Used Tools Grinding for sale (37,783)

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Ppedpfoyxy S Rsx Amkjt Motor power: 0.25 kW Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition

Condition: good (used), Dividing head, spiral milling attachment, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder -Manufacturer: Stankoimport, dividing head/tool holder for tool grinding machine -Type: 36642.M1 -Dividing head: rotatable/tiltable -Receiver/Dimensions: MK5 see photos -Dimensions: 300/270/H180 mm Pjdpfoxfhchjx Amkjpt -Weight: 21.6 kg

Condition: used, Technical details: grinding spindle - swivable: ja ° spindle revolutions per minute : 2850 U/min work table:: 50 x 134 x 44 mm table movement: X= 265 mm table movement: Y= 165 mm dimensions of grinding wheel: Bohrung Ø 20 mm voltage: 380 V / Hz machine weight approx.: 113 kg dimension machine xH: 0,63 x 0,56 x 0,64 m Grinding machine for twist drill cutting angle 30° / 40° Pjdpfx Asu Ng N Ajmkjpt Hole of the grinding disc Ø 20mm Adjustment path Z = 230mm manual Headstock can be swivelled 360° via radial scale Table with clamping support LxW: 270 x 100mm for clearance angle 40° and 90°, 3x clamping devices, prism 14mm, as well as test device with 12mm prism and magnifying glass 90mm adjustable Column rotatable 360° Grinding protection 2x 220V sockets *

Condition: used, Technical details: workpiece length: 600 mm pivoting angle: 100 Grad tilting and declining: re/li:30° Grad grinding wheel dia. (used wheel): 175x35 mm total power requirement: ca. 1,5 kW weight of the machine ca.: ca. 250 kg dimensions L x W x H: L.0;85xB:0;7xB:1;6 m Carbid Metal Tool Grinding Machine (chisel grinding machine) version double grinding disc machine grinding disc = diamond grinding disc with 175x35mm drill cutting edge via tilting lever Podeu Ng Hbjpfx Amkept *

Condition: good (used), Manufacturer: Doebeli Model: DPA 200 Condition: Used Ppedpfx Aexal Iksmket

Condition: used, turning speed range - grinding spindle 4500 U/min Ppjdpfowlvrgex Amkjt max diameter of the vice bore 17,5 mm max. radius to grind max. 10 mm max. lateral adjust. of milling cutter 10 max. longitudinal adjust. of milling cutter 40 max. angle for relief grinding 45 Grad weight of the machine ca. 125 kg Operating instructions available including collet set, grinding wheel flange wrench and the following special accessories: - Aluminium oxide grinding wheel - 3 diamond grinding wheels, different versions - 1 additional grinding wheel holder with diamond grinding wheel - Dressing diamond - Grinding dust cover

Condition: used, Year of construction: 1997, turning speeds 3.000 U/min grinding wheel diameter 150 mm table-size 380 x 220 mm T-slots 1x 0 3~220 / 380 V total power requirement 0,37 kW Ppedpfjup H D Esx Amkst weight of the machine ca. ca. 150 kg dimensions of the machine ca. 0,7 x 0,6 x 1,25 m Turning Tool Grinding Machine GREIF - DHL K-0

Condition: used, grinding wheel diameter 350 mm no. of working stations 2 Pjdpfxetqqmcs Amkept grinding wheel width max. 125 mm work piece support jeweils 470 x 260 mm dimensions l/w/h 1,32 x 0,78 x 1,3 m - work piece support can be swivelled -

Condition: used, Year of construction: 1978, clamping diameter max. 17,5 mm grinding spindle speed 4500 U/min relief angle max. 45 ° total power requirement 0,55 kW weight of the machine ca. 120 kg dimensions of machine L x W x H 0,54 x 0,47 x 1,31 m Pjdpfxetqqpyo Amkept

Condition: used, 1 universal tool grinding machine, model GD-6025Q with various accessories Psdpsy Thkqofx Amkspt Color: as shown in the pictures, refer to the images and inspection Condition: used

Condition: used, Steel Bench Grinder, Steel Grinding Machine ULRICH KLINGEL Type HSM 4 Year of manufacture: approx. 1976 with 4 workstations Grinding wheel diameter: 1x 100; 1x 150; 2x 200 mm Grinding wheel speed: approx. 1400/2800 rpm Pededz Srkopfx Amkept Motor power: approx. 1 kW Power supply: 380 Volt, 50 Hz - 3x oscillating grinding tables - all 3 workstations with swiveling tables, feed adjustment via handwheel - one workstation (the 4th) with a swiveling and tilting table, feed adjustment via handwheel - 1 diamond grinding wheel Ø 100 mm mounted (heavily worn) - 2 corundum grinding wheels Ø 200 mm mounted - Forward and reverse running at each station - Coolant system integrated in the machine base Required space (L x W x H): 1100 x 1000 x 1300 mm Weight: approx. 450 kg good condition

Condition: used, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Machine - defective - without control system Machine not operational - electrically non-functional - without CNC controller Ppjdpfxjd Rmcmj Amkjt Serial No.: Year of manufacture: 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Distance between centers 700 mm Center height 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Power supply 380 Volt, 50 Hz, 25 Amp. - CNC control system removed Required space L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control is missing. Mechanically in good condition, ideal for control retrofit Suitable as a spare parts donor or for rebuild with new control system

Condition: used, Surface grinding machine BLOHM type HFS 6 make no.: 10493 year of construction 1973 Electro magnetic clamping plate 600 x 300 mm grinding length 600 mm grinding width 400 mm table longitudinal movement max. 650 mm transversal movement 350 mm distance spindle center - table surface max. 600 mm distance spindle center - magnetic plate max. 517 mm Clamping surface table 1020 x 300 mm grinding wheel diameter 300 mm grinding wheel width 50 mm grinding wheel bore 76 mm table longitudinal feed 2-30 m/min infinitely variable table cross feed 2-65 mm stepless electric cross feed 3 m/min vertical feed 0,001 - 0,020 mm per infeed pulse vertical feed 0,250 m/min grinding wheel speed 1400 / 2800 rpm. Motor power hydraulic pump 2,2 kW Motor power grinding spindle 5 / 6 kW Mains connection 380 Volt, 50 Hz. Total power 11 kW - automatic depth adjustment - hydraulic longitudinal table movement - grinding wheel dresser on the headstock - electromagnetic plate height 83 mm - coolant system adjacent, with magnetic filter in filter housing - grinding spindle circulating lubrication Podjd Hbafepfx Amkspt - adjacent control cabinet (800 x 500 mm) - swiveling control panel - operating instructions and spare parts manual space requirement L x W x H 3000 x 2200 x 2100 mm weight surface grinding machine 3000 kg weight switch cabinet 200 kg good condition

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Grinding wheel speed 2840 rpm Mains connection 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0.18 kW) - For left and right cutting drilling tools thanks to interchangeable cams - Cam disks easily interchangeable for 2 or multi-bladed tools Pedpjnzt A Hjfx Amkspt - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed - Metal base with door and shelf - Wet grinding unit shown opposite - Operating instructions per PDF Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition

Year of construction: 1995, condition: ready for operation (used), Rated current: 22A, connected load: 15kVA, with extensive accessories, the machine is fully functional. An on-site inspection is possible. Ppodpfx Ajy Tx Sxomkot

Condition: ready for operation (used), Tool grinder, tool sharpener, drill sharpener, Schanbacher S3-50 Manufacturer: Schanbacher Type: S3-50 Year: 2012 Dimensions: 460 × 600 × 1260 mm Ppsdpfx Ajx Dbltjmkjt Drill diameter: 3–50 mm; Point angle: 90°–140° Includes: Protective cover, dust extraction system

Condition: used, GÜHRING Drill Bit Grinding Machine Type SS 15 Spiral Drill Bit Grinding Machine Serial No. 909 Year of manufacture: approx. 1977 Maximum drill diameter: 40 mm Grinding wheel diameter right: 300 mm Grinding wheel diameter left: 250 mm Grinding wheel width: 40 mm Grinding spindle speed: approx. 2800 rpm Motor power: approx. 2.2 kW Podpodzp Tbefx Amkjpt Electrical connection: 380 Volt, 50 Hz - Point angle steplessly adjustable - Point thinning device - Gear motor for vertical oscillation in front of cup wheel - Diamond dresser holder - Various drill holders - Coolant system Required space (L x W x H): 1200 x 950 x 1550 mm Weight: approx. 1150 kg

Year of construction: 2003, condition: excellent (used), Schneeberger DMR Gemini CNC tool grinding machine TECHNICAL DATA Control: GE Fanuc 160, 5 axes simultaneous Software: Schneeberger Quinto Measuring system X,Y and Z axis: 0.1 μm A-axis: 0.0001° C axis: 0.0001° Grinding head Power: 15 kW speed: 50 - 10`000 rpm spindle nose: HSK 50 Max. wheel diameter: 250 mm Max. Number of grinding wheels: 6 Linear axes X-axis, travel: 380 mm feed speed: 20`000 mm/min resolution: 0,0001 mm gear ratio: 1 : 1 Power: 1,0 kW / 3 Nm Y-axis, travel: 300 mm Ppodpfxjmqni Ae Amkjt feed speed: 5`000 mm/min resolution: 0,0001 mm Gear ratio: 24 :4 Power: 1,6 kW / 8 Nm Z-axis, travel: 280 mm feed speed: 20`000 mm/min resolution: 0,0001 mm gear ratio: 1 : 1 Power: 1,0 kW / 3 Nm Rotary axes C-axis: 210 ° Speed: 72 ° / s Resolution: 0,0001 ° Power: 1.6 kW / 8 Nm C` axis: +- 180 ° Speed: 90 ° / s Resolution: 0,0001 ° Infeed: Hydraulic A axis: +- 360 ° Speed: 225 ° / s resolution: 0,0001° Power: 1,0 kW Nose: ISO 50 Center height: 210 mm Dimensions and weight Length: 1700 mm Depth: 2270 mm Height: 2260 mm Weight: 8`000 kg We do not guarantee the accuracy, completeness and timeliness of the information.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10629 Manufacturer: MICHAEL DECKEL Type: S20 Turbo Year of construction: 2004 Type of control: CNC Storage location: Halberstadt Country of origin: Germany Workpiece Diameter: 250 mm Max. Grinding length: 340 mm Max. Workpiece Weight: 50 kg Grinding wheel diameter (max.): 150 mm Turning Speeds: 8000 RPM Workpiece holder: SK 50 Further information: The machine can be viewed while powered up. Psdpjy Ed Sbefx Amkjpt

Condition: used, Guideway and surface grinding machine WMW FRITZ HECKERT Aschersleben type SZ 1000 x 1250 x 3000 / 344 make no. 13.2236.2 year of construction 1989 nominal grinding area 3000 x 1250 mm table clamping area 3240 x 1000 mm grinding length max. 3300 mm Machining width 1250 mm Machining height 1250 mm grinding wheel diameter (surface grinding support) max. 600 mm grinding wheel width (flat grinding support) max. 100 mm grinding wheel diameter (swivel support) max. 450 mm Mains connection 400 Volt, 50 Hz - grinding support swiveling, drive power 16,5 kW, infinitely variable speed - grinding support for surface grinding, drive power 15 kW, infinitely variable speed - new electrical control, based on SIEMENS S7 from year 2001 - new electric control cabinet beside, year of construction 2001 - infinitely variable grinding wheel speed at both grinding supports - swiveling wheelhead for guideway and profile grinding - swivel-mounted and height-adjustable control panel - coolant system adjacent - Hydraulic system adjacent Podpehv A A Dsfx Amkspt - oil circulation lubrication adjacent - Various grinding wheels and holders space requirement complete L x W x H 11900 x 7700 x 4600 mm weight 45 ton. very good condition

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: UWIA/1058/90, SAACKE Universal Tool Grinding Machine UW IA – Year of Manufacture 1990 MANUFACTURER & MODEL - Manufacturer: Gebr. SAACKE GmbH & Co. KG, Pforzheim (est. 1932) - Model: UW IA (Universal Tool Grinding Machine) - Serial Number: UWIA/1058/90 - Year of manufacture: 1990 - Electrical diagram no.: UWIA-0-161A CONDITION Ppjdoy Er Ahjpfx Amkjt Very good, well-maintained overall condition. Fully functional, tested and ready for operation. Shows normal signs of use. DIGITAL DISPLAY - Heidenhain VRZ 710 (2-axis position display) - Program 212 994 04, ID no. 229 328 01 - Made in West Germany GRINDING SPINDLE DRIVE DATA - Motor type KK 5 S (3~) - 0.37 kW, 2800 rpm - 220/380 V, 1.85/1.07 A - Spindle speeds: 2100 / 3000 / 4200 / 6000 rpm (4-step) WORKPIECE SPINDLE DRIVE DATA - Georgii-Kobold motor KDD 648 P1/FW (3~) - 0.70 / 0.85 kW, 1400 / 2800 rpm - 380 V, 1.8 / 2.2 A, IP 54, tropical insulation - Made in West Germany ELECTRICAL DATA (GENERAL) - Operating voltage: 380 V (3-phase, 50 Hz) - Control voltage via transformer: 220 V - Lighting voltage: 220 V - Rated power: 1.3 kW - Rated current of the machine: 2.8 A - Circuit protection rated current: 10 A EQUIPMENT & FEATURES - Swiveling worktable ±90° - Tailstock - Workpiece spindle with separate drive - Grinding spindle head with 4 speeds - Heidenhain VRZ 710 digital display (2 axes) - Tool cabinet including approx. 15 CBN grinding wheels - Machine is mobile on 4 castors APPLICATION Classic universal tool grinding machine for grinding turning and milling tools, drills, reamers, profile tools, as well as round and flat profiles. Ideal for grinding shops, tool making, and maintenance. LOCATION & TRANSPORT Location: Central warehouse, Köck Auction House, 6178 Unterperfuss, Austria. Collection in person or freight shipping by arrangement. Transport costs on request (depending on delivery address). All information without guarantee. Subject to errors and misprints.

Condition: good (used), - Tool cabinet with accessories. - Equipped with coolant pump and dust extraction. Ppodpfx Amoyzf Hrekot Table length: 476 mm Table width: 112 mm Longitudinal travel: 180 mm Cross travel: 150 mm Table swivels ±30° Vertical travel of grinding wheel: 200 mm Distance table – grinding wheel axis: max. 250 mm, min. 50 mm Ø between centres max. 155 mm Ø without tailstock max. 215 mm Motor with 2 speeds: 1500/3000 rpm Grinding spindle speeds: 3700/7400 or 5000/10000 rpm.

Year of construction: 1989, condition: ready for operation (used), Center height: 150mm, center distance: 800mm, max. grinding length: 400mm, table dimensions X/Y: 1245mm/200mm, grinding spindle diameter: 80mm, grinding spindle length: 400mm, workpiece carrier: ISO50, spindle speed: 8000rpm. Documentation available. An on-site inspection is possible. Pjdpfx Amsy D Tp Tokspt

Condition: new, Year of construction: 2026, functionality: fully functional, Suitable for cleaning coolant oil used in carbide grinding. Our solution with an ultra-fine filtration system for grinding oil optimizes your tool production at the highest level. Podpfx Amjy Anqiekopt In today’s demanding manufacturing environment, the quality of your products is critical. Our MANTA ultra-fine filtration systems clean your grinding oil at a microscopic level to maximize the performance and service life of your precision tools. Available in a wide range of configurations.

Condition: used, DECKEL S11 universal tool & cutter grinder under power in our warehouse Pjdpfsphvlasx Amkopt Mimu machine-tools (Italy)