Used Chip Bonnet for sale (5,203)

Year of construction: 1996, condition: used, Applicable material: Food Power: 1 kW (1 HP) Iisdpfox Akr Hox Affok Volume: 30 l Manufacturer : BonnetModel: MX 30 SYear: 1996Type : Kneading machinePower: 1 KWVolume: 30 LBowl: stainless steelMixing tool: aluminum alloy (operational: wear mark / crack)

Condition: excellent (used), -Dimensions: 920x861x898 mm -Four combination steam/air Iiedswx Rxbjpfx Affek -6 levels spaced 83 mm apart -Panoramic glass door -Voltage: 220V -Power: 9.3 kW -Overhauled equipment: the equipment is prepared upon order; collection and return times are agreed at that moment (please ask for the price after overhaul).

Condition: good (used), Year of construction: 1990, Radial fan, chip extraction blower, fan, extraction, chip blower -Radial fan in galvanized housing with sound insulation Iiedpeb A H Rasfx Affsk -Engine power: 30 kW -Speed: 2920 rpm -Volume flow: 36000 m³/h -Total pressure: 1600 Pa -Inlet connection: Ø 800 mm -Outlet connection: Ø 750 x 600 mm -Dimensions: 2500/2350/H2700 mm -Weight: approx. 1500 kg

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: Nr.50086, New machine for sale due to circumstances: 6 connection points with ventilation duct. Collection only! Price ex location 31637 Rodewald. Iedpfxow Uf S He Affjik

Condition: good (used), Year of construction: 1982, Chip conveyor, Manufacturer: SILISTRA, Type: TCA 280X4710, year 1982, with coolant pump. Was previously connected to a CNC boring mill. Overall length: 5200 mm Neck width: 410 mm Neck height: 220 mm Neck length: 4700 mm Iiedjwnpngspfx Affsk Discharge height: 800 mm Total height: 1100 mm Weight approx. 1200 kg. In good condition.

Condition: new, Year of construction: 2025, Industrial Dust Extractor DCV5200E+ – Maximum Performance in a Compact Design The professional industrial dust extractor DCV5200E+ is designed for the most demanding work environments. This high-efficiency unit is intended for removing sawdust, dust, and chips from woodworking machines, ensuring consistent extraction performance throughout the entire production cycle. Thanks to its compact design and strong suction power, the central dust extractor works perfectly both as a standalone machine and as a part of a multi-point extraction system. Key Advantages of the Machine Automatic filter-shaking system – ensures uninterrupted performance without the need for manual maintenance. Stable, hardened construction – eliminates vibrations and noise, ensuring long-lasting durability. Dynamically balanced metal impeller – quiet operation and failure-free performance in continuous use. 200 mm suction port – optimized airflow and increased extraction efficiency. 18 polyester filters – effective filtration of particles down to 5 microns, with optional HEPA filters available. Hermetically sealed plastic containers – quick replacement and 99.99% system tightness. Construction and Technology The DCV5200E+ is based on a proven, modular design with high rigidity and resistance to deformation. Thanks to the high tightness of the suction system, the machine efficiently extracts air without energy loss – which is especially important during the heating season. The fan blades feature optimized geometry, ensuring low energy consumption while maintaining maximum airflow efficiency. Precision and Work Efficiency The 3 kW three-phase motor delivers up to 5200 m³/h capacity and a suction speed of 30 m/s. This configuration allows several woodworking machines to be connected simultaneously without a drop in efficiency. It is ideal as a central extractor in high-dust production lines. Applications The DCV5200E+ dust extractor is intended for professional use in woodworking shops, furniture factories, and CNC production lines. It works effectively with: panel and sliding table saws, sanders and edgebanders, band saws and table saws, milling machines and thicknessers. Standard Equipment 18 polyester filters (5 microns) metal impeller and impeller housing hermetically sealed plastic containers integrated filter cleaning system Optional Equipment HEPA filter for particles below 1 micron Iedpfsx Hh Iiex Affsik extraction hoses and system connectors fill-level sensors Technical Specifications Parameter Value Motor power S1 3 kW / 400 V, 50 Hz Motor speed 3000 rpm Extraction capacity 5200 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 200 mm Suction speed 30 m/s Number of filters 18 Filter material Polyester (5 microns) Filter surface area 10 m² Dimensions (L × W × H) 2441 × 940 × 2270 mm Weight 260 kg

Condition: used, mileage: 975,000 km, Year of construction: 2014, Serial number: YS2R6X2000535xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21248 Specifications: Delivered with new EU inspection 2014 model Approx. 975,000 km Opticruise gearbox Full air suspension Tires (see photos) 2-way tipping Euro 6 Length: 860 cm Width: 255 cm Wheelbase: 410 / 135 cm Curb weight: 13,570 kg 6x2 581 hp Tow hitch Toolbox Autoline S90 sand spreaders High-beam auxiliary lights 2 x rotating beacons Minor damage to passenger-side step (see photos) 2 x beds Radio/CD Air conditioning Description:Scania R580 6x2 chip truck with 2-way tipping bed from 2014 for sale.The truck is in daily operation and will be delivered with a fresh EU inspection.A 2012 3-axle chip trailer can be included for an additional cost. Ijdpfx Afjw Ucivjfeik Delivery by agreement. Km: 975000 HK: 580 Technical approved: Yes EU-approved until: 14.10.2026 Own weight: 13570 Total Weight: 28000 Payload: 14355 Width: 255 Length: 860 Euro: 6 Model: R580 Gearbox: Automatic

Condition: good (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22.12.2221, Equipment: chip conveyor, Chip conveyor that fits PUMA DNT 2600M from SARIGOL. Isdpfxju Up Dkj Affsik

Condition: good (used), Year of construction: 2001, Radial fan, chip extraction fan, fan, extraction, chip blower, high-performance fan Iisdpfx Aev Iqrzjffsk -Engine power: 30 kW -Speed: 1475 rpm -Volume flow: 23150 m³/h -Total pressure: 2719 Pa -Connection input: Ø 550 mm -Connection output: Ø 550 mm -Impeller: Ø 760 x 200 mm -Dimensions: 905/1950/H1790 mm -Weight: 622 kg

Condition: new, Year of construction: 2025, saw blade diameter: 600 mm, grinding wheel diameter: 30 mm, compressed air connection: 5 bar, New saw blade grinding machine - chip divider groove grinding machine. Grinding range approx. 120-600 mm diameter Saw blade tooth pitch max. approx. 22 mm Control: Siemens PLC with automatic shut-off after grinding process Grinding spindle: High-frequency spindle, 24,000 rpm, power 800 watts! Cooling: Minimum quantity lubrication Saw blade clamping: pneumatic Gearbox: oil-bath lubrication Saw blade thickness adjustment: via backlash-free preloaded ball screw Grinding stroke: via heavy-duty linear roller guide Iedpfx Afoqpdi Rsfsik Accessories: - 1 set of reducing rings 16x22,25,32,40,50 mm - Circuit diagrams - Grinding wheel 30x0.3x6 mm, CBN Operating voltage: 400V, 50 Hz Compressed air connection: required for saw blade clamping (very low air consumption)

Condition: used, Year of construction: 2013, Chip conveyor, manufacturer BMF - BÜRENER, with filter system and high-pressure pump. Chip conveyor dimensions: Iisdpfeiicnkjx Affok Neck width: 600 mm, neck height: 200 mm, conveyor length: 3000 mm.

Condition: new, Year of construction: 2025, Metal Dust, Chips and Shavings Extractor MDC800 230V The MDC800 metal extractor is a professional device designed for effective extraction of chips, shavings and dust generated during metalworking processes. Its high efficiency, robust construction and easy operation make it a reliable piece of equipment for grinding and production workstations requiring constant cleanliness control. Key Advantages of the Machine High extraction efficiency – an airflow of up to 1800 m³/h ensures effective removal of even large volumes of metal chips. Versatile application – ideal as a chip extractor, grinder extractor, polisher extractor or for other metalworking equipment. Compact and stable construction – the rigid housing ensures safe operation and minimizes vibrations. Quick access to the container – makes emptying easier and reduces downtime. Easy filter replacement – quick and convenient access. Construction and Technology The MDC800 is designed for intensive and continuous industrial operation. The robust 0.75 kW motor runs at 2800 rpm, providing a constant and stable airflow. The dual 100 mm suction inlet system allows simultaneous connection of two workstations, significantly increasing work efficiency. The large impeller diameter of 325 mm improves the system’s aerodynamic performance and enables extraction of larger metal chip fractions without the risk of clogging. A spacious collection container ensures long operating cycles without frequent emptying. Precision and Work Efficiency The MDC800 metal chip extractor provides even and stable airflow with both single and dual inlets. The performance of 1800 m³/h (single inlet) and 1520 m³/h (dual inlet) ensures effective capture of contaminants generated during grinding, drilling, milling and other machining operations. Applications The device is ideal as a: extractor for bench and belt grinders, metal chip and shaving extractor in locksmith workshops, metal dust extraction system in tool shops, extraction unit for polishing and deburring processes. Standard Equipment Isdpjx E Udhefx Affsik large-capacity chip container, replaceable filter, dual suction inlet 2 × 100 mm, stable, compact steel casing. Technical Data Specification Value Motor 0.75 kW, 230V Speed 2800 rpm Suction inlets 2 × 100 mm Airflow (single inlet) 1800 m³/h Airflow (dual inlet) 1520 m³/h Impeller diameter 325 mm Chip bag size 330 × 500 mm Dimensions 580 × 480 × 1016 mm Weight 55 kg

Condition: ready for operation (used), A high-performance extraction system Pressta Eisele for aluminum chips is available. Filter class: M, max. filling height: 1100mm, max. air volume flow: 4000m³/h, negative pressure: 30mbar, machine dimensions X/Y/Z: approx. 1850mm/1150mm/4700mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Iiedpfjx Dcafjx Affek

Condition: refurbished (used), Chip conveyor MAYFRAN MT-10 for OKUMA LR-15 lathe Iijdpfxox Aggao Affjk

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Motor power: 15 kW -Inlet connection: Ø 350 mm -Outlet connection: Ø 250 mm -Dimensions: 1050/1060/H1240 mm -Weight: 276 kg Iiodpfx Afjb Ig Ugsfsk

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: Iisdpfx Ajwp Rqfjffek • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: like new (used), Year of construction: 2019, operating hours: 900 h, functionality: fully functional, As-new AL-KO POWER UNIT 300P dust extraction filter, 2019 Acquired just before the pandemic as a dust extraction system for a CNC machine. Very little usage, under 900 operating hours. The Biesse Rover milling machine is also for sale in a separate listing. Buyer is responsible for dismantling and removal of the unit. The AL-KO Power Unit is a highly efficient, enclosed filter system equipped with a clean-air side fan. The system complies with H3 filtration class requirements: return air dust concentration is below 0.1 mg/m³. Supplied fully assembled for easy and fast installation and commissioning. Dust is collected into containers beneath the filter, enabling simple removal of shavings from under the machine. The filtered air can be returned to the workshop or discharged outside via a dedicated duct system. The enclosed design ensures low operating noise and a dust-free environment around the unit. The dust concentration of the return air is just one tenth compared to conventional bag-type extractors! Iisdjxz Rg Iopfx Affjk Filter cleaning is performed automatically with compressed air or mechanically via shaker devices. Automatic cleaning is controlled by a vacuum sensor. Post-cleaning is performed when the unit is switched off. The filter media is Class C and features antistatic properties. Filter bag replacement is quick and easy via the light-opening roof panel on the filter. By positioning the extraction fan on the clean-air side, the system offers advantages over conventional units in terms of fire safety, noise level, and maintenance-free operation. Mechanical pre-separation of chips reduces wear on the filter media and lowers the filter load, ensuring maximum filtration efficiency. The Power Unit series achieves noise levels as low as 69 dB! In addition to wood, AL-KO dust extraction systems are also suitable for other machinable materials such as plastics, stone, cement, gypsum, and aluminium. POWER UNIT 300P - Extraction port D 300 mm, max. air flow 6,000 m³/h - Motor power 7.5 kW – filter area 30 m², collection containers 3x250 l - Includes compressed air cleaning - Includes automatic shutoff system

Condition: new, Year of construction: 2025, The manufacturer guarantees the quality of purification. A certified control cabinet allows for constant monitoring of the correctness of operation. The negative pressure fan 11 kW / 11300 m3/h, operates on the turbine principle, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Advantages of DCV dust extractors Durable, massive construction guaranteeing quiet and vibration-free operation of the dust absorber the new TC series of extractors has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility of building a ceiling system and connecting several machines working simultaneously with DCV extractors Failure-free filter shaking system with the possibility of working in an automatic cycle Mobile drive system facilitating trouble-free movement of extractors throughout the plant Waste containers designed in such a way as to maintain 99.99% airtightness of the system, have also been equipped with a mobile system mobile Control cabinet for switching the device on/off The polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters Supply voltage 400 V Iisdpfxoudalws Affek Power 11 kW Engine speed 3000 rpm Filter type Polyester Filter dimensions Φ160 x 960 mm Number of filters 64 pieces Inlet diameter 350 mm Outlet diameter 500 mm Efficiency 11300 m3/h Dimensions (width x length x height) 1190 x 3160 x 2320 mm (without upper elbow) Net weight 710 kg

Year of construction: 2019, condition: used, Mounting system: Hook lift system according to DIN 30722 Part 1 Rear side: Single-leaf door, liquid-tight with rubber seal Cover: Fixed steel roof with rainwater drainage Iodpfjxzpv Uox Affsik

Condition: excellent (used), Year of construction: 2023, S3Y310 BAND FILTER SYSTEM INCLUDING CHIP CONVEYOR BMF-BÜRENER - Coolant tank: 600 litres Isdpfjxv Dbhjx Affoik - Dimensions (LxWxH): 1100x1100x800 mm - Filtration capacity: 150 l/min with emulsion - Average outlet fineness: approx. 60-40 µm - 2x screw spindle pumps MTS20-40 Delivery pressure: 25 bar Flow rate: approx. 24 l/min Power: 3 kW - 2x submersible pumps SPK2-23/15 (rinsing) Delivery pressure: 4.3 bar Flow rate: approx. 35 l/min Power: 0.75 kW - 1 roll of filter paper - 1 unit hinged belt chip conveyor with pre-filtration, lifting tank and lifting pump (Flow rate approx. 170 l/min) - Coating: Graphite grey RAL7024 Year of manufacture: 2023

Condition: good (used), Year of construction: 1990, Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 75 kW -Speed: 1480 rpm -Volume flow rate: approx. 40000 m³/h -Total pressure: approx. 1600 Pa Iijdpfsb A H E Tox Affjk -Inlet connection: Ø 710 mm -Outlet connection: Ø 710 mm -Dimensions: 2400/1560/H2810 mm -Weight: approx. 1600 kg

Condition: new, functionality: fully functional, Year of construction: 2025, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. Iedpfx Aox Agpzjffoik A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: good (used), Chip extraction, filter extraction, bagging filter Iiodjb A E Uhepfx Affek -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg

Condition: used, Year of construction: 2025, A device for extracting aluminum chips and shavings (not aluminum dust), steel from machines and cleaning the workplace. The use of a side turbine makes the device ideal for connecting to machines where a large amount of chips is produced. It is equipped with a dust filter and a container (drawer) for pouring out the by-product. Machine characteristics Quick and easy filter replacement Large container for chips and shavings Quick access to the collection container Stably standing, compact housing Large container capacity Effective extraction Technical data ENGINE Iodpfxoxzrzaj Affoik 0.75 kW VOLTAGE 400 V / 50 Hz SUCTION CONNECTIONS 1 x 100 mm EXTRACTION CAPACITY WITHOUT BAG 1800 m³/h EXTRACTION CAPACITY WITH BAG 1520 m³/h ROTOR DIAMETER 350 mm DIMENSIONS 870 x 560 x 1170 mm WEIGHT 31 kg WARNING!! This machine is a return item. Mechanical damage to the casing, broken electrical box.

Condition: good (used), Hood, John Deere -Type: 318 -With: lettering Iodjb A St Ajpfx Affeik -Dimensions: 920/380/H180 mm -Weight: 2 kg