Thread rolling dies UPWS 25

Thread rolling machine UPWS 25

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Ksdsuz If Njpfx Apmsna Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, Year of construction: 1991, workpiece diameter 30 mm Kedpfx Apjt Hwzcsmsna threading length 110 mm thread pitch 0,5-2,75 mm/GG total power requirement 4,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. m

Condition: used, Year of construction: 1986, overall weight: 6,500 kg, power: 42 kW (57.10 HP), input voltage: 380 V, broaching length: 1,600 mm, number of broaching positions: 1, workpiece diameter (max.): 500 mm, Manufacturer: Varinelli Milano Italy Model: BV 25 x 1600 x 500 Year of manufacture: 1986 Weight: 6,500kg Mach. No.: 3269 Ksdpowqmaxsfx Apmsna General / technical data: Vertical hydraulic internal broaching machine with one broaching station Pulling force: 25,000 kg Broaching stroke: 1,600mm Broaching stations: 1 piece! Passage width between the cylinders: max. 540mm Cutting speed: hydraulically stepless adjustable from 1 m/min up to max. 8 m/min Return speed: hydraulically stepless adjustable up to max. 18 m/min Required space for the machine: see image of machine layout plan Power supply / connection value: 380 Volts 50 Hz / 42 kW Accessories / special equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is equipped with a spring-mechanical locking (DIN 1417) in the pulling bridge. The tool feeder system is hydraulically-mechanically locked. The machine has a coolant system with integrated chip conveyor for installation in a pit. Remarks: The machine is still in its original paint. It is designed for use in mass production for medium and large batches; for optimal use, a foundation (pit) is ideally required. Pulling heads and needle pushers are available on request. The machine can be inspected at our warehouse. General information We constantly have a large selection of about 80 used broaching machines with pulling forces from 3,000 kg to 63,000 kg in horizontal as well as vertical design in stock. A large part of the broaching machines in stock is ready for demonstration and inspection. If required, we can offer you used equipment such as pulling heads, needle pushers, broaching tools, and other specific accessories. We are also a contract broaching company and can assist you with technical questions from 50 years of experience in broaching technology.

Condition: used, Year of construction: 1982, functionality: fully functional, machine/vehicle number: D32L/7864, Offer Number: D32L/7864 Machinetype: spring coiling machine Info: overhauled Make: WAFIOS Type: FUL8 Kjdpfxowi S Eko Apmona Constr. year: 1982/2000 wire diameter: 2,0-9,0 mm spring diameter: 10-120 mm feeding length: unlimited output pieces/min: 90 Location: In our warehouse

Condition: used, Year of construction: 1996, core drilling diameter max. 25 mm bore depth 1000 mm swing diameter mm total power requirement 25 kW weight of the machine ca. 12,5 t dimensions of the machine ca. m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling " Centre " Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 _____ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Knodot Hw Ayspfx Apmea Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed motors 27 Nm / 1.000 daN Spindle drive steplessly adjustable 7 kW Total electrical load, approx. 30 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm. " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc. " High Frequency Spindle Make GAMFIOR with stepless speeds " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc. " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation. " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm, " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions " Built-in coolant device with chip conveyor and various filters. " 2 steady rests. " Completely covered working area with access at the front and at the side. Condition : Very good condition. This is a rare and valuable machine. Under Power Delivery : immediately ex our Stock Payment : Net, after conclusion of contract.

Condition: refurbished (used), 2-spindle deep hole drilling machine under retrofit, completely overhauled, like new after conversion. Technical Data Ksdpjx E U S Esfx Apmsna Drilling system: ELB system Number of drilling spindles: 2 Min. drilling diameter: 1 mm Max. drilling diameter: 8 mm Max. drilling depth: 300 mm Nominal workpiece diameter range: 5–30 mm

Year of construction: 2013, condition: used, Technical details: Knedpfx Aeixl Ahopmoa swing diameter: 80 mm workpiece length: 450 mm weight of the machine ca.: 3500 kg

Year of construction: 2015, condition: ready for operation (used), There are three identical superfinish machines Nagel available, connected load: 11kW, controls: SIEMENS SIMATIC HMI, length: 2565mm, width: 2600mm, height: 2663mm, operational hours counter: 34,051h, year of construction: 2x 2015, 1x 2014, with documentation, there are additionally two automations Promot available. Knjdpfx Apjk S Ehksmja

Condition: used, ORT 3RP10 PLC thread rolling machine inverter (RPM) Knjdszbx D Nspfx Apmea scaffolding sleeves threading, shelves studs threading Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools Thread rolling is a metal forging process that forms threads into the mirror image of a roller die. Number of rollers: 3

Condition: good (used), Year of construction: 1998, FOR SALE: ORT ITALIA RP 24 Thread Rolling Machine Precision machine for thread forming, ideal for high-performance industrial production. Capacity & Technical Details Pressing force: 24 tonnes. Brand: ORT Italia. Model: RP 24. Year: 1998 Kedsy Shd Ispfx Apmsna Power supply: 380V / 20A. Equipment Automation: Integrated automatic loading. Control: Digital control panel. Ejection: Discharge chute included.