Used Uv Curing Oven for sale (2,328)

Condition: used, Year of construction: 2022, Operational condition. 2 units available. Bodpowctn Hefx Abbowh Ask for additional information!

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Dual Chamber During Oven 1.700 x 1.400mm (2.40m2) Process area based on largest substrate; 4.1. Process area (minimal); 1.700 x 1.400mm (2.40m2) 4.2. Substrates are (non-) heat treated, (non-) TCO coated optical white (or standard) float glass sheets with straight or pencil edges and (non-) edge delete patterns (1) Bjdpjv T I Iqefx Abbjwh 4.3. Substrates are rectangular shaped (2) General Electrical diagram (see appendix 1) Main power supply voltage 3x400 ± 5% + earth, 50Hz ± 5% Control voltage 230Vac 50Hz and 24Vdc Main fuse 140A Motor power Circulation fan motor 2.2 kW (2 pcs.) Drive motor vertical transport 0.39 kW Drive motor horizontal transport 0.09kW 1.5.3 Heating system Heating Heating type Electric with closed tube elements Power 30 kW per room Overall, the system consists of two parts, viz: - The furnace consists of two chambers each with an air circulation fan and adjustable air inlet. - The conveying system consists of a trolley with vertical and horizontal movement. The oven is suitable for curing heat treatments under air atmosphere with cleanroom classification in the temperature range from 50ºC to 250ºC. One heat cycle per chamber can be programmed. The cart can place glass from the conveyer position into one of the two chambers where the products undergo a selected heat cycle. And then removed from the oven and placed back in the conveyer position.

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: GE-KEK-100L, Pre-treatment and Powder Coating Line with Curing Oven (1. Pre-treatment Cabin, 2. Powder Coating Booth, 3. Curing Oven) 1. Manual Chemical Pre-treatment Cabin – 1.6 × 1.6 × 2.2 m – 800 L • Cabin dimensions: 1,600 × 1,600 × 2,200 mm • Chemical tank: approx. 800 L • Pump/spraying unit: ST 84 HE • Heating elements: 2×6 kW (water temperature: 45–60 °C) • Motor: approx. 1.5 kW • Electrical connection: 3×380/220 V, IP68 protection • Manual spray operation, automated circulation, rinsing. Closed system ensures safe chemical handling • Spring-loaded nozzle technology – for pre-treatment directly prior to powder coating Condition: excellent, complete unit, EU-standard control panel, documented operation 2. Industrial Powder Coating Booth Dimensions (external): 1,850 × 1,600 × 2,600 mm • Extracted air: 3,000 m³/h • Motor: approx. 1.5 kW • Filter cartridges: 2 pcs + automatic cleaning • Electrical connection: 3 × 380 V/220 V, 50 Hz • Air velocity: 0.2–0.5 m/s • Max workpiece size (hanging): 250 mm × 1,000 mm • Spray opening: 1,100 × 1,100 mm Accessories: • Sheet metal construction with transparent panel • Extraction fan + silencer • Compressed air tank + preparation unit • Automatic filter cleaning, powder recycling container • EU-standard control cabinet, pneumatic system + air flow sensor Condition: • Good technical condition, well maintained • Complete documentation and fully operational system 3. Walk-in Industrial Curing Oven for Sale – 1.3 × 1.3 × 2.2 m – 200 °C We offer a professional walk-in curing oven for industrial use, in excellent technical condition! Main parameters: • Usable internal dimensions: 1,300 × 1,300 × 2,200 mm • Curing temperature: 180–200 °C • Curing time: 15–25 minutes Bjdpsygg Rnsfx Abbewh • Heating capacity: 2 × 12 kW (electric heating) • Circulated air volume: 1,250 m³/h • Exhausted air: 100 m³/h • Motor power: approx. 1.5 kW • Insulation thickness: 150 mm • Year of manufacture: 2013 Accessories: • Thermally insulated chamber structure with door • Air circulation fan unit • Electric heating elements • Horizontal separator panel • Heat sensor + overheat protection • EU-standard control panel • Air flow sensor • Metal frame Condition: • Regularly maintained, good technical condition • Complete documentation • Ready for immediate operation

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Bwedpfofz I Rxjx Abboh Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ Bwedpsfz Nd Iofx Abbsh 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ Bedofx Nfmjpfx Abbowh 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Bwodpfx Aofz U Nbjbboh Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Bsdpofzccnofx Abbswh Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Bwedpfofzb Rcox Abbeh Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: ready for operation (used), machine/vehicle number: 95 202 74, This listing includes a fully operational, complete DELO DELOLUX UV curing system, consisting of: DELOLUX pilot A4T control & power supply unit 2× DELOLUX 20/400 A2 LED area lamps (400 nm) Mounting brackets, integrated cooling, and all original high-quality cabling DELO is one of the world’s leading manufacturers of industrial UV curing systems used in electronics, optics, medical device assembly, precision bonding, and automated production lines. This system provides extremely high-intensity, uniform UV illumination over a large area, perfect for high-speed adhesive curing and automated processes requiring absolute stability and repeatability.  Included Components 1) DELOLUX pilot A4T Control & Power Unit Model: A4T Bwsdpfxex Emqgo Abboh Input Voltage: 100–240 V AC, 50/60 Hz Power Consumption: 1.45 kW Fuse: T16 A / 250 V User Interface: Large touchscreen display (Login, Admin/User profiles) Control Ports: PLC 1–4 (digital control inputs) Function: Central control, monitoring, and power delivery for LED heads 2) Two LED Heads – DELOLUX 20/400 A2 Wavelength: 400 nm Cooling: Air-cooled Illumination Area: 112 × 112 mm Perfect uniformity for industrial curing processes Both heads include mounting brackets + 280 cm cable each Technical Specifications UV LED Heads (each): Model: DELOLUX 20/400 A2 Wavelength: 400 nm Cooling: Air-cooled Illumination area: 112 mm × 112 mm Serial Numbers: included on the labels Cable length: 280 cm Control Unit (A4T): Model: DELOLUX pilot A4T Input: 100–240 V AC Power: 1.45 kW Fuse: T16A Port outputs: Up to 4 LED heads Power cable length: 180 cm Condition Fully working, tested with both LED heads Bright output, even intensity Cosmetically excellent No damage to connectors, filters, or LED arrays Perfect for: Industrial adhesive curing, electronics production, display manufacturing, PCB assembly, medical device fabrication, optical bonding, and automated UV curing stations. Cable Lengths (included): Power cable (A4T): 180 cm LED head cables: 280 cm each Thank you for considering our surplus machining and electrical items for purchase. These items have been in our company's stock for several years, but they are in functional condition. Due to the length of time they've been in storage, some of the items may show signs of aging or wear on the packaging, but the contents are in excellent condition. We want to be transparent about the condition of these items, so please note that the packaging may be slightly damaged, discolored, or have markings from storage. However, this does not affect the functionality of the items inside. We have inspected all of the items and can confirm that they are in functional condition. We will take great care in packaging and shipping your order to ensure that it arrives in the same condition as it was when it left our facility. If you have any questions about these items, please don't hesitate to contact us. Thank you for your interest!

Year of construction: 2001, condition: good (used), 1 used hardening furnace Manufacturer: Nabertherm, Type N 321 Serial Number: 160897, Year of manufacture: 2001, Max. temperature: 1,200°C, Connected load: 400V, 47 kW Internal dimensions: 750 x 1100 x 400 mm Usable volume: 320 liters Weight: approx. 1.6 t Dimensions: Bsdpfx Aoxpf I Nebbowh Length approx. 2 m, width approx. 1.5 m, height approx. 2 m,

Condition: used, UV-9 Oven Bwsdpex Tg Hwefx Abbjh 11 units available, year of manufacture 2022 and 2023. Configuration: 6726613 UV-9 Oven, 7262431 UV-9 Base model 7263582 Option, closed loop top 7262797 Inlet and outlet shutter option 7263074 Traffic control (board drop detection) 7263583 Board counter 7263584 Board jam detection (entry and exit) 7264524 Automatic width adjustment for conveyors Price from €19,000

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 Bjdpfsfy T Spsx Abbjwh 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: excellent (used), Handle UVALOC 400 Loctite 97039 Curing Chamber The UVALOC 400 curing chamber (LOCTITE 97039) is a surface jet curing system, developed for curing light-curing adhesives with UVA rays and visible light. It is suitable for manual curing of individual parts during the production process as well as for laboratories. The following is integrated in the device a control unit with integrated mains switch and operating hours counter a lamp housing with the burner reflector ignitor. In with UV protection box Features: Contains 400 W metal halide lamps Optimized for light emission in the UVA range Bodpetv H A Tjfx Abbswh Typical curing area 10 x 19 cm Expected service life of the UV lamp up to 1000 h The power supply unit can be detached from the lamp module and operated separately Adjustable lamp height for optimum irradiation With glass filter to avoid short-wave UVB/UVC emission Technical data: Mains connection 230 V AC ± 4%, 50 Hz Power consumption approx. 460 W Mains fuse 2 x 5 A, slow-blow Glass tube miniature fuse 5 x 20 mm Warm-up time of the UV lamp 3 minutes Lamp type 400 W high-pressure metal vapor lamp with base on both sides Lamp life approx. 1000 hours Intensity See section 5.1 Dimensions (width x height x depth): 220 mm 472 mm 300mm Ambient and operating temperature + 10 °C ... + 30 °C Storage temperature - 10 °C ... + 60 °C Weight ~ 11.5 kg Condition: gebraucht / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2025, condition: new, ⭐⭐⭐⭐⭐ (5.0) 58 ratings ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ shipping : 30-days delivery ✈️ ✅✅✅Energy class A+++✅✅✅ EXCL. VAT & SHIPPING* ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► Bwedsghf R Uopfx Abbeh ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Powder oven with gas or diesel heating - BOXLINE 15-3025 ✔️Internal dimensions : 1500*3000*2100 ✔️External dimensions: 1780*4000*2500 ✔️ Volume: 9 m³ ✔️ Heating capacity: 90,300 Kcal/h ✔️ Circulating air flow rate (fan) : 6,800 [M³/H] ✔️ Power of the circulating air fan: 2.2 [KW/H] ✔️ Digital heat control Temperature continuously adjustable up to 220°C ✔️ Sandwich panels Inside: 1mm galvanized steel, Outside: 1mm powder-coated steel ✔️ Adjustable air outlet openings and air circulation channels for homogeneous air distribution ✔️ Adjustable curing temperature, curing time and exhaust fan function ✔️ A beep will sound at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 140mm Rockwool. Walls: 140mm (50mm rockwool and 100mm fiberglass) ✔️ Type of heating: Indirect heating ✳️Functional principle✳️ This oven is intended for heating powder coated parts. The paint polymerizes at a temperature of around 200ºC (depending on the type of paint used) and forms a film on the surface of the metal. The temperature control in the oven is carried out by the control unit, which receives a signal from the temperature sensor in the oven. ✳️Oven Body✳️ The body of the polymerization furnace consists of heat-insulating panels that are inserted upright into each other and glued together with a heat-resistant sealant. Conveyor distances to the oven door channels can be left if desired. Optionally, it can be made with pivoting double doors. ✳️Heat exchanger✳️ The heat exchanger is installed in the side part of the polymerization furnace body. The internal structure and materials of the heat exchanger are designed in such a way that the temperature in the furnace can be increased to 230 ° C, and the temperature difference at various points is the allowable ones Heat exchanger manufactured from 3 mm. AISI310 Quality STAINLESS STEEL ✳️Circulation fan✳️ Air circulation in the oven is carried out by four circulation fans with insulated chassis. Blade air propellers are often used in circulation fans. ✳️Digital fully electronic temperature controller✳️ ✳️Exhaust fan✳️ It is used to suck in and blow out the gases produced during the polymerisation of the powder in the furnace. If necessary, the exhaust fan can work continuously after a certain period of time or turn on automatically from time to time. ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️

Condition: new, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4 weeks after receipt of payment! ✅✅✅Energy class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - MATOVENB-151830 ✔️ Internal dimensions: 3000 mm L * 1500 mm W * 1800 mm H ✔️ Electric heating output: 42 kW/h ✔️ Fan: 3,000 m3/h 80 mm SS ✔️ Recirculation fan output: 1.5 kW/h ✔️ Total 45 kW/h +- 10% ✔️ Digital heat control with continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.2 mm galvanized steel, outside: 1.2 mm powder-coated steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 150 mm (50 mm rock wool and 100 mm fiberglass) 🔥 MATOVENB-151830 – Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastics processing, or other thermal processes – the MATOVENB-151830 is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Can be used with a mobile workpiece trolley • Ground-level rail guide – convenient and safe access • Optionally with a shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ Bwjdpfx Aswc E Hzjbbeh ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control the temperature profile and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensor to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume extraction via automatic venting _____ ⚡ Customized energy and heating system 🔌 Selectable heating systems: Gas, diesel, electric, or hybrid (two combined heating modes) (optional) 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch after batch. This saves you time and avoids errors. _____ 📢 And the best part: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for personalized advice! _____ ☀️ 2-YEAR WARRANTY ☀️

Condition: new, Year of construction: 2025, functionality: fully functional, temperature: 220 °C, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, Powder ovens in various sizes 1 Internal dimensions length 1500 - 6,500 [mm] 2 Internal dimensions width 1700 - 1,900 [mm] 3 Internal dimension height 2,000 [mm] 4 Substructure Steel profile 5 Walls 1 mm galvanized sheet metal on both sides, RAL on the outside 6 Insulation walls, ceiling rock wool 150mm 75Kg/m² 7 Oven floor receives 2 entry rails for rack trolleys (optionally with conveyor technology) 8 Temperature 220°C Bwedpfefhv Tlox Abboh 9 Fans 1 - 2 pcs. 2600 - 15,000 [m³/h] 10 Electric motors 1 - 2 pcs. 1.1 - 6 [kW] , 1450 [rpm], 3 F, 50 [Hz] 11 Thermal output 14 - 99 [kW] 12 Sash or sliding doors on one or both sides 2 - 4 insulated with rock wool 150mm 75Kg/m² Indirect heating via thermoblock 13 Thermoblock stainless steel INOX AISI 316 Heating electric or gas heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection

Year of construction: 1999, condition: used, machine/vehicle number: 99116961, Technical specifications: - Rated / continuous temperature up to 1150 °C - Infinitely variable temperature control - Temperature display Bodpfx Absx E Ubgsbswh - Drive: 400 V / 5 kW - Internal dimensions approx.: W 160 x H 160 x D 360 mm - Required space approx.: W 850 x H 700 x D 600 mm - Weight approx.: 140 kg

Condition: like new (used), functionality: fully functional, machine/vehicle number: D362931, Year of construction: 2023, total length: 500 mm, total height: 400 mm, total width: 510 mm, overall weight: 80 kg, input voltage: 220 V, power: 0.3 kW (0.41 HP), The DWS UV Curing Unit XL is a professional large-format post-curing system, specifically recommended by the Italian manufacturer DWS for their SLA 3D printers. This XL curing unit is equipped with a high-performance UV light source to ensure consistent and reliable heat and light distribution. Thanks to its high precision and intensity, it can cure printed objects fully automatically in just a few minutes. In addition to the XL model, DWS also offers the S2 and M curing units, which differ in size and curing capacity. The DWS UV Curing Unit XL provides an impressive curing volume specifically matched to the build platform dimensions of the DWS XPRO Series printers. The unit is equipped with a timer that allows users to set the exact curing duration (up to 180 minutes). It also features user-friendly, intuitive controls and an ergonomic design. Safety is prioritized through features such as an intelligent door lock system and forced internal ventilation, enhancing operator comfort and security. Designed for professional SLA 3D printing workflows, the DWS UV Curing Unit XL serves as a crucial final step in the manufacturing process. It completes the secondary curing of models produced on DWS SLA printers. Even if models are perfectly shaped, they still require additional UV exposure for complete polymerization and structural stabilization. Post-curing improves not only the visual quality and smoothness of the model but, more importantly, its durability and resistance. Curing Volume The DWS UV Curing Unit XL offers a generous curing volume of 19.7 x 15.7 x 20 in (500 x 400 x 510 mm), which can accommodate the entire build platform of DWS printers like the XPRO S, XPRO SL, XPRO Q, and XPRO QL, including their HR versions. Controls The XL curing unit features straightforward and convenient controls for seamless operation. Activation is via a standard on/off button. An integrated 2.4” OLED display enables precise curing time setting—up to 180 minutes—ideal for processing large batches of SLA 3D printed components. Design The DWS UV Curing Unit XL features a sturdy white enclosure with two doors fitted with pink-tinted transparent windows. Its robust construction and ergonomic design make it suitable for a wide range of professional applications, such as prototyping, end-use part production, jewelry, digital dentistry, automotive, aerospace, and more. The device measures 30 x 27.8 x 31.8 in (761 x 705 x 806.5 mm) and has a weight of approximately 172 lbs (78 kg). Price The DWS UV Curing Unit XL is priced at $21,490.00, justified by its large curing volume, advanced features, and overall efficiency. Technical data summary: - Curing volume: 500 x 400 x 510 mm - Timer setting: 0 to 180 minutes - Internal ventilation: Forced ventilation - Display: 2.4” OLED - Inner dimensions: 670 x 660 x 590 mm - Manufacturer: DWS (Italy) - Safe door opening: Yes - Light source: UV LED - Outer dimensions: 761 x 705 x 806.5 mm Bsdjx Ehg Hepfx Abbewh - Power consumption: 300W - Power supply: 100–240V / 50–60 Hz - Weight: 78 kg

Year of construction: 1993, condition: good (used), machine/vehicle number: 86317, Offer 25335 Technical specifications: - Nominal / continuous temperature, stepless: up to 1280 °C - Three-sided heating (bottom and sides) - Temperature control via NABERTHERM Controller C 19 - Drive: 400 V / 5.5 kW - Internal dimensions approx.: W 250 x H 140 x D 350 mm - Usable volume: 11 L - Base frame: W 900 x H 900 x D 950 mm - Required space approx.: W 800 x H 600 x D 750 mm Bwedpjx D U Eyofx Abbjh - Weight approx.: 80 kg

Condition: not inspected (used), functionality: unexamined, overall weight: 400 kg, inner dimension height: 230 mm, inner dimension length: 600 mm, inner dimension width: 300 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Internal dimensions: 600 x 300 x 230 mm MACHINE DETAILS Bwodpfx Asxqnzbsbbeh Dimensions & Weight Dimensions (L x W x H): 900 x 900 x 1,700 mm Weight: 400 kg

Year of construction: 2002, condition: not inspected (used), functionality: unexamined, overall weight: 150 kg, inner dimension height: 140 mm, inner dimension length: 320 mm, inner dimension width: 250 mm, temperature: 1,100 °C, machine/vehicle number: 168493, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business liquidation. Submitting a bid obligates timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Max. temperature: 1,100 °C Internal dimensions: 320 x 250 x 140 mm MACHINE DETAILS Electrical data Operating voltage: 230 V Frequency: 50 / 60 Hz Rated current: 13 A Connected load: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 600 x 550 x 1,500 mm Weight: 150 kg Bwjdoxqny Dspfx Abbsh

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, temperature: 250 °C, power: 30 kW (40.79 HP), Curing oven with two chambers (one programmable heat cycle per chamber)! Equipped with conveyor belt and cleanroom classification! Bodjxurt Ajpfx Abbowh TECHNICAL DETAILS Process area (minimum): 1,700 x 1,400 mm (2.40 m²) MACHINE DETAILS Electrical Data Main power supply: 3x400 V ±5%, 50 Hz ±5% Control voltage: 230 Vac 50 Hz and 24 Vdc Main fuse: 140 A Motor Output Circulating fan motor: 2.2 kW (2 units) Drive motor for vertical transport: 0.39 kW Drive motor for horizontal transport: 0.09 kW Heating Heating type: Electric with sealed tubular elements Output: 30 kW per chamber Temperature range: 50 °C to 250 °C EQUIPMENT Conveyor system Cleanroom classification

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: #1913, Fully functional infrared curing oven, with automated conveyor available. 40' / 12m Infra red powder curing oven with zone control. 6 heating zones with 2 height levels; total 186 heating elements. PLC with 7" Color touchscreen. 8 cooling blowers 1-2,000 cfm exhaust. Bwedpfoxr T Ipjx Abbjh Conforms to UL STD 499 & UL STD 508A. 480V 3ph. Webb type conveyor from Frost France up to 1.83m / min speed, and load up to 200kg.

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 3200 0088, overall weight: 2,000 kg, total length: 7,300 mm, total width: 1,100 mm, total height: 2,000 mm, input voltage: 400 V, input current: 125 A, type of input current: three-phase, input frequency: 50 Hz, cooling capacity: 30 kW (40.79 HP), operating speed: 83 mm/s, Manufacturer IBT.InfraBioTech GmbH Art.-No. 3200 0088 Technical Data Condition: As new; little used from test series Functionality: Fully functional Year of manufacture: 2018 Connected load: 58 kW Cooling capacity, water connection on-site: 30 kW Conveyor belt length: 7,000 mm Conveyor belt width: 310 mm Infeed height: 55 mm Infeed width: 308 mm TECHNICAL DETAILS Application: Conveyor oven for curing in film bonding technology Component temperature: max. 100°C Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm Overall height without control cabinet: 2,000 mm Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm Base frame made of stainless steel profile tube, height adjustable: ± 30 mm Conveying system Vacuum conveyor belt made of silicone, belt 310 mm wide Transport speed: max. 5 m/min Conveyor belt height: 950 mm ± 30 mm Belt infeed/outfeed openings (WxH): 308 x 35 mm Free area infeed: approx. 750 mm Free area outfeed: approx. 750 mm Conveyor belt operation: Continuous operation, adjustable up to max. 5 m/min, tracking regulation with light barrier safety system at infeed and outfeed. Loading and unloading are performed manually. Intended use The curing oven is a belt system for continuous operation with a feed speed of max. 5 m/min. Open areas at the infeed and outfeed sections are provided for loading and unloading components. The enclosed heating section houses 6 IR modules (height adjustable). The maximum component temperature is 100°C and serves to heat solvent-free adhesive between composite film layers. The return side of the belt, the rear sides of the IR modules, and the space above the heating modules are water-cooled. Components are held onto the conveyor belt by vacuum. The control cabinet is located separately from the machine outside the cleanroom. Bedpfewnm Uksx Abbewh The system operates in a cleanroom according to EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The equipment is exclusively for the warming of film composites. Features - 6 adjustable infrared heating modules, each with 6 infrared emitters - 6 pyrometers for precise temperature control - PU conveyor belt for efficient material flow - Integrated control and regulation system - Height-adjustable stainless steel base frame - Vacuum conveyor belt - Cooling water distribution in the base frame (G1") - Water cooling for the belt return section and rear sides of IR modules - Mechanically lockable service doors - Operator panel mounted at the infeed on the left side - Control cabinet cooling unit, water connection on-site History This oven was intended for use in a cleanroom environment and was only used briefly for a test series. The oven was used for curing solvent-free adhesives between composite film layers.