Used Wood Chip Boiler for sale (11,316)

Condition: used, operating hours: 30,374 h, functionality: fully functional, machine/vehicle number: 000-0059085/3, overall weight: 997 kg, volume flow: 209 m³/h, power: 113.9 kW (154.86 HP), heating capacity: 99 kW (134.60 HP), smoke pipe connection diameter: 200 mm, nominal heat output: 113.9 kW (154.86 HP), space requirement length: 3,140 mm, space requirement height: 2,400 mm, space requirement width: 2,170 mm, temperature: 90 °C, total height: 2,310 mm, total length: 2,040 mm, total width: 860 mm, type of input current: three-phase, exhaust gas temperature (max.): 160 °C, input voltage: 400 V, negative pressure: 15 Pa, nominal power: 99 kW (134.60 HP), tank capacity: 10 l, input current: 13 A, operating pressure: 3 bar, Equipment: documentation/manual, hot water, KWB UNIT USV100 / Multifire – 99 kW biomass boiler Used Austrian boiler with KWB Comfort 3 controls, output modulation, lambda and negative-pressure control, automatic heat exchanger cleaning and ash extraction. Technical data: Codpfx Abozhh Iijaehd - Nominal heat output: 99 kW - Minimum output: 27.6 kW - Fuel input: 113.9 kW - Water capacity: 167 litres - Maximum operating pressure: 3.5 bar - Maximum temperature: 90 degrees C - Weight: approximately 997 kg - Flue connection: 200 mm - Operating hours: 30374 h Data plate specifies 6 mm wood pellets. Wood chip operation depends on the installed extraction and conveying equipment. Exact equipment and scope of delivery by arrangement. Located in Mosonmagyaróvár, Hungary. Inspection by appointment. Transport, installation and commissioning by the buyer.

Condition: used, temperature: 95 °C, input voltage: 400 V, operating pressure: 3 bar, Fröling Turbomatic TMC 48 used wood chip and pellet boiler with Lambdatronic control. Suitable for larger properties, workshops and commercial buildings. Nominal heat output: 48 kW. Water capacity: 185 litres. Maximum operating pressure: 3 bar. Maximum temperature: 95 °C. Electrical connection: 400 V / 50 Hz, 12 A, 430 W. Net price: EUR 6,000. Exact scope of boiler, feeding equipment and accessories by agreement. Cjds Afbq Aspfx Abashd Inspection by appointment in Mosonmagyaróvár, Hungary. Loading and transport by arrangement. Installation and commissioning are the buyer’s responsibility.

Condition: used, temperature: 95 °C, input voltage: 400 V, operating pressure: 3 bar, Fröling Turbomatic TMC 35 used wood chip and pellet boiler, offered with feeding and fuel extraction system. Nominal heat output: 35 kW. Output range: 10.5–35 kW. Water capacity: 114 litres. Codpfs Afbq Nsx Abaohd Maximum operating pressure: 3 bar. Maximum temperature: 95 °C. Electrical connection: 400 V / 50 Hz. Lambda-controlled combustion and automatic heat exchanger cleaning. Net price: EUR 8,000 including the advertised feeding and extraction system. Exact delivery scope and availability by agreement. Inspection by appointment in Mosonmagyaróvár, Hungary. Loading and transport by arrangement. Installation and commissioning are the buyer’s responsibility.

Condition: used, functionality: fully functional, overall weight: 4,000 kg, smoke pipe connection diameter: 200 mm, nominal heat output: 300 kW (407.89 HP), space requirement length: 4,040 mm, space requirement height: 2,250 mm, space requirement width: 5,150 mm, temperature: 95 °C, total height: 2,250 mm, total length: 3,450 mm, total width: 1,250 mm, operating pressure: 5 bar, Equipment: documentation/manual, Gilles HPKI-K 300 industrial wood chip boiler Used Austrian biomass boiler for industrial, agricultural and commercial heating. Technical data: - Nominal output: 300 kW (W40) - Output range: 90.2 to 300 kW - Fuel: wood chips G50 / G100 - Water capacity: 1100 litres - Maximum operating pressure: 5 bar - Maximum temperature: 95 degrees C - Supply and return: DN 80 - Length: 3450 mm - Width: 1250 mm - Height: 2250 mm Codpfszwkrpex Abashd - Weight: approximately 4000 kg - Flue connection: 200 mm Operating manuals and technical documentation available. Exact scope of delivery, availability and collection by arrangement. Inspection by appointment. A wide selection of boilers, feeders, pumps, buffer tanks and heating accessories is available. Transport and installation are arranged separately.

Condition: used, temperature: 95 °C, input voltage: 400 V, operating pressure: 3 bar, Fröling Turbomatic TMC 110 used wood chip / pellet biomass boiler, supplied with screw conveyor and spring-arm fuel extraction system. Nominal heat output: 110 kW. Water capacity: 320 litres. Maximum operating pressure: 3 bar. Maximum temperature: 95 °C. Electrical connection: 400 V / 50 Hz. Net price: EUR 10,000 including the advertised feeding and fuel extraction equipment. Exact delivery scope and configuration by agreement. Chjdpfx Ao Afbqvebajd Inspection by appointment in Mosonmagyaróvár, Hungary. Loading and transport by arrangement. Installation and commissioning are the buyer’s responsibility.

Condition: good (used), Year of construction: 2013, Wood chip boiler for steam up to 150 degrees or for water only Chodpfx Absy Dfd Neaod with hydraulic feed system maximum thermal output up to 850 kW suitable for dry material

Condition: excellent (used), KWB Powerfire TDS 150 – automatic biomass boiler Used Austrian wood chip and pellet boiler with modulating output from 45 to 150 kW, suitable for commercial, agricultural and industrial heating. Key features: - Moving grate combustion - Lambda-controlled combustion and cyclone combustion chamber - Automatic heat exchanger cleaning - Automatic ash extraction - Wood chips G30/G50 or pellets Factory specifications: - Nominal output: 150 kW Cedpfxezqnp Se Abashd - Minimum output: 45 kW - Maximum operating pressure: 3.5 bar - Maximum supply temperature: 90 degrees C - Water capacity: 300 litres - Efficiency with wood chips: 90.4 percent at nominal load In stock. Inspection by appointment. Please confirm the exact scope of delivery and accessories before purchase. Transport and installation by separate arrangement. We also offer wood chip boilers, pellet boilers, wood gasification boilers, feeders, pumps, buffer tanks and heating accessories.

Condition: good (used), functionality: fully functional, power: 398 kW (541.13 HP), gearing type: automatic, color: green, machine/vehicle number: 100114331.Y, PRICE IS FOR 2 UNITS - CAN BE SOLD SEPARATELY! Froling Biomass Boiler with CORDIVARI Buffer Tank - Complete Commercial Heating Systems Offered for sale is a high-capacity biomass heating system comprising a Froling TX 200 biomass boiler and CORDIVARI thermal buffer tank (puffer). This is a commercial-grade installation, designed for high-demand environments such as agricultural operations, industrial units, estates, and large-scale residential projects. The system has been installed and powered on for testing. Boiler Specification (Froling TX 200): • Boiler class: EN 303-5 Class 5 (high-efficiency, low-emissions standard) • Nominal heat output: 199 kW • Heat output range: 59 – 199 kW • Nominal fuel input rate: 214 kW • Permitted fuels (EN 14961): Wood pellets (Part 2: D06, Class A1) Wood chips (Part 4: P16A – P45A, Class A2) • Max. operating temperature: 90°C • Max. operating pressure: 3 bar • Water content (boiler): 570 litres • Electrical connection: 400V / 50Hz / C35A • Power consumption: 285 – 650 W • Production number: 100114331.Y The Froling TX 200 is a premium biomass boiler known for high efficiency, automated operation, and reliability in continuous-use environments. Paired with a CORDIVARI thermal buffer tank, the system delivers improved heat management, reduced cycling, and optimal energy utilisation. The system is also equipped with an automatic biomass feeding system from upper storage containers, ensuring consistent fuel delivery and minimal manual input. Important: The biomass system has not been used in full operation - it has only been tested. Operating time can be verified via the built-in digital counters, which display the total minutes the system has run. Csdpfx Aboyw I Hmjajhd This combination provides a stable and efficient renewable heating solution, ideal for buyers looking to reduce long-term energy costs while meeting environmental targets.

Condition: excellent (used), Year of construction: 2024, Wood-Mizer CNC5003 CNC Machining Center – practically unused Key data • Category: CNC machining centers / CNC routers for wood (nesting) • Year of manufacture: [2024] • Condition: practically unused, demo / showroom unit • Location: [KOŁO], Poland • Availability: 2 units in identical specification — discount available if both are taken • Sold directly by the manufacturer, no intermediaries Description An industrial-grade CNC machining center at a mid-range machine price. Why this machine is worth considering • Only premium, branded components — no generic parts: FANUC, HSD, HIWIN, ATLANTA, FESTO, BECKER. Each of these components is serviceable and supported worldwide, independently of us as the machine builder. • FANUC control — the world's most widely used CNC platform, standard ISO G/M code, ready to interface with any CAM system. Support, training, and service are available from any authorized FANUC partner or CNC integrator. • Gantry design with dual drive — high stability and accuracy, high-resolution digital servos, low vibration. • 3095 × 1535 mm working area accommodates a full 3050 × 1530 mm panel — an entire sheet is machined in one setup, with no pre-cutting and no repositioning. • 6-zone vacuum nesting table with 216 vacuum points — exceptional flexibility in work-holding: panels, irregular parts, and porous materials. • The machine is on-site and available for inspection and a test cut before purchase, along with the available technical documentation. Technical data Specification Value Actual working area X / Y 3095 × 1535 mm (max. raster table area) Z-axis travel 200 mm Rapid traverse X / Y / Z 60 / 30 / 15 m/min Spindle HSD 11 kW, HSK63F, 24,000 rpm, inverter-driven, ceramic bearings Tool changer ATC — 12-position carousel on the gantry, service access hatch Drives and guideways ball screw, linear guides, and carriages by HIWIN; rack and pinion by ATLANTA Control FANUC, ISO G/M code, PC and CAM interface, built-in server Table grey extruded polypropylene raster table; 6 zones × 36 points = 216 individual vacuum points, each zone with its own valve Vacuum pump BECKER, 126 m³/h, 4 / 5.5 kW, max. vacuum 0.9 bar Pneumatics FESTO Chip extraction articulated extraction hood Control panel movable, on wheels — access from 3 sides of the table; local operation or via network Frame size (footprint) 1570 × 4150 mm Total length / width / height 4460 / 3000 / 2400 mm Materials: wood, sheet materials, plastics, foam, composites, light alloys (aluminum). Terms of sale — stated openly • Sold as-is, without a manufacturer's warranty and without service support from our side — our CNC project has been discontinued. This is the only reason for this price. Codpfx Asyr Dawebajhd • Service and wear parts are available directly from the component manufacturers (FANUC, HSD, HIWIN, BECKER, FESTO) and from independent CNC integrators. • Inspection and a test run on-site are welcome — bring your own material and file. • Net price, EXW [KOŁO]. Loading is our responsibility; transport and unloading are the buyer's responsibility. Intra-community supply (0% VAT) for EU buyers with a valid VAT ID. • We can connect you with companies offering commissioning and operator training (third-party service, priced separately).

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Chjdoqmi Iropfx Abajd Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: used, -Fuel delivery system -Biomass combustion system -Hot water boiler -Ash removal system -Flue gases primary cleaning system -Stairs and service platforms -Draft fan - Automatic control system -Chimney -Circulation system and water treatment Csdpfxowfpwpj Abashd Main parameters and guarantee value are calculated according to fuel parameters: -Moisture 60-65 % -Ash till 8 % - Calorific value 7990 kJ/kg and 1907 kcal/kg Main parameters of the furnace 6000 K: - Maximal designed thermal output – 6.5 Mw - Maximum continuous rate – 6 MW - Furnace regulation range 20% - 100% - Volume of furnace- 31.6 m3 - Volume of combustion chamber – 24m3 - Grates area 12 m2 - Grates designed thermal load – 500 Kw/m2 - Combustion chamber designed thermal load – 250 Kw/m3 - Maximum temperature in the combustion chamber - 900°C The following kinds of biomass are accepted for combustion in the furnace: - wood chips – 100% - forest wood residues- 100% - saw dust – 100% (G15) - chunk peat – 100% - bark – 100%

Year of construction: 1990, condition: good (used), Throwing fan ideal for wood chips, with feed conveyor belt approximately 3 m long. Blade span 900 mm, equipped with 11 kW motor. Chedeyy Uzcopfx Abajd

Condition: ready for operation (used), Year of construction: 2009, A Nolting moving grate wood-fired boiler system is offered. Max. boiler output: 1125kW, nominal heat output: 900kW/1125kW, max. fuel moisture: W50/M30, optimum efficiency range: >90%, flue gas connection: DN250. Machine weight: approx. 4800kg. Inspection possible by arrangement. Chedpezt Sk Eefx Abaod

Condition: excellent (used), Year of construction: 2002, Selling an AHENA boiler. In very good working condition, operates on sawdust and wood chips. Codpfx Asxf Nyhjbajhd

Condition: good (used), Year of construction: 2013, Heating system for wood fuel (wood chips or logs), can generate steam up to 150°C, but is also suitable for hot water. Hydraulic feed, therefore larger fuel material can also be used. Heating capacity up to 850 kW, but can also deliver up to 1 MW thermal output. The unit is currently in storage. Chsdpsyhlrmsfx Abaed

Condition: used, Year of construction: 2007, functionality: fully functional, power: 100 kW (135.96 HP), heating capacity: 100 kW (135.96 HP), nominal heat output: 100 kW (135.96 HP), nominal power: 100 kW (135.96 HP), tank capacity: 5,000 l, We are offering this used HDG Bavaria 100kW heating system with articulated arm discharge, manufactured in 2007. Chjdpfsyrhd Tox Abajd Manufacturer: HDG Bavaria Model: 100kW with articulated arm discharge Year of manufacture: 2007 If you have any questions or require further information, please feel free to send us a message or give us a call. The system is currently still in operation and can be inspected. The offer includes a 5,000L buffer tank, control unit, and various spare parts (which we have kept in stock as a precaution).

Condition: like new (used), Very well-preserved, almost as-new KÄLIN grinding/planing machine. Year of manufacture 2009/2010, Type Caster IPC 6.000. The machine is in excellent condition and comes complete with all motors and accessories for the production of up to a maximum of 6 tons/hour of grinding wood. The system includes a Siemens S7 control, grinding equipment and grinder type SL 800, along with all planer heads and a set of spare cutter heads. Extraction system and complete conveying technology for chip transport are included. The machine has been professionally dismantled and is ready for immediate pickup. Storage location: Southern Germany. Inspection is possible at any time. Chodpfx Abeykmlmeajd Sale by customer order.

Year of construction: 2008, operating hours: 133 h, condition: used, JBM Wood Chipper, Model 630 MDX, mounted on a single-axle chassis / car trailer > Kubota diesel engine, 44 kW (60 hp) > Spring-suspended, braked single-axle chassis > Wide feed opening: 310 x 220 mm > Log diameter up to 220 mm > Adjustable wood chip length: 0 – 25 mm > Weight: approx. 1,690 kg > Only 133 operating hours! > Year of manufacture: 2008 Codpozyf Htefx Abashd Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. will gladly assist you. Further information can be found on our website. Errors and prior sale excepted! = Further information = Year of manufacture: 2008 Operating hours: 133 Please contact Tobias Ebert for further information.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 2,150 kg, Used Hamech Biomass Boiler System for Sale Reliable Hamech biomass boiler system consisting of a KWH 300 heat-exchanger section and AZSD 250 combustion unit. Designed for efficient combustion of wood chips, sawdust, and wood shavings with fuel moisture up to 40%. The package includes: Chodpfx Ae Ah Swdebaed KWH 300 heat exchanger AZSD 250 combustion chamber with static grate SE 5 control system DN 400 chimney (8 m) Fuel discharge system Fire-extinguishing equipment 27 m³ fuel bunker Suitable for wood-processing plants, biomass heating facilities, and industrial applications requiring a reliable hot-water heat source. Condition: Used Manufacturer: Hamech Availability: On request For further technical information, inspection, and price offer, please contact us.

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 3GBG252051-ADK,002,009, The machine is a wood gasifier that converts the gas from wood chips into electricity that is generated from a 6-cylinder GM engine. The machine was acquired as part of the property that includes a boutique hotel. It was subsequently shut down when we did not have the capacity to operate it and the hotel. We expected to once again redeploy it but the base business keeps us too busy to add the operation and maintenance required of the machine. Chjdpfs Adl Hrsx Abajd

Condition: used, HAAS Wood Chip Screening Machine Manufacturer: HAAS Recycling Systems Country of origin: Germany Type: Vibrating chip screen Designed for screening wood chips, bark and biomass materials Suitable for separating fine particles and contaminants Vibrating screening system Multiple material discharge fractions Approximate dimensions: Cjdpszmfq Sefx Abaohd Length: 4.29 m Width: 2.10 m Suitable for woodworking and biomass processing industries

Condition: reconditioned (used), Year of construction: 1985, Hacker, factory-refurbished in 2023 for €7,500. Motor: 22 kW Chjdps Agw U Nofx Abaod Equipped with 49 impact blades Throughput: 300 - 1500 kg/hour Screen hole size: 25 mm Operating hours: 7738 Infeed hopper: 90 x 90 cm With an additional hopper on top, measuring 1 x 1 m, total height: 265 cm.

Year of construction: 2023, condition: new, Complete solution for transporting bulk goods such as wood chips, wood pellets, shredded goods, granulate, etc. Aluminum angled conveyor incl. substructure horizontal area 1.500mm(customizable) Rising range 3.000mm (customizable) Infinitely adjustable angle in the kink Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. We always have various systems of this type in stock. The delivery time for an individual system is currently around 3-4 weeks, depending on the production effort. Our core competence lies in supplying the customer with exactly what he really needs. Chodpfjk S Dw Esx Abasd Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: used, JBM Wood Chipper, Model 630 MDX, mounted on a single-axle chassis / car trailer > Kubota diesel engine, 44 kW (60 hp) > Spring-suspended, braked single-axle chassis Cedpj Aftn Tefx Abashd > Wide infeed opening: 310 x 220 mm > Log diameter up to 220 mm > Adjustable wood chip length: 0–25 mm > Weight: approx. 1,690 kg > Only 133 operating hours! > Year of manufacture: 2008 Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. will be happy to assist you. For more information, please visit our website. Errors and prior sale excepted! = More information = Year of manufacture: 2008 Payload: 1,750 kg GVW: 1,750 kg Please contact Tobias Ebert for more information.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, heating capacity: 350 kW (475.87 HP), Heating system, heating, chip heating Manufacturer Endress Type USF-W 350 Output 350 kW Year of manufacture 2010 with feed with ash discharge Chsdpfx Abeznca Hjasd with control