Used Top Bearing for sale (10,855)

Condition: used, Year of construction: 2011, functionality: fully functional, power: 3.73 kW (5.07 HP), cutting height (max.): 440 mm, cutting width (max.): 600 mm, pivoting range: 60 °, total height: 1,700 mm, total length: 2,900 mm, total width: 1,300 mm, overall weight: 1,320 kg, Equipment: CE marking, We offer this used semi-automatic band saw TOP-PORĘBA BMT460DSA, year of manufacture 2011. Motor power: 5 HP Cutting diameter at 90° (round cross-section): 460 mm Cutting dimensions at 90° (square): 460 x 460 mm Cutting dimensions at 90° (rectangle): 440 x 600 mm Cutting diameter at 45° (round cross-section): 445 mm Cutting dimensions at 45° (square): 445 x 445 mm Cutting diameter at 60° (round cross-section): 295 mm Cutting dimensions at 60° (square): 295 x 295 mm Ncedpfx Asyv Ai Hohvsp Blade dimensions: 41 x 1.3 x 5330 mm Machine weight: 1320 kg If you have any questions or require additional information, please send us a message or contact us by email.

Condition: good (used), Year of construction: 2003, functionality: fully functional, VIET CHALLENGE 333 TM + VALERIA 3CCC Inf Minimum thickness: 3.0 mm Maximum thickness: 160 mm Maximum width: 1350 mm Minimum length: 250 mm Abrasive belt size: 1400x2620 mm Rollers: 3 + 3 (rubber) Surface cleaning system with brush and air on both sides Maximum feed speed: 20.5 m/min Can operate in 4 different modes: 1. Both machines – all 3 rollers driven on each machine 2. Both machines – only the last 2 rollers driven on each machine 4. Machine with top contact – all 3 rollers driven or only the last 2 rollers Tolerance: 0.2–0.3 mm for a panel with 1250 mm width Roller configuration: Machine 1 – Bottom sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 Machine 2 – Top sanding: Ncodpfsw A Ng Ejx Ahvsp First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 The machine is assembled and can be tested.

Year of construction: 2021, operating hours: 100 h, condition: like new (used), functionality: fully functional, ZT-JGQG6S/E Fiber Laser Cutting Machine, 3000W – Excellent Condition Reduced to sell, from €43.500. For sale: ZT-JGQG6S/E fiber laser cutting machine, Chinese manufactured, purchased new in December 2021. The machine has seen extremely low usage (no more than approx. 100 operating hours) and is in excellent, near-new condition. Designed for fine detail work and high-precision industrial cutting, including PCD/ PCBN/ CVD/ Sapphire/ PDC/ Cemented Carbide/ Ceramics and other precious and ultra-hard materials. This fiber laser machine offers stable performance, clean cuts, and low operating costs. The machine has been well maintained and stored in a controlled environment in our workshop in Albania. The machine it is priced to sell and its price reflects upon condition and usage. For all inquiries feel free to contact through Whats App with provided numbers or though e-mail Machine Details: • Manufacturer / Model: ZT-JGQG6S/E • Machine Type: Fiber Laser Cutting Machine • Maximum power output: 3000W • Application: Industrial laser cutting / precision cutting • Year of manufacture: Q4/ 2021 (Approx. 4 years old) • Operating hours: Approx. 100 hours • Condition: Excellent • Origin: China • Current location: Albania • Availability: Immediate Ncsdpfx Ahjya I Ihsvep Highlights: • Very low usage since new • No import lead time or customs delay • Suitable for production or R&D environments • Cost-effective alternative to purchasing new The machine is ready for inspection by serious buyers. Additional technical specifications, photos, and documentation can be provided upon request.

Condition: repair required (used), Year of construction: 2019, functionality: not functional, machine/vehicle number: BB19076267, Technical characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Maximum Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually exchangeable, made from Vulkollan-type plastic to support high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar stabilization. - Remnant Handling: Provides rear extraction using a self-centering extractor or front ejection option. Ncedpfxsxx Shuo Ahvep - Repositioning System: Optional rail system allows for up to 600 mm of axial or radial displacement for lathe maintenance. - Automation: Fully controlled by a PLC with brushless motor and digital pneumatic valves to manage speed and thrust. - Bar Storage: Single-level magazine with 235 mm bar capacity. Machine status: NOT WORKING # Set of guides and accessories for bar clamping included # Bearing set for the pusher head "Pusher head bar" included

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034613, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm Nedsxx Sclopfx Ahvjcp - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max. Feed Speed: 30 m/min - Max. Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Rear extraction with self-centering extractor or front ejection. - Repositioning System: Optional rail allows axial or radial displacement up to 600 mm for lathe access. - Automation: Fully PLC controlled, with brushless motor and digital pneumatic valves for speed and thrust control. - Bar Storage: Single-level magazine, 235 mm capacity. Bar feeder details: TOP Automazione model: FU 352 Semi-automatic Bar Feeder for Horizontal Loading to Lathe (Autonomy depends on bar diameter) Dimensions: Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: - Digital HMI controller for manual operations Machine status: - In working condition

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034612, Technical characteristics: Core Specifications Bar Diameter (Round): 6 mm – 50 mm Bar Diameter (Hexagonal): 6 mm – 45 mm Bar Diameter (Square): 6 mm – 37 mm Bar Length Options: 1200 mm – 3200 mm Maximum Feed Speed: 30 m/min Maximum Remnant Length: 300 mm Required Air Pressure: 6.5 – 7.5 bar Operating Voltage: 230V / 50 Hz Weight: 1200 kg Design & Features Guide Channel: Manually interchangeable, made of Vulkollan-type plastic, suitable for high-speed bar rotation. Front Steady Block: Interchangeable every 5 mm for optimal bar support. Remnant Management: Rear extraction via self-centering extractor or front ejection available. Repositioning System: An optional rail system enables axial or radial displacement up to 600 mm for lathe servicing. Nsdpexx Sfajfx Ahvscp Automation: Fully PLC-controlled, equipped with a brushless motor and digital pneumatic valves for speed and thrust control. Bar Storage: Single-level magazine with a 235 mm loading capacity. Bar Feeder: TOP Automazione Model FU 352 SX SEMI-AUTOMATIC BAR FEEDER FOR HORIZONTAL LOADING TO LATHE (AUTONOMY DEPENDS ON BAR DIAMETER) Dimensions Bar Feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: DIGITAL HMI CONTROLLER FOR MANUAL OPERATIONS Machine Status: OPERATING

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063530, Technical Characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features Njdpfexx R Nqsx Ahvecp - Guide Channel: Manually interchangeable, made of Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Offers rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system allows axial or radial displacement up to 600 mm for lathe servicing. - Automation: Fully PLC controlled with brushless motor and digital pneumatic valves for speed and thrust regulation. - Bar Storage: Single-level magazine with a 235 mm load capacity. Bar Feeder: TOP Automazione Model: FU 352 - Dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: - HMI digital controller for manual operations. Machine Status: WORKING - Set of guide channels and accessories for bar clamping worn - Set of bearings for pusher head worn

Condition: new, Catalog number: H0561 – new machine, in stock – CE certificate – Austrian production – professional – trolley on steel bars TECHNICAL DATA engine power S1 5500W (/750) voltage 400V / 50Hz table height 890mm extraction connector 100mm sliding table 3200x435mm extension table 1200x550mm max. cutting width with gauge 1300mm disc diameter 250-400mm (30) scoring blade diameter 120 x 20 x 3.2-4.2/2.2 mm rotational speed I: 3000; II: 4000; III: 5000 rpm Rotation speed of the scoring saw 8000 rpm Motor power of the scoring saw 750 W Blade tilt 0-45 ° Acoustic power level 90 dB (A) Acoustic pressure level 88.2 dB (A) Overall dimensions of the machine when unfolded L / W / H 3350 x 3600 x 900 mm Shipping dimensions 1350 x 2200 x 1170 mm Net/gross weight 930 / 1110 kg Features: - solid construction - with a large aluminum sliding table and boom, ideal for machining large elements and cutting large, heavy boards to size - cast iron work table (1100 x 700 mm) with table extension (900 x 830 mm) and table extension (610 x 600 mm) with solid steel construction – extension table (1200 x 550 mm) + cutting fence (1950 – 3300 mm) – scoring saw with separate motor – manually adjustable main saw blade angle 0°-45° (using angle indicator) – electric height adjustment of main saw blade and scoring saw Ncjdeyg Iu Ijpfx Ahvep Scope of delivery: LEUCO TCT main blade (Ø300 x 30 x 3.2 mm T72) LEUCO scoring saw blade (Ø120 x 20 x 3-3.8 T=2*12ES) Pressure beam – option Net price: PLN 24,300 Net price: EUR 5,750 depending on price EUR 4.20 (Prices may vary with higher fluctuations)

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00041790, The full description can be found in the two attached documents. The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. The system offers numerous functions and statistics, including: - Production progress - Production times - Weighing statuses Nodpfx Ajykq T Uehvjcp - Preparation times - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00040812, The full description can be found in the two attached documents. The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. Ncedpfxoykq D Hs Ahvep The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. The system offers numerous functions and statistics, including: - Production progress - Production times - Weighing statuses - Preparation times - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Year of construction: 2019, condition: like new (used), 2 Quantity Antares Vision Matrix Stations - Top View Standalone module for off-line semi-automatic carton/bottle-to-case or bundle-to-case aggregation The Matrix Station Top View is a standalone aggregation module for off-line manual packaging operations. It is designed to allow Pharma Industries to establish a reliable and consistent hierarchical relationship “parent-child” throughout the composition of packaging from lower level to higher one, such as folding box/bottle to case or bundle to case. The operator inserts the individual packaging into the shipping carton layer by layer. Each completed level is photographed from above by a high resolution auto-focus camera through an automatic trigger. Dedicated software monitors the progress and when the number of units and layers is reached, a label is generated. The Matrix Top View is also able to handle higher aggregation levels, boxes on pallets. Aggregation station designed to maximize productivity in the manual packaging operations. Performs multiple reading from the top of the Datamatrix codes on cartons or bottles when fit into a case, managed as units or as aggregated bundles. Ncsdpfx Aoyb Tw Rohvop The vision head is equipped with camera system and integrated LED lighting to read each layer of cartons during case composition. AUTOMATIC FOCUS ADJUSTMENT FOR EACH CASE LAYER READING MULTIPLE READING WINDOW (mm): 600×420 ERGONOMIC DESIGN OPTION: TRANSPORTABLE ON WHEELS

Condition: used, Labeling machine for top and bottom, with a ZODIAC printer for the top labels. Ncsdpfx Ajyaqttshvsp

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Nsdpfxopdqzxo Ahvocp Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Condition: good (used), functionality: fully functional, mileage: 17,300 km, power: 88.26 kW (120.00 HP), fuel type: diesel, empty load weight: 5,430 kg, overall weight: 10,500 kg, axle configuration: 4x4, fuel: diesel, Year of construction: 1986, Equipment: all wheel drive, TOP CONDITION Nsdpfxjxm S Abj Ahvocp

Condition: used, Year of construction: 2004, The used TOP AUTOMAZIONI X-FILES automatic bar feeder is a valid alternative to the more traditional bar pusher for performing unattended bar machining on production CNC lathes. Multilayer, year of manufacture 2004, CE compliant; maximum bar diameter: 75mm maximum bar length: 3300mm Ncedpfxox Nqi Io Ahvep

Condition: good (used), Loos 8000kg/h. Bj.2001. top condition. incl. Weishaupt burner G70 Njdpfom Rhd Dex Ahvocp

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: BM17115077, 🔧 Automatic Bar Feeder – Top Automazioni MA315SX For sale is a fully functional automatic bar feeder from Top Automazioni (Italy), designed for use with CNC lathes. 🏭 Manufacturer: Top Automazioni 📌 Model: MA315SX 📅 Year of manufacture: 2018 🔢 Serial number: BM17115077 ⚖️ Weight: approx. 500 kg ✅ CE compliant ⚙️ Technical Specifications • Suited for bar material up to 3 meters in length • For bar diameters up to Ø 12 mm • Automatic and stable material feeding for serial production • Robust and proven construction by Top Automazioni 🔌 Machine Integration • The bar feeder was previously connected to a Tsugami CNC sliding headstock lathe • Machine interface and operation were fully functional up to removal ⚡ Electrical Data • Supply voltage: AC 230 V • Frequency: 50 / 60 Hz • Rated current: 7.8 A 🛠️ Condition • Used • Technically flawless / fully functional • Normal wear according to age and prior use 📍 Location • Stuttgart area, Germany 📦 Scope of Delivery Nsdjx Hgpfepfx Ahvjcp • Bar feeder as illustrated • Sold as-is Inspection is possible by arrangement. Further technical information or customized options can be discussed upon serious inquiry.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, total width: 1,350 mm, total length: 7,210 mm, overall weight: 4,000 kg, Round bars diam. Min. 15 mm Round bars diam. Max. 80 mm Hexagonal bars key min. 15 mm Hexagonal bars key max. 65 mm Nodpfxevi Eyps Ahvocp Min. bar length 1200 mm Max. bar length 6,100 mm Max. feed speed 30 m/min – 500 mm/ sec Max. cut length 300 mm

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER €3,290 net including BINZEL UP DOWN HOSE PACK or Fronius AW hose package with display on the torch including connection conversion (+€500) ✅ Scope of delivery: ➤Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose package. These features cost approximately €400 more from Fronius. ➤Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most useful wire feed case – the wire is safely stored in the enclosed case. ➤Fronius Intermediate Hose Package (Long) – Each device comes with a 5-meter-long connecting hose package between the power source and the wire feeder case for greater flexibility and better handling. Take the wire feeder case with you to places that are difficult to reach! The connecting hose package is neatly attached to a hook on the side of the device. (Hooks are manufactured by us.) ➤Fronius Large Trolley – Arguably the best trolley with gas cylinder holder on the market. ➤Binzel Hose Package – With up/down amperage adjustment on the torch. ➤3-4m Earth Cable ➤New Messer Pressure Regulator ➤New Basket Spool Adapter for Large Wire Spools This device can weld almost all materials, including aluminum, steel, and stainless steel (V2A). It features tracer wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options are available for an additional charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 450.00 The first 10 buyers of a device will receive an additional --> 2nd hose package free Currently 30+ ⭐TPS 3200 SET⭐ in stock ----- Debsum Rw Dokh Hufpokk AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We can also be reached via WhatsApp and Viber. ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ ►►►What is the condition of the devices? To explain, we buy like-new used devices, disassemble them, check everything, replace any worn parts if necessary, and only then, after a successful test weld, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. Njdswbillopfx Ahvjcp ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Why buy from us? We are experts in this Fronius welding series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We know about these devices and don't sell anything we don't know about.

Year of construction: 2004, condition: used, Automatic bar feeder for diameters from 6 to 45 mm and a maximum bar length of 3,300 mm. CE compliant, complete with manuals and certification. Ncodpfoww Hx Ijx Ahvep

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF14123258, bar length: 3,200 mm, bar passage: 50 mm, No reserve price – guaranteed sale to the highest bidder! Ncjdpfsxf Hy Eex Ahvop TECHNICAL DETAILS Bar length: 1,200 – 3,200 mm Passage: 8 – 50 mm

Condition: used, mileage: 64,666 km, power: 140 kW (190.35 HP), first registration: 05/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,620 mm, loading space length: 3,300 mm, loading space width: 1,880 mm, loading space height: 1,970 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Subject to errors and prior sale! Internal number: 0430. P358048 ----EQUIPMENT * Passenger side airbag * Seats: Two-seater passenger seat * Anti-theft alarm system and burglar alarm system * Electrics for trailer socket * Seat belt warning device for passenger seat * Tempmatic air conditioning * Instrument cluster with color display * Seats: Comfort driver's seat * Radiator grille frame in vehicle color * MBUX multimedia system with 7-inch touchscreen High-resolution 7-inch touchscreen (960 x 540 pixels) AM/FM radio with double tuner Bluetooth connectivity with audio streaming and hands-free function Smartphone integration via Android Auto or Apple CarPlay Multimedia connection unit for connecting portable devices via a USB-C interface 4 x 25 W output power, sound adjustment, separate volume adjustment for audio and telephone 2-way speakers at the front * Marker lights, side * Steering wheel: Multifunction steering wheel * Package: Charging package - The charging package expands the charging options in the cockpit by two 5V USB-C ports and a 12V socket. A USB port and the 12V socket are installed in the middle storage compartment of the instrument panel and another USB port in the lower area of the center console. This allows electrical devices such as mobile phones to be charged within reach of the driver and front passenger. * Radio: Digital radio DAB * Rain sensor * Spare wheel holder with jack - under frame end * Seat heating on driver's side * Cruise control Njdpjk Dhcmjfx Ahvecp * Front axle with increased load capacity * Electrics preparation, parameterizable special module * ADAPTIVE ESP * Storage above windshield * Storage compartment under cockpit * Towing eye at rear * Axle ratio i = 3.692 * Airbag on driver's side * Outside mirrors electrically adjustable and heated * Outside temperature display * Battery: Fleece battery 12 V / 92 Ah * Hill start assist * Third brake light * Adaptive brake lights * DPF, SCR * Tachometer * Entry handle on corner pillar at rear right * Driving light assistant * Electric window lifter. front * Generator 14 V/200 A * Noise reduction measures * Gearbox: 9G-TRONIC * Seat belt warning device * HOLD function * Grab handle for loading area sliding door * Main tank 71 liters * Instrument panel and instrument cluster * KEYLESS start * Child safety locks on the rear doors * Headrests (2) * Paintwork: plain paint * Steering wheel vertical and axial * Headlight range adjustment * Mercedes-Benz emergency call system * OBD (On Board Diagnosis) Level D * Breakdown management * Upholstery: fabric * Radio accessories: Communication module (LTE) * Sliding door right * Crosswind assist * Power steering * Seats: Armrest on passenger seat * Seats: Armrest on driver's seat * Seats: Adjustable passenger seat * Start-stop function * Partition wall throughout * Lashing eyes * Remote Services Plus preparation * Immobilizer * Heat-insulating Glass * Central locking with radio remote control * Registration N1 ... and much more ----The vehicle is unprocessed! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing / leasing also possible without a down payment! Do you have any questions? We are happy to advise you!

Condition: new, functionality: fully functional, The Table Top Print bagging machine enables efficient packaging and sealing of products in pre-made bags and is suitable for various formats. The machine is easy to operate and features a user-friendly display for setting up, saving jobs, and controlling operating parameters. For maximum flexibility, it offers automatic and manual operating modes with a secure sealing bar. Training a packaging operator takes less than five minutes. With integrated thermal transfer printing technology, bags can be directly printed with high-resolution graphics, text, and barcodes—eliminating the need for separate labeling. Features: - Multi-color display for straightforward settings - Pre-selection of desired product quantity for packaging - Integrated total product counter (with reset function) - Roll change in under one minute - Sealing via foot pedal, automatically, or manual push-button - Feed systems for automatic bag filling available on request Technical Parameters: 1. Maximum bag length: 450 mm 2. Maximum bag width: 250 mm 3. Maximum bag thickness: 0.04–0.1 mm per layer 4. Packaging speed: up to 25 units/minute 5. Supply voltage: 1Ph. 220V 50Hz 6. Power consumption: approx. 1 kW 7. Machine weight: approx. 70 kg (including printer) 8. Machine dimensions: approx. 670 x 665 x 860 mm 9. Print area: 53 x 75 mm 10. Bag type: wicketed bags on rolls Ncjdpfx Ajxlzr Ashvjp Base machine: €12,500 + Thermal transfer printer: €5,500 + Label dispenser: €2,900 + SATO label printer incl. dispenser: €6,500 to €9,000

Condition: used, machine/vehicle number: 008349, Max. machining width: 1300 mm Min. machining thickness: 100 mm Working Table: adjustable Vacuum feed belt: yes Nodpsx A Tfijfx Ahvscp No. Operating units: 3 Nr

Condition: used, mileage: 220,000 km, power: 100 kW (135.96 HP), first registration: 08/2014, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 7,000 mm, loading space length: 4,300 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Get in touch quickly and easily with our sales consultant. Attention! Sale preferably to business customers only. Internal ID Number: [3219] ----Optional extras available: * 12 to 64 months warranty (valid throughout the EU) * New service inspection * New MOT & emissions test * Nationwide delivery * Financing available, also with no down payment * Tow bar retrofitting available upon request * Spring offer: On request and for a surcharge of only €999, the towing capacity can be increased to up to 3,500 kg (depending on vehicle and manufacturer). ----Vehicle highlights: * 19% VAT deductible * Regularly serviced * German specification vehicle * Second owner * Ready for immediate use * Meets Euro 5 emissions standard * Maxi version, high roof & long wheelbase * Automatic climate control * Cruise control * Reversing camera * Load compartment lined with wood * Towing capacity = 3,000 kg Special equipment: Storage: shelf/compartment under front headliner, audio system RSD 2000 (front speakers), BlueMotion Technology version, electrically adjustable & heated exterior mirrors, EcoProfi Eco Package, EcoProfi driver’s cab package, driver assistance system: front & rear parking sensors, chassis: reinforced rear shock absorbers, adjustable steering column, spare wheel with road tires, hinges for rear doors with wider opening angle, reinforced rear stabilizer, rear entry step integrated into the bumper, high wood panelling in loading/passenger compartment, pre-wiring for tow bar (socket & wiring) Further features: Driver’s airbag, traction control (ASR), EcoProfi, driver assistance: brake assist (HBA), rear wing doors without windows, bodywork: high roof panel van, body variant: high roof, 75-litre fuel tank, high solid partition wall without window, side marker lights, model upgrade, engine 2.0 litre – 100 kW TDI, parking light control, wheelbase 4,325 mm, low-emission Euro 5 compliant, right-side sliding loading/passenger door, seat upholstery: fabric, cab seats: driver’s seat height adjustable, reinforced front stabilizer, steel wheels 6.5x16, permissible gross weight 3.5 t, additional brake light ----Interested in leasing or financing? We offer attractive options – also with no down payment possible! Feel free to contact us. Contact: Phone: E-mail: Ncsdpfxsyw Er Hj Ahvjp Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All information provided online is non-binding and serves only as a general description of the vehicle. Errors, typos, and prior sale reserved. The binding condition of the vehicle is determined solely by the purchase contract on site or by written confirmation. We prefer to sell vehicles with mileage over 50,000 km or older than 3 years to business customers.