Used Cross Cutter for sale (10,221)

Condition: like new (used), Year of construction: 2021, Stegherr KSF-mini Cross Bar Milling Machine A video of the machine in operation can be sent upon request. For manufacturing cross bar joints in window or furniture construction. All three machining steps are performed in a single clamping: 1. Milling the upper mitre by moving the milling unit to the rear 2. Sawing the web by swiveling the clamped workpiece 3. Milling the lower mitre by moving the milling unit forward Maximum workpiece cross-section: 56 x 46 mm Pneumatic foot switch for clamping the workpieces Iedpfx Adowkvg Uonoa Stop ruler with optical reading Milling head with indexable inserts 3 saw blades included Total connected load 400V / 3.3kW (Saw motor 2.2kW, Milling motor 1.1kW) Extraction port: 100 mm Machine in original paint, only used for demonstrations so far. Included in delivery: • On-board tools • Operating manual • CE marking Dimensions approx. 1400 x 700 x 1400 mm (LxWxH). Weight approx. 200 kg. The machine can be demonstrated in our facility by appointment. We only offer machines that are ready for demonstration and available in our warehouse; see "Other offers from this supplier."

Condition: used, Year of construction: 1996, fence ja ja /nein dimensions of machine 1000x1000x1300 mm Weight 800 kg Iodpfxsxq Hiqe Adnea

Condition: good (used), Thickness gauge, coating thickness gauge, Cross Hatch Cutter Isdpfx Ajr H Nlhsdnja -Manufacturer: Elcometer, cross-cut device with case -Type: Elcometer 107 -Material: stainless steel / aluminum -Accessories: see photos -Dimensions: 300/270/H75mm -Weight: 1.1 kg

Condition: used, Number of milling spindles 2 St. fence 1 St. workpiece ja yes STEGHERR Cross rung milling machine, Type KSF-mini ----- Including stop ruler with measuring scale and sliding stop. Tools included. Specialized jointer for the efficient production of cross-mustard joints. The KSF-mini cross-mustard jointer is the product of STEGHERR's extensive experience in building these specialized jointers for cross-mustard joints. With the KSF-mini, all common cross-mustard joints can be produced quickly and precisely. Even profiled joints can be machined on the KSF-mini. Precise routing is achieved because the workpiece is machined on three sides in a single clamping operation. The tool is driven by two three-phase motors; the workpieces are clamped pneumatically. The profile cutter is designed for the joint width. The saw blades that perform the flattening can be adjusted to the dimensions of the profile cutter using spacers. The machine is designed for a maximum workpiece cross-section of 56 x 46 mm. Motor: 2.2 kW, 380 V, 50 Hz Pneumatic pressure: 6 bar Included: ----- Table base Foot switch Tools as shown in the pictures: 1 profile cutter 3 saw blades (corresponds to a 10 mm web width) Fence ruler with measuring scale and sliding stop as shown in the pictures. Ijdpfx Adswi Upfjnoa Installation dimensions approx. L x W x H: 1,330 x 570 x 1,430 mm Weight: approx. 150 kg (All technical specifications according to the manufacturer, without guarantee!)

Condition: used, Year of construction: 1994, For processing blank paper or with print mark reader (automatic register control) Maximum unwind diameter: 1,500 mm Core diameter: 70 mm / 152 mm Maximum cutting speed: 250 m/min (with 80 g/m² paper) Formats: A3, A4 Maximum web width: 500 mm Iedpfew R Uqdsx Adnja Minimum web width: 250 mm Paper grammages: 60 g/m² - 170 g/m² Maximum delivery belt stacking height: 100 mm Control system: Siemens Simatic S5 Technical specifications as per user (without guarantee)

Condition: as good as new (ex-display), Year of construction: 2019, 380 V Ijdpfetgkwfox Adnea Pneumatic

Condition: ready for operation (used), Cross Bar Milling Machine Manufacturer: Stegherr Model: KSF Suitable for milling cross bar joints, e.g., in windows, doors, and furniture Equipped with 3 milling units An upper and a lower milling unit simultaneously mill the two mitre-like cut-outs A third unit simultaneously performs the flattening The machine table is moved pneumatically-hydraulically. The forward and return speeds are adjustable. With foot switch 2 motors, each approx. 2.2 kW Total connected load approx. 4.5 kW Compressed air 6 bar Voltage 380 V 50 Hz Iodpfx Aew Imhcsdnea Extraction connection diameter 180 mm Incl. 3 milling tools

Condition: used, Year of construction: 2003, The machine is in perfect working condition. Isdpogrn Emofx Adnja

Condition: new, Hiwell cut-28 2020 Brand new 2020 model Hiwell portioning machine, contact us for a demo. For years Hiwell has been developing a portion-cutter with the Cut-28II as a result. Very accurate fixed weight or fixed size portion cutting with the accuracy and consistency of it’s European rivals. Isdpfofg U Hfox Adnsa This machine is capable of portioning meat, fish and poultry up to a thickness of 50mm and 240mm wide. With a portioning accuracy range higher than ᐳ98%, capable of making 1000 cuts per minute. Comes with a strong modular belt that will last long. Controlled by SIEMENS electrical parts, with CE approved safety protection. HACCP standard easy operation, low maintenance cost. General information Model CUT28-IV Belt width 254mm Belt speed 5~20m/min Weight error ≤2% Cutting speed 1000 cuts/min Max. product height 50mm Max. product length 650mm Max. product width 240mm Input/Output height 1050±50mm Power 7.55kW Overall dimension 2512×1200×1680mm

Condition: reconditioned (used), CUTTER Model: SWV 330-S Vacuum TIPPER TIE 2007/2008 - MACHINE AFTER GENERAL OVERHAUL THIS IS THE MODEL - TIPPER TIE ALPINA AG WITH A NEW CONTROLLER - ALL SPARE PARTS ARE AVAILABLE FOR THIS MODEL. Height: 2250 mm Width: 3300 mm Length: 2800 mm Capacity: 330 l Bowl construction - stainless steel Knife construction - stainless steel Electric power supply: 400V 50Hz 3N Total power: 141 KW Isdpfx Ast Sv Uljdnoa - Knife rotation: 540/960/1930/2880/3850/4050.-smooth adjustment - Bowl rotation: 3.5 / 6.5 / 10 / 13.5 - Mixing speed: -70/120 - bowl rotates to the left - Power: 141 kW - Weight approx. 7800 kg - Number of knives – 6 pcs. - THE MACHINE HAS A 3-MONTH WARRANTY ON MECHANICAL PARTS

Condition: refurbished (used), Year of construction: 2009, Rex stainless steel bowl cutter Ijdpfot Da Elsx Adnja Capacity 125 litres With unloader arm and disc 2 speed knife shaft 1,500 / 3000 rpm 3 speed bowl Safety interlocked lid Currently being refurbished

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Equipment model: NS56FG Maximum tubelength: Ijdpfx Aeww Umasdnsa

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Isdpfxjfv Hphe Adnea Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: used, Bertuetti Universal Dough Cutter. In working condition. With two dusters. Belt 400mm wide One additional cutter included. Needs a coat of paint. Iedjtpvt Tspfx Adnsa

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. Ijdpfx Adou Tg I Denea This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: like new (used), Range (in depending on the lighting conditions) until: 15 m Range with laser receiver: 30 m, & more 5 m: leveling accuracy +/-1 mm Self leveling range: 4° +-0,5 ° Accuracy of the horizontal line at 5 m: +-1.5 mm Accuracy of vertical line at 3 m +-0.75 mm Number of laser lines: 2 Weight: 485 g Isdpfxsd Ecncs Adnea

Condition: good (used), Year of construction: 2002, machine/vehicle number: Egli V1, Make : EGLI Model : V1 Ijdpjfmgv Hefx Adnea Usage : Frozen Block cutter for butter and similar products High speed Cutter Electrics : 3~ / 400 v/50hz Air : 6 bar -8bar Safety Door with air operated actuator The machine is used by adding in the butter blocks and the door closes automatically, the piston applies pressure to the block pushing this towards the cutting divide that rotates at high speed . The butter pieces are dropped below the machine into stainelsss steel hopper or silo .

Condition: new, functionality: fully functional, Year of construction: 2025, table width: 4,120 mm, working width: 2,530 mm, travel distance Y-axis: 6,020 mm, travel distance Z-axis: 450 mm, type of input current: three-phase, overall weight: 14,200 kg, warranty duration: 24 months, working range: 6,225 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, All New Full Cover Fiber Laser Cutting Machine | GS-CE PRO Series | 6000-40000W MACHINE AVAILABLE ON HAND This GS-CE series FULL COVER FIBER LASER CUTTING MACHINE offers maximum safety for metals cutting. Thanks to its full cover structure and protective glass observation window, you can observe the operation and avoid hazards such as laser radiation, sparks, etc. It also has a fast exchange table, and the exchange is within 10s. It will be your ideal solution for safe and efficient metal cutting! Working platform size: 3000mm*1500mm, 4000mm*2000mm, 6000mm*2000mm, 6000mm*2500mm;8000mm*2500mm;12000mm*2500mm; Laser power 6KW-40KW GS-6225CE PRO Max. Acceleration：3G Intelligent anti-collision function Automatic lubrication Laser fault alarm Ijdpfx Adevzwh Nonoa Cooling fault alarm Laser protection glass Water cooler TÜV CE certificate Optional function: automatic loading and unloading system Control unit supports graphic formats: AI, BMP, Dst, Dwg, DXF, DXP External programming System complete incl. cooler, extraction system and safety light barriers Demonstration machine as good as new

Condition: good (used), Corner cutter Karl Tranklein EK-100 Production Germany. Very good condition. This is a professional, production device for rounding corners. Solid cast iron construction, strong pressure ensure precision of operation. Replaceable knives. Adjustable margins. One set of knives included. Stack height 100mm Weight 130kg Efficiency 50 cycles/min Power supply 400V Waste is directed to containers. Isdowunm Uspfx Adnoa This is the currently produced model.

Condition: excellent (used), Year of construction: 2019, The machine is in very good condition – the latest model is designed for poultry slaughter and initial processing, ensuring a capacity of 13,500 birds per hour. Technical Specification Model: 20x6" Capacity: 13,500 birds/hour Live weight: 1.2-4.0 kg Number of units: 20 Shackle pitch: 6" Length (X): 2508 mm Height (Y): 2985 mm Width (Z1): 1693 mm Iebttsv Au Nge Shdfoar Width (Z2): 3092 mm Width (Z3): 2580 mm Weight: 1535 kg Isdpjwdic Aofx Adnoa Water consumption: 1.0 m³/h Water connection: High pressure: 40 bar; Medium pressure: 8 bar; Low pressure: 2-3 bar Water inlet: 3/8" BSP Drain connection: DN100 BSP

Condition: new, Mobile lift for cutter cart Made of stainless steel Lifting weight: 200 kg Dimensions: 1160x800x2900mm Electrical power: 0.75kW Voltage: 220V 50Hz Ijdsvtzzkjpfx Adnoa

Condition: good (used), Corner cutter OMM Vicking 3 Automatic Production Italy. Perfect condition. This is a professional, production device for rounding corners. Solid cast iron construction, strong pressure ensure precision of operation. Interchangeable knives. Ijdpfewund Hex Adnea Adjustable margins. A knife with a radius of 7 mm is included. Stack height 40 mm Weight 78 kg Power supply 230 V This is the currently produced model.

Condition: new, Pillar lift for cutter cart Made of stainless steel Lifting weight: 250 kg Dimensions: 1520x1300x2740mm Electrical power: 1.1kW Ijdpfxovtz U Rj Adnea Voltage: 380V 50Hz

Condition: good (used), Double side corner cutter Very good condition. This is a professional, production device for rounding corners. Solid construction ensures precision of operation. Two trimming heads. Interchangeable knives. Adjustable margins. Controlled by foot pedal. Ijdpfjwungzox Adnoa One set of 8mm knives included Stack height approx. 80mm Weight 100kg Efficiency 20 cycles/min Compressed air supply.

Condition: new, Cutter cart Made of stainless steel Dimensions: 600x600x500mm Iedpfx Adsvt Aicensa Volume: 200 liters