Used Cooling Tunnel for sale (8,377)

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 type 90X12 Overall dimension in m: Lengh 10,30 Width 2,30 Height 1,81 Height in cleaning position 2,31 Deep-freezing chamber Lengh 8,70 m Effective width 1,20 m Nsdpfeyf Hlijx Ahksda Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework

Year of construction: 2016, condition: ready for operation (used), A continuous cooling tunnel MF-Hamburg is available. Cooling principle: radiation and convection cooling, working height: 920mm, belt width: 420mm, conveyor belt: PUM2 smooth belt, height adjustment: +/-15mm, infeed length: 2770mm, cooling length: 17000mm, overall length: 20250mm, overall width: 720mm, material: 1.4301. Documentation available. An on-site inspection is possible. Ndedpfx Ahjzmymzskea

Condition: like new (used), Machine ready for operation, year of manufacture 2017, and has only been used for 3 years in soup and sauce production. The machine cools products already packed in glass or plastic containers. Dimensions: Length – 10,330 mm Overall machine height – 2,078 mm Overall machine width – 4,505 mm Discharge height of containers – 1,100 mm Technical specifications: Maximum production: Plastic cup with a diameter of 95 mm and height of 116 mm, thermal cycle 52 minutes (20 minutes pre-cooling + 32 minutes cooling). Cup temperature: inlet +90°C – outlet +20°C Container/cup dimensions: Diameter 95 mm Height 116 mm Thermal cycle duration: 52 minutes (for 95 mm diameter cup) Njdpfxjyl Szvs Ahkeda Empty machine weight: 5,100 kg Total installed power: 26 kW Voltage: 400 V Frequency: 50 Hz Air pressure: 6–8 bar Air flow: 25 Nlt/min Water flow at start-up: 3 m³/h Water flow at full operating speed: 0.2 m³/h Supplied complete with operating instructions in Polish and English.

Condition: like new (used), Machine that enables cooling of any format. The cooler is divided into the following groups: 1- Can inlet. 2- Cooling corridor - ZONE 1 - ZONE 2 - ZONE 3 3- Jar outlet. 4- Drying. Includes: - Infeed and outfeed belts with variable speed motor. - 3 centrifugal pumps - Chemical dosing pumps. Output may vary depending on the format. Ndedpfex S Iu Tjx Ahkea

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Glycol 8.5 meter cooling tunnel Ndedpox Rzrpefx Ahkoa Belt width - 375mm

Condition: used, Spraying the full product with cold water to cool it down to approx. 40 °C. Allows clean labelling and creates a vacuum in the bottle. With cooling tower for recooling the spray water from the tunnel cooler with recirculation. Additional title: full product cooler, with splash water recooling Njdpfxew Tmpdj Ahkeda Capacity of filling line: 5000 bo/h Features: Cooling tower for spray water recooling with circulation (Richter Cooling Systems, 2015)

Year of construction: 2021, operating hours: 8 h, condition: like new (used), functionality: fully functional, Tunnel pasteurizer-cooler Tecninox T.P.N. 4x1.2-3P — as new For sale: professional tunnel pasteurizer-cooler, brand Tecninox (Felino, Parma), model T.P.N. 4x1.2-3P, serial number 317/21, year of manufacture 2021. Ndodjywuzwepfx Ahkoa The machine has only been used once for testing and has never been put into production. It is in excellent condition and comes complete with the original operation and maintenance manual. Key features: - Useful length 4,000 mm, width 1,200 mm - Structure in AISI 304 stainless steel - Polypropylene conveyor belt driven by inverter - 3 Lowara pumps for water circulation - Steam heating with coil and automatic condensate discharge - Multi-stage cooling with spray water - PIXSYS electronic temperature control - Data recorder with USB output (CSV files) - AISI 304 electrical panel with Danfoss inverter - Power supply 380V/50Hz — Installed power 5.5 kW - Steam consumption 200 kg/h at 3-4 bar - Adjustable cycle time from 55 to 240 minutes If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Made in Germany Good working condition Nedoyb Sdiopfx Ahkoda

Condition: good (used), Cooling compressor Stal KTK 207 25-33 Bar YOM 1991 Good condition Ndsdpfxeyb Rquo Ahkea Dimensions (LxWxH): 4700x2200x1450 mm

Condition: used, Year of construction: 2020, Sehr kompakt gebautes Wasserkühlgerät / Very compactly built Watercooled Chiller Kühlgerät / Chiller ef cooling Ernst H. Furrer EVO 60 Typ WKL 520 Wasserkühlgerät / Watercooled Chiller Baujahr / Year 2020 - Serial-No. 0520.008/36732 Kälteleistung / Cooling capacity 60kW Kondensationsleistung / Condensation performance 84kW Anzahl Kältekreisläufe 1 / Number of refrigeration circuits 1 Kältemittel je Kältekreislauf / Refrigerant per refrigeration circuit R410A, 4.4kg 2 Verdichter / Compressor Pumpe / Pump CM 10-5 Grundfos Wärmetauscher / Heat exchanger  Technische Dimensions: Length / Width / High 1800 x 850 x 2153mm Gewicht / Weight 640kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Njdpfx Ahexlkg Aeksda On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), ef cooling LOK 30 air-oil cooler SN:0030, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Nsdpfoul In Rex Ahkjda

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0430.020 / 21143, type of input current: three-phase, power: 22.3 kW (30.32 HP), input current: 42 A, We are offering a refrigeration unit from ef cooling. This unit was used to cool a Bystronic laser cutting machine. Regular maintenance was always performed. The unit can also be used as a source of spare parts, so individual parts can also be purchased. Ndsdpfezdytisx Ahkja We have another identical unit in stock, so two of this type can be purchased.

Condition: excellent (used), J4 tunnel oven from year 2012, disassembled and ready for shipment. For more information, please send an email. Ndedpfx Ahew Elytekja

Condition: excellent (used), functionality: fully functional, total height: 2,175 mm, total length: 13,670 mm, total width: 2,050 mm, The CES CO2 cryogenic tunnel is a high-performance solution for rapid product freezing in industrial environments. Thanks to its use of carbon dioxide, this tunnel provides rapid, efficient cooling, ensuring that food quality and properties are preserved. In fact, it is designed to guarantee uniform freezing while reducing moisture loss. What's more, the CO2 CES cryogenic tunnel stands out for its ability to handle large volumes of product, making it an ideal choice for large-scale operations. What's more, it offers flexibility of use, adapting to a variety of product types while ensuring a continuous workflow. Thanks to its cutting-edge technology, it enhances productivity while reducing energy costs, optimizing freezing processes in the food industry. In short, this machine represents a reliable and efficient solution to the demands of industries requiring rapid freezing, while guaranteeing rigorous compliance with quality and safety standards. Technical specifications Cooling Njdpfx Aou Iu U Dehkeda Dimensions: 13670 x 2050 x 2175 mm (L x W x H) Usable dimensions: 11960 x 1201 (L x W)

Condition: good (used), Year of construction: 2010, HL Cooling HL155 Water chiller 2010, twin fan system, adjustable temperature controls, see plate for all spec, 3Ph Nedpfowxlmasx Ahksda

Condition: used, all stainless steel 3 tiers Njdpfxozwlqgj Ahkjda nett belt length ± 5.800 mm nett belt width ± 940 mm stainless steel mesh wire belt outside dimensions (l x w x h) : ± 7.200 x 1.400 x 2.900 mm + Evaporator "Goedhart B.V." Type LLK.s 411m² manufacturing number: PJV100282 Year of manufacture: 2010 Capacity: 135 dm³ Refrigerant: NH3 Weight: 770 kg, Working pressure: 22 bar Test pressure: 32 bar Overall dimensions including cooling panels and stainless steel door: 7.500 x 2.700 x 3.300 mm

Condition: used, Freshline freezer MP Type IQF 1220.15/3070 suitable for nitrogen all stainless steel product height: max. ± 100 mm capacity: ± 5.000 kg / h product load (kg/running meter): ± 13-14 kg / running meter 400/460V, 50/60Hz, 3PH+PE, 110A, 32kW Pneumatic: 1Nm3/h at 5-7barg Nodpfezwll Dox Ahkoda LIN pressure nitrogen 3barg net belt width ± 1.220 mm net belt length ± 16.800 mm dimensions (l x w x h) : ± 17.700 x 2.600 x 2.600 mm (max open) in very good condition

Condition: used, suitable for thermic oil heating (180 kW) Maximum baking temperature 220-250 °C adjustable temperature adjustable speed Minimum cooking time: 4 min Maximum cooking time: 60 min belt width 600 mm Nedpjzwdczefx Ahkoda canopy with electric hoists suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A dimensions (l x w x h) : ± 10.000 x 2.000 x 2.700 mm

Condition: used, suitable for nitrogen all stainless steel belt width ± 600 mm Ndedpfszv Rnhsx Ahkja nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm product height: max. ± 80 mm

Condition: used, net cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans Ndodpfezvwpfjx Ahkoa infeed conveyor outfeed conveyork washing system (conveyor) suitable for steam heating max. product height : ± 180 mm dimensions (l x w x h) : ± 14.600 x 2.400 x 4.400 mm adjustable speed 120 kW infeed height: ± 1.000 mm outfeed height: ± 1.000 mm cooking time min/max : 3-18 min mesh wire belt Simatic S7 Text display OP 17 electric power : 26 kW 400V

Condition: ready for operation (used), We have a BECK HV600 shrinktunnel available. This machine is ready and is working like new! Nedpfx Ashcdhlshkoda The measurements are in the pictures.

Condition: new, Year of construction: 2026, The CORMAK TSC710 planer knife sharpener is an efficient and precise machine designed for sharpening planer knives, wood chipper knives, shredder knives, and other machine knives used in the woodworking industry and manufacturing facilities. With the ability to sharpen knives up to 800 mm in length, this model is an excellent choice wherever accuracy, repeatability, and reliable operation are essential. The machine is designed for professional users who expect perfectly sharpened tools, reduced machine downtime, and full control over the sharpening process. Key Features Planer and machine knife sharpener – enables precise sharpening of knives used in planers, thicknessers, jointers, chippers, and shredders. Sharpening knives up to 800 mm – the large working range allows the machine to handle most knives used in woodworking workshops and manufacturing facilities. Efficient liquid cooling system – protects the cutting edge from overheating and helps maintain the material's properties during grinding. Precise grinding unit guidance – the motor and grinding assembly move along stable linear guides with linear bearings. Simultaneous sharpening of multiple knives – special clamping blocks allow up to 4 thin planer knives to be sharpened in a single cycle. Compact and rigid construction – the 65 kg machine provides excellent stability, reduces vibration, and improves operator comfort. Construction and Technology The CORMAK TSC710 is equipped with a grinding assembly that moves along linear guides. This solution ensures smooth and uniform movement of the grinding wheel along the entire length of the knife, resulting in high sharpening accuracy and repeatability. The integrated liquid cooling system effectively dissipates heat generated during grinding. This protects the cutting edge from overheating while helping the knife maintain its correct geometry and material properties. One of the key features of the TSC710 is its efficient cooling system. During operation, the coolant limits the heating of the cutting edge, which is particularly important when sharpening knives made of tool steel and HSS. Cooling helps achieve a high-quality ground surface, extend knife service life, and reduce the risk of material property degradation caused by excessive heat. The TSC710 can sharpen knives up to 800 mm in length, 150 mm in width, and 30 mm in thickness. Smooth height adjustment of the grinding wheel allows precise setting of the grinding parameters, while the manual feed along the linear guides gives the operator full control over the sharpening process. Standard Equipment CORMAK TSC710 knife sharpener Grinding wheel Integrated cooling system Coolant tray Clamping blocks for simultaneous sharpening of multiple knives Ndodpfx Aszwlvijhkea Clamping components Operating manual Technical Specifications Specification Value Motor power 1.1 kW Power supply 230 V Maximum knife sharpening length 800 mm Maximum knife width 150 mm Maximum knife thickness 30 mm Spindle speed 2,800 rpm Grinding wheel diameter 100 mm Grinding wheel height 51 mm Grinding wheel thickness 13 mm Cooling system Yes Feed type Manual, on linear guides Simultaneous knife sharpening Yes, up to 4 knives Machine dimensions 1170 × 465 × 610 mm Weight 65 kg

Condition: new, Year of construction: 2026, CORMAK TSC630 Planer Knife Sharpener is a precise and efficient machine designed for sharpening planer knives, chipper knives, shredder knives, and other machine blades used in woodworking, sawmills, and industrial production facilities. Thanks to its ability to sharpen knives up to 630 mm in length, this model is an excellent solution wherever accuracy, repeatability, and fast tool restoration are essential. Dull knives result in poorer machining quality, increased machine load, and unnecessary downtime. The CORMAK TSC630 quickly restores the perfect sharpness of machine knives, ensuring high-quality grinding results and full control over the sharpening process. Ndedpfjzwk D Ssx Ahkoa Main advantages of the machine Sharpening knives up to 630 mm – suitable for most standard planer knives and machine blades within this length range. Liquid cooling system – effectively removes heat generated during grinding, protecting the cutting edge from overheating. Adjustable sharpening angle 0–90° – allows precise adjustment according to the knife type and required cutting geometry. Smooth manual feed system – linear bearing guides ensure stable and precise movement of the grinding assembly. Adjustable clamps and stops – enable quick and repeatable positioning of the knife. Ability to sharpen several thin knives at once – stacking blocks allow simultaneous sharpening of planer knives with a thickness of 3 mm. Smooth grinding wheel height adjustment – allows accurate positioning of the grinding wheel relative to the sharpened knife. Collection tank with drain opening – enables collection and reuse of the coolant. Construction and technology The CORMAK TSC630 sharpener has been designed for users who require a stable, accurate, and convenient machine for daily knife sharpening operations. The grinding assembly moves along precision linear guides equipped with linear bearings, ensuring smooth movement of the grinding wheel across the entire length of the blade. This solution provides a uniform grinding process without the risk of uneven sharpening and allows full control over the sharpening operation, even when working with longer knives. Perfectly sharp knives without overheating the cutting edge Temperature control is one of the most important factors during sharpening. The integrated liquid cooling system effectively removes heat generated during grinding, protecting the material from overheating and loss of cutting properties. Thanks to the cooling system, sharpened knives maintain the correct geometry, retain sharpness for longer, and ensure high-quality performance after being installed back into the machine. Standard equipment CORMAK TSC630 knife sharpener Corundum grinding wheel Built-in cooling system Coolant collection tank with drain opening Blocks for simultaneous sharpening of several thin knives Adjustable clamps and stops Mounting elements 2 grinding wheels included 1 L of ES12 emulsifying oil User manual Technical specifications Parameter Value Motor power 1.1 kW Power supply 230 V Maximum knife length up to 630 mm Maximum knife width up to 150 mm Maximum knife thickness up to 30 mm Grinding wheel speed 2800 rpm Grinding wheel diameter / height 100 / 51 mm Grinding wheel thickness 13 mm Sharpening angle 0–90° Cooling system Yes Feed type Manual, with linear bearings Machine dimensions 1000 × 465 × 610 mm Weight 55 kg

Condition: used, Model CES/P-LT-LIN-8mx1.22-PODB-SH suitable for nitrogen all stainless steel belt width ± 1.220 mm nett belt length 8.000 mm Nodpfx Ahezvcqujkjda dimensions (l x w x h) : ± 9.300 x 2.100 x 2.300 mm 14 kW product height: max. ± 120 mm

Condition: used, FlowCook all stainless steel suitable for thermal oil heating (300kW) Nodpfx Ahszvbzfjkoda belt length ± 13.000 mm belt width ± 600 mm outfeed conveyor belt washing system electric hoists for the lid steam pressure : 4-8 bar outside dimensions (l x w x h) : ± 15.000 x 2.200 x 3.000 mm