Used Chop Cutters for sale (2,940)

Condition: excellent (used), Year of construction: 2018, Marel Treif Puma 700 E/EB (HS) slicer chop cutter. In superb, near new condition. Bought by a large supermarket owned factory but has been in storage for many years. I am not sure if it has ever been used. Gjdpfxox Dcpge Ab Djit

Condition: like new (used), The factory where we bought this from say that they never used the machine from new, it has sat in storage ever since it was delivered. Gijdpox Axa Sofx Ab Dot

Condition: excellent (used), Almost in new condition, this Treif slicer can be used on boneless or bone in products. Pork loins, bacon, sirloin steaks etc. Can cut from as low as a few mm thick. Giedpfxex Awy Do Ab Dot

Condition: excellent (used), Year of construction: 2015, Tipper Tie TTChop 20 Cutter Giedpfx Ajv Eamceb Djt Based on more than 130 years of experience in design and a keen sense of innovation, the TTChop cutter generation TIPPER TIE sets new standards in grinding technology. TTChop20 combines functionality and advanced technology. This is an extremely versatile and yet specialized machine for each individual application. The production of raw coarse or fine sausages, tender boiled sausages or emulsions brings the same remarkable results as gentle mixing and dipping of a wide variety of components. Comes with a lot of extra knifesets. Manufacturer: Tipper Tie Model: TTChop 20 Year: 2015 Production Hours: 9.338 hours Capacity: 200 liter Max. load elevator: 250 kg. Power: 400V / 50Hz / 98kW Machine Dimensions LxWxH: 3.250x2.600x2.200 mm Machine Weight: 4.100 kg.

Condition: refurbished (used), Hand corn cutters 10 pcs for sale - Type: A&K - Second-hand, refurbished Gijdsyxnqbjpfx Ab Djt - Includes 1 new cutterhead - Without knives FCA Debrecen

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 98 h, nominal power: 49.28 kW (67.00 HP), machine/vehicle number: 1VR91125KN1004048, Equipment: CE marking, Trench cutter with only 98 operating hours! TECHNICAL DETAILS Milling depth: 120 cm Milling width: 15 cm MACHINE DETAILS Net power: 50 kW Weight (according to type plate): 4,740 kg Tractor Tractor weight: 2,663 kg Tractor length: 320 cm Giedjy Htgqspfx Ab Dst Tractor width: 197 cm Height: 250 cm Max. transport speed: 10 km/h Milling boom Transport length: 207 cm Offset range: 61 cm Own weight without milling chain and boom: 690 kg Deutz diesel engine TD 2.9L Tier IV Final/Stage V Engine output: 67 hp Torque: 235 Nm System pressure: 350 bar Pump output: 117 L/min Operating hours: 98 h EQUIPMENT Side-shiftable milling boom Large idler wheel Standard SHARK - COMBO milling chain CE certificate

Condition: good (used), Ram Punch Gerhard Busch CL Label die cutter Professional machine made in Germany. Very good condition, ready to operate. Bush is a leader in the production of labeling machines and pushers. 100% functional, with no signs of wear. Technical specifications: Max. format: 330x380mm Min. format: 130x180mm Cycles: 8/min Stroke length: 180mm Capacity: 400,000 sheets/h Installed power: 15kW Weight: 2600 kg The machine is equipped with a quick-action hydraulic unit. Safety guards, photocells activating automatic operation, and quick-adjustable die-cutting clamps with a crank. Angle adjustment of the entire head, piston stroke adjustment, and table adjustment. Feeder table adjustable in all planes. Godpfxjy Sfbks Ab Deit Two operating modes: automatic and manual. Tail on the delivery. Tool kit, conveyor belt for removing waste to the container. Made in Germany.

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change Godowgc I Ropfx Ab Deit • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-062, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Godpfx Abjwrn Iye Djit Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Gsdpfx Ajif Ek Rsb Deit Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis Godpfx Abofhgvwj Doit 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter Gijdpfofnlkwox Ab Det • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, POLAR 78 paper cutter, fully overhauled – year 1999 Gsdpfjy Sf Ahjx Ab Dsit

Condition: good (used), Uchida Aero Cut One Creaser, Slitter, and Cutter The machine is fully operational and ready for production. Description: The AeroCut One cuts, perforates, and creases sheets in a single pass. Only one person is needed to operate the device, significantly improving work efficiency and, consequently, reducing costs. The device is programmed using an intuitive touchscreen control panel. Cutting, creasing, perforating Maximum paper size – 370 x 520 mm Min. paper capacity – 55 x 45 mm Maximum grammage – 400 g/m² Speed ​​– 11,130 business cards/h Paper types – offset, coated paper, varnished Feed – belt with adjustable vacuum Gisdpfjy Nzk Nox Ab Djt Creasing – strip-type Memory – 263 programs + 150 user-defined Touchscreen programming PC connectivity Double-feed detection Weight: 240 kg Power supply: 230 V Made in Japan.

Condition: like new (used), Year of construction: 2023, machine/vehicle number: IV68/ IV78 /V88, functionality: fully functional, operating hours: 30 h, Professional Cutter Set for Spindle Moulder / Edger – Double-glazed Timber Frame, Like New For sale: complete set of interchangeable carbide cutters from Lehmann – Caul (Tool Experience), used only 3 times for manufacturing IV68 timber frames. This lot includes a full range of carpentry tools suitable for profiling and machining double-glazed timber frames: ✔ Opening cutters (A1, A2, A3, A4, A8, A9, A10) ✔ Fixed frame cutters (B1, B2, B3, B5, B6, B8, B10) ✔ Complementary/Counter-profile cutters (C1, C2, C4, C5, C8) ✔ Special tooling (e.g. D4) ✔ Professional-grade reversible carbide knives ✔ Several reducing rings All tools are fully compatible and modular—no missing parts for standard timber frame manufacturing. New value: €15,340 (with invoice) — Gedpfx Abex Dmgis Djit 🔹 Condition: Excellent / barely used 🔹 Bore: 60 mm (majority of cutters) 🔹 Diameters: from 197 mm to 353 mm depending on model 🔹 Suitable for industrial spindle moulders, production optimized Why this is an opportunity: ✨ Complete ready-to-use set ✨ Condition like new ✨ Perfect for professional joiners or manufacturers ✨ Immediate productivity boost ✨ High new purchase value — Who is this for: ✔ Timber joiners ✔ Door and window manufacturing workshops ✔ SMEs or craftsmen seeking a professional-grade set ✔ High-end tool collection Further information: 📍 Collection in person possible 📦 Professionally packed for shipping 📸 Detailed photos available on request

Condition: used, machine/vehicle number: 007393, Max width workable: 2500 mm Gedpowkrqisfx Ab Djit

Condition: new, functionality: fully functional, Fabr. Vergnano - 4 pcs pre-grinding solid steel hob cutters EGW 20 New - unused Cutting material - grade MC90 HRC 67+68 Alcrona coating Solid steel hob cutter 40x60x16 Hob cutter (Ø 40x60, bore Ø 16, roughing cutter, overlap) Solid steel hob cutter Fabr. Saazor - 6 pcs, cutting material carbide K-grade + TiAlN Carbide cutters made of HM K-grade material EGW 20, mod 0.8 Ø40x60, bore Ø16 All cutters are new and unused in original packaging Gijdpfx Abewb Dfae Dst Price on request All technical data subject to typographical errors/mistakes Sale exclusively to EU countries.

Condition: good (used), overall weight: 1,200 kg, Machine equipment as required available for an additional charge – almost anything is possible. We specialize in retrofitting Jungner machines. Giodpfx Aetwpyysb Djt

Condition: good (used), Oerlikon Type: Optitome² 2040 HPi / CPQ170628608 Dimensions: Length: approx. 5325 mm, Width: approx. 3050 mm, Height: approx. 2000 mm (machine body) Max. cutting area: 1000 × 2000 mm, 1500 × 3000 mm, 2000 × 4000 mm Max. material thickness: 50 mm Longitudinal drive X-axis: dual-sided brushless 300 W motors, maintenance-free precision gearboxes Transverse drive Y-axis: brushless 300 W motor, maintenance-free precision gearbox Mechanical guidance: linear guides on all axes Positioning speed: 15 m/min Cutting speed: 10 m/min Positioning accuracy: ±0.1 mm Cutting table: sections of 600 mm each, pneumatic extraction control, diffuse extraction Support grids: 100 – 150 mm Plasma unit: NERTAJET HPI 300 / 300A / NERTAJET 50 Oxy-fuel cutting: up to 50 mm cutting thickness Cutting current: 15 – 300 A Plasma power source output: 82 kVA Duty cycle: 100 % Plasma unit dimensions: approx. 820 × 710 × 930 mm Gedpfsy Nay Aex Ab Deit Plasma unit weight: approx. 350 kg Protection class: IP21 Chiller capacity: 2475 W Tank capacity: 30 l Power supply: 230 V Power input: 1.7 kW Chiller weight: 65 kg Dust extractor air flow: 5,000 – 8,000 m³/h Pressure: 3,100 – 2,400 Pa Filter class: H13 Separation efficiency: 99.9987% Total weight: approx. 3600 kg Condition: used (machine as shown in images) Scope of delivery: (See image) (Specifications and technical details subject to change and errors!) For any further questions, please feel free to contact us by phone.

Condition: used, machine/vehicle number: 004877, Max width workable: 1300 mm Gedswcx Ufopfx Ab Deit

Condition: used, Year of construction: 1989, This Wacker joint cutter, model DFS 90, is being offered in our industrial auction / machinery auction: Collective online auction for construction equipment - building materials - vehicles - site equipment - garden machinery. Giedpoy I Na Ajfx Ab Det

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, with new upgraded electronics + laser safety guard. Equipment: - heated plate - pneumatic clutch and brake - operator control panel - 3 operating modes: single, continuous, time-delayed opening - central lubrication - additional safety covers - maintenance tools - hardened pressure sheet Gsdpfxey Rumys Ab Djit

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening Gedpfjy Rummsx Ab Deit – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Gsdpfxey Rumao Ab Dsit Equipment: – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: – pneumatic clutch and brake Giodpfey Rulvox Ab Dst – control panel – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening – central lubrication – additional safety guards – operation tools – hardened pressure plate