Used Hydraulic Wedge for sale (16,916)

Condition: good (used), Year of construction: 1972, functionality: fully functional, Drawing slide force: approx. 800 Mp Blank holder force (die cushion): 320 Mp Drawing slide stroke: 900 mm Blank holder stroke (die cushion): 400 mm Maximum distance between table and slide: 1920 mm Table size: 3200 x 2000 mm Chedpfe Ah Squox Aiijd Clear opening on the loading side: 3250 mm Table height above floor level: 400 mm Overall height above floor level: 6300 mm Drive power: 100 hp Machine weight: 153 tons

Condition: excellent (used), FOR SALE – INDUSTRIAL HYDRAULIC PRESS, SACK & KIESSELBACH Selling a SACK & KIESSELBACH hydraulic press, workshop identification number AE 7417. Codpo Aggbujfx Aiiehd This is a robustly built machine, equipped with: • Work table with wedges and support pieces, as seen in the photos. • Control panel with analog gauges. • Separate hydraulic unit with a Siemens motor. • Protective housing around the work area.

Condition: good (used), Year of construction: 1982, functionality: fully functional, Hydraulic Try-Out Press (Four-Column Press) Pressing force: 3.000 kN Maximum slide stroke: 1,200 mm Table size: 2.600 x 1.300 mm Distance between columns: 2.050 mm (long side), 700 mm (short side) Maximum daylight (clamping surface to slide): 1.350 mm Chodpo Ah Sk Iefx Aiisd Minimum shut height: 250 mm Stroke speeds: Rapid traverse (downward): 140 mm/sec Rapid traverse (upward): 140 mm/sec Working speed: 16–50 mm/sec Operating pressure: 300 bar Power requirement: 55 kW Tank capacity: 1.200 l Total weight: 55.000 kg Press height: 5.800 mm

Condition: new, Year of construction: 2026, functionality: fully functional, coil weight: 5,000 kg, coil outer diameter: 520 mm, coil inner diameter: 470 mm, warranty duration: 12 months, coil width: 1,250 mm, total height: 1,800 mm, total length: 3,000 mm, total width: 1,500 mm, type of input current: three-phase, input voltage: 380 V, overall weight: 3,000 kg, 5-ton hydraulic coil unwinder for a coil width of 1250 mm, equipped with a remote control unit. Chsdpfxe Afdp Io Aiiod

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 1,500 mm, overall weight: 1,145 kg, No minimum price – guaranteed sale to the highest bidder! The press is in new condition and has not yet been used! TECHNICAL DETAILS Press force: 100 t Chedps Af Hd Ujfx Aiiod Stroke: max. 380 mm Table width: 1,500 mm Height adjustment: 1,000 mm Ram speed: 10 mm/s Column spacing: 1,500 mm MACHINE DETAILS Press type: Single-acting Drive system: Conventional Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 2,100 mm Net weight: 1,145 kg Number of transport packages: 1 EQUIPMENT CE marking CE certificate Documentation

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH hydraulic boom crusher, also known as a hydraulic rock crusher, is designed to deliver superior performance in demanding work environments such as quarries, mining operations, and recycling facilities. With its high impact force, it easily breaks down large-sized rocks and stones, making them suitable for the crushing line. This system allows large materials entering the crusher's bunker, especially in the initial crushing stage, to be reduced in size without direct human intervention. The hydraulic boom system, which can be controlled remotely, offers the operator maximum safety, comfort, and control. Vibration and noise levels are kept to a minimum, protecting both the operator and the equipment's lifespan. Thanks to its high-quality material structure, the CONSTMACH hydraulic boom crusher maintains its durability for many years and stands out with its easy maintenance and integration with different crushing systems. This system is an excellent solution for businesses seeking efficient, economical, and safe crushing. Hydraulic Boom Crusher Technical Specifications Crusher: CHB400 Weight: 350 kg Equipment Diameter: 68 mm Pressure and Flow Rate: 100-150 bar / 50-80 liters Installation Area: 700 m² Boom System Specifications Working Angle: 360° Maximum Reach Area: 9000 mm Material: S355J2 Motor Power: 18.5 kW Control Type: Radio-controlled and manual valve control Filters: OMT 25 microns Hoses: (R2) Bezek Why Choose CONSTMACH Hydraulic Rock Breaker? Chjdpfx Aijxqgv Doisd With years of experience in the industry, CONSTMACH prioritizes quality and safety at every stage of production. Our hydraulic rock breaker systems are designed to offer maximum efficiency and minimum maintenance costs. All parts are manufactured from high-strength steel to withstand heavy-duty conditions. Furthermore, we guarantee the uninterrupted operation of your business with our spare parts and technical service support. If you are looking for a durable, reliable, and high-performance crushing solution, the CONSTMACH hydraulic boom crusher is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Year of construction: 1980, operating hours: 12,345,678 h, functionality: fully functional, total height: 3,400 mm, input current: 32 A, total length: 2,200 mm, total width: 900 mm, overall weight: 6,000 kg, power: 32 kW (43.51 HP), input voltage: 380 V, pressing force: 200 t, clearance between the columns: 800 mm, oil tank capacity: 400 l, stroke length: 500 mm, table length: 700 mm, table height: 980 mm, table width: 800 mm, 200-ton press from Rapp&Seidt, high-speed model, with core lifting device for intermediate plates and external hydraulic unit. Heated platens (drawing cushions) with electric heating, 25 amps each, top and bottom. Platen size 550x550 mm, central ejector. The machine operates smoothly and maintains pressure. Very little oil leakage. The machine is available immediately. Chodpfxo Agvxbe Aiiod

Condition: new, functionality: fully functional, Equipment: CE marking, documentation/manual, Profi Press: Portal presses, straightening presses, and other custom-made hydraulic presses for large and specialized projects. *Do you have a large workpiece or a specific pressing application? We build the press to meet your requirements.* RHTC supplies custom-made hydraulic portal presses/straightening presses for processing large and heavy workpieces. From an extra-long work table (recently delivered a 200-ton model with a 5000 x 4500 mm table size) to multiple portals and cylinders: we discuss your application and, together with you, develop a suitable design. *Custom-made solutions for your product and process.* Depending on the application, we can customize, among other things: Chjdpj Ah El Sofx Aiied - Press force and table dimensions - Working width, free working height, and cylinder stroke - Number of portals and cylinders - Manual or motorized movement of portal and cylinder - Hydraulics, electrical design, and controls - Software for setting and storing various parameters In this way, we tailor the machine to the dimensions of your product, the required process, and the way you want to work. *From a special portal press to a larger industrial project* Our realized projects include portal presses with long and wide work tables, designs with two portals and two cylinders, and presses for pressing large shafts out of gearboxes. Even with extensive custom-made projects, the design starts with your application. We discuss the requirements, develop the design, and submit the technical drawings for your approval before production begins. *Customization across our entire machine range* Our capabilities extend beyond portal presses. You can also request custom-made solutions for other types of hydraulic presses, from small to large, from our range. We assess each project to determine which modifications are technically feasible and appropriate. This includes hydraulic workshop presses with a wider working width (including a sliding cylinder), C-frame presses for performing tests in a laboratory, production presses for compacting powder, arch presses for shipbuilding, and four-column presses for very precise pressing operations. *Discuss your project with RHTC* Send us your application, workpiece dimensions, and desired press force via the contact request in this advertisement, if known. If possible, include a drawing or photo. This will allow us to assess your request and discuss a suitable design and quote. You can also submit your request via the contact form on the RHTC website. The photos show examples of realized custom-made solutions. The design and specifications offered are determined per project.

Condition: good (used), Schon 8 LES hydraulic swing-arm clicker press The machine is in excellent condition and ready for operation. Cjdez S Uxhopfx Aiishd Ideally suited for die-cutting challenging materials; widely used in the leather goods and printing industries. Compatible with both leatherworking and bookbinding/printing dies. Capable of cutting paper, cardboard, leather, plastics, etc. Pressing force: 22 tons Power supply: 380V Table dimensions: 900 mm x 450 mm Head (striking plate) dimensions: 550 mm x 450 mm Maximum stroke: 150 mm Weight: 1200 kg Two-hand control or foot pedal operation. Equipped with an additional safety guard.

Condition: excellent (used), For sale: a set of Weber-Hydraulic hydraulic rescue tools. - Hydraulic cutter. Cedpfx Aisz Skxxjiehd - Spreader. - Hydraulic pump.

Condition: excellent (used), For sale: a set of Weber-Hydraulic hydraulic rescue tools. Chjdpfx Aoz Skypsiiod - Hydraulic cutter. - Spreader. - Hydraulic pump.

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,147 h, Hydraulic plate shear Manufacturer: Baykal Model: HGL 3106 Year of manufacture: 2017 The Baykal plate shear has a very stable construction and is CE-compliant. The machine is being sold due to the closure of operations due to the owner's retirement. Technical data of the BAYKAL HGL 3106 plate shear: Maximum sheet length: 3060 mm Maximum sheet thickness: 6 mm Maximum stroke rate: 20/min Cutting angle: 1.6° Back gauge stroke: 750 mm Motor power: 11 kW Hydraulic pressure: 200 bar Oil tank capacity: 160 l Emergency stop Foot pedal Power connection: 3×400 V; 50 Hz Overall dimensions (L x W x H): 3860 x 2560 x 1560 mm Chsds Ahwb Hspfx Aiied Total weight of the HGL 3106 machine: 5500 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 400 h, table height: 770 mm, back gauge: 1,000 mm, back gauge travel distance Z-axis: 750 mm, overall weight: 4,500 kg, total length: 3,640 mm, total width: 2,550 mm, total height: 1,575 mm, Equipment: CE marking, angle stop, documentation/manual, finger protection, type plate available, Very well-maintained hydraulic plate shear Haco TSX 3006 with only a few operating hours. Manufacturer: Haco Type: TSX 3006 Year of manufacture: 2018 (acquired: 2019) Operating hours: approx. 400 h Cutting length: 3,050 mm Sheet thickness: 6 mm Cutting angle adjustment: 0.5 - 3 degrees Clamps: 18 pieces Length of back gauge: 1,000 mm Motor power: 7.5 kW Cedpfx Aie Ahq Atjiohd Dimensions (L x W x H): 3640 x 2550 x 1575 mm Weight: approx. 4.5 t - Control system: SC 100 T touchscreen control - Blade gap adjustment: Automatic - Rake angle adjustment: Automatic - Safety equipment: Type II finger protection with moulding, CE certified - Light curtain system and safety fences included A suitable material trolley for collecting the finished sheets is included in the scope of supply. We will gladly send you a video of the machine upon request. The machine can, of course, be inspected while powered on and thoroughly tested. The sale is to commercial businesses, excluding any warranty for defects. No guarantee, warranty, or right of return. Net price.

Condition: ready for operation (used), Year of construction: 1968, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Exner Type: HA SP-340 SS Year of manufacture: 1968 Machine number: 1 Codj Adu Ulepfx Aiiehd PRESS DATA Press force: approx. 34 t Table dimensions: 1,000 × 800 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 2,000 mm Height: 3,200 mm Weight: 8,000 kg

Condition: good (used), For sale: a complete set of Weber-Hydraulik hydraulic rescue tools. The set includes a SP-40 hydraulic power unit, cutters, and a spreader. The entire set is mounted on a metal transport frame and equipped with reels containing hoses. The set has been inspected and is in 100% working order. The visual condition and detailed scope of equipment are shown in the photos. Data read from the nameplates: Power unit manufacturer: Weber-Hydraulik Power unit type: SP-40 TÜV marking: SP32-95-TP18/SP30 Engine: ATB AKF 90S/2F-12R Codpfxsz Skyie Aiiehd Engine power supply: 230 V, 50 Hz Engine power: 1.3 kW Rotational speed: 2760 rpm Engine protection rating: IP54

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press Chedpjz Rk Nyofx Aiijd This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Manufacturer: Gantenbein, Switzerland

Year of construction: 2022, condition: used, Max. cutting capacity: 3100mm cutting length with a max. sheet thickness of 6mm and a tensile strength of up to 450N/mm². Stroke rate: 10-45strokes/min. Ram stroke max.: 210mm. Working pressure max.: 18MPa. Blade clearance: 0.05-0.60mm. Cutting angle: 0.5-3°. Backgauge range: 10-750mm. Equipped with a backgauge and front sheet supports with rollers. Overall dimensions X/Y/Z: approx. 4045mm/3770mm/1750mm. Inspection possible by prior arrangement. Chsdpfx As Ah Txwjiied

Condition: used, sheet width 3100 mm plate thickness 6 mm distance between columns 3120 mm total power requirement 11 kW weight of the machine ca. 5,3 t dimensions of the machine ca. 3,8 x 2,4 x 1,7 m Equipment: - Robust electro-hydraulic swing-beam shear - ELGO digital display (model P9521) for the electric backgauge - Backgauge travel range (X-axis) = 1120 mm - Backlash-free recirculating ball screw for the backgauge - Positioning speed: 100 mm/sec - 1x sturdy side gauge - Equipped with T-slot, flip-stop, and millimeter scale - 2x sturdy front support arms - Electric cutting length limitation - Cutting length limitation feature to increase the number of strokes per minute - Manual blade gap adjustment Cedpfxe Ah T Uwo Aiishd - Centrally operated from the right-hand side frame - Front support plates - Front finger guard/safety barrier - Jog mode (inching) via push-buttons on the left-hand control panel - Protective fencing (safety enclosure) behind the machine - Light curtain - Pneumatic sheet support device

Condition: good (used), Year of construction: 1980, overall weight: 18,000 kg, Used plate shear from Safan Type: VS 620 4 Capacity: 6200 x 4 mm Electric back gauge Manually adjustable cutting clearance and cutting angle Equipped with a pneumatic hold-down table at the rear Cedo Ahwpgopfx Aiishd Includes a square guide

Condition: used, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 100 t Machine weight: approx. 5.7 t Stroke and operating data Cjdpfx Aio Acgcfjiohd Stroke: 0–500 mm Overhang: 310 mm Installation height: 1,130 mm The installation height is specified with the stroke in the upper position. Table and ram Table surface: 800 × 650 mm Ram surface: 800 × 600 mm Through-hole in the table: 355 mm Table height above the floor: 800 mm Safety data Safety distance: 270 mm Follow-up measurement: 135 m/s Follow-up travel: 44 mm Dimensions Length: approx. 1.2 m Width: approx. 2.0 m Height: approx. 3.67 m EQUIPMENT Conversion to comply with new safety regulations

Condition: like new (used), Year of construction: 1988, machine/vehicle number: 2240 & 2250, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 150 t, stroke length: 180 mm, operating speed: 12 mm/s, reverse speed: 160 mm/s, table width: 410 mm, table length: 540 mm, clearance between the columns: 300 mm, oil tank capacity: 300 l, total length: 1,010 mm, total width: 1,130 mm, total height: 2,435 mm, overall weight: 2,600 kg, Equipment: documentation/manual, Two EXNER 150T hydraulic presses are available for immediate sale and can be viewed at our workshop in Peschadoires, central France. Both presses are in excellent condition, as shown in the attached technical specifications and photos. Operating manual and technical documentation are available for each machine. Cedj Ahq Dujpfx Aiishd Price upon request.

Condition: good (used), Year of construction: 1983, Sheet metal width: 6200 mm Chsdo Ahyvropfx Aiiod Sheet metal thickness: 8 mm Overhang: 60 mm Stand spacing: 6400 mm Cutting angle adjustment: 0.5 to 2° Total power requirement: 13 kW Machine weight (approx.): 19 t

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, Kaiser Press 50 -Exhibition machine / 0 operating hours -Electro-hydraulic drive -Operation: Foot pedals and push buttons on the control panel -Pressing force max.: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width incl. hand crank and electric unit: 1300 mm -Overall height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – working area inside: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with foot: 535 mm (can be fastened to the floor) -Support depth of the height-adjustable work table (cross member): 245 mm -Cross member adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the cross member via hand crank (no manual lifting required) -Hydraulic unit can be moved sideways: 300 mm (ball-bearing mounted in the upper guide area) -Includes 8 pressure dies with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm -6t with Ø15.7 mm -8t with Ø17.7 mm -10t with Ø19.8 mm -12t with Ø21.8 mm Chjdpfx Aioztfbweisd -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction -Includes work light to illuminate the working area -Pressure indication via pressure gauge -2 prism supports included in delivery -Automatic piston retraction -Integrated tool tray in the lower area of the press Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 290 kg Errors and omissions excepted.

Condition: used, Year of construction: 2019, LANGZAUNER LZT 70 – hydraulic veneer press, manufactured in November 2019. - Four press cylinders - Pressing force: 70 t according to the manufacturer's brochure - Press plate size: 2,500 × 1,300 mm according to the manufacturer's brochure for LZT 70 Cjdpo Ahzqwsfx Aiiehd - Electric plate heating - Connection: 3 × 400 V + N + PE, 50 Hz - Connected load: 19.3 kW according to the nameplate Collection possible from December 15, 2026, at the latest by February 28, 2027. Inspection by appointment. Disassembly, loading, and transport upon agreement. Price upon request.

Condition: good (used), Year of construction: 1988, machine/vehicle number: 802107, Offer 26307 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable, motorized 0.5 - 3° - Cutting gap adjustment by hand - Number of hydraulic clamping devices 18 pcs - Motorized rear stop 10 - 750 mm - Front angle stop + support arms - Number of strokes per minute, depending on cutting angle and cutting length 9 - 17 - Hydraulic drive 400 V / 7.5 kW - Table height 770 mm - Space requirement including rear stop, excluding front support arms approx. W 3750 x H 1600 x D 1650 mm Codozw Di Ispfx Aiiohd - Weight approx. 4500 kg - including: - Foot switch - Cutting line illumination