Used Biomass Burner for sale (815)

Condition: used, Lenght: 1,56 m B0Crhd0Iha Width: 1,56 m Height: 2,4 m Dust/gas burner. Completely new. Wood powder: - Fuel effect, max - 31,6 MW - Fuel effect, min - 20% - Wood powder flow, max - 6580 Nm3/h - Wood powder flow, min - 1320 Nm3/h - Fuel density max. - 250 kg/m3 - Fuel density min. - 180 kg/m3 - Dosing screw speed, max - 85 rpm - Dosing screw speed, min - 12 rpm - Dosing screw frequency, max - 88 Hz - Dosing screw frequency, min - 12 Hz

Year of construction: 2010, Condition: used, Flame heating device Roland Groß + Söhne GmbH Ring burner for heating Type 1 x 1" Ionization Make No. ALMA 01 Year of construction 03/2010 Connected voltage: 230 Volt Pe gas max.: 500 mbar Pe air max.: 10 bar Vgas max.: 30 Nm3/h Vair max.: 300 Nm3/h Including 10 pieces of different flame ring nozzles - Flame control Hans Henning - Ring nozzle hinged from 2 half shells, inside Ø 310 mm, with hose plug-in coupling and ignition device, outlet on front side - Ring nozzle hinged from 2 half shells, inside Ø 400 mm, with hose plug-in coupling and ignition device, outlet in the center - Ring nozzle hinged from 2 half shells, inside Ø 490 mm, with hose plug-in coupling and ignition device, outlet centered - Ring nozzle hinged from 2 half shells, inside Ø 500 mm, with hose plug-in coupling and ignition device, outlet on front side - Ring nozzle hinged from 2 half shells, inside Ø 590 mm, with hose plug-in coupling and ignition device, outlet in the center - Ring nozzle hinged from 2 half shells, inside Ø 690 mm, with hose plug-in coupling and ignition device, outlet centered - Ring nozzle hinged from 2 half shells, inside Ø 690 mm, with hose plug-in coupling and ignition device, outlet on front side - Ring nozzle hinged from 2 half shells, inside Ø 800 mm, with hose plug-in coupling and ignition device, outlet in the center - Ring nozzle hinged from 2 half shells, inside Ø 890 mm, with hose plug-in coupling and ignition device, outlet on front side - Ring nozzle hinged from 2 half shells, inside Ø 890 mm, with hose plug-in coupling and ignition device, outlet in the center - Ring nozzle hinged from 2 half shells, inside Ø 990 mm, with hose plug-in coupling and ignition device, outlet centered - Ring nozzle hinged from 2 half-shells, arc length 1500 mm, with hose plug-in coupling and ignition device, center outlet For heating pipes and vessels. For heating steel to welding temperature. Be0P88Us Ideal for repair welding and production of welded components from fine-grained steels. Preheat for powder flame spraying or Sulzer Metco high velocity flame spraying. Heating with gas for thermal coating.

Condition: excellent (used), Year of construction: 2021, Operating hours: 1,200 h, Functionality: fully functional, 3600*2400 is the largest glass size. Bf98Nngka

Year of construction: 2003, Condition: good (used), Weishaupt gas burner Monarch Burner type G7/1-D Version ZMD Power 300 - 1750 KW Bwh2Rc7Zkv Including gas line ( gas fitting ) Burner was recently in operation

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, 1 fired Weishaupt gas burner ----- Type : G70 / 2-A Version : ZM-NR NoX-Cl. : 2 Output : 1.000 - 10.500 kW Gas type : N Gas pressure : 15 - 500 mbar CE mark : CE0085 Year of construction : 2007 Uj8Pxavbgd with gas control line, with WFM 200

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Total width: 2,440 mm, Total length: 4,200 mm, Total height: 1,996 mm, Temperature: 700 °C, Type of input current: AC, Outer dimension length: 20,000 mm, Energy consumption: 980 kWh, Input current: 380 A, Outer dimension width: 3,800 mm, Power: 980 kW (1,332.43 HP), Workpiece height (max.): 19 mm, Chambers: 1, Cuptor de securizare ,în stare bună de folosință Upg8G2U9W2 Cuptorul se va vinde fără motoare

Condition: new, Year of construction: 2023, Functionality: fully functional, BALTUR GAS BURNEN Iswgan3 NEW

Year of construction: 1998, Condition: used, Nozzle cleaning machine, torch cleaning station Gas nozzle cleaning device for MIG MAG robot welding machines BINZEL Type BRS Ident. No.: 8310260 Device No.: 4212 Year of construction: 1998 Welding nozzles dirt cutter for robots with gas-shielded welding unit Operating voltage: 24 Volt DC/DC voltage cutter diameter inside: 8 mm cutter diameter outside: 12 mm stroke movement: 50 mm Pneumatic compressed air connection: 6 to 8 bar - Milling drive via air motor (Desoutter) - pneumatic cutter feed movement (stroke movement) - exchangeable cleaning cutter - gas nozzle fixation via pneumatic prism clamp space requirement: L x W x H 240 x 230 x 380 mm own weight: 8 kg good condition Ettoqkfli The automatic milling machine for single wire welding torches comes from a robot welding cell and worked without problems until disassembly.

Condition: excellent (used), Year of construction: 2006, For sale are functioning and very well maintained dual fuel oil/gas burners (2 pieces), Weishaupt Monarch, GL-5 (940kw) with gas line and control cabinet 1st year of manufacture - 2006 2nd year of manufacture - 1999 GL-5 (940 kw) -2piece -Power: 200-940 kw - 20-70 kg/h -Design: ZMD/ZD - Year of manufacture: 2006/1999 - Delivery is possible on request - All technical data can be seen on the pictures Preferred sale to dealers, traders or export. Ca87Van9 All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors.

Condition: used, Year of construction: 2009, Capacity: 30 MW Ppnnx Fuel quality: Wood powder/Grind size

Condition: used, Flame cutting system, torch, oxy-fuel cutting system, cutting torch, welding torch, hand cutting torch, welding set -Zinser: burner set set in sheet metal box -Accessories: see pictures Fq222Tr -Dimensions case: 480/230/H90 mm -Weight: 6 kg

Condition: like new (used), Year of construction: 2024, WISSMATEC drying system Push floor dryer, drying container, biomass drying, continuous dryer for areas such as Wood, agricultural, feed and pellet production Food, cardboard, cement and recycling + more suitable for Wood chips, pellets, biomass, animal feed, pulp, sewage sludge, alternative fuels + more Drying floor with slotted bridge plates Hydraulic moving floor Outlet opening Filling and exhaust air openings Drying capacity depends on the material Material quantity Material moisture Dpriiv

Year of construction: 2014, Condition: excellent (used), -Model: ET 94/SC -Series number:SN006968 -Year of manufacture:2014 -No. of floors: 4 -No. of doors: 1 -Interior dimensions (WxD): 920x1300 mm -Oven dimensions (WxDxH): 1440x2010x2720 mm Dpoy77 -Oven + extractor height: 2300 + 420 mm -Total oven length with integrated elevator: 3870 mm -Loading space with integrated elevator (E): 1860 mm + 370 mm -Baking surface: 4.80 m2 -Power: 20.04 Kw -Voltage: 400 V - 50 Hz -Weight: 2000 Kg

Condition: used, Functionality: fully functional, WLD-TEC Gasprofi 1 Gas Burner with bottle and pedal. Cj7Virwlze 2 for sale. 1 piece/200 EUR. Good working condition. Please check out our other listings as well.

Condition: like new (used), Year of construction: 2015, For sale is a working and very well maintained gas burner, brand WEISHAUPT Monarch WM G20/2-A (2100 kw) incl. gas fitting Dungs DN 65 and WEISHAUPT WM G20/2-A (2100 kw) - Output : 150- 2100 kw - Connection pressure : 15-500 mbar - Version : ZM - Delivery is possible on request - All technical data can be seen in the pictures Celodp3J8V Preferential sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors.

Condition: used, High-quality components from an originally planned bioethanol system are for sale. All parts are dry stored, some as new, some used. The most important components include: 1. downdraft evaporator -Manufacturer: Vaprotec -Technical data:Heat exchange area: approx. 300m², all equipment and piping in contact with product, vapor or vapor condensate made of stainless steel, material 1.4301, of equal or higher quality, -Planning: oInlet: -Quantity:7.695kg/h -Concentration:5.44 wt.%TS -Temperature: 80°C oOutflow: -Quantity:1.240kg/h -concentration:35% wt.%TS -temp.:65°C -Viscosity:max.200 cP oEvaporation capacity:6.725kg/h -Year of construction:2007 -Condition:Unused 2.2xPlate heat exchanger -Manufacturer:1xAlfa Laval Lund AB -Model:MX25MFMS -Technical data: -Pressure range:0/10bar oTemp. range:0/110°C o50m²Heat exchange surface -Year of construction:2007 -Condition:Unused -Manufacturer:1xAlfa Laval Lund AB -Technical data: o320m²Heat exchange area -Year of construction:2007 Dpmzwf -Condition:Unused 3.5xCentrifugal pumps -Manufacturer:KSB -Model:CPKN-C1 125-250 -Year of manufacture:2007 -Condition:Unused 4.1xLiquid vacuum pump -Manufacturer:Pompetravaini s.p.a./Travaini-Pumpen GmbH -Model:TRVA 65-450/C/A3+HSF 5 COLL -Technical data: oRpm:1450 oPump capacity:236m³/h oPressure range:33-900mbar -Year of manufacture:2007 -Condition:Unused 5.1xScrew compressor -Manufacturer:Rietschle -Model:Type2PKS60D1/0755, with sound enclosure -Year of manufacture:2001 -Condition:used 6.1xWine distiller in solid copper -Model:Distiller for the production of special brandies (fruit brandy wine, brandy) -Technical data:solid copper -Condition:used, conditionally ready for operation 7.1xMulti-column still -Manufacturer:Herrmann -Technical data: top of 3 columns, (1xnew), Starcosa type52.10K1/9, permissible operating overpressure 0.6bar, permissible operating temperature120°C, capacity19,235l, stainless steel, year 2001, as well as 1 auxiliary column, stainless steel, year approx. 1980, as well as 1 alcohol column, stainless steel, year approx. 1980, 1 indirect preheating system, Westphalen, capacity 750l, operating temperature 138°C, operating pressure 2.5 bar, with control. System parts made of V2A, the tube bundle heat exchanger made of copper. After the conversion, the system had an operating time of approx. 800 - 900 hours and was designed for an output of 1300 l cA/h with an alcohol strength of 85 % vol (approx. 31,200 1 rA/d). In 2001, a booster column with fusel oil and aldehyde extraction was integrated in order to achieve a product strength of 97 % vol. and a good alcohol quality. The new plant control system enables automatic operation This part of the system has an operating time of approx. 300 hours, so it is absolutely as good as new. The complete unit should have an hourly output of at least 10001 rA with an alcohol strength of 97 %vol (24,000 l rA/d). As all plant components are clearly oversized in their design, it is to be expected that an output of 13001 rA (approx. 31,200 l rA/d) can be achieved. Due to the decommissioning of the plant, the capacity could no longer be verified. The reinforcing column has a total height of 22m. -Additional information: Suitable for all starchy raw materials due to the special design of the mash column (high floor clearance, each floor can be opened individually for cleaning). Is built for continuous production -Condition: Used, conditionally ready for operation 9. various centrifugal pumps: -Manufacturer:Hilge -Condit

Condition: used, Heating, burner, gas burner, fan burner, gas fan burner -Manufacturer: Dreizler, fan burner type GE 200/300 AR 2 -Nominal heat output: 355 kW -Gas type: natural gas -Gas connection: 20 mbar B9Y2Wuhczu -Blower motor: 0.37 kW -Dimension: 760/510/H535 mm -Weight: 33 kg

Year of construction: 2005, Condition: excellent (used), -Dim:1420x2200x2200mm -Series number:8801680 -Baking surface:5.3m2 -Dim tiles:801x1230mm -Year:2005 -Number of decks:5 -Maximum temperature: 300 C° Dpoy2N -Voltage:400V -Heating power:53.6kw Dpoy2N -Weight:1064kg

Condition: new, Functionality: fully functional, WLD-TEC Gasprofi 1 SCS Micro Gas Burner. The smallest professional among the laboratory gas burners was developed in accordance with the current requirements in microbiological, cell-biological and biotechnological laboratories. WLD-TEC offers an additional alternative for safe flame sterilizing. With the button function the flame can be started and stopped easily by pushing the function knob. Cj7Qtrkphs Casing and operating controls: stainless steel / glass, UV and solvent resistant Burner head: removable and decomposable, stainless steel Cover of burner shaft: Ø 23 mm, with drains Measurements: (w x h x d): 95 x 49 x 86 mm Weight: 700 g Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2012, Working dual-fuel burners/oil burners/gas burners of the following types are for sale - 1st Weishaupt dual-fuel burner oil/gas of the brand Weishaupt GL 7/1-D, year of construction 2010, incl. gas line - 2. dual fuel burner/oil burner/gas burner, brand ELCO KLÖCKNER - burner type : EK 6.200 (1710 kw) ,with oil pump, incl. gas line Dungs DN 50.year of construction 2012 WEISHAUPT GL 7 - Output : 300 -1750 kw - 25 - 147 kg/h - Design : ZMD ELCO KLÖCKNER - Burner type : EK 6.200 GL - Output : 279-1710 kw - Capacity : 50 - 163 kg/h - Connection pressure : 15-300 mbar - Version : EU - With oil pump - Delivery is possible on request - All technical data can be seen on the pictures Preferred sale to dealers, traders or exporters All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. B2Onmmiskt

Year of construction: 2008, Condition: excellent (used), N°Serie:13471153 -Dim dalle:702x2450mm -Year:2008 -3 floors Dpoy0F -6 vents -With integrated loading elevator -Heat output:73.4kw -Voltage:400V -Power:46kw -Weight:2490kg

Condition: excellent (used), Year of construction: 2005, For sale are working and very well preserved oil burners of the brands weishaupt RL 40/1-B (2735) kw and L7- (1965 kw) and Ecoflam MAIOR P60 PR TL (710kw) - new Unused in original packaging 1. -Weishaupt : RL 40/1-B -Burner type : RL 40 -design : ZM -Power: 535-2735 kw 45-230 kg/h -Year of construction : 2012 2. - Weishaupt: L7T (1965 kw) - Burner type : L7T -Design: D -Output: - 325-1965 kW 27-165 kg/h - Year of manufacture: 2004 3. Weishaupt : L7Z (1965kw) Burner type: L7Z Version : D Output : 325 - 1965 Kw 27-165 kg/h Year of manufacture : 2010 4. ECOFLAM MAIOR P 60 PR TL (OIL BURNER)-NEW Output : 35-60 (kg/h) 415-710(kw) - Delivery is possible on request - All technical data can be seen in the pictures Preferential sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. Ccrv7Crure The seller accepts no liability for typing and data transmission errors.

Year of construction: 2011, Condition: excellent (used), -Dim: 1850x2430x2200mm -Dim slabs:602x1840mm -No. of floors: 4 -Year:2011 -N°series:16917191 -N°P:6775922 -With integrated elevator -8 vents -Voltage:400V -Heating capacity:78.4kw -Power:30.7kw -Weight:1910kg Cosoga2Jwu

Condition: excellent (used), Year of construction: 2014, For sale is a working and very good condition dual fuel burner brand Weshaupt monarch RGL60 ,gas line Dungs DN 100 Weishaupt RGL60 (dual fuel burner) Design : ZMD Output : 800-6900 KW 120 - 580 k/h Set pressure : 30 - 170 mbar - Delivery is possible on request - All technical data can be seen on the pictures Gyrius Preferential sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities.

Condition: excellent (used), Year of construction: 2006, -Dim: 1889x2204x2682mm -Dim tiles: 602x1230mm -N°series:11086922 -N°P:6775994 -Year:2006 -Cooking surface:4.4m2 -Voltage:400V -Power:32.5kw Dpomst -Weight:1410kg