Used Washing Chamber for sale (3,716)

Condition: used, Year of construction: 2015, heating capacity: 54 kW (73.42 HP), power: 78 kW (106.05 HP), Chamber-type washing system Manufacturer: SUGINO ZIPPEL Type: ZD-4.000-RAST Year of manufacture: 2015 Technical data: - Dimensions (length/width/height): approx. 4020 x 2460 x 2600 mm - Total power: 78 kW - Filling capacity: 1,200 l - Load capacity: max. 0.5 - Bath temperature: 65 °C - Heating capacity: 54 kW Cleaning tank: - Volume: 600 l Crodpfxjzq Hlxo Aiioi - Pump: 3 bar - Heating: 9 x 3 kW - Dosing pump: 10 bar Rinsing tank: - Volume: 600 l - Pump: 2 bar - Heating: 3 x 9 kW - Cascade pump: 0.28 bar Drying: Blower: 2 x 5.5 kW Vapor extraction: 16 kW Machine designation: Chamber-type washing system Pump: 2 bar Vapor extraction: 16 kW Volume: 600 l In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Year of construction: 2020, condition: ready for operation (used), A Guggenberger chamber washing machine is available. Number of wash carts: 8, wash cart capacity: 8 pallets, pallet dimensions X/Y/Z: 1200mm/800mm/160mm, spray pump power: 11kW, fan capacity: 4000m³/h, operating hours: approx. 4350h. Including rotary nozzles, spin drying unit, tilting device, exhaust fan with steam damper, condensate separator, gloss drying, tank heating with booster, compact belt filter system, oil skimmer and steam condensator. Documentation available. An on-site inspection is possible. Codpfxozlt N Ho Aiijri

Condition: used, Year of construction: 2006, Technical details: voltage: 380 V number of stations: 1 Stück total power requirement: ca. 2,0 kW weight of the machine approx.: 160 kg dimensions of machine: 0,85x0,85x1,0 m Vibratiory bowl feeder Csdpeu Nu Imjfx Aiijri Washing unit (vibration technique) with heating: - applicable for cleaning of small parts - drum size 300mm, height 150mm - ejection automatically via screw guide - tank:560x460x280mm, filling approx. 60 liter, with filling display - equipped with rotary waste separator - table: 800x600mm, table height 640mm, catching basin 750x550mm *

Condition: used, Year of construction: 1999, Technical details: pass through height: 2000 mm tank capacity: 800 l Heating: 45 KW Codpfx Aijymc Txsieri cycle time: - sec Heating capacity: 45 kW container volume: 800 l electrics - voltage/frequency: 400/50 V/Hz lifting capacity: 2000 kg temperature range: max. 65 °C total power requirement: 70 KW daylight opening: 2000 mm space requirements of the machine approx.: 3.8 x 3,3 m dimensions of the machine approx. HxWxD: 3,1 x 3,3 x 3,72 m internal dimension: 1,8 x 1,0 x 1,0 m *

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: 08021, The KMPN 100Z is an industrial, spray-immersion chamber washing machine with manual loading, manufactured by the Polish company EKO-PIL. It is a specialized device designed for degreasing and washing parts in industrial and painting processes. Washing machine dimensions [mm]: 1600x1100x1600 Basket dimensions [mm]: 615x430x280 Load weight: 70 kg Net/gross device weight: 700/1300 Washing temperature [°C]: 20-70 Washing tank capacity: 360 l Rinsing tank capacity: 210 l Gear motor: 0.12 kW Washing pump motor Rinsing pump motor Drying fan: 0.64 kW Cooling fan: 0.2 kW Installed power: 33 kW Csdpfx Ajz Hylhoiieri Drying heater power Washing liquid heater power Rinsing liquid heater power Air pressure: 6 bar Complete documentation included.

Condition: like new (used), Year of construction: 2020, Equipment: documentation/manual, BRINOX BWS 912 – Pharma-GMP Pallet Washing System – Year of Construction 2020 – Like New For sale is a high-quality pharmaceutical pallet washing system from BRINOX Process Systems, model BWS 912, year of construction 2020. The system has been used very little and is in excellent, almost new condition with minimal signs of wear. It was specifically developed for the automated cleaning, rinsing, drying, and cooling of plastic pallets under high pharmaceutical hygiene requirements. Crsdpfx Ae Afmr Esiiji The machine is manufactured in high-quality stainless steel and features a modern SCADA control system with recipe-controlled cleaning programs. Technical Data Manufacturer: BRINOX d.o.o., Slovenia Model: BWS 912 Year of Construction: 2020 Serial Number: 1003187 Project Number: B-0001187 Condition: Like New, barely used Chamber internal dimensions: approx. 900 × 1,200 × 1,200 mm Maximum chamber load: approx. 150 kg Drying temperature: 80–120 °C Electrical connection: 400 V / 50 Hz Connected power: 39 kW Rated current: 59 A Protection class: IP54 Compressed air supply: 6 bar Sound level: below 85 dB(A) Water connection: DN25, 2–6 bar Exhaust connection: DN150 Cleaning and Drying System Fully automatic, recipe-controlled washing programs Rotating spray arms and special nozzles Integrated cleaning agent dosing Automatic rinsing and post-rinsing processes Integrated hot air drying Automatic cooling phase Heat exchanger for temperature control of the process air Cleaning rack for up to 4 plastic pallets Pallet format: 1,195 × 795 × 160 mm Control and Automation Siemens IFP 1500 multi-touch control panel SCADA process visualization Automatic and manual operating modes Recipe management and process reports User management and access control Audit trail and electronic signature functions Alarm management and process monitoring The control concept was developed in accordance with GAMP 5 and FDA 21 CFR Part 11. Equipment and Scope of Delivery Stainless steel washing and drying chamber Automatic sliding door with inflatable door seal Special pallet cleaning rack Stainless steel transport trolley Washing pumps and dosing system Heating, drying, and ventilation components Control and operating unit Associated pipelines and stainless steel components Technical documentation Extensive manufacturer documentation is available: Factory Acceptance Test (FAT) Operating and maintenance manuals HMI and SCADA user manual Maintenance plans and checklists Technical drawings and layout plans Electrical and pneumatic documentation Spare parts lists and material certificates Cleaning and loading instructions Testing and deviation protocols Condition and Availability The system was manufactured in 2020 and has been used very rarely. Due to the short operating time and the excellent condition, it can be classified as like new. The machine is currently disassembled and stored. An inspection is possible by appointment. Location: 42699 Solingen, Germany Price: Upon request We will gladly provide further information and technical documents. Subject to prior sale.

Year of construction: 2015, condition: good (used), For Sale: Nawi Stainless Steel Bin Washing Machine Make: Nawi Year of Manufacture: 2015 Specifications: Csdjyiyxkopfx Aiiori - Completely stainless steel - Steam heated - Equipped with infeed conveyor belt, width 1100 mm - Tilting device with infeed guide - Discharge screening system - Central control cabinet with touchscreen operation - Wash chamber dimensions: 2500x1700x1300 mm - Infeed + outfeed If you have any questions or comments, please feel free to contact us. Price includes disassembly Loading is included. Transport by arrangement Inspection possible on site. Kind regards, Leo Holland

Condition: used, Bous 3-chamber spray cleaning system (direct degreasing) System: 3 separate washing chambers (ideal for washing/rinsing/drying in a single cycle) Chamber size (W x H x D): 500 x 300 x 1,000 mm (perfect for long, curved workpieces) Equipment: Integrated thermostat for precise bath temperature control Crodpfx Aiezz H Iueisi Control: Siemens PLC with Siemens SIMATIC operator panel Machine has already been professionally disassembled and is ready for loading onto a pallet. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More new and used items can be found in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Timber drying 3 chamber ensemble (fully functioning, used). Parameters: - length: 12,9 m - width: 8,8 m - total height: 5,2 m / usable height: 4,1 m Crsdpfx Aszg Iw Isiiji Hot water 90°C More technical details available on demand. On site inspection and testing are possible.

Year of construction: 2011, condition: used, Intervac GmbH Mobile Double Chamber Vacuum Machine Type: INV 11/11 Year of construction: 2011 230/400 V, 50 Hz, 2.5 kW Weight: 355 kg Seal length: (2x) 620 mm Dimensions chamber: (2x) 600 mm x 670 mm Credpfjym U Syox Aiiei Total dimensions: 1550 mm x 970 mm x 1220 mm.

Condition: used, functionality: fully functional, Ultrasonic washing system, make Branson Type: EVD Power: 400 V / 30 A Functionality: The vacuum chamber is loaded with workpiece carriers measuring 50 × 30 × 20 cm. The chamber is then flooded with detergent and ultrasonic cleaning takes place. Crsdpfx Aiew Evnzjiji After the cleaning phase, the chamber is evacuated. The next step involves steam treatment, followed by another vacuum process. The result is grease-free and dry products.

Year of construction: 2025, condition: new, DOLFİN- VDL series Drum (Spiral) parts washing machines are used particularly for the purpose of cleaning small parts that are manufactured in large quantities and in bulk. The materials that are poured from the inlet part of the spiral drum in the device are directed towards the outlet part of the drum with the spirals inside the drum. While the drum moves in its own axis according to the set rotation speed, it subjects its parts to, respectively, washing (degreasing), rinsing, passivation and drying processes (varies per the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively within a single device. Full penetration is ensured by pressurized spraying and dipping effects in each section. Cjdpfx Ajv S Dk Sjiiori It is a very functional model of us that is used particularly for washing the bolts, nuts, washers, or such small parts, fittings, nipples, couplers and fittings that are processed in CNC and automated machines in high quantities. Regardless of the metal type of the parts to be washed, they are fully compatible with steel, brass, aluminum copper or stainless steel materials. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device operates continuously in accordance with the values of the washing parameters that have been entered from the control panel before operation. Parts that come out of production in bulk can be loaded into our device in 3 different manners. 1. With Vibrating Loading Chamber, 2.With Lift Conveyor, 3. By coupling to our Customer's existing system, Do not hesitate to contact for more information. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: Serial No.57/19, total length: 9,370 mm, total width: 2,900 mm, total height: 3,890 mm, overall weight: 4,490 kg, input current: 83 A, input frequency: 60 Hz, type of input current: AC, input voltage: 400 V, power: 50 kW (67.98 HP), workpiece weight (max.): 300 kg, We offer this used Neptun MASTER WAVE HP 2800 glass washing machine, manufactured in 2019. Wave HP 2862-80 HD Neptun’s heavy-duty vertical glass washer is designed for intensive use, with corrosion-resistant components and extensive use of AISI 304 stainless steel. It handles glass up to 80 mm thick and 300 kg per linear metre, including float, acid-edged, coloured, printed and pyrolytic glass. Inlet conveyor The 3,200 mm inlet conveyor has motorised rubber rollers, bevel-gear transmission and stainless-steel shafts. Sensors detect glass thickness and dimensions for PLC control. Its independent drive pauses incoming sheets during thickness changes until the machine is clear and adjusted. A foot pedal allows heavy sheets to be loaded while the conveyor is stopped and the rest of the machine continues running. Prewashing and washing A separate 400 mm prewashing module isolates prewash water from the main wash. Without a closed-circuit tank and pump, water consumption is 1,200–2,400 l/h. Three washing circuits use three pairs of 160 mm brushes with 0.30 mm bristles. High-density front brushes have inverter-controlled speed. Separate overhead motors drive front and rear brushes. Each circuit includes a 900 µm inlet filter, a 300 or 150 µm cartridge filter, a stainless-steel immersion pump and a drain valve. The first two circuits have independently controlled heating up to 50°C. A separate rinsing circuit sprays both glass faces. Water management Cedpfx Aij Ah Hgzoiori Water flows from the final circuit towards the first tank. Specified water limits are conductivity below 150 µS, salts below 80 mg/l, chlorides below 30 mg/l, hardness below 6°f and no iron. Demineralisation is required where these limits are not met or for insulating-glass production. Programmable preheating and automatic tank draining/refilling prepare the machine for the next shift. Rinse-tank conductivity control regulates demineralised-water input. Flowmeters display circuit flow and trigger cleaning alarms for filters or nozzles. Drying and energy saving The sound-insulated drying section uses one set of air knives, automatically positioned to suit glass thickness. Belt transport avoids roller contact after rinsing. SmartSpeed sets separate speeds for washing/drying and final trailing-edge drying. Stated fixed-speed performance applies to glass up to 10 mm without holes or notches; thicker glass or glass with holes or notches may require slower drying. Ecosave® automatically reduces drying airflow and energy demand when glass is absent. The source quotes savings of up to 41%, with a separate Ecosave Full example claiming 60% under the specified glass-size and spacing conditions. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), For sale: timber drying kiln with 3 plus 3 chambers. In very good condition. Credpfjy R Tdwsx Aiioi

Condition: used, Webomatic Mobile Double Chamber Vacuum Packer Type: CD 120-PR Serial number: 5710JL525 400 V, 3 Ph, 50 Hz, 5.0 A, 2.2 kW Seal length: (2x) 640 mm Dimensions chamber: (2x) 650 mm x 570 mm Busch vacuum pump Crodpfxoym U Ino Aiisi Total dimensions: 1420 mm x 840 mm x 1060 mm.

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Upper part: 40° slope - Lower part: 2% slope. DN 600 hatch with hinged cover at the top. stainless steel pressure-vacuum valve Csdpjvlpctsfx Aiijri At the bottom, a DN400 hatch with a hinged cover a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Above 2 coils, exchange surface 2.33 m2, PS 2 bar A device for moving grounds, test valve Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Liquid level gauge 555x432 rectangular hatch DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing. The tanks are dismantled and ready for delivery.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 7 kW (9.52 HP), input current: 16 A, input frequency: 380 Hz, temperature: 70 °C, overall weight: 2,000 kg, fuel type: electric, Equipment: documentation/manual, Selling an Incoplan Dry 6, manufactured in 2018. 7 kW electrical output. 8 m chimney. Inverter for wind speed regulation. 2000-liter hot water storage tank. 100 kW wood-fired boiler. Total price: 25,000 EUR. Crodpfx Aj Ah Ikyjiiji Tel: 00 36 70 619 08 06 (Viber, Whatsapp)

Condition: used, Year of construction: 2017, machine/vehicle number: 930048019, power: 32.8 kW (44.60 HP), input voltage: 380 V, total length: 2,878 mm, total width: 1,441 mm, total height: 2,682 mm, overall weight: 1,797 kg, number of chambers: 4, number of shelf rows: 4, control type: manual, fuel type: electric, BONGARD ORION Series Electric power 4 openings on 4 baking levels 1 baking path per level Deck dimensions 800x1800mm Integrated loading elevator Total baking area 5.8 m² Year 2017 Electrical power 32.8 kW Power supply 400 V Serial No. 930048019 Electrical protection 80 A Independent ERGOCOM control per level Refractory soles, 20 mm thick Stainless steel electric heating elements Heating element protection in the arch Independent steam generator per level Individual water dosing per level Steam injection from the rear Anti-splatter steam diffuser Internal chamber lighting Removable glass doors Crodpfx As Ahym Usiisi Brushed stainless steel facade External dimensions 1441x2878x2682 mm Weight 1797 kg Used electric deck oven, 4 openings, BONGARD ORION EvO E801/4-180 – 5.8 m² baking area General description The used electric deck oven with 4 openings, BONGARD ORION EvO E801/4-180, is intended for bakeries and baking-pastry workshops seeking baking on fixed decks. This model, also referenced as 801/4.180 in the manufacturer's documentation, has 4 baking levels, with a baking path of 800 mm in width and a deck depth of 1,800 mm. Its total baking area of 5.8 m² allows for organizing batches on multiple levels. Designed for bread and viennoiserie production, this electric oven combines refractory decks, heating elements, and independent steam generation per level.

Condition: new, max. tool diameter 400 mm 0 180 mm operating pressure 2 bar ROTATHERM chamber washing systems are used in all areas of industry and Craftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used. The parts are cleaned like in a dishwasher. Inserted into one Wire mesh basket they are in the closed device with a hot Lye shower washed from all sides. The machine will be selected after the Temperature and washing time set in operation. A centrifugal pump promotes the Washing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive) After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting the the pump is automatically put out of operation. ROTATHERM chamber washing systems are available in various sizes and at short notice Designs are available and can be requested on special claims be modified. As a rule, water-based cleaners are used deployed. But solvents are also used in ours cleaning machines. If necessary, the systems can be ex-protected version are delivered. Technical details EMSA ROTATHERM Mini: ----- Basket diameter: 400 mm Usable height: 180 mm Load capacity: 50kg Spray pressure without / with filter: 1.5 / 2.3 bar Circulation volume: 2.5 m³/h Tank capacity: 35 l Heating power: 2 kW Connected load: 2.5 kW Voltage: 220/230V Frequency: 50Hz Dimensions ----- Depth: 530mm Width: 650mm Height: 630mm Weight: 48kg ----- Price of the basic machine in the above design: On request! ----- Accesories: ----- Order No.: 1.521 Raised lid/max. Tool length 310 mm Order No.: 1.522 HSK 63 F tool holder for changing with basket Order No.: 1.523 HSK 63 E tool holder for changing with basket Order No.: 1.524 Tool holder for Weinig Powermat to change with basket Order number: 2.006 small parts basket, Order number: 1.504 filter system (0.08m²), Order number: 1.510 pressure gauge, Crsdpfxjyrtyts Aiiji Order No.: 1.511 Electromotive basket drive, Order number: 1.512 mobile frame, Order number: 1,513 rolls, Order number: 1.514 suction device, Order number: 1.516 oil separator / belt skimmer, Order number: 1.518 system completely in stainless steel, Order number: 1.519 nozzles in stainless steel, ----- Price on request The ROTAHTERM tool washing machine is also available in larger versions Standard, Maxi and XL available. All devices are also available in special voltages. Surcharge on request. When ordering accessories, the specified technical data and possibly the delivery time! The values ??given are guide values. Construction changes reserved. Delivery time: short term and after Agreement. All prices ex works plus packaging, transport, insurance and legal VAT. (technical information according to the manufacturer - without guarantee!)

Year of construction: 1979, condition: used, Equipment: - 1 material inlet - 1 steel support platform with material collection trough - 2 washing units (each with 1 squeezing unit) - 1 Infakta (fleet order) - 1 squeezing unit - 1 damping unit (with roller bed - 600 m) - 4 washing units (Benninger Extracta) - (each with 1 squeezing unit) - 1 material collection trough - 1 docking station - 1 preparation station with 2 large dosing pumps (year of manufacture: 2022/2025) - 1 process automation system (year of manufacture: 2001) Crodpj Ahwn Sjfx Aiioi - 1 control cabinet (CPU in the PLC control system, 2024) Working width: 2000 mm

Condition: excellent (used), With acid-resistant section, with high pressure nozzles, equipped with a conveyor Overall Size: 9,5 x 1,15 x 1,9 m Opening size: 530 x 250 mm Chemical tank (heated): 0,5m³ Rinse tank (heated): 0,3 m³ Credpfjt Ity Dex Aiiji Drying fans: 12db Voltage: 380 V

Condition: excellent (used), Year of construction: 2012, operating hours: 37,984 h, functionality: fully functional, machine/vehicle number: 30-2626/01WM4513c.132, total length: 6,698 mm, total width: 2,730 mm, total height: 3,008 mm, overall weight: 4,500 kg, input current: 95 A, feed length X-axis: 2,500 mm, feed length Y-axis: 1,300 mm, input frequency: 50 Hz, type of input current: three-phase, input voltage: 415 V, working height: 925 mm, power: 58 kW (78.86 HP), feed rate X-axis: 18 m/min, pressure: 8 bar, rotational speed (max.): 30 rpm, travel distance X-axis: 6,698 mm, year of last overhaul: 2025, operating pressure: 8 bar, final pressure: 8 bar, protection type (IP code): IP00, volume flow: 10 m³/h, type of cooling: air, number of rollers: 3, Equipment: rotational speed infinitely variable, We offer this very good BENTELER 30-2626 Benteler Glass wash, year of construction 2012. Credpfx Asz Rztvoiiji Operating voltage: 415 V Phases: 3 Frequency: 50 Hz Connected load: 50 kW Nominal current: 55 A Maximum current limited: 87 A Control voltage AC: 125 V Control voltage DC: 24 V Year of manufacture: 2012 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: refurbished (used), Year of construction: 2025, 2 × KC 1/65H Drying Chambers + Boiler House Complete industrial timber drying facility consisting of two KC 1/65H drying chambers and a steel-frame boiler house building designed to accommodate the heating equipment for the drying process. The boiler house structure has dimensions of approximately 9.3 × 10.6 m and is constructed from steel columns, truss roof girders and insulated sandwich panels. The sale includes: 2 × KC 1/65H timber drying chambers Capacity approx. 88 m³ of timber per chamber RSU control units Transfer mechanism Mechanical and electrical kiln equipment New kiln roofs Steel boiler house building with insulated sandwich panel cladding Supporting structural steelwork and roof construction The drying chambers operate with a hot-water heating system (90/80°C), feature five reversible fans per chamber, and are suitable for drying sawn timber, hardwoods and softwoods. Credpfx Aio Ah Sxuoisi Suitable for sawmills, timber processors and wood-product manufacturers looking for a complete industrial drying solution with its own boiler facility.

Condition: excellent (used), functionality: fully functional, Good working condition washing line with Weima shredder WLK1500 and Rotajet dryer and 2 sink float tanks Credpfoz Azz Esx Aiiei Output capacity 750kg p/h

Year of construction: 2010, condition: good (used), Ref. -No.: 10322 Manufacturer: EKO PILL Type: PMPO 950 K Year of construction: 2010 Further information: The PMO 950K carousel jet washer is revolutionary maintenance-free washer, extremely compact and aesthetic structure, designed for oil contamination, machining emulsions and loose chips from washed objects. Despite its minimized dimensions, it works perfectly together with automated production lines for thorough washing, and optional rinsing and drying of moving parts on the internal conveyor. Short distance between station Loading and unloading facilities make it flexible. Washing, rinsing as well as drying operations take place in closed circuits, which significantly reduces costs - Gravity oil separator OGP - Fine filter EKO-PIL 20 µm - Vapor condenser with liquid regeneration Csdpo Ahmuljfx Aiiori - Drying heat recovery - Washing - Rinsing / Maintenance - Drying