Chip extraction fan 15 kW

Reitz MXE 020-018030-00

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Ffjdjh A Sfdspfx Adpjw Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Year of construction: 2012, condition: used, fuel type: electric, weight max. in kg 2500 kg stroke 3700 mm fork length 900 mm Super elastic battery Baujahr 2013 construction height 2630 mm weight of the machine ca. t Fodpefibh Rsfx Adpofw Duplex / Free lift

Condition: ready for operation (used), Hsm HL 4809 LI baler Ffedjra Dddopfx Adpjw - Large filling opening, ideal for big boxes - Container tipper for convenient filling Pressing force in kN: 480 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 400 kg - Bale dimensions (length x width x height in mm): 1200 x 1100 x 750 - Machine dimensions (length x width x height in mm): 5648 x 1849 x 2515 Idle cycle time in seconds: 53 - Manual tying: 4 times with wire

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Ffsdpfx Adovvkd Topsw

Condition: used, Year of construction: 2003, operating hours: 200 h, functionality: fully functional, fuel type: diesel, color: blue, power: 80 kW (108.77 HP), output voltage: 400 V, output frequency: 50 Hz, nominal power: 80 kW (108.77 HP), nominal power (apparent): 100 kVA, continuous power (apparent): 100 kVA, Used Diesel Generator – Volvo Penta TAD 520 GE | 100 kVA / 80 kW | Enclosed Technical Specifications: Brand: SES (Scandinavian Engineering Systems A/S) Engine Model: Volvo Penta TAD 520 GE Fodpowzimcofx Adpefw Power Output: 100 kVA / 80 kW Voltage: 400/231 V Frequency: 50 Hz RPM:1500 Year of Manufacture: 2003 Enclosure: Yes (Soundproof cabinet included – see photos) Cooling: Water-cooled Control Panel: Integrated Condition: Used, in good working order Additional Information: Engine rated at 102 kW PRP (Prime Rated Power): 94.0 kW Alternator type: UC 274 D Fully enclosed cabinet – suitable for outdoor installation Regularly maintained Ready for inspection and immediate dispatch Photos available upon request.

Condition: used, Year of construction: 2000, machine/vehicle number: 0-260-06-0228, Foot control 1200 x 800 mm suction nozzle 80 mm pneumatic connection cable + plug 16 A Fodpfx Adjigadlopofw 1 set of operating tools 1 set of sensing rollers

Year of construction: 2013, operating hours: 1,300 h, condition: reconditioned (used), Skid similar but not Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Falch xs31.1-30-500 30l/min. at 500bar (year 01/08) - Engine: electric 30kW - 1250l water tank - pressure gauge - pressure regulator - safety valve - Steel frame powder coated - Aluminum covers - Forklift lugs and crane eyes - Dimensions with 1250l water tank: approx. 1.100 x 1.760 x 1.770 - Empty weight: 1.085 kg Ffodjg Tm N Aspfx Adpjw - Year of construction: 2013 - Operating hours: approx. 1500 h Condition: high pressure pump 06/2022 overhauled. In very good used condition.

Condition: used, machine/vehicle number: 006849, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Fjdewd Itmepfx Adpjfw Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 006042, Type of edging: Thin edge, Thick edge Fodpjwacqlofx Adpsfw Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 40 mm Operating Units: 9 nr

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, Paint/spray wall dimensions without fan and control Panel! Fodpfsia Ta Uox Adpefw Extraction surface - dimensions (mm): 4430(w)x1900(h) Overall dimension(mm): 4530(w)x2350(h)x810(d) Technical data: - Fan power 4.4kW (ATEX) - Fan suction capacity: 24000 m³/h (max 1200Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us