Used Metal Chips for sale (36,387)

Condition: used, Revolver Briquetting Press RUF Type RBK 55/2500/120 S Hydraulic pellet press or briquetting press for grinding sludge ALU chips, metal shavings, or similar materials Serial No. 70002 Year of manufacture: 2009 Briquette diameter: 120 mm Briquette length in pre-compactor: approx. 120 mm Pressing force in pre-compactor: 30 tons at 260 bar Briquette length in main compactor: approx. 80 mm Main press cylinder force: 250 tons at 260 bar Main press cylinder stroke: 120 mm Counter press cylinder force: 250 tons at 260 bar Counter press cylinder stroke: 15 mm Main press cylinder piston diameter: 350 mm Press cycle time: approx. 30 sec. with grinding sludge with low residual oil content Hopper size of screw conveyor: 1000 x 600 mm Hydraulic motor power: 37 kW Electrical connection: 400 V, 50 Hz, 45 kW - Revolver with 5 stations for high material throughput - Pre-compaction stage for feeding material into the revolver disk - 2 opposing main press cylinders with 120 mm and 15 mm stroke - Ejector cylinder for discharging finished briquettes from the revolver disk - Infinitely variable hydraulic speed adjustment for each pressing stage - Previously used for grinding sludge from metalworking - Material bunker as a hopper with screw conveyor - In 2018, the machine was fully overhauled by RUF - In 2020, a new SIEMENS Simatic touch panel was installed - Only a few operating hours since overhaul Very good condition Grinding Sludge Recycling - Major cost savings through coolant recovery - Significant reduction in disposal costs thanks to volume and weight reduction of grinding sludge - Grinding sludge briquettes with low residual oil content may potentially be classified as 'non-hazardous waste.' Practical test on 15.01.2026 with aluminum shavings: With optimized parameters, the machine achieves a pressing output of 230 kg aluminum chips per hour. Iedshg Uz Ispfx Ah Njht A further increase in performance appears possible in principle, but could not be verified due to lack of material. (see video)

Condition: like new (used), Year of construction: 2002, operating hours: 20 h, Used only for experimental purposes, only 20 hours, after which the previous owner went bankrupt. Ihjdpswdgalofx Ah Nst Throughput for aluminum chips: 500 kg/h. Hydraulic motor: 55 kW. Fed from two sides with a storage container via a screw conveyor. Today's new price for a comparable press is approximately €240,000.

Condition: used, Year of construction: 2019, functionality: fully functional, total height: 5,000 mm, total width: 5,000 mm, total length: 10,000 mm, We are selling this chip processing plant from SPYRA. Coarse metal parts (tramp metal) in the chips, which can cause malfunctions and operational disruptions in conventional centrifuges and chip crushers, are no problem for SPYRA machines and systems! Year of manufacture: 2019 Plant components: - Chip shredder - Chip centrifuge (for de-oiling) - Lifting and tilting device (for filling the chip crusher) - Conveyor belt (from the chip crusher to the centrifuge) - Swivel conveyor belt after the centrifuge (for filling several containers) - Control cabinet The machines in the system can be set up in various ways, so the dimensions are not fixed. The system comes with complete documentation, including drawings, operating instructions, etc. for all system components. If you have any photo requests for specific parts, please let us know exactly which ones you would like us to send you. This also applies to any further information about the system. If you are interested, please send us a realistic offer. Ihodpfx Asxpwy Rjh Njt The system can be viewed before purchase in 78554 Aldingen (Germany).

Condition: used, Chip conveyor, scraper conveyor with coolant tank BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Metal link width: 200 mm Pitch between scrapers: approx. 380 mm Possible chip removal length: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Iedpfx Ahshwt H Ao Noht Hopper width (top): 400 mm Hopper width (bottom): 170 mm Conveying height - discharge height: approx. 1250 mm Motor power belt drive: 0.37 kW Power supply: 400 Volt, 50 Hz - Scraper chain driven by geared motor - Coolant tank without coolant pump Required space (L x W x H): 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for chip transport from a milling machine, lathe, or machining center.

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Iodpfx Aephvl Tsh Noht Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Condition: ready for operation (used), With hydraulic pump. Ijdpfxshw E D Sj Ah Nsht

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, Wood chipper Zeno ZTH 800/820-300 + Mesutronic metal detector Year of production: 2015 Technical condition: perfect, used only for 3 weeks Ihjdpox N Ufmsfx Ah Not Technical data: * Infeed width: 820 mm * Infeed height: 300 mm * Rotor with 2 knives * Main motor: 90 kW * Weight: 10 tons

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, compact cylinder -Manufacturer: Metal Work, compact cylinder tray sealing machine Inauen VC999/ TS 1200 N -Type: 121AA20160ZP Ihjdpfx Aom Hd Rzoh Njt -Stroke: 160mm -Piston: Ø 120 mm -Piston rod: Ø 32 mm / M27 x 2 -Dimensions: 445/135/H135 mm -Weight: 9.6kg

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 723 mm high 700 mm deep Ihedpfx Ahohq Txho Njt 04x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 03x steel shelves, new dimension: 300 x 700 mm Type: H29/D 02x swivel castors, new 02x brake/steering rollers, new 01x angle set, new for mounting the worktop 08x safety hook, new Material color: compl. galvanized

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Ihsdpfshq Twysx Ah Njt Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 888 mm high 700 mm deep 04x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 03x steel shelves, new dimension: 300 x 700 mm Type: H29/D 01x Angle set, new for fixing the worktop 08x safety hook, new Material color: compl. galvanized

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 723 mm high 700 mm deep 02x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 02x swivel castors, new 02x brake / swivel castors, new Ihedshq Txwspfx Ah Net 01x angle set, new for mounting the worktop 04x safety hook, new Material color: compl. galvanized

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 888 mm high 700 mm deep 02x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 01x angle set, new for fixing the worktop Ihedpfxohq Tqdo Ah Njt 04x safety hook, new Material color: compl. galvanized

Condition: good (used), Technical data for pallet rack beam: Racking system: Metall Sistem Type: Unipal Scope of delivery includes: 01x pallet rack beam, used Iedpfxoxb Tp Ej Ah Neht Material color: yellow Box profile: 140 x 45 mm Clear width: 1,800 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur extra costs, which can be quoted separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Ihedpfx Ahek Hz Nqj Njt Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Series: GS-CEH Iedswxar Depfx Ah Noht Type: Exchange table, full protection, full protection exchange table Laser power: 3KW, 6KW.12KW, 15KW, 20KW Standard hardware: Scrap car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, rear lift light-blocking door, beam light curtain, partition dust removal Optional hardware: Fire bricks, high-pressure proportional valve (standard above 6KW), safety door lock, independent laser cabinet, rear exchange table light curtain, rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, light-blocking rubber strip Optional functions: FDA configuration CSA configuration, TUV configuration conventional CE configuration

Condition: used, Ref: MM6192 Safeline Signature metal detector with pneumatic push-arm reject system into a lockable bin. This unit is fitted with a full retail kit so meets all retail specifications. Model - Signature 30H. Serial number - 11410. Aperture dimensions - 360mm wide x 120mm high. Belt dimensions - 2000mm long x 300mm wide. Ihedpfx Ahox Emkyo Njt Electric supply - 100-240 V / 50-60 hz / 1 phase.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Equipment model: NS56FG Ihedpfx Aheww Umae Not Maximum tubelength:

Condition: new, functionality: fully functional, Year of construction: 2025, table width: 4,120 mm, working width: 2,530 mm, travel distance Y-axis: 6,020 mm, travel distance Z-axis: 450 mm, type of input current: three-phase, overall weight: 14,200 kg, warranty duration: 24 months, working range: 6,225 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, All New Full Cover Fiber Laser Cutting Machine | GS-CE PRO Series | 6000-40000W MACHINE AVAILABLE ON HAND This GS-CE series FULL COVER FIBER LASER CUTTING MACHINE offers maximum safety for metals cutting. Thanks to its full cover structure and protective glass observation window, you can observe the operation and avoid hazards such as laser radiation, sparks, etc. It also has a fast exchange table, and the exchange is within 10s. It will be your ideal solution for safe and efficient metal cutting! Working platform size: 3000mm*1500mm, 4000mm*2000mm, 6000mm*2000mm, 6000mm*2500mm;8000mm*2500mm;12000mm*2500mm; Laser power 6KW-40KW GS-6225CE PRO Max. Acceleration：3G Intelligent anti-collision function Automatic lubrication Laser fault alarm Cooling fault alarm Laser protection glass Water cooler TÜV CE certificate Optional function: automatic loading and unloading system Control unit supports graphic formats: AI, BMP, Dst, Dwg, DXF, DXP External programming Isdpfxevzwh No Ah Noht System complete incl. cooler, extraction system and safety light barriers Demonstration machine as good as new

Condition: used, Rain gutter, downpipe and elbow forming machines, complete line. Three machines. 1. Rain gutter forming machine, strip cutting with band saw. Produced gutter diameter: 80 x 100 mm Used sheet metal dimensions: Width: 350 mm. Thickness: 0.43 – 0.55 mm. 2. Downpipe forming machine, can form 127 mm and 152 mm (standard) sizes. Cutting with guillotine. Isdpfxov Evcts Ah Neht Used sheet metal dimensions: Width: 300 mm. Thickness: 0.43 – 0.55 mm. 3. Elbow forming machine: 400V/3 If you have any further questions, we will be happy to answer them.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 30,000 W, travel distance X-axis: 3,050 mm, travel distance Y-axis: 13,050 mm, travel distance Z-axis: 450 mm, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 20,000 kg, input frequency: 50 Hz, total length: 16,800 mm, total width: 2,200 mm, total height: 5,120 mm, warranty duration: 24 months, working range: 13,000 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, GS-CL Series, Glorystar Single Table Gantry Type Metal Laser Cutting Machine Laser Power: 12000-80000W Fits in a standard 40HQ container The GS-L Series is a high-power metal laser cutting machine with a gantry-type segmented bed design. It can be freely customized to meet processing format requirements according to customer needs. Key Features: ● Super Large Processing Format with a gantry-style segmented design. Ihjdpfsvmwn Hox Ah Not ● The GS-L Series has the largest Z-axis travel and height in its class in the industry. Supports extreme thickness cutting for plates over 20mm. Capable of cutting ultra-thick plates up to 70mm. ● High Negative Pressure Automatic Partition Dust Removal ● Equipped with a high-air-volume fan for effective dust removal. Technical parameters: Working area (mm): 13000mm*3000mm（bevel cut: 12500mm*2500mm） X axis travel distance (mm): 3050mm Y axis travel distance (mm): 13050mm Z axis travel distance (mm): 450mm X/Y axis positioning accuracy: ≤0.03mm/m X/Y axis repeat positioning accuracy: ≤±0.02mm Max. synthetic positioning speed: 110m/min Max. acceleration: 1.2G Min. setting unit: 0.001mm Floor size (mm): 18500mm*6500mm Main body dimension (mm): 16800mm*5120mm*2200mm Worktable max. weight capacity (T): 20 tons (even load bearing)

Condition: used, Ishida Checkweigher and Metal Detector Fully stainless steel Reject bin Ijdpfxsxtfyme Ah Nsht Weighing range - 0 to 1200 grams 240 volts

Condition: good (used), Fortress Phantom Metal Detector Fully stainless steel Aperture 500mm wide x 225mm high Iodpfjxtfw Sjx Ah Njht 1500mm long Belt Stop and alarm Video available on request

Condition: excellent (used), Machine: Used Lindemann Sobod 8 Metal Baler Bale size: 400mm x 400mm Ihodpfsxrz S Asx Ah Njt Specifications: see table Status: ready to use Condition: in very good maintenance condition Year of manufacture: unknown Power: electric Availability: March/April 2025

Condition: used, Year of construction: 2003, LARCON METAL Model: LIJADORA DE RODILLO Number: 29 Ihsdpfx Aoxrz Nbjh Not Year of construction: 2003 kW: 4 RPM: 1500

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm Iedpfx Asxdmgveh Noht CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm