C, usable volume: approx. 430l. 2) Nabertherm S300/SO, year of manufacture: 1977, power: 36kW, usable volume: approx. 300l. An on-site inspection is possible. Isdpfx Asxn S Ugjfiotn

Condition: excellent (used), machine/vehicle number: 577EK51, REF: MM6187 1 x Webomatic double chamber vacuum packing machine supplied with 16 x filler plates. Technical specification ⚙️ ✅ Model - ED 120. ✅ Serial number - 577EK51. Itedoxn Rz Espfx Afijn ✅ Sealing bars - 4 x 640mm long. ✅ Distance between sealing bars - 580mm. ✅ Vacuum pump - Busch RA 0100 E 5Z1. ✅ Electrical requirements - 400 V / 50 hz / 3 phase. ✅ Power - 2.2 kW / 5.4 Amps.

Condition: excellent (used), Type: DST 1000 Description: For sale is a dust test chamber, type DST1000, from Testzentrum Baden GmbH. This unit was developed for conducting IP protection class “dust” tests (DIN EN 60529 / DIN 40050 Part 9). Testing possible with or without vacuum. Operation / Features: - Control panel with display and buttons - Manual regulators for individual settings - Preset test routines for standardized testing Technical Data: - Test chamber volume: approx. 1,000 liters - Internal dimensions (W × D × H): approx. 1,000 × 1,000 × 1,000 mm - Overall dimensions (W × D × H): approx. 1,300 × 1,000 × 2,000 mm - Supply voltage: 400 V / 50 Hz, 3~N/PE - Current consumption: 10 A - Total electric power: max. 2 kW - Exhaust connection: DN100 flange Test Performance / Protection Classes: - Dust-protected IP5X Ijdpfjxpfx Ujx Afijtn - Dust-tight IP6X Weight: approx. 350 kg Condition: used Scope of delivery: (See image) (Specifications are subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: like new (used), Chamber filter press from Netzsch. 20 plates 40x40 cm. Condition: excellent. Isdpfx Aexn Azdofietn

Condition: excellent (used), Chamber in very good condition Itodpjxnw Eqsfx Afisn Binder climate chambers are used to test material behavior under constant humidity and temperature conditions. These devices operate within a temperature range from 0°C to 70°C and a humidity range from 10% to 80% relative humidity. The distinguishing feature of the Binder KBF series is absolutely reliable stability testing and precise maintenance of constant climate conditions. Accurate climatic control makes these chambers ideal for stability testing. The climate chamber is based on a modular design, and the interior is lined with stainless steel for easy cleaning. Thanks to the APT.line™ preheating technology, the circulation of air throughout the usable volume is smooth and even. Humidity levels can be precisely regulated and fully adapted to specific requirements. Key features: - Temperature range: 0°C to 70°C - Humidity range: 10% to 80% relative humidity - APT.line™ preheating chamber technology - Humidity control with a capacitive humidity sensor and steam humidification - Airtight inner doors made of safety glass (ESG) - Corrosion prevention on the glass with special TIMELESS coating - Interior chamber made entirely of stainless steel - 2 stainless steel wire shelves - 30 mm access port with silicone plug, left side - 4 robust castors, two with brakes, from 240 L capacity upwards

Year of construction: 2016, operating hours: 14,242 h, condition: excellent (used), Vötsch temperature test chamber, water-cooled Here we offer you a Vötsch temperature test chamber. Vötsch 7060-5 water-cooled chanber Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 1995 mm, width: 1090 mm, depth: 1960 mm Test chamber capacity: approx. 600 liters Year of construction: 2016 Operational hours: 14 242 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -72°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 6.0 K/min Cooling 6.0 K/min Heat compensation at 20°C max. 5000 W Heat compensation at -20°C max. 5000 W Electrical connection: Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 13,0 kW Rated current: 23.0 A Ijdpfx Afst Txqroietn Refrigerant: R-404A and R-23 Weight (approx.): 650 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: used, mileage: 210,000 km, Year of construction: 2011, Serial number: YV2J1E1C5BA71xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21177 Specifications: EU approved until: 08.10.2025 Mileage: approx. 210,000 km Engine: 370 hp, Euro 5T Transmission: Fully automatic Suspension: Air – air Tires: In good condition Superstructure: 2011 Zoeller/SKK Ekopres P1453 Medium XL Autolift Roof bar with warning lights Indicators front and rear Exhaust outlet above cab Camera LED work lights Autoline sand spreaders 3 seats Air conditioning Description:1-chamber refuse compactor truck with pusher axle.Equipped with Autolift and sand spreaders.Handles waste bins up to 660 liters.Low mileage and good tires.Ready for delivery. Km: 210000 HK: 378 Technical approved: no EU-approved until: 08.10.2025 Own weight: 16000 Total Weight: 27000 Payload: 10925 Width: 255 Length: 912 Euro: 5 Itedpfx Aew Sc N Dsfien Model: FM370 6x2 1-kammer komprimatorbil med Zoeller påbygg Gearbox: Automatic

Condition: good (used), Manufacturer: LIEBISCH Type: 42016001 Iodpfxopbv Dpe Afistn Test chamber : 1000 liters

Condition: excellent (used), Type: ClimeEvent C/340/70/3 Climate test chamber, air-cooled Test chamber internal dimensions: Height 750 mm x Width 580 mm x Depth 450 mm Overall dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm Key parameters for temperature testing: Temperature range: -40°C to +180°C Temperature change rate, cooling: 4.0 K/min Temperature change rate, heating: 3.2 K/min Key parameters for climate testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 20% to 90% r.h. Temporal temperature deviation (within working space): ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.0 K Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated output: 4.1 kW Rated current: 14.0 A Refrigerants: R449A & R23 Test chamber volume: approx. 335 litres Net weight: approx. 520 kg For your security as the buyer, please note the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components Itjdpfxjxn Swue Afien 2. Refill with legally compliant refrigerant if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Changes and errors in the technical data and specifications reserved!) For further questions, feel free to contact us by phone.

Condition: good (used), Chamber filter press Netzsch. 32 plates 47x47 cm. Condition: excellent. Dimensions: 320x140x120 cm. Weight approx. 1.8 tons. Isdexnx D Uspfx Afietn

Condition: good (used), Weiss climate test chamber with humidity Here we offer you a Vötsch environmental test chamber with humidity. Vötsch 4060-10 air-cooled with humidity Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 2150 mm, width: 1225 mm, depth: 2890 mm Test chamber capacity: approx. 600 liters Iodpfxot E Sfge Afistn Operation hours: 3354 h Year of construction: 2007 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -40°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.8 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 9.5 K/min Cooling 12.0 K/min Heat compensation at 20°C max. 8000 W Heat compensation at -20°C max. 3000 W Data for climate tests: Temperature range +10°C to +95°C Humidity range 10% to 95%r.H. Temperature homogeneity in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Humidity deviation in time 1 to 3 RH% Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 16,0 kW Rated current: 26.0 A Refrigerant: R-404A The rail pair is available for rolling. Two chambers bottom, one complete, one with hole diameter 300mm. Weight (approx.): 1020 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: excellent (used), Type: SAL 1000-FL PLC / V.715.362.520 For sale is a used VLM Salt Spray Corrosion Test Chamber, type SAL 1000-FL PLC, ideal for industrial corrosion tests in accordance with international standards (DIN EN ISO 9227, ASTM B117). Perfectly suited for both laboratory and production environments to test materials, coatings, and components under controlled corrosive conditions. Features: - Robust stainless steel frame construction, max. load 450 kg - Precise control and reproducible testing Iodpfjxnyqvex Afiotn - Versatile applications for salt spray, condensation water, and ventilation testing Technical details: - Exterior: Stainless steel 1.4301, powder-coated (special version) - Test chamber: Stainless steel, ECTFE-coated - Max. chamber temperature: +80 °C - Temperature stability: ±0.3 °K, temporally ±0.1 °C - Process control: PLC with touchscreen, LED display - Interface: Ethernet - Water quality: demineralized, max. conductivity 20 µS/cm - Humidifier water consumption: approx. 0.5 l/h (depending on program) - Water connection pressure: 2–4 bar - Compressed air consumption: approx. 20 m³/h - Compressed air connection: 6–8 bar - External dimensions (W x D x H): 2160 x 670 x 1090 mm incl. base cabinet: 2160 x 670 x 1890 mm - Internal chamber dimensions (W x D x H) / volume: 1400 x 605 x 920 mm / 1040 l - Max. load sample rod: 40 kg - Electrical connection: 400 V / 50 Hz / 4000 W - Weight (empty): 350 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Condition: good (used), Type: VCS 7034-5 Climatic Test Chamber, Water-cooled Vötsch VCS 7034-5 Test Volume: 335 liters Specifications for Temperature Testing: Temperature range: -70 to +180°C Time-based temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Specifications for Climate Testing: Temperature range: +10 to +95°C Time-based temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Time-based humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R452A / R-23 Important safety information for buyers: The following procedures are carried out on our offered chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. Recharging with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Itjdpfx Ajxmhycsfisn Scope of delivery: (See image) (Subject to technical modifications and errors. All information is non-binding!) For further questions, please do not hesitate to contact us by phone.

Condition: excellent (used), Type: WK3-340/70 Weiss Climate Test Chamber, Water-Cooled Control Unit: “Touch Panel” All control and operating commands can be triggered simply by touching the function symbols on the “Touch Panel” control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for uneven floors and to ensure sufficient ventilation of the machine section. Feed-Throughs The test chamber is fitted with feed-throughs on both the left and right sides. These allow measuring cables and test devices to be routed into the test chamber. Feed-throughs included in the basic configuration: R1: nominal width 125 mm L1: nominal width 85 mm Volume: 335 liters Test Chamber Internal Dimensions: Height: 750 mm, Width: 580 mm, Depth: 765 mm External Dimensions: Height: 1775 mm, Width: 870 mm, Depth: 1600 mm Specifications for Temperature Tests: Minimum temperature: –72°C Maximum temperature: +180°C Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature uniformity spatially: ± 0.5 to ± 1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Specifications for Climate Tests: Temperature range: +10°C to +95°C Dew point range: –3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature uniformity spatially: ± 0.5 to ± 1 K Humidity deviation over time: ± 1 to ± 3% RH Operating Data: Test chamber lighting: Halogen bulb 2 x 24V, 50W Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 16 A Nominal power: 4.9 kW Protection: 16 A slow-blow fuse, to be provided onsite Refrigerant: R-452A/R23 Weight: approx. 585 kg For your security as a buyer, please note the following information! Ijdpfxexmg Sds Afiotn The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data, information and specifications are subject to change and errors.) If you have any further questions, we will be happy to assist you by phone.

Condition: used, Liebisch KEA 300 Constanzo Functional condensate water test device for material and coating testing Description: This device is designed for performing condensate water or water vapor tests in accordance with common standards (e.g., DIN EN ISO 6270). It is ideal for testing the moisture and corrosion resistance of coatings, paints, metals, and plastics. The design is robust, low-maintenance, and perfectly suited for research, laboratory, and quality control applications. Technical specifications: Manufacturer: LIEBISCH Model: KEA 300 Constanzo Nominal power: 1,400 W Chamber dimensions: approx. 500 × 450 × 500 mm (W × H × D) Voltage: 230 V / 50 Hz Chamber material: Stainless steel, corrosion-resistant Controls: None / manual operation Important notice: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See image) Iodpfoxlzm Tsx Afijtn (Subject to changes and errors in technical data; specifications may be updated!) If you have any further questions, feel free to contact us by phone.