Used Cross Cut Miter Saw for sale (19,257)

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 117, saw blade diameter: 800 mm, cutting height (max.): 300 mm, input voltage: 400 V, saw drive: 15,000 W, operating pressure: 6 bar, Solid and powerful machine for carpentry and timber construction. Longitudinal cuts up to 300 mm cutting height. 800 mm saw blade for a large cross-cutting range, mounted on a rotary table. This allows nearly any mitre angle to be set. Longitudinal cuts, trimming, notching, wedge planks – everything is possible. The double-sided feed system effortlessly processes even large beams through the machine. In cross-cutting mode, the feed pistons serve as hold-downs. Two-hand operation ensures safe usage. The integrated support in the machine provides 3 m roller conveyors on both the left and right sides. The support options can be expanded by using tall, stable 3-roller supports (optional). Gkodpfx Akov Nktboyec The machine is tested and in good condition. Both digital displays including sensors are new (repairs alone cost €5,000). Many hoses have been replaced. The pneumatic unit has been serviced. Everything else was in excellent condition due to the machine's robust design!

Condition: good (used), Crosscut and miter saw, pull saw, crosscut saw, panel saw, crosscut and miter saw, radial saw, radial arm saw -Manufacturer: Elu, cross-cut and miter saw with table on solid base, mobile -Type: MGS 72 -Motor power: 0.85/1.2 kW -Speed: 1050/2100 rpm -Saw blade: Ø 305 mm Gkjdpfxepcmtho Akyoc -Cutting height: max.110 mm -Cutting width: max. 120 mm -Miter. 45° on both sides -Dimensions: 2100/840/H1180 mm -Total weight: 190 kg

Condition: new, Year of construction: 2026, Crosscut and Mitre Circular Saws Type ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both sides (left and right) Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: In stock at 54634 Bitburg - Immediately available - On request, we are happy to offer the saw blade as well. Godpfx Aew Hl Aqskyekc

Condition: ready for operation (used), Year of construction: 2012, BANDSAW TEBA 310 Gedsz Di Sljpfx Akyjkc -CE marking -Year of manufacture 2012 -Maximum cutting capacity 310 mm -Conventional / Semi-automatic -Miter cutting device -Coolant system -Cutting speed / Infinitely adjustable -Total power 3 kW -Saw blade dimensions 3990x27x0.9 mm -Approx. 20 spare saw blades Dimensions: L x W x H 1.7 x 1.2 x 1.9 meters / Weight approx. 1100 kg Errors and omissions excepted.

Condition: excellent (used), Catalog number 8048 TECHNICAL DATA - max. disc diameter 400mm - disc bore diameter 30mm - disc guard - cutting height 100mm - max. cutting width 640mm - possibility of angled cutting in the vertical plane - arm adjustment or disc adjustment - arm rotation capability: right/left - motor 400V, 3kW - table dimensions 1600x950mm - dust extraction nozzle diameter 60, 100mm - dimensions (L/W/H) 1500x1600x1500mm - weight 240kg ADVANTAGES – Made in Italy – Unpainted – DTR documentation included – Very good condition – Used saw Net price: 9500 PLN Net price: 2209 EUR, depending on the exchange rate of 4.30 EUR Gksdpfx Aozx Sqpjkyjc (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), Catalog number 7940 TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - blade guard - hydraulic blade feed - cutting height: 140mm - main motor: 4.4kW - table dimensions (length/width): 570x870mm - table height from base: 750mm Gjdpfoztzc Djx Akyskc - roller tables: 2 pcs - infeed roller table: 1170mm - outfeed roller table: 1210mm - sliding roller width: 600mm - overall machine dimensions (without roller tables) (length/width/height): 1040x820x900mm - weight: approximately 570kg ADVANTAGES – German-made – 2 roller tables – pneumatic blade stroke – used saw, in perfect condition Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 7937 TECHNICAL DATA - max. disc diameter: 500mm - spindle diameter: 30mm - pneumatic top pressure - disc guard - pneumatic disc extension - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 5.5kW - diameter of dust extraction nozzles: 120mm - table dimensions (length/width): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table + guide: 2050mm - outfeed roller table: 1650mm - roller table width: 510mm - overall dimensions of the machine (without table) (length/width/height): 1200x640x1280mm - weight: approx. 500kg Godozrnt Hjpfx Akyokc ADVANTAGES – Polish-made – original technical documentation – 2 roller tables – pneumatic disc stroke – used saw, in perfect condition Net price: 14900 PLN Net price: 3465 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in exchange rates)

Condition: used, Year of construction: 2018, functionality: fully functional, power: 5 kW (6.80 HP), cutting height (max.): 75 mm, MULTI BLADE CROSS CUT SAW MCEL 75 Gjdpfx Akjz D Utzoyjkc • Max. cutting height: 75 mm • Number of saws: 5 pcs • Power: 5x4 kW

Condition: ready for operation (used), functionality: fully functional, Manual feed of the cutting head Disc diameter 350 mm 3000 rpm Cutting angle adjustment -45/+45 degrees Gkedpfx Aez E Dy Hskyec Pneumatic clamping Cutting process initiated with two buttons Safety switch Minimum air pressure 6 bar Year of manufacture 1995 400V

Condition: used, Weinig OptiCut 260 optimisation cross-cut saw for cutting timber to length and marking defects (using fluorescent chalk). The separate measuring station records the lengths and marked defects. Technical data: - Cutting height: 260 mm - Saw blade diameter: 500 mm - Input length: 400 – 6,300 mm - Input thickness: 12 – 80 mm - Feed rate: max. 250 m/min - Cycle time: approx. 1 sec - Saw motor: 7.5 kW - Marking station: 5,000 mm - Outfeed conveyor: 7.5 m with 1 pneumatic ejector Gedpfx Akjzryupsyjkc - Control system: OptiCom Pro

Condition: used, Year of construction: 1998, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Godjy Hqdaepfx Akyskc Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Extraction connection: 100 mm Weight: 490 kg

Condition: used, Year of construction: 2012, operating hours: 926 h, total height: 1,800 mm, total length: 11,250 mm, total width: 900 mm, Colour: Grey Weight: 1.500 kg - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 546324 - Operating hours: 926 - Main motor power [kW]: 7.5 - Max. saw length [mm]: 7209 - Max. saw width [mm]: 300 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 85 - Input table length [mm]: 7850 - Output table length [mm]: 2400 - Options: Automatic pusher system - Voltage [V]: 400 - Current consumption [A]: 22 - Fuse [A]: 25 - Power [kW]: 11.0 - Transport dimensions: 11250mm x 900mm x 1800mm (l x w x h) - Transport weight [kg]: 1500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gkjdpoyna Ezsfx Akysc Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 6.719, functionality: fully functional, cutting height (max.): 90 mm, saw blade diameter: 350 mm, overall weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting depth: 120 mm Max. cutting height: 90 mm Max. saw blade diameter: 350 mm Saw blade bore diameter: 30 mm MACHINE DETAILS Voltage: 400 V Current consumption: 7.13 Fuse rating: 16 A Gksdpfx Asz Ni S Rskyjc Main motor power: 3.1 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 900 x 1,700 mm Weight: 500 kg Shipping packages: 1 piece

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm Gsdpfx Akofv Hphoyjkc cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: good (used), Code: 0252 Gkedpox Au A Nofx Akyjc Brand: MA BREVETTI Model: JUNIOR 275 Pneumatic double mitre saw for 45° + 45° cuts at both ends, in frames and mouldings of any shape and kind Technical data: Blade diameter mm 275 F30 Max cutting capacity: Width 70 mm - Height 90 mm Production rate approx. 700/800 cuts Motors n° 2 - 2 Hp each - rpm 2800 Power supply V.380/50 Operating pressure 6 bar Suction port diameter 100 mm Overall dimensions mm 850 x 700 x 1400 mm Weight kg 265

Condition: used, Dimter OptiCut 700 automatic optimising cross-cut saw (sliding saw) for cutting very wide timber to size according to defects (marked with fluorescent chalk) and length. Technical data: - Cutting height: max. 120 mm - Feed length: max. 5,500 mm Godpfx Aezryvaskyjkc - Cutting width: max. 700 mm - Saw blade diameter: max. 700 mm

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 201, saw blade diameter: 800 mm, cutting height (max.): 300 mm, cutting width (max.): 550 mm, total length: 2,000 mm, overall weight: 1,000 kg, total width: 2,300 mm, total height: 2,000 mm, working height: 940 mm, input voltage: 400 V, saw drive: 11,000 W, saw blade bore: 40 mm, operating pressure: 8 bar, Ideal cross-cut saw for the timber trade or sawmills. Solid and robust machine, well suited for beams and laminated beams, for packaged goods but also individual pieces. Gsdpfxeudwzcj Akyekc Can be integrated into a cantilever rack due to its compact frame construction. Saw blade emerges from below, stably guided. Safe two-handed operation with large protective hood. Entire machine virtually maintenance-free. Pneumatic clamping cylinders right and left. Completely workshop-tested and ready for use. Saw blade included.

Condition: new, functionality: fully functional, total length: 1,385 mm, total width: 2,900 mm, total height: 2,150 mm, type of input current: three-phase, saw blade speed: 150 rpm, pivoting range: 45 °, input voltage: 400 V, overall weight: 1,600 kg, cutting range round steel at 45°: 320 mm, cutting range round steel at 90°: 320 mm, warranty duration: 12 months, cutting range square steel at 45°: 320 mm, Equipment: rotational speed infinitely variable, Advantages of the miter bandsaw HBE320-523G Sensitive Behringer cutting pressure control increases cutting performance when sawing tubes and profiles, as it automatically adjusts the saw feed of the machine to the changing material cross-sections. Due to its arrangement directly on the back of the saw band, the system regulates quickly and precisely. Precise guide system in portal design The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best miter cuts and maximum service life of the miter bandsaw. Micro-spray system When sawing profiles, tubes and solid material, the standard minimal quantity lubrication system delivers the best results. The saw band is constantly wetted with cutting oil via two nozzles. This guarantees a long service life of the saw band and a clean working environment. 3° inclination of the saw band Gksdpsz Rzugefx Akyec enables higher cutting performance when sawing hollow profiles and beams and reduces burr formation. Customer-oriented sawing concepts Behringer offers complete system concepts with individual transport solutions, where everything fits together perfectly. We are a competent partner and provide comprehensive advice. Closed material table The closed table support facilitates work with the miter bandsaw. Even short sections can be easily transported in and out of the machine. Band-guiding parts made of cast iron are made by Behringer and ensure vibration damping directly at the cutting point, thus increasing the tool life. Automatic guide arm adjustment Optimal sawing result without adjustment effort - even with frequently changing material widths. Feed control with servo drive optional Optionally, the saw feed is carried out by means of a ball screw and servo motor. This results in significantly shorter non-productive times and more precise saw feeds. Electrically driven chip brush with BEHRINGER quick-change system for tool-free brush change. The special engagement angle protects the teeth of the saw band. Energy-efficient drive system More output with lower energy consumption. Protects the environment and your wallet.

Condition: used, OMGA T421 IDC000097 Gedpfeu Dhupox Akyskc - saw blade diameter: 400 mm - complete with saw dust filter

Condition: used, Year of construction: 2021, with swiveling saw blade, 45° to the right and left used in top condition low operating hours function tested partially refurbished Manufacturer: Rinaldi Type: TMA 42 AD Year of manufacture: 2021 Machine no.: 215783 CE type-tested Motor kW: 1.5 pneumatic Roller table length, right: 3000 mm with electronic digital display Roller table length, left: 4000 mm Stop flaps, number: 1 2-hand safety circuit Protective guard Cutting height mm: 160 Gsdoz I Udnjpfx Akyskc Cutting width mm: 205 Blade diameter mm: 420 Dust extraction connection mm: None Space requirement approx. L x W x H mm: 800x900x1600 Weight approx. kg: 230 Total connection value approx. kW: 1.5 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected without warranty

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Godpfxei Dfids Akyjkc Machine operated via handwheel and worm gear (rear) Tilting Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available -

Year of construction: 1990, condition: used, A mobile package crosscut saw for sawn timber is offered. Guide bar length: 1200mm, guide bar type: STIHL, chassis: manually movable, control: manual. Equipped with STIHL guide bar, robust chassis with pneumatic tyres, CEE plug with cable, protective guard. Weight: approx. 250kg, overall dimensions X/Y/Z: approx. 1500mm/800mm/2500mm. Inspection by arrangement is possible. Gedpfx Aozyq Tfjkyokc

Condition: good (used), Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Godpsuiwqhjfx Akyskc Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Condition: good (used), Code: 0246 Brand: OMGA Model: TR 2B - NC - CE Standard Gsdpfxjxztyds Akyjkc Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider ----- - Pos. 1: Legend 500 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_500 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ----- Total price demonstration machine from stock 73447 Oberkochen: on request! Gjdpfjvu Hd Tox Akyekc ----- More options like longer/shorter inlet/outlet, Stop systems on re...