Used Atlantic Ats 3000 for sale (30)

Condition: used, Year of construction: 1998, sheet width 3050 mm plate thickness 6 mm rear stop 10 - 750 mm cutting angle 0,5 - 3 ° down holder 18 Stk no. of strokes 9 / 14 Hub/min total power requirement 7,5 kW dimensions of the machine ca. 3750 x 1600 x 2450 mm weight 4800 kg Ksdpfew S Nknox Ah Njll Features: - Electro-hydraulic, slide-guided sheet metal guillotine shears - Front control panel, front left - With electro-hydraulic cutting angle adjustment - With manual cutting gap adjustment, from the front (eccentric) - Electric motor rear stop 10-750 mm (ball screws) - With analog position display + hand wheel for fine adjustment - 1x side stop - 3x support arms - 1x freely movable foot switch - Front finger guard - Operating instructions (PDF)

Condition: used, Year of construction: 1987, sheet width 3050 mm Kodpfoxab Aqox Ah Noll plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm cutting angle 0.5 - 3.0 ° down holder 18 Stück no. of strokes 9 / 14 Hub/min back stop - adjustable max. 750 mm Control konv. engine output 10.0 kW weight 4800 kg range L-W-H 3750 x 1600 x 2450 mm maintained condition (!!) Furnishing: - electro-hydraulic / slide-guided sheet metal shears - front control panel, left - easy to use - with electro-hydraulic cutting angle adjustment - with manual cutting gap adjustment, from the rear - electro-motorized back gauge 10-750 mm - with analogue position display + handwheel for fine adjustment - 1x robust side stop - 1x freely movable foot switch - front finger/encroachment protection - 2x EMERGENCY stop buttons at the front - User manual (PDF)

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm Kljdsu Rni Hopfx Ah Njl no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 2,3 x B: 3,7 x H: 1,8 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Condition: good (used), Year of construction: 2003, machine/vehicle number: A 10371, Offer 25448 Technical Data: - Max. working width: 3050 mm - Max. cutting capacity (St 40): 0.5 – 6 mm - Cutting angle adjustable (motorized): 0.5 – 3° - Blade gap adjustment: manual - Number of hydraulic hold-downs: 18 pcs - Motorized backgauge with SP8 positioning control: 10 – 750 mm - Strokes per minute (depending on cutting angle and length): 9 – 17 strokes/min - Hydraulic drive: 400 V / 7.5 kW - Table height: 770 mm - Space requirement incl. backgauge, w/o front support arms: approx. W 3750 x H 1600 x D 2450 mm - Weight: approx. 4500 kg Includes: - Electric foot switch Kedpfxex I I Uxj Ah Nsll - Cutting line illumination - Angle gauge - 2 support arms - Rear area protection with side guard and light curtain

Condition: used, sheet thickness: 6motor: 10messurements (LxWxH): 3750 x 1600 x 2450sheet length: 3050weight approx.: 4800 Description: Hydraulic Shearing Machine ATLANTIC ATS 3000 Used Machine - Sheet width: 3050 mm - Sheet thickness: 6.0 mm - Sheet thickness for stainless steel: 4.0 mm Kedpfx Aeu Uwyyeh Nell - Cutting angle: 0.5 - 3.0° - Hold-downs: 18 pieces - Stroke rate: 9 / 14 strokes/min - Rear gauge - adjustable: max. 750 mm - Control: Conventional - Motor power: 10.0 kW - Weight: 4800 kg - Dimensions L-W-H: 3750 x 1600 x 2450 mm - Condition: Well-maintained Features: - Electro-hydraulic / cam-guided sheet metal shear - Front control panel, left side - easy to operate - With electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the rear - Electro-motorized rear gauge 10-750 mm - With analog position indicator + handwheel for fine adjustment - 1x robust side stop - 1x movable footswitch - Front finger/entry guard - 2x emergency stop buttons at the front

Condition: used, Year of construction: 1990, Hydraulic Guillotine Shear Manufactured by ATLANTIC, Type ATS 3012 Year of Manufacture: 1990 Technical Specifications Manufactured by ATLANTIC Type ATS 3012 Year of Manufacture: 1990 Sheet Size: 3000 x 12 mm Cutting Angle Adjustment: 0.5 – 3 degrees Number of Hold-Down Clamps: 18 Length of Angle Stop: 1000 mm Working Height: 900 mm Motor Power: 22.5 kW Dimensions: Approx. L 4.20 x W 2.00 x H 2.20 m Weight: Approx. 8 t Features • Angle Stop • Manual Cutting Gap Adjustment • Automatic Cutting Angle Adjustment • Motorized Backgauge with Fine Adjustment All information is subject to change without notice. Ksdpowif I Ejfx Ah Nell A demonstration is available at any time in our showroom.

Condition: good (used), functionality: fully functional, Year of construction: 1994, Sheet width: 3050 mm Sheet thickness: 10 mm Cutting angle: 0.5-3 ° Number of hold-downs: 18 units Strokes: 22/7 strokes/min Working height: 900 mm Total power requirement: 20 kW Machine weight approx.: 8,500 kg Space required approx.: 3800 x 2100 x 2100 mm Klodpfx Ahjx Sv Uuj Nsl

Condition: good (used), Stop for press brake, bending machine, guillotine shears... Klodpfx Ajxf Dmcsh Nol -Stop bar: from Atlantic ATS 3006 guillotine shear, without drive motor -Stop length: 2670 mm -Travel: 800 mm -Accessories: see photos -Transport dimensions: 2670/1050/H320 mm -Weight 186 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1987, control type: manual, degree of automation: manual, actuation type: hydraulic, working width: 3,050 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 9 1/min, stroke rate (max.): 17 1/min, sheet thickness steel (max.): 6 mm, back gauge adjustment: motor-driven, back gauge: 750 mm, power: 7.5 kW (10.20 HP), input voltage: 380 V, type of input current: three-phase, overall weight: 4,500 kg, total length: 322 mm, total width: 157 mm, total height: 158 mm, year of last overhaul: 2025, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, ❇️ Hydraulic Guillotine Shear ATLANTIC ATS 3006 – 3050 mm / up to 6 mm Steel – Excellent Condition – UVV Safety Inspected – Fully Functional For sale is an ATLANTIC ATS 3006 hydraulic guillotine shear in excellent, well-maintained condition. The machine is currently in use, is fully functional, and has a valid UVV (accident prevention regulation)/safety inspection (see photos). Viewing and technical function test can be arranged anytime by appointment. ⸻ ❇️ Technical Specifications: • Manufacturer: ATLANTIC • Model: ATS 3006 • Machine type: Hydraulic Guillotine Shear • Max. cutting length: approx. 3,050 mm • Max. cutting capacity: approx. 6 mm steel (400 N/mm²) • Cutting angle: adjustable (typically approx. 0.5° – 3°) • Blade clearance: manually adjustable • Backgauge: motorized (travel depending on configuration, typically up to approx. 750 mm) • Hydraulic hold-downs: multiple • Strokes per minute: approx. 9–17 (depending on material and angle) • Motor power: approx. 7.5 kW • Connection: 400 V • Machine weight: approx. 4,500 – 5,000 kg • Year of manufacture: 1987 All details without guarantee – onsite function test possible and expressly encouraged. ⸻ ❇️ Dimensions: • Approx. L 322 cm x H 158 cm x W 157 cm (or 218 cm with support arm for sheet cutting / wooden board) ⸻ ❇️ Condition • Excellent, well-maintained condition – fully operational • In continuous use in daily operations • Currently valid UVV/safety inspection • Hydraulics and mechanics clean • Ready for immediate use ⸻ ❇️ Sale & Processing • Invoice with VAT can be issued • Collection/transport by buyer (weight ~5 t) – delivery may be possible at buyer's expense • Location: 72229 Rohrdorf • Loading facilities (overhead crane) available on site ✅ Price • 9,500 Euros plus VAT Ksdpfx Ahox N Etho Noll ⚠️ I have additional workshop and metalworking accessories available in my other listings.

Condition: used, Year of construction: 1992, machine/vehicle number: A20533, Offer 25199 Technical data: - max. working width: 3050 mm - max. cutting capacity St 40: 12 mm - electrically adjustable cutting angle: 0.5 - 3° - manual blade gap adjustment - number of hydraulic hold-downs: 18 pcs - motorized back gauge: 10 - 1000 mm - front angle stop - number of strokes depending on cutting angle and length: 7 - 17 per minute - hydraulic drive: 400 V / 22.5 kW - table height: 770 mm Kljdpfxowtz Shj Ah Nsl - space requirement approx.: W 4100 x H 2030 x D 2030 mm - weight approx.: 8500 kg - with: - electric foot switch - cutting line illumination - rear safety device with light barrier

Condition: good (used), Year of construction: 1998, machine/vehicle number: 98095307, Offer 24271 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable mot. 0.5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-down devices 18 pcs. - mot. Rear fence with positioning control 10 - 1000 mm Klodpfx Ahot Tw Uie Nsl - Front angle fence - Stroke rate depending on cutting angle and cutting length 9 - 17 per/min - Pneumatic connection 6 bar - Hydraulic drive 400 V / 15 kW - Table height 770 mm - Space requirement incl. back gauge, - approx. W 4050 x H 1600 x D 2450 mm - Weight approx. 5500 kg - with: - E-foot switch - Cutting line lighting - Sheet support - Rear guard with protective grille

Condition: used, Year of construction: 1990, sheet width 3050 mm plate thickness 12 mm Kljdpfsu Uu Smex Ah Nsl distance between columns 3100 mm table height over floor 900 mm cutting angle adjustment 0,5 - 3 ° no. of strokes 6 - 13 Hub/min back stop - adjustable 1000 mm down holder 18 St oil volume 350 l total power requirement 22,5 kW weight of the machine ca. 8 t dimensions of machine L x W x H 3,96 x 2,10 x 2,22 m - with adjustment of cutting gap - Accessories: electr. back gauge, spare knives

Condition: used, Year of construction: 1990, sheet width 3050 mm plate thickness 6 mm distance between columns 3460 mm table height 800 mm Kedpevxwmyjfx Ah Njll 0 220 bar cutting angle adjustment 0,5x3 ° down holder 18 back stop - adjustable 750 mm front stop - adjustable 1000 mm main drive 7,5 kW oil volume 300 l total power requirement 7,5 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,7x2,0x1,8 m cutting angle adjustment manually blade gap adjustment manually angle stop

Condition: used, Year of construction: 1992, Technical details: sheet width: 4050 mm plate thickness: 16 mm distance between columns: 4900 mm control for program: Robosoft SC5 Controller back gauge: 1000 motorisch cutting angle: 0,5° - 3° ° cutting gap adjustment: ja / jes mm down holder: 23 Stück height over floor: 1030 mm Table dimensions: L x B 4000 x 520 mm weight of the machine ca.: 19,2 t dimensions of machine: 5,2 x 2,2 x 2,78 m characteristics: - knife length 4100mm, 4 turns possible - Number of strokes: 5 - 11 strokes/min. - Table: side stop with linear scale, with stop bar 1000mm removable, feed aid via / with ball bearings - front support: LxWxH: 1600 x 1100 x 1000 mm; movable over roller rail, easy handling - backgauge adjustable, motor driven and foldable Operation via control panel with jib lenmgth arm and foot control Equipment: - light grid at backgauge - cut line ilumination Ksdpfx Asu Icpcoh Njll Accessories: - 1 set (2 pieces) shearing blades *

Condition: good (used), functionality: fully functional, Year of construction: 1993, sheet thickness steel (max.): 13 mm, back gauge: 1,000 mm, cutting length (max.): 3,050 mm, motorized limit stop cutting crack adjustment cutting angle adjustment foot switch Technische Daten / technical details: Schnittlänge / max. cutting length 3050 mm Schnittleistung / cutting capacity 13 mm Hinteranschlag / limit stop 1000 mm Kljdpfx Ahev Tk Efo Nsl Antriebsleistung Motor/ drive capacity motor 22 kW Gewicht der Maschine ca. / weight 8000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 1991, pressure 300 t chamfer lenght 4100 mm distance between columns 3710 mm stroke - stepless adjustable 250 mm column arm 330 mm dayligth 500 mm table height 940 mm table width 250 mm working feed 7.0 mm/sec return speed 90.0 mm/sec Control konv. operating pressure max. 305 bar Kjdpexab I Tjfx Ah Nsll voltage 380 V total power requirement 22.5 kW weight 25200 kg range L-W-H 4320 x 2100 x 3500 mm well-maintained condition (!!) - in checked condition - machine video - ?v=rPOBwTfVReo Equipment: - simple, conventional hydraulic press brake - swiveling control panel, left front - electro-motoric back stop (X axis) * adjustment via front control panel (button) * with analog position display * fine adjustment via handwheel, front - with 3x stop fingers, manually adjustable - electro-motoric depth adjustment (Y1+Y2 axis) * with analog position display - 1x split set of 85° deer foot upper tool - 1x MultiV - universal die block, with several V-openings - 2x front, stable support arms - 1x freely movable double foot switch - 1x freely movable 2-hand control - side safety device (swivelling doors) - rear safety device (sliding door) - original operating instructions

Condition: good (used), Hydraulic pump, oil pump, gear pump, press brake, folding bench, folding machine, hydraulic punch, hydraulic punch -Spare part: Hydraulic pump from Atlantic press brake type: HPT 13536 Ksdefpidiopfx Ah Nsll -Manufacturer: Eckerle -Pump type: 1PF2GH3-12/013RE07MU2 -Drive: Loher type 132M-4 -Power: 7.5 kW 1440 rpm -Dimensions: 800/370/H300 mm -Weight 98 kg

Condition: good (used), Plate shears cutting blades, replacement blades for plate shears, replacement cutting edges, cutting blades, shear blades Ksdpfx Ajxf Dpkjh Noll -Cutting blades. Replacement blades for Atlantic ATS 3006 guillotine shears, 2 pieces -Cutting length: 3120 mm -Hole spacing: 195 mm / M14 see photos -Dimensions: 49/19/3120 mm / 49/19.4/3120 mm -Price/Delivery: complete -Transport dimensions: 3200/120/H190 mm -Total weight: 57 kg

Condition: used, 4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Spare part: hydraulic control block comes from an Atlantic press brake type: HPT 13536 -Manufacturer: Rexroth -Valve type: S-4WE 10 F32 CG24/9Z4 C -Manufacturer: Sauer Sundstrand -Valve type: D24 SWH-G02-B2- -20 -Voltage: V -Pressure max: bar -Price: for all 5 pieces of valves -Dimensions: 600/700/H600 mm -Weight: 67 kg Klodpfxefpifcj Ah Nel

Condition: ready for operation (used), HACO - ATLANTIC HPA 30-135 / Pressing force 135 tons - Pressing force: 135 tons - Bending length: 3050 mm - Clearance between uprights: 2550 mm - Complete upper beam / tooling and separate segments in various lengths - Two dies - Motorized height adjustment - Back gauge - manual - 2x front support / material support Klsdpfjx Swg Esx Ah Nel - Foot switch / hand switch Dimensions: LxWxH: 4x1.9x2.5 meters / Weight: 8500 kg Subject to errors and input mistakes

Condition: excellent (used), Year of construction: 2001, Technical data: Year of manufacture: 2001, service in 2024 Working length: 3100 mm Stand width: 2650 mm Pressing force: 300 tons CNC control: Robosoft BC55 touch graphics 2D Kedpfovy H Iiex Ah Nsll Controlled axes: Y1 / Y2; X CNC table bending compensation Projection: 300 mm Stroke: 350 mm Motor power: 18 kW Dimensions (length x width x height): approx. 4200 x 2200 x 3700 mm Weight: approx. 19 tons Accessories: various tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: like new (used), functionality: fully functional, Mitsubishi Atlantic Hydragreen heat pumps, designed to the highest quality standards. Installed in 2018 and 2019, they have never really been used. In very good condition. 30kW capacity. Four units available. Kodpfx Asxvfa Eoh Njll

Condition: good (used), Year of construction: 2003, machine/vehicle number: 81913, Offer 25449 Kedox I I Hbepfx Ah Njll Technical Data: - Press force: 135 t - Working width: 3100 mm - Clearance between uprights: 2600 mm - Table width: 180 mm - Throat depth: 250 mm - Installation height: 325 mm - Approach speed: 70 mm/sec - Working speed: 7 mm/sec - Return speed: 60 mm/sec - Ram stroke: 120 mm - Adjustment range of fixed stops: 120 mm - Drive: 400 V / 7.5 kW - Oil filling: approx. 300 l - Space requirement: approx. W 3300 x H 2400 x D 1600 mm - Weight: approx. 7500 kg - Equipped with: - Swing-arm control panel with HACO ATS 560 control - For setting pressing depth + pressing force + backgauge - Motorized backgauge - 4-way universal die + sharp tool - Goose-neck tool incomplete - Two-hand operator panel with foot switch - Support arms

Condition: new, functionality: fully functional, New and used controllers for press brakes. Kodpex Hkrwsfx Ah Njll For replace, spare parts and retrofitting. Cybelec Cybtouch8, Cybtouch 12, Modeva Pac 15 TP10S, E21 Estun, E22 etc. Other types on request. We can buy your tired press brake for spare parts.

Condition: good (used), Year of construction: 1989, machine/vehicle number: 56089, Pressure: 135 t Working width: 4100 mm Clear distance between columns: 3150 mm Stand projection: 250 mm max. installation height: 310 mm Working speed: 7 mm/sec Kjdpfx Ahjnzhvkj Nell Return stroke speed: 50 mm/sec electr. Connection: 400 V, 11 kW Weight: 10.8 tons Required space: 4250 x 1800 x 2400 mm