Used Chips Cutter for sale (7,317)

Condition: used, Stack paper cutting machine, guillotine cutter, flatbed cutter SCHNEIDER Type Senator 155 Rubber, paper and veneer shear, plastic shear, fabric shear Rubber, paper and veneer shear Machine no. 60178 Year of manufacture 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Feed height: 140 mm Back gauge: max. 1550 mm Knife drive motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Two-hand operation for blade stroke release - Automatic pressing by pressure clamp holds the paper stack on the table - Manual clamp and stroke release via foot pedal (operational) - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electrical control unit (not operational), no wiring diagrams, no user manual Itsdpodzqnyefx Affor - Back gauge adjustment via servo motor (motor, controller, and control unit present, not operational) Required space (L x W x H): 325 x 270 x 165 cm Space required for transport without disassembly: length 330 cm x width 270 cm x height 175 cm Space required for transport with disassembly: length 550 cm x width 220 cm x height 175 cm (machine + separate table) Machine: length 270 cm x width 190 cm x height 175 cm Side table: length 240 cm x width 170 cm x height 120 cm Weight of assembled machine: approx. 5000 kg (excluding the transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sale price does not include the 20 mm steel plate the machine is stored on. (Price for the steel plate: 900 EUR net)

Condition: excellent (used), Year of construction: 2018, Marel Treif Puma 700 E/EB (HS) slicer chop cutter. In superb, near new condition. Bought by a large supermarket owned factory but has been in storage for many years. I am not sure if it has ever been used. Itjdpfx Afex Dcpgjfjr

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 milling machine equipped with a 3-axis Heidenhain TNC113 active control, notable for its ease of operation. This modern version, built in 1989, features central lubrication, an electric coolant pump, and a machine lamp, among other benefits. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site at any time. Delivery time: on request Machine no.: 2102-xxxx Table: Rigid angled table or rotary-tilt-swivel table Travel (X/Y/Z): X 300 mm / Y 160 mm / Z 340 mm Quill travel: 60 mm Ijdpfx Aopy Eldeffstr Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Feed: Infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, infinitely variable feed regulation on all 3 axes, coolant unit, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines undergo thorough inspection - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - If required, you can order additional accessories such as tools, etc., directly - We can also install further equipment such as safety devices upon request - We are happy to handle shipping and/or installation

Condition: used, machine/vehicle number: 004877, Max width workable: 1300 mm Isdpfx Afswcx Ufofetr

Condition: new, Year of construction: 2025, Thickness and Surface Planer CORMAK PT310ECO with Cutter Block – Precision Machining and Work Efficiency The CORMAK PT310ECO is a modern planer‑thicknesser engineered for high-quality finish, reliability, and low noise levels. Thanks to its cutter block, it is an advanced woodworking machine combining jointing and thickness functionality in a single robust structure. The stable build and powerful motor make it a versatile solution for professional woodworking—ideal for both carpentry shops and artisan workshops. Key Machine Advantages Cutter-block shaft – three HSS knives 310 × 25 × 3 mm ensure long service life, precise planing, and reduced noise. Massive work tables – cast iron construction minimizes vibration and ensures stable material feed. High power – motor rated at 2.2 kW (S1) / 2.6 kW (S6) provides consistent performance even under heavy loads. Large working area – 310 mm width and up to 180 mm thickness capacity accommodate various workpieces. Efficient chip extraction – Ø100 mm port enables seamless connection to a dust‑extraction system. Construction and Technology The PT310ECO is equipped with a 75 mm diameter cutter block that ensures smooth operation and superior durability compared to conventional knives. The planer/thicknesser features cast‑iron tables sized 1290 × 310 mm (surface planer) and 540 × 310 mm (thicknesser), both highly wear‑resistant. Additionally, the machine offers fence angle adjustment from 90° to 45°, enabling precise angled milling. Precision and Performance Maximum planing depth Jointing mode: 3 mm Thicknessing mode: 4 mm Cutter-block rotational speed: 5,500 rpm Stable structure enables finishes ready for gluing, coating, or further processing. A reliable thicknesser for both serial production and smaller‑scale projects. Applications Ideal for: Professional carpentry and furniture workshops Prototyping labs and training centers Itodpjw Ab Twjfx Affor Maintenance departments in industrial plants Technical schools and vocational institutions Standard Equipment Three‑knife cutter block Cast‑iron work tables Cutter head guard Ø100 mm chip extraction port Feed‑in switch and safety shutdown Optional Equipment Mobile trolley for the machine Chip‑extraction unit Technical Data Specification Value Surface‑planing table size 1,290 × 310 mm Thicknessing table size 540 × 310 mm Cutter-block diameter 75 mm Cutter-block speed 5,500 rpm Number/dimensions of knives 3 knives / 310 × 25 × 2.5 mm Fence angle adjustment 90°–45° Chip outlet diameter 100 mm Max. thicknessing height 180 mm Max. cut depth: planing/thickness 3 mm / 4 mm Motor power (S1/S6) 2.2 kW / 2.6 kW Max. workpiece width 310 mm Gross weight 200 kg

Condition: excellent (used), Year of construction: 2025, General information Field of application: Construction Reference number: 5 Weights Empty weight: 500 kg Functional CE mark: yes Ijdpfxsq Ixt Ae Affjtr Condition Technical condition: very good Visual appearance: very good Other information Fits to following machines: 5~12ton excavator Delivery terms: CIF Working pressure: 190-210 bar Production country: KR Additional information Please contact Ö. Inalkac for more information ASH-50H is a Mini Shear with hydraulic rotation. This model is suitable for excavator 5~12 ton. ASH-50H Shear is one of the models that we have on stock in our warehouse, located in The Netherlands. Please contact us for more details. scissors, scrap shear cisaille ścinanienożyczki tijeras škare olló nůžky saks tesouras foarfece Schere žirklės ножницы forbici

Condition: like new (used), Year of construction: 2022, operating hours: 65 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness copper (max.): 30 mm, sheet thickness brass (max.): 30 mm, total width: 1,500 mm, total length: 3,000 mm, table length: 3,000 mm, working width: 1,500 mm, table width: 1,500 mm, Equipment: documentation/manual, Slightly used Swift Cut Pro 3000 with Hypertherm 125A power source. Isdpfjx E At Rjx Affetr

Condition: like new (used), The factory where we bought this from say that they never used the machine from new, it has sat in storage ever since it was delivered. Itjdpfx Aex Axa Soffer

Condition: good (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, degree of automation: semi-automatic, laser source model: Fiber, pipe diameter (max.): 230 mm, pipe length (max.): 160 mm, input frequency: 50 Hz, type of cooling: water, overall weight: 9,800 kg, total length: 13,600 mm, total width: 4,900 mm, total height: 2,550 mm, Hello, I am offering for sale a Bodor brand CNC Laser - The laser operates on oxygen and nitrogen - Automatic edge detection (Edge Seeking), centering chucks (Center Finding) - Bodor Genius T laser system with autofocus function - Control system: Bodor Thinker Itsdpsw Tictofx Affjr - Automatic lubrication, water cooling, gas-saving smooth-flow nozzles, intelligent maintenance reminders, optional BodorCloud system - Minor cosmetic damage to the control panel, but fully functional - Yaskawa SIGMA 7 servo drive - Maximum tube diameter: 230mm - Maximum tube length: 6500mm - Maximum profile size: 160x160mm - Maximum workpiece weight: 200kg, 30kg/m - Positioning accuracy: 0.05mm - Repositioning accuracy: 0.03mm - Y-axis speed: 100m/min - X-axis speed: 40m/min

Condition: good (used), Year of construction: 2010, Magurit 314 Frozen Meat Block Cutter The Magurit STARCUTTER 314 is a rotary commercial meat slicer with a power of 9.2 kW designed for medium-sized productions. It can handle most common block sizes whether the standard EURO-2 or US 60lbs blocks, reducing frozen products continuously at temperatures as low as -22°F (-30°C). Ijdpfx Aox Exizoffetr Slabs are fed through the integrated pneumatic feeding ram to the rotating cutting drum. These unique C-Cut blades can handle high volumes with ease processing up to 8 tons per hour while maintaining a high-quality cut. With a single pass through the machine, it results in smaller pieces with thicknesses between 3 and 9 mm. Manufacturer: Magurit Model: 314 Year: 2010 Capacity: Up to 4.000 kg/h Power: 9,2kW / 400V / 20A / 50Hz Cutting Area Dimensions: 410x250x650 mm Cutting Thickness: 3, 6, 9 mm Machine Dimensions LxWxH: 2.200x1.000x1.400 mm Machine Weight: 960 kg.

Condition: used, Year of construction: 2018, operating hours: 19,476 h, machine/vehicle number: A0261G0108, laser hours: 19,476 h, laser power: 4,000 W, BTH IMPORT STAL Sp. Z o.o will sell the machine Iodowf Epujpfx Affetr TRUMPF TruLaser3060 L66 + TruDisk4001 Fiber source: TruDisk4001 (4000W) Working area: 2500x6000 Working hours (h): 19476 Laser on (h): 41272 The machine is in continuous use, we invite you to come and test it.

Condition: new, Year of construction: 2025, General information Field of application: Construction Reference number: 2 Weights Empty weight: 500 kg Functional CE mark: yes Condition Itsdpoq Ixunefx Affor General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 5-12ton Delivery terms: EXW Working pressure: 190-210 bar Production country: KR Additional information Please contact Ö. Inalkac for more information ASH-52H is a Mini Scrap/ Metal Shear with hydraulic rotation and double cylinder. This model is suitable for excavator 5~12 ton. ASH-52H Shear is one of the models that we have on stock in our warehouse, located in The Netherlands. Please contact us for more details. scissors, scrap shear cisaille ścinanienożyczki tijeras škare olló ножици ψαλίδια nůžky saks tesouras foarfece Schere žirklės ножницы forbici sax

Condition: good (used), functionality: fully functional, tool type: SK 40, Cutter Wheel Holder SK40 for Lorenz 4 pcs. tool holders / cutter wheel holders / rack cutting wheel holders for cutter wheels / rack wheels / rack cutters, size SK 40, suitable for Lorenz gear shaping machines (matching tool changing device / tool holding device available in a separate offer). In good used condition: Iedpfx Aoikvwqeffjtr - 1 x Ø 31.75 x 120 for disc-type cutter wheel - 1 x Ø 44.45 x 84.5 for disc-type / bell-type cutter wheel - 1 x Ø 44.45 x 84.5 for disc-type / bell-type cutter wheel, special holder with central mounting bore Ø9.9 for auxiliary tool - 1 x MK2 for shank-type cutter wheel. Sale only as a complete package. Price / further details on request. All technical information is given subject to typing errors or mistakes. We only sell to countries within the European Community.

Condition: excellent (used), Almost in new condition, this Treif slicer can be used on boneless or bone in products. Pork loins, bacon, sirloin steaks etc. Can cut from as low as a few mm thick. Iodpfxex Awy De Affjtr

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 289.112, overall weight: 3,000 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, controller manufacturer: Beckhoff, sheet thickness (max.): 32 mm, TECHNICAL DETAILS Travel range X: 3,000 mm Travel range Y: 1,500 mm Max. sheet thickness: 32 mm Resonator type: Hypertherm Powermax 105 MACHINE DETAILS Control type: Beckhoff Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,400 x 2,200 mm Net weight: 3,000 kg Power: 16.8 kW Ijdpfx Ajx Ahiieffotr Transport packages: 1 EQUIPMENT Various accessories Spare parts Documentation available CE marking

Condition: refurbished (used), Year of construction: 2013, We have multiple Mueller Apparatebau paper cutting systems available! Itedpfx Afetwc Absfsr Paper cutters fo pin feed available. We offer all machines after complete maintenance. We mostly have model 6612 but we also have a paper cutter system type 6611. Next to that we have a lot of other Mueller modules like unwinder, collating module and folding modules etc etc! Just let us know and we have the solution!

Condition: good (used), Year of construction: 2003, Manufacturer: Seydelmann Model: K 60 Ultra Year: 2003 Capacity: 60 liter Itsdpfex Eiwyox Affjr Speed: 2 bowl speeds / 2 mixing speeds Power: 20kW / 400V / 50Hz Machine Dimensions LxWxH: 1.200x950x1.250 mm Machine Weight: 800 kg.

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels Itjdpfx Aexdh Hqeffjr • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine little used, in very good condition Equipment: – Pneumatic clutch and brake – Console – Heated plate Iodouwru Hopfx Affotr – 3 working modes: single, continuous, time-delayed opening – Centralized lubrication – Additional safety guards – Working tools – Hard pressure plate

Condition: excellent (used), Year of construction: 2022, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: M004397 M003639, type of input current: three-phase, total width: 2,770 mm, total length: 25,000 mm, For sale: a complete cutting room line with Morgan Tecnica spreading machine, purchased in 09/2022. The machinery is fully operational and ready for immediate use. It has been serviced by the manufacturer, Morgan Tecnica. The total working time of the cutter amounts to approximately 4,500 hours. The Next 2 Δ ES is a multi-layer cutting machine by MorganTecnica, designed to provide maximum reliability in terms of durability and performance for fabric cutting in mass production environments. The machine integrates several mechanical enhancements to reinforce its cutting head. Next 2 Δ ES technology ensures the highest quality of cut combined with maximum productivity, low operating costs, and a fast return on investment. Specifications of the Next 2 Δ 80 ES Cutter: - Maximum cutting thickness: 8 cm (compressed) - Maximum cutting speed: 65 m/min - Maximum cutting acceleration: 6 m/s² - Maximum positioning speed: 120 m/min Isdpfox Ebkxox Affjtr - Maximum positioning acceleration: 10 m/s² - Effective cutting window length: 170 cm - Effective cutting window width: 180 to 220 cm - Average energy consumption:

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2065-6183 FH, total height: 2,828 mm, total length: 2,930 mm, total width: 3,615 mm, workpiece weight (max.): 50 kg, spindle speed (max.): 10,500 rpm, feed length X-axis: 470 mm, feed length Y-axis: 330 mm, feed length Z-axis: 750 mm, type of input current: AC, grinding wheel diameter: 150 mm, overall weight: 6,550 kg, grinding length: 400 mm, rotational speed (max.): 9,500 rpm, grinding spindle speed: 10,000 rpm, pivoting range: 200 °, travel distance X-axis: 460 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, grinding spindle motor power: 11,500 W, power: 11.5 kW (15.64 HP), workpiece diameter (max.): 320 mm, input current: 25 A, grinding diameter: 240 mm, input frequency: 50 Hz, disc diameter: 200 mm, input voltage: 400 V, space requirement width: 3,615 mm, space requirement length: 3,850 mm, space requirement height: 2,828 mm, year of last overhaul: 2022, Equipment: rotational speed infinitely variable, CNC tool grinding machine Walter Helitronic Power FH, with cylindrical pallet loader, with 8-position wheel changer, with electrostatic mist collector, with fire extinguishing system, with oil supply pump, Walter Window Mode and Toolstudio software, Software Packages: 001,002,003,016,017,026,090,091,098,099,032, Helicone, Helidrill, Heliflute, NC-Mode, Power-IMS, Toolstudio_Standard, prepared for hydraulic unit (steadies). Isdpsx D Tm Asfx Affotr The grinding spindle (single spindle) is directly driven and equipped with an oil cooler. The hollow-shaft motor on the A-axis operates at 0-750 rpm. The C, X, Z, and A axes were overhauled in 2022. Test grinding is possible.

Condition: used, Year of construction: 2003, CNC Tool Grinding Machine Schneeberger NORMA CFG Year of manufacture: 2003 Center height: 210 mm Table length: 950 mm Table width: 310 mm Travel X-axis: 380 mm Travel Y-axis: 280 mm Travel Z-axis: 280 mm Grinding wheel diameter: 50–200 mm A-axis grinding head rotation: 360° C-axis tool rotation: 340° C-axis spindle resolution: 0.001° Tool holder: HSK 50 Grinding spindle speed, stepless: 0–9000 rpm Hydraulic unit: 6 bar Connection: 3×400 V / 50 Hz Spindle power: 7.5 kW Total power requirement: 33 kVA Machine weight: approx. 5,500 kg Machine dimensions Length: 1,930 mm Width: 1,590 mm Height: 2,250 mm Control system: GE Fanuc Series 16-M Accessories: various grinding wheel mounts and tool holders Iedpfx Aexz R T Ujffetr Max. operating current: 3×40 A No guarantee is given for the accuracy, completeness, or timeliness of the information.

Condition: refurbished (used), functionality: fully functional, For sale is a Christen AU-150 combined with the world-renowned HALLER UFS-155 – an extremely precise, compact, and versatile solution for grinding a wide range of cutting tools. This combination is renowned for the highest-precision production of corner radii, relief grinds, and complex geometries. Iedpfx Aex Dy Nwjffstr Ideal for companies requiring flexibility, speed, and repeatability without needing to invest in large CNC machines. 🔧 Key Advantages - Precise helix grinding - Ultra-fast grinding of corner radii - Perfect for small batch production, tool repairs, and custom tools - Excellent for counterbores, slots, thread tap back-off grinding, and staggered-tooth side milling cutters - Easy operation – yet extremely precise results - Very compact design - High-quality mechanics and durable components - Ideal for training: optional know-how training available 📐 Technical Highlights Christen AU-150: - Universal tool and cutter grinder - Precision guides and sensitive adjustment capabilities HALLER UFS-155: - High-precision universal tool and cutter grinder - Established for decades for its accuracy and stability - Perfect for slots, face geometries, and peripheral grinding applications This combination offers versatility otherwise found only in significantly more expensive CNC solutions. 🧰 Accessories: - Clamping devices - Grinding wheels - Operating manuals - Introductory training or expanded training package available

Condition: used, Year of construction: 2024, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine Isdpfxoif Ek Rj Affotr • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 35 h, functionality: fully functional, machine/vehicle number: 2002-045, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Itedjfnlkwjpfx Affer Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head The machine is sold with one driven circular knife and one punching tool. • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.