Used Chimney for sale (131)

Year of construction: 2018, condition: ready for operation (used), A complete Heat and Control line for frying extruded snacks is available. Components: Product feeding system, vibration system for product feeding and particle removal, deep fryer, filter for removing burnt particles, oil heating system with burner, oil tank, oil return system, chimney, control cabinet. Frying capacity: 500kg/h, total system length: approx. 10000mm, total system height: approx. 3500mm. Including spare parts. Documentation available. On-site inspection is possible. Expected to be available from August 2025. Lhedpfewdwy Nex Affor

Year of construction: 2011, condition: like new (used), Please notice that the entire factory with land and buildings is for sale! List of devices for the pellet production line No. 1 (with a drying line) No. Device name set. Description DRYER LINE: - bale feeder - length 9m - Rotogrin RSC B 36-132 shredder - chain scraper of wet raw material - length 12m - V500 wet raw material screw conveyor - 4 kW - drying cyclone with a rotary dispenser - 4 kW - dryer exhaust fan - 55 kW Lhjdpeim I Ruofx Affjr - a stove with an emergency chimney - 2.2 kW - SBP-2500 dryer drum - 5.5 kW - fuel dosing system with a container + burner - 5.9 kW - ignition detection system - extinguishing system - electrical installation, sensor system, wiring - control cabinet and automation Passat straw chopper 3 x 15 kW Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan 4 bar Buffer tank with feeders Conditioner ANDRITZ CM 1101 11 kW, 750 rpm Granulator PM 30 ANDRITZ 315 kW, 1500 rpm Automatic Roller Lubrication System Pellet cooler MOGENSEN G 1014 Screener A set of transport routes for the production line (pneumatic feeders, scraper and bucket conveyors MINIMAX spark detection system with control unit Control panel with software Power and control cabinets, wiring List of devices for the pellet production line No. 2 No. Device name set. Description Bale feeder - Length 9 m Rotogrin RSC B 36-132 chopper Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan - 4 bar ANDRITZ CM 1101 conditioner 11 kW, 750 rpm Granulator PM 30 ANDRITZ + lubrication system - 315 kW, 1500 rpm Pneumatic feeders from the hammer mill to the filter Power and control cabinets, wiring

Condition: used, - Flat bottom tank with 2% slope - Brand : ALFA LAVAL - Total capacity : 30200 liters - Material : 316 L stainless steel Lhodpfx Afow Ngqtofor - Interior finish : Cold rolled - Exterior finish : Cold rolled - Temperature controlled ROOF - Conical - 1 off-center chimney at the front Ø 200 mm - 2 stainless steel flags - 1 thermometer - 6 lifting rings RING - 1 oval door 310×420 mm - 1 partial drain valve DN 65 - 1 connection for level sensor BOTTOM - 2% sloped plate with drain - 1 total drain valve with plug DIMENSIONS - Diameter : 2800 mm - Total height : 6000 mm - Ferrule height : 4800 mm - Conical upper dome : 500 mm - Chimney : 300 mm

Year of construction: 2010, condition: good (used), functionality: fully functional, machine/vehicle number: -, Wet Scrubber (fume abatement) with floating balls complete with pump and centrifugal fan , two booster tanks , chimney with sampling scale . Flow rate about 40,000 m3/hour . Lhodpfxouihz De Affsr

Condition: new, functionality: fully functional, tank capacity: 21,100 l, total height: 5,760 mm, inner diameter: 2,507 mm, overall weight: 1,130 kg, TECHNICAL SPECIFICATIONS - 304L stainless steel tank - Storage tank - Vertical cylindrical tank on legs - Off-centre conical dome - Conical bottom with 38% slope - Interior and exterior finish: 2B polished - Off-centre chimney, diameter 400 mm and height 300 mm - ELICA 316L stainless steel anti-retention top hatch - ELICA 308x440 mm oval autoclave door, opening at the bottom of the ferrule - 3 DIN 80 male simple connections on the dome - ELICA 1000 HL 316L stainless steel double-acting valve, horn mounting - 5 lifting rings, including 1 at the base of the tank - Support + manufacturer's plate - 1 DIN 65 male connector in ferrule - 1 DIN 65 male connector in ferrule - Earth connection - Total drain pipe + DIN 65 male connector at the end of the pipe - 4 external tank feet, height 800 mm - Flat stainless steel reinforcement belt 150x5 - 4 levelling jacks - 4 stainless steel 304L floor plates - Weight: 928 kg Ljdpfx Aswvuv Ssffehr DIMENSIONS - Diameter: 2507 mm - Height: 5760 mm - Weight: 1130 kg

Condition: good (used), clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box, measuring chimney -Clamping table: with T-slots -Groove width: 20 mm, groove spacing 69 mm -Guide rail: with rack -Dimensions: see photos / technical drawing Ledpfx Afsvmm Aasfohr -Dimensions: 3300/285/H185 mm -Weight: 397 kg

Condition: ready for operation (used), Year of construction: 1997, A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible. Ledpfxowydgzj Affshr

Condition: used, Year of construction: 2017, Overview The brewhouse was manufactured in 2017 by the Czech company HANSTEEL s.r.o.. With it, 5 hl can be produced. Technical details Two-chamber brewhouse with electric heating system. Nominal volume: 500l Total volume: 550l Brewhouse is mounted on separate frame with stainless steel stairs and platform Incl. cooler from Alfa-Laval: cooling of 500l in 1h from 99°C to 12°C Butterfly valves on the chimneys Agitators in both vessels with frequency converter to change the speed Strainer bucket with level sensor for automatic water refilling control of the brewhouse via a touch screen display accessible from the working platform the app needed to control the brewhouse can be installed on a portable device (e.g. tablet) and the operation of the brewhouse can be controlled remotely There is also a possibility to offer for sale open fermenting vats with a nominal volume of 1000 l (total volume 1200 l). Ljdpfx Ajuzpiieffehr

Condition: good (used), 100.000L steel tank. Fire / drinking water underground or above-ground Dimensions 16.9 x 3.10m wall thickness: 5mm weight 8mm approx. 12t, weight 5mm approx. 9t. The tanks are sandblasted by us, equipped and then painted internally and externally with a corrosion-resistant epoxy resin coating. As standard, the tank has a suction pipe with a suction basket, a breathing chimney, a supply and drain connector, a ladder and a hatch. For an additional fee, we install a float valve and a manhole chimney We can weld additional accessories, e.g. a platform. Lsdpfxedbllzj Affshr We have tanks with and without beds. Steel beds for PLN 1800€ net. The tanks have a tightness certificate and a declaration of conformity. We offer delivery to the customer.

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood Lhodpfxsv Si Szo Affer The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, functionality: fully functional, total height: 6,520 mm, overall weight: 1,300 kg, tank capacity: 32,000 l, inner diameter: 2,900 mm, TECHNICAL SPECIFICATIONS Lhodpfx Afswvt Efofor - Effective capacity: 31,900 L - Shell, bottom and dome: 316L stainless steel - Vertical cylindrical on legs - Off-centre conical dome - Conical bottom with 38% slope - Upper bottom slope: 21.26% - Interior and exterior finish: 2B polished - Shell thickness: 2 mm - Off-centre chimney: Ø 400 mm and height 300 mm - Upper stainless steel anti-retention hatch: 316L ELICA - 3 simple male DIN 80 connections on the dome - ELICA 308 x 440 mm oval autoclave door, opening at the bottom of the shell - ELICA 1000 HL double-acting valve, 316L stainless steel, horn mounting - 5 lifting rings, including 1 at the bottom of the tank - Support + manufacturer's plate - 1 oval autoclave door, 330 x 430 - 1 DIN 50 single male ferrule connection - 1 DIN 80 single male ferrule connection - Earth connection - Total drain pipe + DIN 50 male connection at end of pipe - 4 external tank feet, height 1000 mm - 1 flat stainless steel reinforcement belt 150 x 5 - 4 levelling jacks - 4 304L stainless steel floor plates DIMENSIONS and WEIGHT - Diameter: 2900 mm - Total height: 6520 mm - Weight: 1300 kg

Condition: used, Clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box, measuring chimney -Surface: scraped -Material: cast -Dimensions measuring chimney: 450 x 450 x 3005 mm Lhjdpfx Afjdf U Sysfsr -Wall thickness: 30/80 mm -Holes: Ø 52 mm -Dimensions base plate: 1080 x 1080 mm -Transport dimensions box one: 3310/645/H770 mm -Transport dimensions box two: 1160/1080/H350 mm -Weight: 1190 kg

Year of construction: 2008, condition: ready for operation (used), A heat treatment facility (2-chamber bogie hearth furnace) consisting of two furnaces is available. 1) Chamber furnace Bättenhausen Wärmetechnik GmbH, year of construction: 1991. 2) Chamber furnace LIO Poland, year of construction: 2008. Chamber dimensions X/Y/Z: 2x900mm/4300mm/1100mm, fuel: natural gas, temperature range: 350°C-1100°C, burners: 2x18, max. product dimensions X/Y/Z: 8800mm/3100mm/250mm, max. product weight: 18t. Process: Normalizing, tempering, soft annealing, austenitizing, hardening. Including a chimney, height: 38m. The plant is partly scrapped. Documentation available. On-site inspection is possible. Lhodpfx Ajwmdvvoffjr

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: AS4002/10, This kiln is manufactured by the Italian company SITI and is suitable for firing sanitary ceramics. The guaranteed firing temperature is 1220-1230 degrees Celsius. It can also be used for corrective firing of sanitary ceramics. The kiln comes with 10 complete cars equipped with heat-resistant accessories. Additionally, it includes a manual shuttle for kiln cars and a hydraulic lifting table for loading pieces. Furthermore, there are 4 stainless steel exhaust chimneys included. The furnace was in operation for 3 years and was professionally dismantled in 2021. It is currently stored in Ludinovo, Kaluga Region, Russia. Lhodpfxju S E Umj Affor

Condition: new, Year of construction: 2025, Heat output / nominal heat output: 16.5 kW For rooms up to approx. 300 to 400 m³ (according to DIN 4108) Flue pipe outlet: rear side (standard) Flue pipe: Ø 180 mm Filling chamber volume: 80 ltr Required chimney draught min. 12 Pa Dimensions of the filling opening (L x W) 300 x 340 mm Weight: 370 kg Efficiency 85,88 Energy efficiency class: A+ The EWI-A 15 space heaters are type-tested according to DIN EN 13240, according to 15a B-VG (Austria) and LRV (Switzerland). They comply with the 1st BImSchV (Federal Immission Control Ordinance) stage 2. Lsdpfedlmn Hox Affohr

Condition: used, Year of construction: 2006, functionality: fully functional, Steam boiler with ash collector, chimney, pellet bunker and PLC controller. 523kW 800kg/h 12,3bar 193deg Lhsdpjwi Nrhefx Affer 720l

Condition: ready for operation (used), Technical characteristics Max power 175 kW Air flow rate 8900 m3/h Thermal fan 2,2 kW, smoke fan 0,55 kW Chimney diameter 200 mm 3 hot air outlets diameter 250 mm Combustion chamber dimensions : 950 x 600 x 680 mm Ideal for heating workshops of 600 to 800 m2 (about 3000 m3) Power and Motors Voltage: 400 V Ledpfx Aotv Th Eeffshr Pluging: Three-phased Power: 3 Kw Overall dimensions Lenght: 1700 mm Width: 930 mm Height: 1970 mm Weight: 615 Kg

Year of construction: 2023, condition: new, 1.) Applications: Production of concrete blocks for: masonry, foundation, pillars, floor, belt, chimneys; gutters and gutter covers; 2.) Advantages: Lhodpoiwxrgefx Affsr - High productivity - the active surface of the mold 1200 x 800mm (12 masonry blocks 400x200x200mm) - Hydraulic actuation - Teflon bushing of the sliding bearings on the guide columns - Reliable mechanical and hydraulic systems. - Operator seat - Concrete hopper – 700 liters - Drawer for concrete supply to the mold – hydraulically operated - 2 vibrators on the punch plate - 4 electric motovibrators - mold vibration - Automatic stop of vibration when unpacking - Polyurethane coated wheels + Hydraulically actuated wheel to change the direction of travel - Large variety of molds - Allows the installation of molds with a height of 370mm - can produce roadable ditches and open ditches 3.) Technical characteristics: - Maximum mold dimensions: 1200x800mm - Maximum finished product height: 370mm - Duration of a cycle: 60 seconds - Hopper capacity: 700 liters - Installed power: 15 kW - Supply voltage: 380V - Overall dimensions: 3.30 x 2.30 x 4.00m - Mass of the machine (with mold): 4000 kg - Vibration frequency: 3000rpm - Required amount of semi-dry concrete: 8 m3/hour - Recommended mixer: SAB6MC automated concrete station

Year of construction: 2014, condition: excellent (used), Complete lumber drying and steaming line, year of manufacture 2014, second hand - 2 Baschild TDK drying chambers, each with a capacity of 100 m³/cycle, and 1 Baschild DVKI steaming chamber with a capacity of 30 m³/cycle - Thermal energy is supplied via superheated water at 130°C - Chambers are insulated with included mineral wool - Connections required: heating fluid/hot water at the external chamber flanges, cold water for humidification at threaded external pipes, cold water for wet bulb sensor at the technical room to be built next to the installation, 400V electricity for each electrical panel and 230V for the panel server, as well as LAN connection to the panel server Ljdpfxjw Ewlbs Affehr Characteristics of the TDK drying chambers (2 units) - Net drying dimensions: width 9000 mm, net depth 8700 mm, net height 4100 mm - Loading is performed by forklift - Ventilation system: 6 fans per chamber, each with Danfoss FC102 inverters - Control system: Baschild ZOOM Server configuration DVKI steaming chamber characteristics (1 unit) - Net capacity 30 m³/batch - Sliding door - Baschild ZOOM thermostat - Oxyvent overpressure system - Heavy-duty supporting structure Included accessories: stainless steel basins and radiators on 3 sides Thermal agent production options (optional) - Superheated water boiler, 1 Gkcal/h, automatically fed with wood waste, year of manufacture 2014, brand SCEAT Italy, with flue gas exhaust system consisting of fan, multi-cyclone, fittings, and chimney - Silo with 2 scrapers with hydraulic pistons and hydraulic control unit for boiler feeding, dimensions 6000×4000 mm, year of manufacture 2014

Condition: new, Year of construction: 2025, Heat output / nominal heat output: 17.8 kW For rooms up to approx. 300 - 400 m³ (according to DIN 4108) Filling volume: 78 ltr Mass of the filling opening: Ø 215 mm Flue outlet: rear side (standard) Flue pipe Ø 180 mm Required chimney draught min. 13 Pa Weight: 250 kg Efficiency: 79,02 Energy efficiency class: A The room heaters GRA-N are type-tested according to DIN EN 13240, according to 15a B-VG (Austria) and LRV (Switzerland). They comply with the 1st BImSchV (Federal Immission Control Ordinance) stage 2. Ljdjdlmnnjpfx Affshr

Condition: new, Applications: Production of concrete blocks for wall, foundation, pillars, roofs, chimneys. Ljdpfxeiwut Te Affohr Production of concrete pieces for water drainage Advantages: optimal distance between the mould and the over-mould ensures a comfortable position for the operator - Handling the steering wheel requires minimal effort thanks to a gear force reducer; - Simple operation and maintenance professional vibrator with low power consumption Automated stopping of the vibration once demolding occurs Wide variety of molds - there is the possibility of installing moulds for high concrete elements (maximum 370mm)* Technical specifications: Maximum mold dimensions: 800x500mm Maximum height of end product: 370mm Cycle duration: 60 seconds Supply power: 0.28kW Supply voltage: 220V Overall dimensions: 1.35x 1.55 x 1.7 m Machine weight (including a mold): 400 kg Vibrator rotation speed: 3000rpm Concrete consumption: 2 m3/hour Recommended concrete mixer: MX300L

Condition: new, Year of construction: 2025, Heating capacity / nominal heat output: 21 kW For rooms up to approx. 300 to 500 m³ (according to DIN 4108) Flue pipe outlet: rear side (standard) Flue pipe: Ø 180 mm Filling volume: 80 ltr Required chimney draft min. 12 Pa Lhedpfxohvibzj Affer Mass of the filling opening (L x W) 300 x 340 mm Weight: 375 kg Efficiency 88,2 Energy efficiency class: A+ EWI-A 15G space heaters are type-tested according to DIN EN 13240, according to 15a B-VG (Austria) and LRV (Switzerland). They comply with the limit values of the 1st BImSchV. (Federal Immission Control Ordinance)

Year of construction: 2024, condition: new, ~ SPEED 700 , SEMI AUTOMATED ~ APPLICATIONS Production of: - paving - kurbs - concrete blocks for: -masonry -foundation blocks -posts, floor slabs -chimneys, -gutters -roadway gutter covers. ADVANTEGES : - Vigorous vibration coupled with hydraulic pressing of the concrete guarantees high quality concrete products. - Vibrators mounted on the counter mold play an important role in concrete compaction. - Chrome-plated pipe guide columns - Teflon-coated sliding bearings - Our wide range of molds can provide a diverse production. - Reliable mechanical and hydraulic systems. OPERATE : ~ Mostly manual: -Drawer(back/ fort -Mold (up/down) -Counter Mold (up/down) ~ Commands executed automatically: -start/ stop vibration when reaching height -start/ stop pallet feeding exhaust line stop) COMPONENTS: 1.) the press 2.) pallet stacking space Lodpfxshufyho Affshr 3.) pallet feeding line 4.) concrete bunker 5.) drawer (1) for concrete mold feeding 6.) pallet discharge line with fresh products 7.) hydraulic unit 8.) lever panel for the machine operator TEHNICAL FEATURES: - Pallet dimensions: 700x670x40mm - Active surface: 640x640mm - Minimum/maximum finished product height: 40mm/ 250mm - Vibration frequency: 3000rpm - Hydraulic pump flow: 40 l/min - Cycle time: 60 -100 sec (Semi-automatic version) - Cycle time: 30 – 50 sec (Fully automated version) - Installed power: 15.50 kW - Hydraulic power unit: 7.5 kW - Vibrating table vibrators: 6.00 kW + 0.28 kW - Counter mold vibrators: 0.80 kW - Discharge line: 0.55 kW - Supply voltage: 380V OVERALL DIMENSIONS: Width: 1.60m (without hydraulic unit and control panel) Length: 5.60m Height: 2.85m Machine mass (without mold): 4,000 kg Approx. mold mass: 250 - 300kg ADDITIONAL PRODUCTS / OPTIONAL: 1.) AUTOMATIC OPERATION : ( + 6.300 euro ) - PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation Reduces the time of a production cycle, higher productivity (30 -50sec) 2.) SECOND DRAWER (2) for finishing layer for paver and kurbs + BUNKER ( + 3.900 euro ) 3.) CONCRETE MINISTATION SEMIAUTOMATED ( + 18.800 euro) Component parts: a.) Sand bunker 2 m2 + Volumetric dosing with conveyor belt + Vibrator b.) Gravel bunker 2 m2 + Volumetric dosing with conveyor belt c.) Electric control panel d.) Concrete Mixer MX 300 ( Fluid concrete: 300 liters Semi-wet concrete: 200 liters, 2.4 cubic meters of semi-wet concrete/hour ) 4.) AUTOMATIC LIFT (elevator) ( + 4.000 euro) 5.) CONVEYOR 6M , for transporting the concrete to the machine bunker ( + 4.000 euro) - Band width: 500mm - 7mm smooth rubber mat with 3 inserts - Motor 1.5kW (380V) PLEASE FOR THE COMPLETE OFFER SEND US AN EMAIL.

Year of construction: 2023, condition: new, APPLICATIONS: - Paving manufacture - Curb manufacture - Concrete block manufacture for: - masonry - foundation - posts - floor slabs - chimneys - scafa gutters - roadway gutter covers ADVANTEGES: - Vibrators on tamper head. - Bunker and drawer for finishing layer of paving and kerbs. - High productivity - active area 1,10 x 0,6m - Automatic operation: PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation; Schneider Electric electrical command and control components - Our wide range of moulds can ensure a diversified production. - Reliable mechanical and hydraulic systems. COMPONENTS: - Press unit - Pallet space - Pallet feeding line - Hopper and drawer (1) for feeding the mould with concrete - Hopper and drawer (2) for making the finishing layer (paving, kerbs) - Pallet discharge line with freshly moulded products - Hydraulic unit - Electrical control panel with PLC. TECHNICAL FEATURES: - Pallet dimensions: 1240x750x45mm - Useful surface: 1100x630mm - Minimum/maximum finished product height: 40mm/ 250mm - Vibration frequency: 3000rpm - Cycle time: 35 - 60 seconds - Total Installed power: 30,00 kW MAIN DIMENSIONS : - Width: 2,10m (without hydraulic unit and control panel) Lsdpfx Afjht Uwpefshr - Length: 8,00m - Height: 3,10m - The hydraulic unit and control panel are placed at the side, at a distance of 1.00m from the chassis and occupy a surface area of 2m2. - Machine mass 6,000 kg

Condition: new, Motorised concrete block machine Production of concrete blocks for use in: masonry, foundation, pillars, floors and chimneys. Powerful hydraulic pressing Operator seat Concrete bunker – 500 liters Automated lift of the counter mold Mold maximum dimensions: 1200x400mm Maximum height of concrete product: 200mm Cycle duration: 45 seconds Installed power: 5.5kW Supply voltage: 380V Overall dimensions: 2.2 x 2.0 x 1.85m Mass (including mold): 2000kg Vibrator motor rotation frequency: 3000rpm Dry concrete consumption: 4 cubic meters/hour Ledshx N Nmspfx Affjhr