Used Fermentative Room for sale (1,154)

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 08/2028, type of input current: three-phase, machine/vehicle number: 2026, Lillnord fermentation room Model: Maryline R 103-81 R Standard Gjdok Itk Ropfx Akyebu Touch screen computer control Temperature range from max. + 20°C to + 45°C Humidity from 60% to 90% RH for 1 trolley sheet metal 600x 800 mm Trolley dimensions: 610 x 810 x 1820 mm, WxDxH PID regulation of humidity and temperature Water connection 3/4 inch stainless steel version Connection 400V, 3000 Watt, 16A-CEE plug Dimensions: 810 x 1030 x 2365 mm, WxDxH New device 12 months of warranty Option: - Door with thermal window - Impact protection in stainless steel or PVC Lillnord service partners

Condition: used, Year of construction: 1978, x-travel 100 mm y-travel 200 mm z-travel 450 mm taper ISO SK 40 turning speeds 22 - 1400 U/min total power requirement 7,5 kW weight of the machine ca. 2,6 t dimensions of the machine ca. 1,8 x 2 x 1.85 m 3-axis digital readout - Rapid traverse - Documentation Gbodpfxsz Rqpae Akyju

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter Profipress C 2800 P - 6 m gluing press Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Gbjdpjyvgiaefx Akysu Year of manufacture: 2009 Condition: Very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of glued wooden panels and elements made of soft timber. The machine was developed for efficient production using PVAC glue in D2 / D3 class and allows processing of material within specified width, thickness and input length ranges. According to the documentation, this model can process timber with widths from 30 to 80 mm, thicknesses from 15 to 40 mm and input lengths from 2100 to 2800 mm. The machine allows the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. The output is up to 10 to 15 infeeds per minute, depending on the entrance width. The Profipress C 2800 P - 6 m is intended for processing soft timber. The permitted bending tolerance is maximum 5 mm per meter. The documentation also specifies recommended operating conditions, including room temperature from 15 to 30 degrees Celsius and air humidity in the range of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Performance: max. 10–15 infeeds/min, depending on entrance width - Timber width: 30–80 mm - Timber thickness: 15–40 mm - Timber entrance length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Timber type: soft timber - Permitted bending: max. 5 mm/m - Glue type: PVAC D2 / D3 - Recommended room temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press designed for glued panel production - Machine from the renowned Weinig Dimter brand - Output up to 10–15 infeeds per minute - Possibility to produce panels with variable width - Suitable for processing soft timber - Works with common PVAC D2 / D3 glue - Industrial application for woodworking and production plants

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, The machine is in very good condition and comes from a training workshop. Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 rpm Gsdpfx Aoz Rpcrekyebu feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Deckel FP 1 MK with TNC 123, year of manufacture 1994, with CE marking. Spindle speeds: 40 - 2000 rpm, SK 40. Travel distances: X 300, Y 160, Z 340. Stepless feed rate + rapid traverse in all axes. Weight: approx. 880 kg. Accessories: Universal table, electric central lubrication system, coolant system, collet set, 5 tool holders, Röhm machine vise, swarf drawer. Condition: Original, not repainted, smooth operation at all spindle speeds and axis movements, and flawless guidance. Can be inspected while powered on. Gbodpfxszx Ep Sj Akysu Free loading at D-88433 Schemmerhofen.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, DECKEL FP 4 MK Year of manufacture: 1992, with TNC 113 active digital control with positional programming Spindle speeds: 50 - 2500 rpm Travel ranges: X 500, Y 400, Z 400 Feed rate: stepless + rapid traverse Gbodpfx Akezxwz Teyou Hydraulic tool clamping system SK 40 Hydraulic machine vice Allmatic 125 Universal table Central lubrication, electric, lighting, machine feet, coolant system. Condition: original, not repainted Smooth and quiet operation at all spindle speeds Guideways and axis movements are in perfect condition. Weight approx. 1500 kg Can be inspected while powered on. Free loading D - 88433 Schemmerhofen

Condition: used, Year of construction: 2019, Overview This complete brewhouse including fermentation and storage cellar and KEG filling was installed in 2019 and largely built by the Chinese manufacturer Shandong Yuesheng. The scope of delivery includes various equipment necessary for operation. The brewhouse will become vacant as the previous owner is closing the brewery due to retirement. The brewery ran smoothly until the end. The equipment is still set up and connected and can be viewed in person at any time. Scope of delivery - 4 units Brewhouse | Shandong | 20-25HL | 2019 - 1x mash tun - 1x lauter tun Gbodpfx Aoyb N N Ajkyju - 1x boiling or wort tun - 1x whirlpool - Manual shut-off valves - Cooling of fermentation tanks is automated - Malt mill | Shandong | 2019 - Steam generator | Yano (Shanghai Yano Boiler Manufacturing Co. Ltd) | 2019 - 200 kg/ h - Oil-fired, but can also be operated with gas by replacing the burner - Wort cooler, 2-stage | Shandong | 2019 - 2x cooling unit (glycol) | 2019 - 2x 28kW - Glycol tank - Hot water tank - 6x Fermentation tanks | 2760l | 2019 - 3 bar, insulated with jacket cooling, CIP capable - 12x Storage tank | 2760l | 2019 - 3 bar, no cooling, were in a separate cold room - Reverse osmosis - Compressor | JAN | 585l/ min | 2020 - KEG filling - 1x drum washer with automatic caustic refill and steam-heated - 1x keg filler - Up to 70 barrels/ h, - Fitting: Type S, basket fitting, - Siemens S7 - Dismantling and loading are included in the price Also available for purchase: refrigerated containers, dispensing systems, KEG kegs, etc.

Condition: ready for operation (used), Year of construction: 1984, Immediately available from training center: MAHO Tool Milling Machine Model MH 600 Gjdpfx Akjz Ixk Ssysbu Year of manufacture: 1984 Table: 700 x 400 mm Travel X/Y/Z: 500/400/400 mm Speeds: 40 – 2500 rpm SK 40 Spindle stroke: 80 mm Coolant system Drive: 4 kW Feeds: 8 – 400 mm/rev Head swivels 90/90 degrees Weight: 1900 kg Price: EUR 2,250.-- plus VAT, ex location.

Condition: excellent (used), Year of construction: 2012, 455 USED Koma CDS cooling - proofing room. TECHNICAL DATA: - year of production: 2012 - temperature range: -12°C - +30°C EXTERNAL DIMENSIONS (in cm): - width 137 Gbedpfx Ajzlm T Sjkysu - wepth 260 - height 255 INTERNAL DIMENSIONS (in cm): - width 89 - depth 205 - height 200 The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We also offer bakery machines, bakery equipment, roll lines, bread lines, refrigerator and proofer. If you want to see our full current offer, visit our Bakeres profile.

Condition: good (used), Year of construction: 1998, functionality: fully functional, overall weight: 1,650 kg, Table surface: 800 x 400 mm Travel ranges: Longitudinal travel (X): 600 mm Lateral travel (Y): 400 mm Vertical travel (Z): 380 mm Gbodez N Et Rspfx Akyou Weight, approx.: 1.65 tons

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 75080154.1/TKT 2, type of input current: three-phase, input voltage: 400 V, input current: 40 A, 30 C – FINN-CONVEY V307 Conveyor 3-Level Table System – Modular Cutting Room Conveyor Description For sale is a FINN-CONVEY V307 conveyor 3-level table system designed for textile cutting room operations. This system functions as a modular conveyor-based table solution for material handling and fabric movement within production. It enables efficient workflow between spreading, buffering, inspection, and cutting stages. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 (unit 35 C). This integration significantly reduces manual handling and downtime, especially during fabric roll changes and feeding operations. The video material also shows a GERBER XLS-125-180-L Spreader (unit 32 C), which was used in the same production line. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Includes • FINN-CONVEY V307 conveyor table system • Multi-level conveyor structure (3 levels) • Integrated belt transport system • Drive motors and transmission units • Sensor components for positioning and control • Electrical control cabinet Technical Details • Manufacturer: Finn-Convey • Model: V307 • Type: Conveyor table system • Application: Fabric handling and transport in cutting rooms • Configuration: Multi-level modular system • Levels: 3-level buffer structure • Power: Industrial 3-phase system Key Advantages • Full integration with automated cutting systems (Lectra line ready) • Reduced manual labor in fabric feeding and handling • Continuous material flow for optimized cutting efficiency • Modular system adaptable to different production layouts • Industrial-grade mechanical construction for long service life Production Efficiency Gbodpfxoy Akpze Akysu The 3-level buffer structure allows continuous operation of the cutting machine by maintaining a constant material supply. This reduces idle time and enables • Higher throughput in cutting operations • Efficient batch handling • Improved workflow synchronization across production stages Build Quality Finn-Convey systems are known for their robust mechanical construction, designed for long-term industrial use. With proper maintenance, these systems are built to operate reliably for decades. Condition Used industrial condition Fully functional prior to shutdown Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Cutting room conveyor systems • Fabric transport and handling • Workflow optimization in garment production • Textile production lines Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Year of construction: 2016, condition: used, Four identical retarder prover chambers for bakery applications are offered. Equipped with a shared control cabinet. Inspection possible by arrangement. Gbedpfsz Irlvox Akyju

Condition: used, Year of construction: 2021, We are offering these used DME 40HL 40HL insulated fermentation tanks, manufactured in 2021. Manufacturer: DME Model: 40HL Date of manufacture: 06/23/2021 Serial number: B5715-30-03 Year of manufacture: 2021 Condition: used Type: 40HL insulated fermentation tanks Gjdpfx Akoza Twnjyebu If you have any questions or would like more information, please feel free to send us a message or call us. Price per unit.

Year of construction: 2017, condition: good (used), Lillnord Combi Room refrigerated chamber - used Gsdpfx Akezn Iyleysbu - year of manufacture 2017 - freezer room for 18 pallets, 60 x 80 (minus 18 degrees Celsius) - refrigerated room for 4-5 pallets, 60 x 80 (plus 6-8 degrees Celsius) - disassembled and stored in a warehouse - good technical condition - external cladding made of stainless steel - internal cladding painted - collection from the warehouse - price on request

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Gbodpfsq H H Ruex Akyeu Technical data attached to the photos.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, spindle speed (max.): 2,000 rpm, spindle speed (min.): 80 rpm, type of input current: three-phase, input voltage: 400 V, Equipment: rotational speed infinitely variable, Universal milling machine Deckel FP1 – Very good condition For sale is a Deckel FP1 universal milling machine in very good, well-maintained condition. The machine is equipped with a 3-axis digital display Heidenhain TNC 113 and stepless feed in all three axes. The Deckel FP1 is known for its precision, reliability and durability and is ideal for toolmaking, single-part production, repair work and training companies. Technical data Manufacturer: Deckel Model: FP1 Year of manufacture: 1985 Machine number: 15082 Spindle speed: 80–2,000 rpm Drive power: 1.6 / 2.0 kW Stepless feed in X, Y and Z axis Rapid traverse in all three axes Travel ranges (X/Y/Z): 300 / 160 / 340 mm Fixed angular table Vertical milling head on spindle head, adjustable by 100 mm Vertical and horizontal spindle with SK40 collet Clamping system: S20x2 Godjzlnmmjpfx Akyjbu Spindle brake Space requirement: 1.30 m x 1.10 m x 1.60 m (L x W x H) Machine weight: approx. 850 kg Equipment - 3-axis digital display Heidenhain TNC 113 - Hydraulic vise - Coolant system - Operating manual The machine is in very good technical and optical condition and is ready for immediate use. An inspection and a test run can be arranged at any time by appointment.

Condition: excellent (used), 453 USED Koma CDS cooling-proofing room. Gjdozlhx Aspfx Akyebu TECHNICAL DATA: - temperature range: -12°C - +30°C EXTERNAL DIMENSIONS (in cm): - width 137 - depth 260 - height 255 INTERNAL DIMENSIONS (in cm): - width 89 - depth 205 - height 200 The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We also offer bakery machines, bakery equipment, roll lines, bread lines, refrigeration and proofer. If you want to see our full current offer, visit our Bakeres profile.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 5,150 mm, total length: 16,000 mm, total height: 4,850 mm, temperature: 2 °C, We are offering this like-new Heidinger I-1751 refrigerated storage room, manufactured in 2023. Type: I - 1751 Year of manufacture: 2023 Double refrigerated storage room, 2-8°C (unused) Each with a Viessmann double door, 2m x 2.7m Redundant design Internal dimensions approximately 16m (L) x 5.15m (W) x 4.85m (H) each Walls made of 100mm sandwich panels No separate floor, therefore accessible with a forklift Compressors: 4x Bitzer Ecostar LHV5E/2DES-3.F1Y-40S Evaporators: 4x Güntner GACC RX 040.1/2WN/DJA4A.UNNN The refrigerated storage room was built for storing medication and has never been put into operation after acceptance by the manufacturer. The pallet racking shown in the pictures is not included in the offer. Dismantling and transport are the responsibility of the buyer. Gsdpfx Akoykrtpeyebu If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2014, Set of 4 modular office units, room-in-room system, two-story, including staircase, approx. 139m2 – used: Price ex-works: €19,950 (net), disassembled, packed, and loaded! Item no. 11: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, likely 2014 Gbedpfxszqzuus Akyou Roof accessible, with a maximum load capacity of 100kg Element width: approx. 1.03m Length including staircase: total approx. 14.51m Width of “gap” for the staircase: approx. 1.27m Right block, top and bottom: Length: approx. 4.60m (4 elements and one narrow element) Left block, top and bottom: Length: approx. 8.64m (8 elements) Depth approx.: 5.28m (5 elements) Ground floor height: approx. 2.70m Total height approx. 5.40m 4 doors All offices are closed on three sides and therefore stand with one side against the hall wall Includes lighting, etc., as available Ground floor without flooring, upper floor with flooring Sale excludes furniture, etc. Condition: good Available: from approx. Q4 / 2026 Location: Hamburg

Condition: excellent (used), 450 USED Proving chamber, Refrigerated proofer, Dough fermentation chamber. INTERNAL DIMENSIONS (in cm): - W: 280, - L: 330, - Door height 200, - Door width 100. EXTERNAL DIMENSIONS (in cm): - W: 330, - L: 340, - H: 240. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Gbedpfx Aezlcmuekyeu We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: used, Year of construction: 2004, functionality: fully functional, total height: 5,000 mm, total width: 3,100 mm, Grape fermenter with a capacity of 15 cubic meters (15 000 liters), in very good condition. It has a water jacket and an agitator with an electric motor. There are 4 units available, the price is for one piece. If you purchase more than one unit, price can be negotiated. TECHNICAL DATA: Volume: 15 m³ (15000 liters); Type: Vertical; Material: Stainless steel, food grade; Diameter: 3100 mm; Height of the body with legs: 5000 mm; Year of production: 2004; Manufacturer: PIM-Haskovo With electric motor and agitator, Power: 4.1 kW, Electrical supply: 380/220V, 50Hz, IP54 protection Built-in thermostat and temperature control panel with a water jacket. Gbsdpfx Akoy It Uksyou

Condition: good (used), Year of construction: 1987, Mikron WF2SA machining center with a 3-axis Heidenhain Aktiv digital control system. Fixed angular table, SK 40 spindle mount. Ready for operation. Machine can be demonstrated under power by arrangement. Gbsdpfx Aszvyh Dokysu

Condition: used, Year of construction: 2017, machine/vehicle number: 17200241, usable tank capacity: 40 l, cooling capacity: 1.6 kW (2.18 HP), input voltage: 400 V, total width: 590 mm, total length: 949 mm, total height: 1,292 mm, Used Tradilevain TL-40 sourdough fermenter, designed for the preparation, storage, and regular management of sourdough in a professional bakery. Maximum usable capacity of 40 L, ideal for artisan bakeries, production laboratories, and bakeries using natural sourdough daily. Tank volume of 80 L with a maximum total capacity of 50 L, allowing for comfortable handling of sourdough preparations. Minimum usable capacity of 20 L and minimum total capacity of 25 L, practical for adjusting production according to the bakery's actual needs. 2 drain taps to facilitate draining, cleaning, and daily use of the sourdough. Loading height of 1120 mm, designed for ergonomic use in a professional laboratory. Compact dimensions: 590 x 949 x 1292 mm, allowing for easy integration into a bakery production space. 400 V power supply with a power of 1.6 kW, suitable for a professional three-phase installation. Weight of 200 kg, guaranteeing a robust and stable construction for regular use in a commercial environment. Year 2017, serial number 17200241, reference TL-40. Used professional equipment, suitable for bakers who wish to integrate or develop sourdough production with specialized equipment. Ideal solution for Proculis: a reliable, compact, and functional sourdough fermenter to improve work organization and consistency of preparations. Used Tradilevain TL-40 40 L sourdough fermenter The used Tradilevain TL-40 sourdough fermenter is a professional piece of equipment intended for bakers, pastry chefs, and production laboratories who wish to work with natural sourdough with more regularity, comfort, and organization. Thanks to its maximum usable capacity of 40 liters, it allows for the preparation and storage of a quantity adapted to the daily needs of an artisan bakery or a professional production facility. This model is particularly interesting for professionals who want to incorporate sourdough into their range of breads, improve the consistency of their preparations, or optimize fermentation monitoring. Its compact size, 80-liter tank, and two drain taps make it a practical solution for managing sourdough on a daily basis. Product: used professional sourdough fermenter Brand: Tradilevain Reference: TL-40 Maximum usable capacity: 40 L Minimum usable capacity: 20 L Maximum total capacity: 50 L Minimum total capacity: 25 L Tank volume: 80 L Number of taps: 2 drain taps Loading height: 1120 mm Dimensions: 590 x 949 x 1292 mm Voltage: 400 V Power: 1.6 kW Weight: 200 kg Year: 02/17/2017 Gjdpfx Aezyqqqekyjbu Serial number: 17200241

Year of construction: 2018, condition: used, This listing is for a Solaris Biotech Solution Jupiter 3.0 Fermentor. The unit is in full working condition and is ready for immediate release. The Solaris Biotech Solution Jupiter 3.0 Fermentor is a highly versatile and configurable bioreactor system, ideal for laboratory-scale applications. With advanced automation and robust design, it caters to a wide range of research and development needs, as well as small-scale production. Key Features: Autoclavable and Sterilizable Design: Ensures ease of cleaning, sterility, and reliable operation for contamination-free processes. Flexible Vessel Options: Available in various aspect ratios and thermoregulation designs, with total volumes ranging from 2.0 L to 10.0 L. Pressure Control: Handles pressures up to 1.6 bar in the 2 L and 4 L jacketed vessels, with continuous gas-in and gas-out flux. Innovative SCADA Software (LEONARDO 3.0): Provides automated management of fermentation and cultivation processes, ensuring precision and ease of operation. Parallel Management: Supports simultaneous operation of up to 24 units via a single HMI with a 24” display, streamlining complex workflows. Remote Access: Enables monitoring and control via PC, tablet, or smartphone, using QR code scanning or a dedicated web portal for remote convenience. Applications: Process Development and Optimization: Facilitates experimentation and optimization of bioprocesses for scale-up and scale-down studies. Education and Research: Suitable for educational purposes and basic research in bioprocessing. Small-Scale Production: Supports small-batch manufacturing and pilot-scale processes. Benefits: Cost-Effective Performance: Combines advanced features with affordability for laboratory and production environments. High Level of Automation: Simplifies management of fermentation and cultivation with LEONARDO 3.0 software, reducing operator workload. Versatility and Configurability: Adaptable to a wide variety of applications, ensuring compliance with validated GMP regulations. Gjdpfxsxxz T Hj Akyjbu Technical Specifications: Material: VALOX resin (external) and silicone (internal) Autoclavable: 121-133°C for up to 30 minutes Residual Volume: 0.04 mL Flow Rate: 65 mL/min

Condition: good (used), Year of construction: 2018, Jac Fermenter - used - year of manufacture 2018 - capacity approx. 120 l - electronic control - machine has been technically inspected - collection from warehouse / shipping option available - price on request Gbodpezy Ncfofx Akyeu