Used Cured Meats for sale (1,806)

Year of construction: 1985, condition: ready for operation (used), Compressed air connection: 6 bar, connected load: 0.75 kW, can be inspected on site. Kwsdsq Ikawepfx Ad Nst

Year of construction: 2016, condition: like new (used), functionality: fully functional, machine/vehicle number: GoTx1900/2600FX, The GoTx® 192FX/190FX/260FX are powerful fixation units for pigment inks. Designed to run with the GoTx® 2190/2260 printers for seamless productivity. Utilising quad zone heater element plates below and above the media horizontally where the fabric is not touched during cure. For consistency we do not employ IR heatlamps to avoid cool cure zones across the media. Fixation on a horizontal path provides better control and avoids smoke, steam or oil which can be dragged across the media = ghost free imaging. Up to 60 linear meters per hour output, with variable top, bottom radial axial fans for steam removal Kwodpfx Adsv Dcc Rs Not The GoTx® fixation modules are designed for uninterrupted production and media is NOT touched during transfer fixation process.

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Kwsdpfxjycugpj Ad Nst Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Model North - South, clock wise rotation Belt width 600 mm Kwodoycqrhspfx Ad Nst Tiers 32 pcs. Product gap max. ± 89 mm Belt length ± 425 m Infeed height 800 mm Outfeed height 5.800 mm Cooling Freon Power 3 x 400V, 50Hz 45 kW total connected power Required cooling capacity: 150 kW Dimensions (l x w x h) : ± 5.660 x 8.080 x 6.530 mm motor compressors and panels not included

Condition: excellent (used), Year of construction: 2018, Source Technology PowerHeater and FlexiCut machines. Direct from meat-free facility, used for making vegetarian 'chicken style' products. In excellent condition and rarely available for sale as used machines. New price of these machines is £750,000 Kedjt Rh T Djpfx Ad Nswt

Condition: excellent (used), Flake ice machine on stand, can produce up to 3.2 tonnes per day of flake ice. Lovely condition. 3 in stock. Kwodpfsh Nnd Rjx Ad Not

Condition: excellent (used), Year of construction: 2012, Technical Data Product Number SK 11-320 Year of Manufacture 2012 Blade Length 517mm Height 900 mm Width 750 mm Length 980 mm Power 1 kW Power Supply Electric: 400V 50Hz 3N The Townsend SK 11-320 membrane skinning machine is a compact, high-quality device for removing membranes from all types of meat. It is intended for butcher shops and production facilities. The machine features a built-in knife with a length of 517 mm. The device is easy to clean and operate. No tools required for disassembly and cleaning Ksdpfjycvyqox Ad Newt Additional information and videos for interested parties can be sent via email The machine is in perfect condition without any defects after a complete overhaul Drum is very sharp New bearings and seals Meets all European Union standards and safety requirements – CE certificate.

Condition: excellent (used), Year of construction: 2008, operating hours: 1,386 h, Salmon Slicer Make: Marel Model: 650 Built 2008 Low running hours: 1386 Kjdpfx Adsycr Eco Newt Serviced and maintained Very Good condition

Condition: good (used), functionality: fully functional, input voltage: 380 V, Rohwer stopbus. 20 liters. 380V. Kjdpfeycqhvox Ad Newt

Condition: excellent (used), Year of construction: 2012, operating hours: 1,522 h, Fish / Meat Bone Separator Make: Sepamatic Model: 2000VT Built 2012 Low running hours: 1522 supplied with 2 drums Kwedpfoyckiaex Ad Net

Condition: refurbished (used), functionality: fully functional, We offer the LASKA industrial mixer with a capacity of 1600 liters, designed for intensive mixing of meat, poultry, fish, vegetable stuffing, and convenience products. Its large working capacity makes the device ideal for medium and large meat processing plants, for the production of sausages, burgers, delicatessen products, and ready meals, ensuring uniform mixing of ingredients, spices, and functional additives. The mixer is equipped with an 18.5 kW motor. Kwsdpoycg H Iofx Ad Njt The machine has undergone a major overhaul of its engines and controllers, and has no vacuum. The device offers a mixing and unloading function, and hydraulic unloading flaps are located under the tank, making emptying the chamber quick, safe, and comfortable for the operator. Solid, heavy-duty stainless steel construction. Technical data: Manufacturer: LASKA Machine type: industrial mixer for meat and stuffing Working capacity: 1600 l Installed power: 18.5 kW Construction: stainless steel Dimensions: L: 2700 x W: 1450 x H: 1940 mm The LASKA 1600 l, 18.5 kW mixer is an excellent choice for plants that want to increase production efficiency, automate the stuffing mixing process, and achieve consistent product quality using a reliable, used machine.

Condition: used, We offer the Inject Star P60 separator – an industrial machine for advanced meat recovery (AMR), designed for meat and poultry processing plants and factories that want to maximize the use of raw materials and reduce production losses. The P60 separator works on the basis of a hydraulic press with a crushing chamber, which separates meat from bones and hard tissues and then presses it through a perforated filter. How does the Inject Star P60 separator work? In a special feeding device, the bones are fed into the pressing chamber and pre-compacted. Then, a linear hydraulic system separates the advanced meat from the bones and pushes it through a perforated filter (standard 8 mm). This results in high-quality meat mass while maintaining low calcium content and minimal temperature increase during the process, which has a positive effect on the quality and functionality of the final product. The AMR Inject Star system enables the recovery of up to approx. 35% of meat from red bones, with low wear on consumables and relatively low running costs. Technical data: Manufacturer: Inject Star Model: P60 Power supply: 400 V, 3Ph, N Installed power: 18 kW Capacity: 900 kg/h Capacity with bone breaker: 1500 kg/h Kwsdpfx Ajycc H Rjd Not Process type: hydraulic pressing system with perforated filter (8 mm, optionally 2 mm) Dimensions (L x W x H): 4900 x 1900 x 2900 mm Weight: approx. 4100 kg Advantages of the Inject Star P60 separator High meat recovery from bones – up to approx. 35% of high-quality meat can be recovered from red bones, which significantly increases the profitability of the raw material. Low calcium content – the end product is characterized by a low calcium level (< 1,000 mg/kg) thanks to the use of a precision pressing chamber and perforated filters. Minimal temperature increase – the separation process causes only a slight increase in meat temperature, which has a positive effect on color, structure, and technological properties. Low operating costs – the low-wear design and low maintenance requirements reduce running costs and the risk of expensive downtime. Possibility of line expansion – according to the manufacturer’s offer, the separator can work with a bone crusher as a preliminary stage and with additional soft tissue separators, as well as various loading systems.

Condition: like new (used), functionality: fully functional, KILIA Angle Automatic Grinder E130 / 2000S – Frozen Meat Grinder (factory-refurbished 2026) 200 L hopper | Hydraulic loading | down to –17 °C | 2-speed | PLC control For sale is a KILIA Angle Automatic Grinder E130 mm 2000S, configured as a frozen meat grinder and factory-refurbished in 2026. This machine is in absolutely first-class condition, both technically and cosmetically, and is maintained at a top level – ideal for professional continuous operation. Features & Highlights - Factory-refurbished in 2026 – professionally overhauled and upgraded Kjdpfjyccnnex Ad Nswt - Stainless steel construction - 200 L hopper with hydraulic loading system (for 200 L tote bins) - Screw and screw housing: stainless steel - Frozen meat package for operation down to –17 °C, incl. mixing device - Reinforced gearbox (150 / 300 rpm) - 2 speeds for main screw - 2 speeds for feed screw - Electrically interlocked safety grid - Lifting device / loading system - Electrically interlocked discharge protection - PLC control with push-buttons - Integrated control cabinet Drive Data (400 V / 50 Hz) - Main screw: 11 / 15 kW - Feed screw: 1.0 / 1.4 kW

Condition: used, Meat mixer Ital Form Model: S120 Two mixers Dimensions: 110x65x100cm Volume: 120 liters Capacity: 60 kg Electric power: 3kW Kodpfxex U D Sgs Ad Nowt Voltage: 380V 50Hz

Condition: like new (used), Meat mixer Ital Form Model: S80 Kodpfxsx U D R As Ad Nswt Two mixers Dimensions: 85x65x100cm Volume: 80 liters Capacity: 40 kg Electric power: 1.9kW Voltage: 380V 50Hz

Condition: good (used), 1 x Syspal column lifter type 600/scb-1480 for 200 and 300 litre eurobins. Located Wiltshire. UKFM1- 6623 Kjdevq N Duopfx Ad Njwt

Condition: good (used), 1 x Syspal column lifter type 600/scb-1481 for 200 and 300 litre eurobins. Located Wiltshire. UKFM1- 6624 Kjdpfx Adsvq N Nws Nswt

Condition: good (used), Year of construction: 2020, 1 x Riggs auto pack 1000 product pump. Y.O.M 2020. Model Number:- TT2716. Located Wiltshire Kedpjvm U S Njfx Ad Njwt

Condition: excellent (used), Year of construction: 2022, GEA MULTIFORMER, STICK INSERTER AND COLUMN LOADER 1 x GEA Multiformer Multiformer 400 Year: 2022 Kjdpfjvcc N Uox Ad Nowt 1 x GEA Stick Inserter 400 1 x GEA Mobile column loader *Videos available* Located in South Wales, UK UKFM2-6602

Condition: good (used), functionality: fully functional, Hobart meat grinder. Kwjdpfxeybaarj Ad Net Model: 4732 380V.

Condition: used, breader suitable for standard and Japanese crumbs and corn flakes Kedpfxswdgiyo Ad Nswt all stainless steel mobile adjustable speed belt width 900 mm with extra outfeed belt with air knives dimensions (l x w x h) : ± 3.200 x 1.800 x 2.200 mm 2,73 kW

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Offered is a mixer-angled grinder from manufacturer Mado, type MEW 621 S, year 2023, in like-new condition. The machine operates on 400 volts, 5.5 kW, fully stainless steel, new Unger system 98 mm, factory reconditioned, immediately ready for use. The machine features both mixing and wolf/grinder operation. Further details upon request. Ksdpsya Ii Ssfx Ad Njwt Payment in cash or in advance. Sale only to commercial customers. No warranty or guarantee.

Condition: good (used), functionality: fully functional, saw band length: 1,750 mm, saw band width: 16 mm, Bone Saw Mado MKB 649 Kwedpfxoya H U To Ad Net 16A, 380V. Workshop inspected, defects rectified. Motor brake. New saw band. Inspection and test run possible! Additional machines available. Cash or advance payment! Sale to businesses only. No warranty or guarantee.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Offered is an angle grinder from manufacturer Mado, model MEW 623, year 1999, in very good condition. The machine operates on 400 volts, 9 kW, is made entirely of stainless steel, and features an Unger 114 cutting system. The machine has two grinder passages. Workshop tested, immediately ready for use. Kwodoya H T Ajpfx Ad Nst Further information upon request. Payment by cash or advance bank transfer. Sale only to commercial customers, no guarantee or warranty.

Condition: good (used), functionality: fully functional, Offered for sale is a Weber derinder, model AS 450, 400V / 16A / 0.4kW. The machine is fully functional and immediately ready for operation. Cutting width approx. 39 cm. New blade installed. Inspection and trial run possible. Six machines available in total. Further details on request. Payment by cash or advance bank transfer. Ksdpfxsya H Hce Ad Newt Sale to commercial buyers only, no warranty or guarantee.