Used Cross Wedge Rolling Machine for sale (70,740)

Condition: refurbished (used), DALEX roller seam welding machine, cross seam version Projection: 350 mm Nominal power: 160 kVA Sec. short circuit current: 38.5 kA Sec. no-load voltage: 4.8-9.6 V Electrode force: 140-2,040 daN with 2-step switch and auxiliary control with thyristor power stage and Synchronous welding control MPS 100 multi SPECIAL NOTE - PLEASE NOTE The above performance data are taken from the machine's rating plate. Ihsdpfxedx Suhj Ah Net When the machine was inspected, it was found that a 200 kVA welding transformer was installed by the previous owner. This changes the performance data. .

Condition: good (used), GUK FA 49/4 Folding Machine + GUK FA 49/4 Cross Folding Module The machine is in very good technical and visual condition. Format: 490x690mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes on the main unit 4 perpendicular cassettes on the cross-folding unit First cassette extended. Cassette adjustments are dial-based. Smooth speed control. Counter with batching function and folding speed indicator. Ihedpfox Ncu Nox Ah Njt Rietschle compressor. Tool roller with a large number of perforating, creasing, and cutting tools. Raised sound insulation covers. Vacuum-assisted feeding Mobile delivery (free standing delivery) with smooth speed control Full documentation. Extensive set of accessories.

Condition: good (used), functionality: fully functional, Year of construction: 2000, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 400 mm, side roll diameter: 350 mm, roller diameter: 500 mm, roller length: 3,050 mm, working width: 3,000 mm, working height: 800 mm, sheet thickness (max.): 45 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 35 mm, overall weight: 17,000 kg, total length: 5,500 mm, total width: 2,350 mm, total height: 1,800 mm, power: 30 kW (40.79 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, Plate roll Sertom model EMO3020 variable geometry 3-roll plate bending machine capacity 3000 x 35 mm Year of make 2000 Top roll 400 mm Side rolls 350 mm Rolls surface length 3050 mm Capacity bending Plate width 3000 mm Plate thickness 36 mm Prebend 25 mm minimum rolling diameter starting from ID 500 mm and above -configuration -hardened surface of the 3 rolls Rerolling system for calibration of welded plates Front open drop-end to unload the closed shell -machine fully hydraulic operated Isdpfx Aeyanbueh Njht -variable geometry of the 3 rolls with pinch prebend -cylindrical and conical plate bending -hydraulic driven rotation of the upper roll with braking system Control console centralized electric with digital position readout of the 3 rolls Digital readout front/rear of upper roll for conical plate forming Electric motor power 30Kw installed on hydraulic unit Voltage 3 phase 380/50 Safety and emergency stop installed Manuals operation and service original the machine

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Wire diameter range: up to 500 N/mm² 22 - 7,0 mm up to 1.000 N/mm² 21 - 8,0 mm over 1.000 N/mm² 20 - 8,0 mm Number of kalibers: 10 Ihedpjyak Eijfx Ah Not

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 01/2027, type of input current: three-phase, overall weight: 1,000 kg, König Rex T5S Head Machine Dough divider and rounder Robust construction Weight range approx. 30 to 85 grams with discharge conveyor Connection: 400V, 16A-CEE plug Used machine Visit our large bakery machines warehouse! Iedpfeyakliex Ah Njht

Condition: excellent (used), Very good condition automatic ElectroMashStan post and fence profile rolling line for posts from 0.9 mm to 1.5 mm sheet thickness. The sheet can be painted. Profile: 40x60 mm. Automatic cutting by guillotine or circular saw. The automatic line has 6 speeds. It was used for fence post production. Purchased new, single owner. Line length: 15 meters. If you have further questions, we will be happy to answer them. Iodpfoufz Rdex Ah Neht

Condition: excellent (used), Year of construction: 2018, sheet width 1040 mm plate thickness 3.00 mm ST diameter of upper rolls 100 mm side roll diameter 100 mm diameter of lower rolls 100 mm speed 6.0 m/min semi-automatic operated FM 2.1R voltage 400 V total power requirement 2.2 kW weight of the machine ca. 740 kg range L-W-H 2250 x 825 x 1910 mm Very well-kept condition (almost as good as new)! current new price including accessories ~ 28.000 Euro special price on request Start and finish rounding is very easy with this machine thanks to the special concept, the extensive accessories and the robust construction. Machine for for one-off production and series production = extremely universal and economical. Equipment: - Robust electro-mechanical three-roll round bending machine - Driven by spur gear brake motor Primary reduction gear - Top roller Side roller electrically driven - Asymmetrical roll arrangement - Manual bottom roll adjustment * with analog position indicator - FASTI control unit "FM 2.1R" * Setting max./min. max./min. travel value side roller - Swing-out top roller, with hinged bearing - Conical bending device Iedjx U Emfopfx Ah Nsht - 1x freely movable double foot switch * Right / left rotation of the rollers - Electrical safety device (cable) - original operating instructions

Condition: used, total length: 6,500 mm, total width: 2,400 mm, total height: 2,000 mm, Empty weight: 23.000 kg Price: On request Plate roller Sheet metal roller Model: Hydraulic Model: 4-Roller! Manufacturer: Chr. Haeusler (Switzerland) Type: VRM HY L4000x6 Working width: 4100mm Max. sheetthickness: 6mm (Inox) - 14mm (Alu) Upper-roller: 350 mm Other rollers: 250 mm Incl. conical bending Incl. hydraulic retraction-assist Machine-weight: 23000kg Video's available before dismantling. - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 4 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4100 Iedpfx Ajx U Dmwsh Njht - Top roll diameter [mm]: 350 - Bottom roll diameter [mm]: 250 - Options: Plate support, Cone rolling - Transport dimensions: 6500mm x 2400mm x 2000mm (l x w x h) - Transport weight [kg]: 23000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1970, plate thickness max. 1,5 mm sheet width max. 1.020 mm Year ca. 1970 manual ja ja ja Iodpfx Ahjx U Dako Noht +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1988, working width 2000 mm sheet width - max. 3 mm diameter 120 mm weight 700 kg Ihedpfx Aox U A Tpoh Njt

Condition: used, Year of construction: 1966, sheet width 2010 mm plate thickness 5 mm Ihodox Uz Acjpfx Ah Not weight of the machine ca. 3 t Foldable bust

Condition: used, Year of construction: 1966, sheet width 2010 mm plate thickness 5 mm weight of the machine ca. 3 t Ihodex Uz Aiepfx Ah Net Foldable bust

Condition: used, Year of construction: 2003, total length: 3,230 mm, total width: 1,150 mm, total height: 1,120 mm, Empty weight: 1.400 kg Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 220281 - Drive system: Conventional - Drive: Mechanical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 2.2 - Max. sheet thickness [mm]: 2 - Max. prebending thickness [mm]: 2 - Max. working width [mm]: 2050 - Top roll diameter [mm]: 110 Ihsdex Tuy Eopfx Ah Njt - Bottom roll diameter [mm]: 110 - Bending speed [mm/min]: 3 - Transport dimensions: 3230mm x 1150mm x 1120mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1996, functionality: fully functional, Diameter x width: 750 x 1,500 mm max. operating pressure 300 bar Cutting force 60 kN Weight: approx. 2,800 kg 76 chisel Ihsdpfxsqnvtzo Ah Nst

Condition: new, Ostas 4-Roller Plate Bending Machine 4R OHS 3070 x 250 Hydraulic side roll adjustment 3 digital displays Hydraulic drop-end bearing Hardened rolls Ihsdpfx Aeyaqmaeh Nst Cone bending device Separate control panel Roll length: 3070 mm Top roll diameter: 250 mm Side roll diameter: 200 mm Total motor power: 7.5 + 1.5 kW Weight: 9800 kg Dimensions (mm): 5050 x 1550 x 1470 (L x W x H) Bending performance data 9 mm at minimum inner diameter (5 x top roll) 7 mm at minimum inner diameter (1.5 x top roll) Pre-bending performance data 7 mm at minimum inner diameter (5 x top roll) 5 mm at minimum inner diameter (1.5 x top roll) All bending capacities are based on a yield strength of 250 N/mm2 Material: (ST 37 – ST 42 structural steel)

Condition: new, Ostas 4-roll plate bending machine 4R OHS 3070 x 320 Hydraulic side roll adjustment 3 digital displays Hydraulic drop-end bearing Hardened rolls Conical bending device Ihsdpexrdxfefx Ah Njt Separate control panel Roll length: 3070 mm Top roll diameter: 320 mm Side roll diameter: 240 mm Total motor power: 20 kW Weight: 13,050 kg Dimensions (mm): 5900 x 1850 x 2050 (L x W x H) Bending Performance Data 16 mm at minimum inside diameter (5 x top roll) 12 mm at minimum inside diameter (1.5 x top roll) Pre-bending Performance Data 12 mm at minimum inside diameter (5 x top roll) 10 mm at minimum inside diameter (1.5 x top roll) All bending capacities are calculated based on a yield strength of 250 N/mm2 Material (ST 37 – ST 42 structural steel) The pictures shown are for reference only.

Condition: new, Ostas 4-Roller Plate Bending Machine 4R OHS 3070 x 275 Hydraulic Side Roller Adjustment 3 Digital Displays Hydraulic Drop-End Hardened Rollers Cone Bending Device Separate Control Console Roll Length: 3070 mm Top Roller Diameter: 275 mm Side Roller Diameter: 220 mm Total Motor Power: 16.5 kW Isdpjxrduyofx Ah Noht Weight: 10,300 kg Dimensions (mm): 5900 x 1750 x 1860 (L x W x H) Bending Performance Data 12 mm at minimum inner diameter (5 x top roller) 10 mm at minimum inner diameter (1.5 x top roller) Pre-bending Performance Data 10 mm at minimum inner diameter (5 x top roller) 8 mm at minimum inner diameter (1.5 x top roller) All bending capacities are calculated based on a yield strength of 250 N/mm2 Material (ST 37 – ST 42 structural steel) The images shown are for illustration purposes only.

Condition: used, Year of construction: 1971, material width 180 mm coil weight 0,5 t material thickness 2,0 - 6,0 mm coil external diameter 400 - 1250 mm no. of straightening rolls 5 straightening roll diameter 70 mm number of draw-in rolls 2 0 roll diameter 110 mm speed 20 m/min power requirement 4,0 kW Weight 2,8 t dimensions (WxDxH) 1,4 x 2,45 x 1,85 m with infinitely variable drive, pneumatic snubber roll, pneumatic intermittent lifting, coil loop control material thickness 2,0 mm at material width 180 mm Material thickness 6,0 mm at material width 40 mm Ihjdpfjvuk H Ssx Ah Not as is where is, WITHOUT additional work The putting into operation in our warehouse can be offered additionally on request

Condition: new, functionality: fully functional, Year of construction: 2023, machine/vehicle number: SY390-156, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Knuth, number of rollers: 4, roller (bottom) diameter: 360 mm, roller (top) diameter: 390 mm, side roll diameter: 300 mm, roller length: 2,600 mm, working width: 3,000 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, overall weight: 15,800 kg, total length: 5,470 mm, total width: 2,100 mm, total height: 1,985 mm, power: 22 kW (29.91 HP), input voltage: 380 V, number of digital displays: 1, Equipment: CE marking, cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, RBM 25/30 Hydraulic Plate Rolling Machine Standard Equipment: - 4 hardened rolls - Conical bending device - Digital display for side rolls - Separate control panel - Operating manual Technical Description: - Heavy-duty frame with modern, rigid construction - Hydraulic clamping bearings for easy material loading - Roll movement, parallelism, and conical adjustment all controlled via operator panel Isdpfsxdcxbjx Ah Njht - All rolls are induction-hardened and precisely mounted on high-quality bearings - Top and bottom rolls powered by independent hydraulic motors - Hydraulic components supplied by Parker and Bosch - Electrical components supplied by Siemens and Telemecanique - Minimum bending diameter: 3 × top roll diameter Technical Specifications: | Parameter | Unit | Value | |-----|-----|----- | | Working length | mm | 2,600 | | Maximum plate thickness (at 240 N/mm²) | mm | 30 | | Maximum pre-bending thickness | mm | 25 | | Number of rolls | pcs | 4 | | Top roll diameter | mm | Ø 390 | | Bottom roll diameter | mm | Ø 360 | | Side roll diameter | mm | Ø 300 | | Main motor power | kW | 22 | | Machine dimensions (L × W × H) | mm | 5,500 × 2,100 × 2,000| | Net weight | kg | 15,800 |

Condition: refurbished (used), functionality: fully functional, EXTRUDER UNIT FOR BRICKS AND CERAMIC BLOCKS BRAND: BEDESCHI MODEL: SL 750 EXTRUDER DIAMETER: 750 mm (cylindrical) PRODUCTION CAPACITY: 120 tons/hour (at 12 bar pressure) SCREW ROTATION SPEED: 10 / 17 rpm (controlled by ABB ACS 800 VECTOR INVERTER – 693A Output) TRANSMISSION: DIRECT DRIVE WITH BREVINI PDL 702 GEARBOX (remanufactured) AXIAL RETENTION: SKF 29452 Series E (new) DISC CLUTCH (2 units) GENERAL REFURBISHMENT: Blades, linings, pins, seals, clutch discs, paddle shaft bearings, blade sets, axial bearings, vacuum chamber lining (stainless steel), bearings for electric motors Operational test performed, painted and aesthetically finished. COMPLETE WITH: • HYDRAULIC OIL SYSTEM FOR GEAR SHIFT, FILTER, DEGASSER OPERATION • 2 WEAR-RESISTANT METAL-PLATED FILTERS FOR HOLES • CENTRALIZED LUBRICATION UNIT WITH FILTER • DISC CLUTCH (FOR EXTRUDER + DEGASSER) • ORIGINAL BEDESCHI DRIVE BELTS (FOR BOTH UNITS) • EXTRUSION MOTOR 315 KW, 6-POLE (original Bedeschi) • DEGASSING MOTOR 75 KW, 6-POLE • MOTOR LUBRICATION UNIT • VACUUM GROUP MOTOR 30 KW, 4-POLE • MAIN DRIVER ASSEMBLY WITH BELT TENSION ADJUSTMENT GUIDES • EXTRUDER BASE FRAME • DEGASSER UNIT • INLET PULLEY SUPPORT • DEGASSER WITH 2 COUNTER-ROTATING SHAFTS WITH PADDLES (VACUUM CHAMBER) • SLEWING JIB CRANE (original Bedeschi) with electric hoist ACCESSORIES INCLUDED IN THE SALE 1- 3 DIE HOLDERS BY TECNOFILIERE (ITALY) 2- 1 FLANGE WITH BOLTS FOR 2 SIMULTANEOUS DIES 3- 1 ABB ACS 800 INVERTER CABINET (extruder motor) 4- 1 OIL VACUUM PUMP UNIT 30 KW 5- 1 400L VACUUM STORAGE TANK MORANDO LV 8/12 HIGH-SPEED ROLLER MILL (refurbished) TECHNICAL SPECIFICATIONS Original manufacturer: MORANDO IMPIANTI Type: HIGH-SPEED ECCENTRIC PRESS, ELECTRONIC ACTUATION Cylinder width: 1200 mm Cylinder diameter: 800 mm Complete with: • Original Morando base platform • 01 complete spare roll for quick replacement (bearings, shaft, pulley) • Original Morando material inlet cover • Hydraulic control unit for structural load management • Servo-driven rolling gap calibration system • Original Morando documentation Mantle Condition Iedpex U Ukasfx Ah Njht Fast roll: 80% Slow roll: 60%

Condition: new, The KRM ST 20/6, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, including steel and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and an asymmetrical roll arrangement, the KRM ST 20/6 can handle even the heaviest plates with precision. The crowned and hardened rollers are suitable for processing stainless steel, while the machine boasts a motorized drive powered by a 4 kW electric motor. Control is simplified with a foot switch, and the emergency stop safety rope ensures safe operation. You can trust the central lubrication system for reliable maintenance and operation. For those looking for quality Plate Rolling Machines, the KRM ST 20/6 stands out as a solid investment. Request a quote today to enhance your sheet metal processing capabilities with this exceptional 3-Roll Motor Plate Roller. Isdpfxoqagtis Ah Nsht

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Ihsdjx Sr Dfspfx Ah Nst Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Condition: new, functionality: fully functional, Year of construction: 2026, HAV 3293 Plate width: 3200mm Top Roll diameter: 930mm Side rolls diameter: mm 800 Machine weight: 150 Ton Rolling capacities (Y:260Mpa/Ø 4650mm): 3200mmx155mm Iedeiivg Sjpfx Ah Nsht Prebending capacities (Y:260Mpa/Ø 4650mm): 3200mmx115mm

Condition: new, functionality: fully functional, Year of construction: 2026, Electronically controlled, hydraulic four-roller bending machine Make FACCIN, model 4 HEL/S 2122 Technical specifications: Number of Reels: Four Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 225 mm Lower roller diameter: 215 mm Side roller diameter: 165 mm Pressure force against the top roller: 100 tons Guaranteed installed power: 9.2 kW (12.5 hp) Guaranteed maximum turning speed: 4-8 m/min Guaranteed machine weight: 4,450 kg Length: 3,500mm Width: 1,200mm Height: 1,100mm Guaranteed capacities: Ihodsd Eqg Hepfx Ah Net for material with a yield point of 260 N/mm² Rolling capacity (full working width) 11 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,100 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 286 mm Standard equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged folding bearing Electronic parallelism system EPS Hardened rollers for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulic two-roller bending machine Guaranteed capacities: Sheet thickness Bending with material 260 N/mm² Yield point: 2 mm Sheet thickness bending with material AISI 304-316 stainless steel: 1.5 mm Cycle time per part: 15 seconds Iedpoc S N Riefx Ah Nsht Technical specifications: Working length: 1000 mm Installed power: 5.5 kW Rolling speed: 7 m/min immediately available from the factory!