Used Chip Bucket for sale (5,930)

Condition: used, Tipping container, tipping skip for forklift trucks Chip container – bulk tipping skip – folding container Load capacity: approx. 1000 kg Volume: 1 m³ Entry brackets: 230 x 110 mm Fork spacing inside: 160 mm Fork spacing outside: max. 600 mm - Fork entry pockets – entry brackets for transport and emptying by forklift or pedestrian pallet truck - Manual tipping mechanism via hand lever - 4 heavy-duty plastic fixed castors Ø 175 mm, 2 of which are swivel castors - Foldable tow bar Dead weight: 220 kg Length: 1700 mm Width: 1060 mm Height: 1500 mm Kjdpehly Ifjfx Abfedn Very good condition Suitable for collecting, storing and transferring recyclable materials

Condition: like new (used), functionality: fully functional, Are you looking for a good unused like new Chip/swarf conveyor? We have 3 units units of different sizes available for sale. Please contact us for more information and sizes required. Each unit is a bargain at only €1,200 each Kdjdpfsy Ifm Ejx Abfen

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged. Kjdpfxoyxz Rhs Abfodn

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. Kdjdpeq Nf S Rsfx Abfsn 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Condition: good (used), Lid folding machine, folding machine, folding machine, lid folding machine, can folding machine, can folding machine Kdedpob A H R Eefx Abfsn -Lid seaming machine for sheet metal buckets -The machine creates the fold for the lid -Dimensions: 1000/1200/H1150 mm -Weight: approx. 800 kg

Condition: used, functionality: fully functional, Year of construction: 2000, overall weight: 350 kg, total height: 1,020 mm, total length: 1,900 mm, total width: 1,200 mm, load capacity: 750 kg, shovel Producing company WIFO-ANEMA BV Type Stapler Anbauschaufel Hydraulisch Ho 750 Year built 2000 Height (mm) 1,020 Length (mm) 1,900 Kdsdpjzd Hu Tefx Abfsn Lifting weight (kg) 750 Weight (kg) 350 Width (mm) 1,200

Condition: new, Spoon set consisting of: 1 ditch cleaning spoon, hydraulic, 140 cm wide, heavy-duty version for excavators up to 6 tons. Kdedozfwp Rjpfx Abfon 1 deep digging spoon, 30 cm, incl. removable teeth, for excavators up to 6 tons. 1 deep digging spoon, 60 cm, incl. removable teeth, for excavators up to 6 tons.

Condition: good (used), Chip bins, tipping containers, and box wagons in various sizes and designs. Available with or without wheels, with or without lids. Kdjdey Envdjpfx Abfsn

Condition: used, Chip container, tilting container with lid. Kdedpfx Absy Hf I Tofsn

Condition: used, Year of construction: 2012, Concrete mixer bucket, Bauer BK 200, manufactured in 2012, with a capacity of 2 cubic meters, and a load capacity of 2000 kg. Ksdpszda A Sefx Abfsdn

Condition: good (used), Year of construction: 2011, Schaffer - 2436 - shovel - wheel loader - 2011 - bucket - pallet fork Very well-maintained machine, free from defects. We have a continuous supply; please see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Kodpfxezd Ew He Abfedn Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Technical specifications: Filter bag diameter: 1 x 1000 mm Collection bag diameter: 1 x 1000 mm Extraction nozzle: 200 mm Power supply: 400 V Motor speed: 2900 rpm Motor power: 3 kW Overall dimensions: Length: 1700 mm Width: 1100 mm Height: 2400 mm Kdodpfjzd Ef Dex Abfjn

Condition: used, Chip dust suction filter, with automatic filter cleaning (wash control with blowers and Macair panel) at 1 bag. Kdodpfxotxdpxo Abfen Motor-powered lathe, optional Euro 500 + VAT Suction motor power:: Kw. 4 Filtration size: Main tube mouth mm. 250, deviations mm. 150 each

Condition: good (used), Year of construction: 2008, functionality: fully functional, heating capacity: 50 kW (67.98 HP), Wood chip heating plant with 50 kW heating output, already dismantled. Complete with boiler and chip storage unit, but without chip discharge system. Kjdpfx Absv Ngq Asfedn

Year of construction: 2019, condition: excellent (used), Autopack Bucket elevator conveyor 2019, Stainless, elevates from 500mm and discharges at 2300mm, overall length 3200mm, 3Ph Kedpfx Abjzcg E Defodn

Condition: like new (used), functionality: fully functional, machine/vehicle number: CS1, GEWA Chio vacuum CS1. The new price was €1,750. Kodpfx Asxiv Erjbfedn

Condition: used, Year of construction: 2015, operating hours: 9,583 h, 2015 | Caterpillar 314E LCR with 1 excavator bucket | Used Tracked Excavator | 9583 hours 📍Location: Switzerland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 48800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Kdodpfx Abjyyp Taofjn 68 inspection points 56 approved ✅ 11 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: TILT BUCKET IS NOT INCLUDED. Good operating excavator, drivetrain a bit noisy, installed Cat product link system, camera and Oilquick quick coupler, 1 bucket , hydraulic oil level a bit low, good engine performance , autolube leaks a bit from hose, small play on swing drive as well as pins of the boom and the blade cylinders 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40585 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2013, operating hours: 10,349 h, 2013 | Volvo EC220DL with 1 excavator bucket | Used Tracked Excavator | 10349 hours 📍Location: Switzerland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 44900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Kdsdpfsyyww Hsx Abfjn 👷‍♂️ Inspected by an independent expert 68 inspection points 65 approved ✅ 2 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: TILT BUCKET IS NOT INCLUDED. Good operating excavator for its hours, a little bit water is in the transfer case of the swing motor (water went trough the dipstick cover) but there is no major issue with this. There is a little difference in travel speed between the two drive motors in fast travel mode (left driver motor is a little slower). Generally a nice machine! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40584 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Chip Conveyor, Screw Conveyor, Double Screw Conveyor, Used Machine Manufacturer: Ventilatorenfabrik Oelde GmbH Overall dimensions: Width: 9460 mm Ksdpfx Abjy H I Uiofodn Depth: 1340 mm Height: 2300 mm Trough dimensions: 8830 × 900 × 340 mm Feed opening: 1230 × 1200 mm Discharge opening: 730 × 535 mm Electrical data: 400 V Double screw conveyor system.

Condition: new, Year of construction: 2024, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals Ksdjd Dy S Rjpfx Abfjdn L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.22KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Condition: new, Year of construction: 2026, The CORMAK extraction units of the DCV series have been developed for the filtration of primarily very fine-grained dust. It is designed to clean itself in an automatic cycle without any effort on your part. Our technology department has placed great emphasis on creating a motorised shaking system in which the entire filter cleaning cycle takes place automatically in a closed system. Strengths of the DCV dust extraction units Robust solid construction for quiet and vibration-free operation of the dust extractor Very high tightness of the entire extraction system, guaranteeing best air quality inside the plant and no heat loss during the heating period Powerful and quiet radial fan for high vacuum performance Possibility to build a ceiling system and feed several machines working simultaneously with the DCV extraction units Trouble-free automatic filter shaking system Mobile chassis to facilitate trouble-free movement of the extraction units throughout the plant Waste containers designed to maintain 99.99% containment and equipped with a mobile trolley system Control cabinet with the possibility of precise tracking of filter contamination status or activation / deactivation of the unit The polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles a filter such as HEPA must be used It is forbidden to use this extraction in explosive atmospheres. The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet raw material e.g. wet sawdust) Before activating the extraction, the lower beam has to be dismantled in order to have free access to the chip container Technical specifications CONTINUOUS DUTY MOTOR POWER S1 3.0 kW RPM 3000 rpm EXTRACTION CAPACITY 4500 m3 DIAMETER OF THE SUCTION NOZZLE 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 6 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 18 DIMENSIONS Kdsdpfxjuc Unqe Abfon 752 x 1502 x 2200 mm WEIGHT 200 kg

Condition: used, Chips center PROMATEC Kdjdpfx Asuhb Hkebfon

Year of construction: 2021, condition: reconditioned (used), Aluminum angled conveyor belt for shredder 2000mm flat + 2000mm incline Dim: approx. 3000 x 420 x 105mm Aluminum construction: Conveyor belt width with corrugated edge PVC- conveyor belt conveyor belt green, 2-ply especially crosswise stable endless welded with step connection * antistatic due to threads in the fabric of the running side Kdjdeff Hgbspfx Abfsn drive: motor approx. 0,55Kw, speed 0,3m/sec. * controllable with frequency converter connection 220/400V, 50Hz protection class IP54 drive, motor control optional

Year of construction: 2019, condition: new, Aluminum flat conveyor belt without substructure 3000mm flat Dim: approx. 3000 x 500 x 105mm Aluminum construction: Conveyor belt width incl. corrugated edge 500mm conveyor belt green, 2-ply especially crosswise stable endless welded with step connection Ksdoff Hf Dspfx Abfjdn * antistatic due to threads in the fabric of the running side drive: motor approx. 0,25Kw, speed 0,3m/sec. * controllable with frequency converter connection 220/400V, 50Hz protection class IP54 drive, motor control optional

Year of construction: 2019, condition: refurbished (used), Overband plate magnet Kdedpfed Dzahsx Abfsn Version in VA 1.4301 tightly welded 420 x 250 x 100mm completely welded housing Ring eyelets for suspension