Used Threaded Bolt for sale (4,125)

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, total length: 800 mm, total width: 900 mm, total height: 1,600 mm, filling weight (max.): 100,000 g, TECHNICAL DETAILS Workpieces: Press-in studs M6 x 15 Feeding capacity: 15/min (single track) Max. fill weight: 100 kg Max. fill volume: 25 dm³ MACHINE DETAILS Voltage: 230 V Cpjdpfx Aoyf A U Hoc Neu Max. power consumption: 100 VA Dimensions (L x W x H): 800 x 900 x 900 mm EQUIPMENT Linear feeder rail Transport hose Air blow nozzle Note: The workpieces, max. 100 kg or 25 dm³, are stored in the parts feeder and correctly oriented. At the end of the sorting process, the workpieces are buffered on a linear feeder rail and supplied to the singulation unit. Behind the singulation unit, a suitable transport hose and an air blow nozzle are installed. Each workpiece is transported individually through the transport hose. Possible electric interfaces include HAN connectors, bus modules and valve manifolds.

Condition: excellent (used), thread dia. 36 mm Cpsdpfeyhq S Eox Ac Neu

Condition: good (used), Year of construction: 1998, functionality: fully functional, FOR SALE Codpfxjxv Dcxs Ac Nspu Thread rolling machines Escofier H20Z

Condition: excellent (used), max. workpiece diameter 600 mm threading length 7000 mm max. module 8 / 12 min. module 1 swival range ° diameter of hob 63 - 140 mm spindle turning speed - stepless 45 - 450 U/min weight of the machine ca. 12,5 t dimensions of the machine ca. 9,0 x 2,0 x 2,2 m Condition: In good condition, checked and partially overhauled by a specialist. The existing milling head was replaced by an overhauled universal milling head. Furnishing: Differential for inclined machining Automatic indexing device (indexing discs changeable!) For multi-wedge, multi-thread parts, then extensive bushings, support rollers and around 70 Change gears. Cpjdpfx Acswgizde Nju Conversion of the milling head speed to a frequency converter with corresponding powerful motor is a great thing and saves a lot of set-up time. Equipment: Around 70 change gears, 3 bushing sticks of different sizes, around 20 Bushings, 2 roller mountings, 2 tips for direct mounting on the Clamping spindle, 350 mm chuck, 2 spare part disks.

Condition: good (used), Year of construction: 2016, Internal item no.: 26001 Taxed under the differential taxation scheme according to §25a German VAT Act. You will receive a proper invoice, but VAT is not separately shown. You are welcome to inspect the machine under power in a heated warehouse area of over 500 m². Column Drilling Machine Cpodeygvtxspfx Ac Nsu Geldmacher DP25 Year of manufacture: 2016 + Thread cutting function + Infinitely variable speed (150 - 3000 rpm) + Coolant pump + Emergency stop / safety cover with switch (UVV compliant) Dimensions (approx.): 90 x 65 x 185 cm Weight: approx. 350 kg The machine comes from an educational institution and is in well-maintained condition.

Condition: ready for operation (used), functionality: fully functional, SASPI GV4-30 Min / max threaded diameter M4 / M14 Min / max threaded length 10-150 mm Motor power (ca) 32 kW Cpodpfxsw Uhrij Ac Neu Production speeds (ca) 50-200 parts/min Ready for production!

Condition: good (used), functionality: fully functional, Thread cutting capacity in ST 60 M 22 Thread cutting capacity in cast iron M 27 8 speeds 180 - 1120 rpm Console version with height-adjustable head Cpedpfxjyhq Tij Ac Nsu . with - or - without ROMAI multi-spindle .

Condition: excellent (used), 1 lot thread plug gauges Cpedpfxei Dr Ako Ac Neu ca.66 pieces in one drawer Dimensions, see pictures

Condition: used, Year of construction: 1963, functionality: fully functional, BREHMER 381e A THREADING MACHINE PERFECT WORKING CONDITION, Csdeyhd S Eepfx Ac Nepu VERY GOOD MACHINE

Condition: good (used), Rolling pressure 220 kN Ø Pieces 3mm min; 70mm max Pitch 6mm max Cedpfx Aevyyyxjc Nopu Grooving pitch 2.25mm max Roller width 160mm max Ø Roller 133mm min; 170mm max Roller shaft speed 24 30 38 45 62 72 90 114 rpm Ø Roller carrier shaft 54mm standard; 69.85 special Distance between shafts 135mm min; 230mm max Working stroke 15min max Feed rate 0.5mm/s to 6mm/s Laminating time 0.1s to 100s Pause time 0.1s to 100s Main motor 5.5 Kw Electrical power consumption 8.6 Kw Tank capacity 130 L Weight approx 2100 Kg

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Centre distance: 400 mm Spindle speed: 56 rpm Chuck diameter: 160 mm Tailstock quill travel: 45 mm Tailstock taper: MK2 Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz - Right- and left-hand rotation - 3-jaw chuck - Spindle drive via geared motor Cjdpjxf Uwxsfx Ac Nepu - Without through spindle bore - Tailstock with lever quill - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition

Year of construction: 2000, condition: excellent (used), Thread cutting machine make ROTHENBERGER Cjdomn Thhepfx Ac Nepu TYPE:3S-G year of construction ca.2000 Without cutting head with pipe cutter and end burr device. Runs with V230 current. In top condition, like new.

Condition: good (used), Year of construction: 1990, Thread cutting machines with accessories Manufacturer SONE Type: 2000 . Cpedpfxjvk D Rpj Ac Nju 230V .

Condition: excellent (used), thread dia. 5 - 200 mm grinding length 500 mm thread pitch 0,25 - 6 mm clamping length max. 850 mm grinding wheel diameter 350 mm centre height 105 mm thread M2 - M149 thread - inch 3/32 - 4 inch. inclination li/re +/-10 ° total power requirement 6 kW weight of the machine ca. 3,2 t Cpsdpjwvl H Uofx Ac Nou dimensions of the machine ca. 2,5 x 1,7 x 1,5 m

Condition: used, Recently arrived WMW UPW 25 Cpodpfx Acoygm Igo Nou

Condition: used, Recently arrived WMW UPW 25 Cpedpfx Acoygm Hve Nju

Condition: used, Recently arrived WMW UPW 25 Cedpfxjygm E Eo Ac Nopu

Condition: used, Recently arrived WMW UPW 25 Cpodpfx Aoygm Efec Neu

Condition: ready for operation (used), functionality: fully functional, SASPI GV3-20 Threaded diameter M4-M12 Shaft length under head 150 mm Max threaded length 130 mm Production rate 85-220 parts/min weight 4400 kg motor power 14 KW Cpjdoxv Si Tspfx Ac Nju Condition is very good, ready for production

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 620050039, Thread Rolling Machine PeeWee Type P20SR Very good condition, well-maintained, few operating hours, fully functional. Can be inspected and tested under power. Csdpfx Aceygltzj Njpu Forklift loading included. Includes operating manual and wiring diagram. Includes 20 sets (40 pieces) of thread rolls (new price per set approx. 1,100 euros). Available thread rolls for: M5x0.8 M6x1 M8x1.25 M8x1.25 special material M8x1 M10x1.5 M12x1.5 M14x1 M14x1.5 M16x1.5 M18x1.5 special material M20x1.5 M22x1.5 M24x1.5 M30x1.5 G1" 11 threads TR14x3 left-hand Sheet metal thread 4.2x1.4 Smoothing rolls 3/4" 16UNF

Condition: good (used), Year of construction: 1998, Offer 20137 Technical data: - 3 stationary, positionable thread tapping machines - Tapping capacity for each up to approx. M 12 Cpodpfxsygh Iuj Ac Nju - Tapping depth approx. 75 mm - Steplessly adjustable drilling feed - Spindle speeds up to 490 rpm - Pneumatic connection 6 bar - Drive 400 V - Required space approx. W 2000 x H 1600 x D 900 mm - Weight approx. 150 kg

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm thread pitch 0,3 - 100 mm spindle turning speed range 72 / 1700 - 2540 U/min relief of the tap 0,03 - 8 mm clamping length max. 1190 mm Cpodpsyb S Riefx Ac Nsu max. module 10 workpiece turning speeds 0,4 - 160 U/min total power requirement 13 kW weight of the machine ca. 7,4 t dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Many accessories.

Condition: excellent (used), thread dia. 10 - 150 mm Cpsdpfeyb S N Sjx Ac Nju grinding length 900 mm thread pitch max. 3 mm workpiece diameter max. 260 / 340 mm threading length max. 50 mm centre distance 1200 mm centre height 1100 mm grinding wheel diameter 275 - 400 mm grinding wheel width 14/20/30/40/50 grinding head-swivable, cross 4 re / 1 li ° max. stroke of grinding wheel 140 mm peripheral speed max. 35 m/sec total power requirement 14 kW weight of the machine ca. 5,8 t dimensions of the machine ca. 5,0 x 2,0 x 2,1 m

Condition: used, 2 machines available Rolling pressure 160 kN Ø Parts 3mm min; Ø 50mm max Pitch 5.5mm max Flute pitch 2mm max Roll width 100mm max Roll Ø 133mm min; 165mm max Roller shafts speed 32 40 51 59 81 95 118 150 rpm Ø roller shaft Ø 54mm standard; 69.85mm special Distance between axles 135mm min; 205mm max Working stroke 15min max Feed rate from 0.5mm/s up to 6mm/s Cpedpfxjyftq Es Ac Nsu Rolling time from 0.1s to 100s Pause time 0.1s to 100s Inclination of roll-holding shafts +/- 5º. Main motor 5.5 Kw Power consumption 7 Kw Tank capacity 130 L Approx. weight 1700 Kg Accessories: thread rolls, 5 pairs for the 2 machines workpiece holders and guiding

Condition: used, Threading machine, pipe threader, Ridgid 300, used machine Manufacturer: Ridgid Type: 300 Cjdpfx Aeybbamoc Njpu Overall dimensions: Width: 1180 mm Depth: 1250 mm Height: 1500 mm Electrical data: 230V Functions: Thread cutting, cutting to length, deburring