Used Roller Machine for sale (68,403)

Condition: good (used), Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trucks, tank rollers, machine transport rollers steering mechanism Njdpfx Ahewx Hcisvocp -Machine transport rollers: 4 tank rollers -Load capacity: 30 t (7.5t per piece) -Support height: 110 mm -Plates: 3x Ø 140 mm / 1x width 135 mm -Submission/Price: complete -Dimensions of transport case: 1005/200/H165 mm -Total weight: 57 kg.

Condition: good (used), Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trucks, tank rollers, machine transport rollers steering mechanism Ncedpjww U Nusfx Ahvsp -Machine transport rollers: Transport trolley, 4 pieces -Load capacity: 5 t per transport chassis -Rollers: Ø 77 x 70 mm -Submission/Price: complete -Steering mechanism: in stock, can be supplied for an additional charge, see ID 35935 -Dimensions each: 655/560/H95 mm -Weight: 59 kg/pc.

Year of construction: 1987, condition: used, Lifting height: 400 mm 12 speeds of the table drilling machine INTERGRENN: 210 - 2580 rpm Nodpfx Ahob Nxm Dovjcp Drive motor: 380 V, 0,75 kW space requirement: 950 x 650 x 2030 mm Weight approx.: 150 kg

Condition: new, functionality: fully functional, Sheet width: 2050 mm Nedsyvttvspfx Ahvscp Sheet thickness: 4.5 mm Bending capacity: 4.0 mm Voltage: 400 V Frequency range: 50 Hz Smallest diameter: 210 mm Roller diameter: 140 mm Total power requirement: 2.2 kW Machine weight approx.: 1565 kg Space required approx.: 3240x1200x900 mm

Condition: new, functionality: fully functional, Sheet width: 2050 mm Sheet thickness: 4.5 mm Bending: 4.0 mm Smallest diameter: 210 mm Roller diameter: 140 mm Machine weight approx.: 1530 kg Space requirement approx.: 3220x1200x900 mm Standard equipment: - Central rollers driven by electric motor, planetary gearbox and gear drive - Side-swiveling top roller - Main motor with brake device - Conical bending device - Mobile control panel and foot pedal - CE mark/Declaration of conformity Special equipment: - Motorized rear roller adjustment Nodpfx Aheyvtrrjvjcp - Digital display for rear roller - Induction-hardened rollers

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Njdox U Eiaspfx Ahvscp Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: good (used), Year of construction: 1992, working width: 1,300 mm, Double-sided glue applicator / 2-roller glue applicator Manufacturer: AMOD / Bürkle Type CDL 1300 Suitable for double-sided glue application Ncjdpfx Ahov Sa Utjvsp Working width 1300 mm With 2 new galvanized dosing bars Operating voltage 380 V 2-phase 50 Hz Control voltage 220 V Rated current 1 A Fuse protection 16 A (provided by customer) Including 2 additional glue rollers / good visual condition The machine will be technically inspected and cleaned upon order.

Condition: excellent (used), Year of construction: 1996, I sell the 1-cylinder roller coater BURKLE SAL. Working width 1300mm Very good condition. Fully working. Ncsdpfx Ast S Eb Ushvsp Available immediately.

Condition: excellent (used), I sell the 2-cylinder roller coater Superfici Elmag FVR. Working width 1400mm Njdpfx Ahsiuc R Revecp Very good condition. Fully working. Available immediately.

Condition: excellent (used), Year of construction: 1998, I sell the 1-cylinder roller coater BURKLE SAL1300. Working width 1300mm Very good condition. Fully working. Nsdpfxei Euqqs Ahvocp Available immediately.

Condition: excellent (used), Year of construction: 2002, I sell the 1-cylinder roller coater BURKLE SAS1300. Working width 1300mm Ncjdpst S D Umefx Ahvop Very good condition. Fully working. Available immediately.

Condition: used, Gietart Roller conveyor shotblasting machine Type: Roller conveyor Max. width of workpiece: 1500 mm Max. height of workpiece: 550 mm Ncsdpfoidlq Ssx Ahvop Max. workpiece weight: 600-800 kg/m

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Grinding Length/Stroke: approx. 550 mm (slide travel) Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Number of flutes: typically 1–99 pieces (depending on tool set) Grinding wheel diameter: approx. 150–300 mm Grinding wheel speed: up to about 2,700 rpm Nedpfxoxtiune Ahvocp Centre distance (workpiece spindle): typical range 400–800 mm Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V

Year of construction: 1987, condition: ready for operation (used), A three-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible. Njdoyttv Rjpfx Ahvecp

Condition: used, Year of construction: 2000, Lot consists of: (1) CNC Deep Rolling Machine Technical details: Ncjdpfx Aoym Sp Nohvsp max length 920 mm, max counterweight radius (depending on stroke and bearing width) 195 - 270 mm, max 8 main + 6 pin bearings, min/max main bearing diameter 33 - 88 mm, min/max pin bearing diameter 30 - 84 mm, max bearing width 18.5 mm, max stroke 140 mm, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 35kVA, weight 13 t.

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: 352/2015, QUICKER U ultrasonic cleaning tank for raster/anilox rollers. The tank accommodates rollers up to 410 mm (and possibly a few mm more). It has capacity for ultrasonic cleaning of two rollers at the same time and one position for rinsing. The tank is equipped with a filtration system which extends the detergent solution's usability. The set includes a complete set of adapters for adjusting to small roller widths (double adapter for the washing section and a single adapter for the rinsing section). The washing section is equipped with heaters and the solution temperature can be adjusted as needed. Ultrasonic cleaning duration is set by a mechanical timer. Basic specifications as shown in the table: Operating voltage 230V / 50Hz, ultrasonic power: 3000W. Nsdpfx Asyda Nxehvocp

Condition: new, 3-roller round bending machine ORM 2070 x 140 Technical specifications: Special equipment included in the price: motorized bottom roller adjustment hardened rolls motorised rear roller adjustment Digital display Ncodpfx Asfig Apjhvop Plate width 2070 mm Sheet thickness 5.0 mm max. Bend sheet thickness 4.0 mm Roll length 2070 mm Roller diameter 140 mm Weight 1730 kg Dimensions L-W-H 3230 x 880 x 1100 mm Engine: 2.2 KW Equipment: upper and lower roller electrically driven Upper roller swivels out Conical bending device asymmetrical roller arrangement self-braking main engine sep. control and operating panel Safety leash CE mark

Condition: excellent (used), Year of construction: 2006, I sell the roller coater Cefla Sorbini Smartcoater M. Year 2006 Working width 1300mm Ncedpsg D Uuijfx Ahvsp Suitable for wet on wet, stains, primers and sealers coating application. Very good condition. Fully working. Available immediately.

Condition: excellent (used), Year of construction: 1998, I sell the roller coater Cefla Sorbini Smartcoater T/20-MF. Year 1998 Working width 1300mm Suitable for wet on wet, stains, primers and sealers coating application. Very good condition. Fully working. Available immediately. Nodpfxjynvwyj Ahvscp

Condition: excellent (used), Year of construction: 2001, I sell the roller coater Cefla Sorbini Smartcoater T/20-MF. Year 2001 Working width 1300mm Suitable for wet on wet, stains, primers and sealers coating application. Very good condition. Fully working. Ncjdpfxswink No Ahvjp Available immediately.

Year of construction: 2015, condition: ready for operation (used), A surface roller coating machine Trivec including a custom-built distributing unit with 6 units for oil and varnish application is available. Working width coating machine/distributing unit: 450mm/350mm, coating and metering stations: 2, feed rate: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/700mm/1650mm. An on-site inspection is possible. Ncodpoynltdefx Ahvsp

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, All transporter made by Cefla. Working width for all transporter are 1 400 mm.. All transporter with speed variator. Roller transporter TN 4600 Roller transporter TN 2000 Conveyer transporter TN 5000 Conveyer transporter TN 5000 Conveyer transporter TN 4500 Roller and cross transporter GT 180/4500/3600/C3 Roller and cross transporter GT 180/4500/3600/C3 Conveyer transporter TN 11600 Nedpfxsymfu Ej Ahvecp All transporter in very good condition. Coming form factory close down. Located in Norway. Please contact Rekman Maskin & Service for more information. The Cefla TN series is an industrial conveyor system manufactured by Cefla Finishing, primarily used for the automated transport of workpieces within coating and painting lines. These units are frequently integrated into larger finishing setups to move panels or furniture components between spray machines, drying ovens, and loading/unloading stations.

Condition: new, Year of construction: 2025, functionality: fully functional, number of straightening rollers: 3, product height (max.): 1,300 mm, total length: 1,700 mm, total height: 980 mm, total width: 600 mm, working width: 1,300 mm, product width (max.): 1,300 mm, overall weight: 160 kg, warranty duration: 24 months, power: 1.5 kW (2.04 HP), actuation type: electric, W11G – maximum material thickness 1.5 mm, with gearbox Ncjdpfsymc Szox Ahvop

Condition: new, Year of construction: 2026, functionality: fully functional, Key Features Reinforced construction – A rigid, heavy frame minimizes vibrations and ensures stability even under intensive use. Accurate sanding thickness adjustment – A mechanical height gauge allows precise setting of the desired processing depth. Precisely balanced sanding drum – Made of drawn aluminum, it ensures even contact with the material and effective cooling during operation. Versatile application – Suitable for removing old paint, lacquer, rust, as well as for smoothing and deburring. Durable metal drive coupling – Reliable torque transfer from the motor to the sanding drum. Working width up to 920 mm – Ability to sand wide panels in two passes. Construction and Technology The Cormak MM3146 stands out with its robust, industrial-grade design. The main motor, rated at 1.5 / 2.2 kW (S1/S6), combined with a reinforced 60 W feed motor, provides ample power for demanding and continuous operations. The variable-speed feed system (0–4 m/min) allows for adjustment to material type and desired finish quality. The sanding belt (2100 × 75 mm) is driven by a high-speed drum (2800 rpm), allowing for quick and effective material removal. The sanding drum is self-cooling during operation, eliminating overheating issues. A reinforced side guide enhances parallelism and stability across the entire working width. Precision and Efficiency The Cormak MM3146 drum belt sander ensures consistent results thanks to its mechanical height adjustment system with a precision scale. It supports a minimum workpiece thickness of 3.5 mm and a maximum working height of 100 mm, allowing both thin boards and thick construction components to be processed. A working width of 460 mm in a single pass (or 920 mm with dual-feed operation) provides flexibility for both small and large batch production. Applications The Cormak MM3146 through-feed sander is suitable for use in: Joinery and furniture manufacturing workshops Wood restoration studios Metalworking shops for deburring Production of plastic components Surface finishing lines for flat materials Standard Equipment Precision aluminum sanding drum Metal drum drive coupling Worktable: 460 × 465 mm Conveyor belt: 1120 × 450 mm Thickness gauge with precise scale Reinforced side guide Ø62 mm dust extraction port Optional Accessories Nsdjw Hb D Dspfx Ahvscp Dust extraction system with chip separator Sets of sanding belts in various grits Infeed roller table Mobile base with brake Choose performance and professional surface finishing. The Cormak MM3146 400V drum sander is a reliable partner for both batch and one-off production – choose quality that delivers efficiency. Technical Specifications Parameter Value Motor Power S1/S6 1.5 / 2.2 kW, 400V Belt Speed 2800 rpm (for wood and metal) Sanding Belt Size 2100 × 75 mm Feed Belt Size 1120 × 450 mm Worktable Dimensions 460 × 465 mm Dust Port Diameter Ø62 mm Feed Speed 0–4 m/min Min. Material Thickness 3.5 mm Max. Working Height 100 mm Working Width 460 (920) mm Feed Motor Power 60 W Machine Dimensions 880 × 540 × 1230 mm Net/Gross Weight 134 / 160 kg

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK MM3166P Wide Belt Sander – Durable and Reliable for Workshop or Professional Use The CORMAK MM3166P wide belt sander is a robust and dependable machine, ideal for both home workshops and professional woodworking environments. With its advanced features and solid technical specifications, it enables fast, accurate sanding of wood materials, delivering a perfect finish on every project. Key Features: Dual sanding drums ensure even and precise sanding across the workpiece. Conveyor belt system facilitates smooth material feed and consistent sanding results. Powerful motor (2200 W + 120 W) guarantees effective sanding, even on harder materials. Adjustable sanding belt speed allows you to match the speed to the type of material being processed. Dust extraction system ensures a cleaner working environment and protects the operator from inhaling fine dust. Sturdy construction guarantees long-term durability and operational stability. Voltage options: Available in both 230 V and 400 V (50 Hz) versions – choose what suits your setup. Wide sanding belt (635 mm) enables fast processing of large surface areas. Material thickness capacity: Min. 7 mm, Max. 125 mm. Sanding drum diameter: 150 mm. Sanding belt speed: 14 m/s. Two dust extraction ports (100 mm diameter) for easy connection to dust extraction systems. Technical Specifications: Parameter Value Belt length 800 mm Belt width 635 mm Roller radius R 120 Max. workpiece thickness 130 mm Main motor power 2.2 kW Voltage 400 V Frequency 50 Hz Motor speed (at 220 V) 1800 RPM Feed motor power 120 W Feed speed 1.8 – 7.3 m/min Dust port diameter 100 mm (x2) Net / Gross weight 220 / 260 kg Machine height 1113 mm Machine width (side view) 1100 mm Machine width (top view) 1060 mm Drum length 635 mm Nedsxfhh Dspfx Ahvocp Manufacturer: Cormak