Used Oil Cabinet for sale (10,247)

Condition: good (used), Year of construction: 1996, Fuel gauge, oil pump, oil dispenser, oil station, fuel pump, tank data acquisition, tank system display, oil cabinet, fresh oil pump -Manufacturer: Tecalemit, electric pump for fresh oil -Type: 1.54 80 01.4 Cedpfxew A Nddj Aiijri -Flow rate: 1 to 10 l/min -Motor: Hanning 0.55 kW -Pressure vessel: Volume 2.8 liters -Individual components: see photos -Quantity: 1x oil cabinet available -Price: per piece -Dimensions: 500/480/H250 mm -Weight: 19 kg/pc.

Condition: used, Garant Oil Cabinet, 145x72x75cm Design: Sturdy steel sheet construction with reinforced hinged doors, lockable by means of a sliding handle with a pin cylinder lock. The cabinet body is equipped with a single-drawer locking mechanism. This ensures that only one drawer can be opened at a time, thus largely preventing the cabinet from tipping over. Drawers and shelves can be positioned in a 25 mm grid. Oil cabinet, equipped with plastic oil canisters. Drawers/shelves load capacity: 200 kg Drawer extension (partial/full extension): 100% Drawer extension: Extension lock Height adjustment in grid: 25 mm Pin cylinder lock: modular plug-in insert HxWxD = 145x72x75cm Without key Crsdpfjk Shv Hsx Aiiei Item condition: used RRP €3240 You can find more control cabinets – new and used – in our shop! International shipping costs on request!

Condition: used, Oil hand pump, oil cabinet, oil dispenser, oil pump, oil dispensing system, oil delivery device, oil station, oil centrifuge -Handover: in its current condition as inspected -Level indicator: missing, condition as shown in photos -Manufacturer: Tecalemit, mobile oil dispensing device with hand pump Crjdpokahi Ajfx Aiiji -Item No.: 1.520201.1 -Tank capacity: approx. 30 liters -Pump: hand-operated -Hose: can be shut off with tap -Dimensions: 500/440/H820 mm -Weight: 17 kg

Condition: good (used), Oil hand pump, oil cabinet, oil cabinet, oil conveyor, oil dispensing system -Contents: approx. 60 l -Air pump Csdpfx Asb A Hf Usiiori -Hose with tap -Transport dimensions: 500/500/H950 mm -Weight: 35 kg

Condition: good (used), Oil cabinet, oil cabinet, oil pump, oil dispensing station -with counter -Extendable hose with dispensing nozzle -Compressed air connection Csdsb A Igvepfx Aiijri

Condition: used, Year of construction: 2003, - Brand: Oil & Steel - Type: Octopussy 14.65 - Year of construction: 2003 - Weight: 1600 kg. - Hours: 1450 hours - Working height: 14 meters - Lateral reach: 6.8 meters - Lifting capacity: 120 kg. - Drive: Petrol + 220 volts - Safety inspection possible - Aerial work platform book available - CE document available - Machine is in very neat condition !! - Originating from first owner (Museum in the Netherlands) - Possibly with machine transporter (EUR 2950,-) - Video on our website - Trade-in and transport possible * Working height: 14 meters * Lateral reach: 6.8 meters * Lifting capacity: 120 kg. * Drive: Petrol + 220 volts * Brand: Oil & Steel *Type: Octopussy 14.65 * Construction year: 2003 Cedpjz Tc H Njfx Aiieri Aerial work platform book: Yes * Weight: 1600 kg. CE document: Yes * Hours: 1450 uur Video on website: Yes Safety inspection: Yes

Condition: used, Year of construction: 2002, - Brand : Oil & Steel / Nissan - Type : Scorpion 130 - Year of manufacture: 2002 - Hours: 4294 hours - Odometer: 61,205 km. - Weight: 3340 kg. - Drive: Diesel - APK: Working height: 13 meters - Lateral reach: 8 meters - Lifting capacity: 220 kg. - Aerial work platform book available - CE document available Crsdpjz Hw Nksfx Aiiji - Safety inspection possible - Dutch license plate - Export license plate possible - Video on our website - Trade-in and transport possible *Type: Scorpion 130 * Brand: Socage / Iveco * Construction year: 2002 * Hours: 4294 uur * Km. position: 61205 km. * Weight: 3340 kg. * Working height: 13 meters * Lateral reach: 8 meters * Lifting capacity: 220 kg. * APK: * Drive: Diesel

Condition: used, 3D MICROMAC Type: microCUT laser marking system microCUT Enclosure IPG laser source Raylase 3-axis scanning system Power measurement head 1 Power measurement head 2 Camera system for positioning Camera system for quality inspection Cooler Extraction system Control cabinet with IPCs Coolant distributor Machine dimensions: Machine weight: 2 tons Width 922 mm, Depth 4653 mm, Height 2925 mm Components: Extraction system: Height 2869 mm, Width 760 mm, Depth 1577 mm Cooler: Height 1697 mm, Width 1440 mm, Depth 860 mm Weight (without filling) 500 kg Laser rack: Height 1786 mm, Width 856 mm, Depth 806 mm Weight 500 kg Control cabinet: Height 2001 mm, Width 1616.05 mm, Depth 605 mm Machine connections: Electrical: Mains voltage 3*400 VAC/N/PE Mains current consumption 74A Frequency 50/60Hz Power consumption 51.3kW Control voltage 24/5VDC Main fuse NH 100A gG Modules: Laser source: Mains voltage 400 VAC Frequency 50/60Hz, Power 16.7 kW, Current consumption 59A Cooler: Mains voltage 400V, Frequency 50/60Hz, Current consumption 40A Machine: Consumable media Working pressure 6-10 bar Temperature 10-50°C Quality ISO 8573-1 Solid particles: Class 1 Oil: Class 1 Water: Class 4 Residual oil content < 10µg/m³ Water content < 6 g/m³ Pressure dew point 3 °C Consumption < 120 l/min Cooling water cooling unit module: Cooling water outlet temperature 21°C Cooling water return temperature 26°C Setpoint tolerance 1K Cooling water flow rate 69 l/min Free pump pressure 1.5 bar DI water cooling unit Cooling water outlet temperature 26°C Cooling water return temperature 31°C Setpoint tolerance 1K Cooling water flow rate 10 l/min Free pump pressure 1.5 bar Laser source manufacturer IPG Type: YLS-5000 Mode Continuous, Quasi-continuous Wavelength 1070nm Power 5kW Frequency 5 kHZ Scanner manufacturer Raylase AG Type: Axialscan-30-Y Field size 1000x1000 mm Spot diameter 87 1/e²(µm) Resolution < 31 µm Working distance 1198 mm Cooling unit: Manufacturer Riedel Type: PC 250.01-NZ-DI-S Refrigerant R407C 50 Hz Net cooling capacity 38 kW 60Hz Net cooling capacity 40.3 kW Camera system: Manufacturer e2V Type: AVIIVA TM UM2 GE Quality cameras: Manufacturer e2v type: DiViiNA LM1 CL Extraction system: Manufacturer Donaldson Filtration Type: DOWNFLO Oval 3-3 Cedpfxezdqp Io Aiisri Max. Fan speed 3000 rpm Working pressure: 4.2 bar Pulse duration 100ms Volume of the pressure vessel 92 l Type: microCUT laser marking system Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 1998, functionality: fully functional, cooling capacity: 3.3 kW (4.49 HP), input voltage: 400 V, input frequency: 50 Hz, Oil cooler – Flow-through oil cooler D20V D30V 2 flow-through oil coolers – cooling unit for machine cooling – individual sale possible. Two stand-alone flow-through oil coolers from Wöhr Kältetechnik for cooling/temperature control of the coolant circuit or hydraulic system on machine tools, with integrated circulation pump and flow monitor. Control cabinet integrated in the housing with connection cable, LAE temperature controller MTR11, and potential-free alarm contact in case of a malfunction. The integrated circulation pump is a gear pump. The cooling units are suitable for clean oil. Instructions for programming the temperature controller are available. Both coolers are in used condition. Cooling unit. Wöhr flow-through oil cooler, type D 20 V Year of manufacture 1998, serial no. 98101582, cooling capacity 2 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with Walter Procon connection plug (cooler was installed on the hydraulics of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 1.7 kW. Flow-through oil cooler D 30 V Crodpjg U H E Sefx Aiiji Wöhr flow-through oil cooler, type D 30 V, year of manufacture 1998, serial no. 98101583, cooling capacity 3.3 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with CEE connection plug (cooler was installed on the grinding oil supply of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 2 kW. The oil coolers and oil cooling system are in used condition and well maintained. Price negotiable. All technical specifications are subject to typing errors/changes. We only sell to countries within the European Community.

Condition: used, Year of construction: 2000, machine/vehicle number: LC348, Used Filling Line For Edible Oil In PET 1L Bottles Csdjyhbzdopfx Aiisri Capacity: 6.000 bph x 1,0 L Blow Molding Machine KOSME KSB 3000 – 2001. – 2 pcs x 3.900 bph Box for preforms with transport to the blower Compressor for cooling moulds MTA S.R.L. – 2000 KOSME bottle air conveyor – 1999 AISI 304 stainless steel Electrical control cabinet with PLC Built-in air filters It transports bottles from blower to filler Filling Monoblock Filler and capper – ICS-Slovenia – 1995 – 6.000 L/h Labelling Machine Labeller ICS – 1995 – paper labels, cold glue Conveyor belts ICS – 1995 Packer in transport boxes 3×5 bottles – ICS – 1995 Shrink Wrapper Shrink wrapper SMIPACK-packer in foil 2×5 bottles – 2013 Pallet Wrapper Pallet wrapper ZLATOROG-Slovenia – 1999 Compressor KAESER low and high pressure compressors – 2000 Refrigeration dryer There are spare parts worth It has complete technical documentation Required space for equipment: 600 m2 Required installed power (equipment, compressors, refrigerators): 495 kW The Used Filling Line For Edible Oil In PET can be seen in full production function until December 15, 2022

Condition: excellent (used), Year of construction: 2005, For sale are functional and very well-maintained dual-fuel burners (oil/gas) from the Weishaupt brand, (1875 kW) complete with control cabinet and gas line (Dungs DN 65). 1. Weishaupt GL 30/2-A Model: TM-1LN Year of manufacture: 2005 Output: 300-1875 kW 31-157 kg/h Csdpfx Aiswgk A Ajisri 2. For sale are functional and very well-maintained dual-fuel burners (oil/gas) from the Weishaupt brand, model RGL40/1-B (2550 kW), including gas valve, Dungs DN 65. Year of manufacture: 2001. Weishaupt RGL40/1-B (2550 kW) - Output: 450-2550 kW - 45-215 kg/h - Model: ZM - Connection pressure: 15-500 mbar

Condition: used, machine/vehicle number: LC557, Used Bottling Lines for edible oil 6000 bph General Configuration of the Bottling Line The Used Bottling Lines for edible oil 6000 bph line processes edible oil in 1-liter PET bottles, operating at a nominal speed of 6000 bottles per hour. The configuration includes equipment from multiple manufacturers, integrated to ensure continuous operation and reliability in filling, labeling, packaging, and palletizing. Operators correctly shut down the entire system in December 2022. At present, the machines are dismantled and stored in suitable conditions. Consequently, this line is immediately available for relocation and reuse. Overall, the structure represents a compact yet complete solution for medium-scale production. Container Formation: KOSME Blow Molding Machines The Used Bottling Lines for edible oil 6000 bph line includes two blow molding machines from KOSME, model KSB3000, year 2001. Each unit works with a preform box and an automatic transport system that feeds the blower. As a result, the system supports on-site bottle production. Therefore, it reduces logistics costs and improves plastic material handling. In addition, the dual-machine setup enhances production continuity and minimizes downtime. Cooling System: MTA Chiller and Air Conveyors An MTA chiller, model TAE 051, year 2000, cools the molds in the blow molding machines. Moreover, KOSME air conveyors, model L2000, year 1999, made of AISI 304 stainless steel, transfer the blown bottles to the filling monoblock. Notably, the system includes electrical cabinets with integrated PLCs and built-in air filters. Thus, it ensures effective airflow control and maintains consistent air quality. From a technical standpoint, this contributes to long-term reliability and hygienic conditions. Filling Monoblock: ICS RVP-12/ZS-3N The ICS filling monoblock, model RVP-12/ZS-3N, year 1995, serves as the core of the Used Bottling Lines for edible oil 6000 bph. This machine doses edible oil with precision, ensuring product integrity and consistent fill volumes. Furthermore, the system synchronizes with upstream and downstream units. Consequently, it enables stable operation even under variable load conditions. Likewise, its mechanical construction supports easy maintenance and spare part replacement. Labeling Machine: ICS with Cold Glue An ICS labeling machine, model ERG-6/2/2, year 1995, applies paper labels using cold glue. Specifically, the machine ensures proper adhesion on PET containers. Additionally, it supports the 1-liter format used throughout the line. In practice, this technology remains widely adopted for edible oil packaging. Therefore, the labeling unit integrates efficiently into the overall production layout. To sum up, it provides a cost-effective solution without compromising performance. Internal Handling and Packaging ICS conveyor belts, installed in 1995, connect all key stations. Subsequently, the line transitions to the packaging phase. It includes an ICS case packer, model Vlaga 2IC, which arranges bottles in transport boxes with a 3×5 layout. At the same time, a shrink wrapper from SMIPACK, model BP802ARV 280R-SP, year 2013, wraps bottles in film with a 2×5 configuration. Accordingly, the dual packaging options provide flexibility based on market or client needs. Overall, these systems enhance the final presentation and transport efficiency. Cedpfowlt Dgox Aiijri Palletizi...

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, operating hours: 990 h, machine/vehicle number: 198871007, mast type: telescopic, lifting height: 18,000 mm, overall weight: 2,700 kg, empty load weight: 2,700 kg, transport length: 5,200 mm, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 9 l, tire condition: 85 %, color: white, maximum load weight: 200 kg, Self-propelled crawler telescopic work platform with 18m working height and 8.5m lateral reach with 200kg basket load!!! Cjdpsvmbzwjfx Aiieri in very good condition, overhauled in workshop, white non-marking crawlers radio remote control, petrol and electric operation, hydraulic track widening and narrowing possible via remote control, clearance height is less than 2 meters despite 18m working height very simple design, therefore very easy to service, Honda petrol engine with speed control via remote control (quieter operation possible) All functions that are possible with the petrol engine work just as well as electrically Power and air in the basket Electronics/control units on the platform replaced, hydraulic hoses replaced, new ball bearings for electric motor, new rubber buffers, return filter, engine oil, fuel filter, air filter, paint on the platform is in good condition, no rust. the basket and the jib arm (the one in front of the basket) are rotatable (both functions are rotatable - special equipment!) the platform has a total of 3 rotation options (tower, jib arm and the basket) and each can be rotated separately! The crawler platform can be rented and purchased. new TÜV can be organized, TIMA transport trailer (with new inspection, new brakes) is also available to buy optionally for 8,000 net we can also organize transport of the platform worldwide!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 3,000 h, machine/vehicle number: 200011402, load capacity: 200 kg, lifting height: 14,000 mm, lifting power: 200 kg/m, overall weight: 1,650 kg, empty load weight: 1,650 kg, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 08/2026, fuel type: hybrid, fuel tank capacity: 5 l, tire condition: 50 %, color: white, maximum load weight: 200 kg, operation weight: 1,650 kg, Self-propelled, 14-meter tracked articulated boom lift for 200 kg and 120 kg loads, complete with electronic scale, available for sale! Year of manufacture 2012 for €21,800 net, year of manufacture 2014 with white tracks for €22,900 net. Only 78 cm passage width and 1.95 m passage height! Two-person platform with 1.4 m width, which can be detached from the boom with 2 bolts. Power and optical compressed air connection available in the platform and can be used. Operation is possible with gasoline or 230 V electricity (almost silent), allowing work to be carried out on weekends. Crodpfx Aozrf Saoiisi All functions (driving, outriggers, lifting, etc.) can be operated with electricity or gasoline. Good condition, white, non-marking tracks, all services performed, switching unit for 120/200 kg is new! Fully functional and ready for use! (Current TÜV inspection has expired). If desired, a current TÜV inspection can be arranged. For further questions, please call or send an email.

Year of construction: 2006, condition: used, Complete Automatic PET Edible Oil Bottling and Packaging Line – 8,000 Bottles/Hour Complete fully automatic production and packaging line for filling edible oil into 1.0 L PET bottles, with a production capacity of approximately 8,000 bottles per hour. Our asking price is EUR 520,000 net, ex works Shtip, North Macedonia. The price is negotiable, and we are open to considering reasonable offers. The line covers the complete production and packaging process, from PET preforms to finished automatically palletized products. The complete line includes: SIAPI EAS 50.100/8 – PET stretch blow moulding machine, 8 cavities Bottle air conveyor and conveying system AVE Industries RVM 30/8 – filling and capping monoblock, 30 filling stations and 8 capping stations Nitrogen injection system Bottle conveyor system AVE Industries 8T H/M E1 – automatic labelling machine AVE Industries CP3-20 – automatic shrink wrapping / packaging machine with heat tunnel Conveyor systems AVE Industries PABR-80 – automatic palletizing system Main specifications: Application: Edible oil Bottle material: PET Bottle size: 1.0 L Line production capacity: approx. 8,000 bottles/hour Cjdpfxozmd Uis Aiieri Main equipment year of manufacture: 2006 Fully automatic production and packaging line The equipment is offered as a complete integrated production line for PET bottle blowing, edible oil filling, capping, labelling, shrink wrapping and automatic palletizing. The complete line is currently installed, in operation and fully functional. Interested buyers can inspect the line and see it running under actual production conditions by prior arrangement. The line is located in Shtip, North Macedonia. Additional technical documentation, photographs and videos of the equipment are available upon request. The complete line is offered for sale as one unit.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, the laminar flow cabinet was located in a cleanroom. Model Parameters BBS-H1300 BBS-H1800 External dimensions (W*D*H) 1300*820*2040 mm 1800*820*2070 mm Power supply AC 220V±10% AC 110V±10% Frequency 50 Hz 60Hz Power consumption 400W 500 W Airflow velocity 0.3～0.5m/s UV lamp power consumption 30W*1 30W*1 Fluorescent lamp Crodpfx Aijzia Idjisi power consumption 12W (LED)*1 16W (LED)*2 HEPA filter 99.999% efficiency at 0.3 µm Noise ≤65dB

Condition: used, This listing is for the Walker Class 11 Biological Safety Cabinet The unit is in full working condition and is ready for immediate use A Walker Biological Safety Cabinet is a type of biosafety cabinet (BSC) designed and manufactured by Walker, a company that specializes in laboratory containment equipment. These cabinets are used in laboratories to provide a controlled, contaminant-free environment for handling potentially hazardous biological materials. What Is a Biological Safety Cabinet? A Biological Safety Cabinet (BSC) is an enclosed, ventilated laboratory workspace designed to: Protect the user from exposure to biohazards, Protect the experiment or product from contamination, Csdpfxoxhfr Eo Aiijri Prevent environmental contamination. They achieve this through HEPA (High-Efficiency Particulate Air) filtration and controlled airflow systems. Walker Biological Safety Cabinet – Key Features HEPA-filtered airflow: Removes airborne particles and microorganisms. Laminar airflow: Provides a clean work area by maintaining unidirectional air movement. Front access sash: Allows operator access while maintaining airflow barrier. UV light for sterilization when not in use. Ergonomic design: For user comfort during long procedures.

Condition: like new (used), Year of construction: 2012, Apfel – Tool cabinet with four drawers suitable for long tools / reamers & deep-hole drills, etc. - Year of manufacture: 2012 - 3 x drawers, each 180 mm wide / load capacity 900 kg each - 1 x drawer, 300 mm wide / load capacity 1800 kg - Overall height: 2140 mm - Cabinet dimensions (W x H x D): 1040 x 2140 x 1300 mm - Empty weight: approx. 450 kg Errors and omissions excepted. Crodpfx Ais Afdgtoiji

Condition: used, Year of construction: 2012, This MIWE Thermo Express rack oven system consists of 2 ovens, each with 9 racks, thus offering excellent capacity for medium-sized bakeries. The ovens are heated with thermal oil, which provides excellent baking quality that is unparalleled. The ovens also have an automatic loading and unloading system, making baking a breeze. consisting of: 2x MIWE Thermo Express rack ovens Credpfx Ae Ahwvboiioi 9 racks per oven Total baking area: 68.4 m² MIWE Athlet B330S automatic loading and unloading system Including exhaust system at the loader Central control unit Heating boiler central unit HKZ350

Condition: new, Year of construction: 2026, functionality: fully functional, MP160 Pressure Parts Washer – Precision Cleaning with a Closed-Loop System The MP160 pressure parts washer is a professional machine designed for intensive cleaning of industrial, workshop, and automotive components. The enclosed working cabinet, operating pressure of 5–8 bar, and the ability to heat the detergent to 70°C ensure effective removal of oils, grease, carbon deposits, process residues, and other stubborn contaminants. The closed-loop system allows the cleaning solution to be reused, reducing detergent consumption and helping maintain a cleaner, more organized workplace. The MP160 is ideal for cleaning components with complex shapes, narrow channels, recesses, and other hard-to-reach surfaces. Key Advantages of the MP160 Parts Washer 5–8 bar operating pressure – enables effective removal of stubborn contaminants from components with complex geometries. Detergent heating up to 70°C – improves the effectiveness of the cleaning solution and helps reduce cleaning time. Closed-loop cleaning solution system – reduces detergent consumption and the amount of waste generated during operation. Dual-function cleaning gun – allows the application of cleaning solution with compressed air or blow-off cleaning using compressed air alone. Component drying function – after cleaning, components can be blown dry using compressed air. Operating pressure gauge – allows continuous monitoring of operating pressure. Clear control panel – provides independent control of the power supply and heating system. Steel cabinet construction – designed for regular use in workshops and industrial facilities. Adjustable leveling feet – ensure stable positioning and proper leveling of the workstation. Parts Cleaning Concentrate Included The MP160 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. For the best cleaning results, it is recommended to use an aqueous solution at a temperature of between 40 and 70°C. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Effective Cleaning of Hard-to-Reach Surfaces The pressure spray system allows the cleaning solution to be directed precisely onto contaminated areas. This makes the MP160 suitable for cleaning gaps, recesses, openings, channels, and components with irregular shapes. After cleaning, the operator can switch the gun to compressed-air-only mode. This makes it easier to remove residual cleaning solution from the component's surface and prepare parts for further servicing, inspection, assembly, or refurbishment. Cjdsztwkdepfx Aiiori Standard Equipment Dual-function gun for spraying cleaning solution and blow-off cleaning with compressed air Cleaning solution heating system Control panel Operating pressure gauge Adjustable stabilizing feet 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 160 l Maximum detergent temperature 70°C Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Overall dimensions 770 × 600 × 1,330 mm Weight 47 kg

Year of construction: 2024, condition: used, functionality: fully functional, Exhaust hood M4000 Technical specifications for each exhaust hood: Crodpo Ahmwyofx Aiiji Working width 4,000 mm Working height 3,000 mm Overall width 4,050 mm Overall height 3,050 mm Overall depth 750 mm Airflow rate 15,000 m³/h Fan 2 units, Atex Motor 2 x 3.6 kW, with Ex protection Scope of supply for the exhaust hood: 1 Exhaust hood housing, consisting of modules, entirely made of galvanized sheet metal 1 Set of labyrinthine pre-filters made of paper 1 Set of filter mounting frames with filter material made of glass fiber 2 Radial fans with spark protection, Ex protection

Condition: used, Year of construction: 2017, Picking cabinet Manufacturer: MATRIX Type: MAXI Credpfx Aie Agpdrsiji Year of manufacture: 2017 Technical details: Operating voltage: 230 V Current consumption: 5.3 A Mains frequency: 50/60 Hz Condition: used Accessories, tools, and clamping devices shown are included in the scope of delivery only if this is explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: used, Year of construction: 2002, Motan CS S7 315 DP (2002) Full Control Cabinet (Komplet or for spare parts) Motan Central Control Cabinet CS S7 315 DP with Siemens S7-300 PLC & OP7 Panel Motan industrial control cabinet (Type CS S7 315 DP) previously used for central plastic drying/conveying system control. Fully equipped with Siemens SIMATIC S7-300 PLC components and operator panel. Ideal as a replacement unit or for industrial spare parts. Key Technical Components Included: 1. PLC CPU: Siemens SIMATIC S7-300 CPU 315-2 DP (6ES7315-2AH14-0AB0) 2. Operator Panel: Siemens SIMATIC OP7-DP (6AV3 607-1JC20-0AX1) 3. Power Supply: Siemens SITOP power 10 (24V DC / 10A, 6EP1434-2BA00) 4. Cabinet Manufacturer: Motan GmbH (Project No.: 02P001282) Credpfx Aie Ah Hv Toioi 5. Standards Compliance: Tested according to DIN EN 60204 (VDE 0113)

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, type of input current: three-phase, overall weight: 400 kg, input voltage: 400 V, suction capacity: 6,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Oil mist and fume extraction unit for CNC machines, Plymovent brand separator filter. Designed for purifying air from metalworking processes involving high-viscosity, contaminated, or burnt oil, including: CNC machines for cutting, drilling, and sharpening; metal forming machines; oil mist generated by heat and surface treatment. Cedps Ad Dnbefx Aiieri Simple to operate and reliable filter design. Filter housing made of galvanized steel sheet coated with powder paint. The filter is equipped with a pressure gauge indicating the filling level of the filter element. Fan in a sound-absorbing housing, 4 kW (three-phase) POWER: FA-6000 Capacity up to 6000 m3/h Inlet diameter - 250 mm Dimensions: Filtration unit: 0.85m x 0.70m x h-2.41m Fan: 1.20m x 1.10m x h-1.30m Stock number: 0027

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, OILING LINE FOR SOLID WOOD PANELS Csdpez D E Icefx Aiieri