Powder coating equipment
ROMER/ Electrostatic painting Curing Oven SL Series

Name: ROMER/ Electrostatic painting Curing Oven SL Series
Brand: ROMER/ Electrostatic painting
Price: 11500 EUR
Availability: InStock

ONO plus VAT

€11,500

Year of construction

2025

Condition

New

Location

Skarżysko-Kamienna Poland

Powder coating equipment ROMER/ Electrostatic painting Curing Oven SL Series

ROMER/ Electrostatic painting Curing Oven SL Series

Machine data

Machine type:: Powder coating equipment

Manufacturer:: ROMER/ Electrostatic painting

Model:: Curing Oven SL Series

Year of construction:: 2025

Condition:: new

Price & Location

ONO plus VAT

€11,500

Location:: ul. Rejowska 99, 26-110 Skarżysko-Kamienna, Polska

Call

Details about the offer

Listing ID:: A4915041

Reference number:: SL 3

Update:: 16.06.2026

Description

Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️
At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅
Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯

🧠📡 Control and monitoring
Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅

🔥🧩 Heating module
Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️

🌀💨 Air circulation
Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅

🧱❄️ Insulation and design
Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉

🛡️⚠️ Safety and certification
Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷

⚡💰 High efficiency
Optimized heat transfer and reduced losses mean real operating savings. 📉🔥

⏰🤖 Automatic start
Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅

Bdedpfjfz U Nbjx Acnjg
🚪🔒 Self-latching doors + intelligent chimney
Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅

🌿🔋 ECO mode
Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉

👀💡 View and lighting
Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️

🛤️🔥 Guide rails + automatic hood
Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️

🎛️🌡️ MULTI-ZONE HEAT
Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅

🧠♨️ MTS system
Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️

2-in-1 🧱↔️🧱 Split chamber
Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁

🎚️🌀 VFD ventilation
Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Seller

Registered since: 2020

96 listings online

Call

Send inquiry

Telephone & Fax

+48 41 23... show

These listings may also fit your interest.

Listing

Sheet metal laser cutting machine Dynamic Power Laser GmbH 12 kW-DPL 1530 - Messepreis

Leipzig

18,263 km

Sheet metal laser cutting machine
Dynamic Power Laser GmbH12 kW-DPL 1530 - Messepreis

€170,000

Fixed price plus VAT

Call

Listing

Industrial robot Schleifzelle mit Roboter Kuka KR 180

Częstochowa

17,867 km

Industrial robot
Schleifzelle mit Roboter Kuka KR 180

Call

Condition: excellent (used), Year of construction: 2011, *The video is just an example of how this cell can be prepared. Grinding cell with Kuka KR 180 grinding robot Bdsdpfx Asg Saqvocnjg Berger grinding cell 2012 (external grinding A1) - Total weight approx. 6300 kg - Cell dimensions: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of manufacture 2011 - KRC 4 controller - Additional axis (7th axis) BSS10 belt grinding station - Max. belt dimensions 3500 x 30 mm - Max. contact wheel diameter 200 mm - Motor power 4 kW 2 x polishing stations - Polishing wheel diameter 350 - 600 mm - Power 5.5 kW Tool changer cabinet Interoll Automation GmbH belt conveyor - Total length approx. 2000 mm - Belt width approx. 440 mm We have 4 such cells.

See details

Listing

Continuous rotary table polishing machine BULA MP81 - sofort verfügbar

Dietzenbach

18,555 km

Continuous rotary table polishing machine
BULAMP81 - sofort verfügbar

Call

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Bsdpfx Acelccvmonodg Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

See details

Listing

DOWEL CROSS-CUT AND CHAMFERING MACHINE Löser AA220

San Giovanni Al Natisone

18,442 km

DOWEL CROSS-CUT AND CHAMFERING MACHINE
LöserAA220

Call

Listing

Treading machine ORT Italia - RT 10 ORT Italia RT 10

Babberich

18,541 km

Treading machine ORT Italia - RT 10
ORT ItaliaRT 10

Call

Condition: good (used), Year of construction: 1998, thread length: 65 mm, Treading machine ORT Italia - RT 10 MACH-ID 9322 Make: ORT Italia Type: RT 10 Control: Siemens SIMATEC Year: 1998 Maximum pressure: 10T Max. workpiece: 30Ø Min. workpiece: 2Ø Bdedpfx Acex H Rmusneg Min. Threading lenght:2mm Max. Threading length:65mm Pitch / lead: 30mm Shaft Ø: 85 - 135mm Length: 1600mm Width: 1400mm Height: 1800mm Weight: 2300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Listing

Sand Blasting System MHG Glasmaster 1500 Automatic

Germany

18,384 km

Sand Blasting System
MHGGlasmaster 1500 Automatic

Call

Year of construction: 1999, condition: ready for operation (used), Two automatic flat glass sandblasting systems MHG are available. 1) MHG Glastmaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500mm, max. glass thickness: 70mm, blasting capacity: 30m²/h, air consumption per nozzle at 4bar: 800l/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/1100mm, weight: approx. 2000kg, control: Siemens PLC. 2) Sandblasting system without nameplate, machine dimensions X/Y/Z: approx. 3200mm/2600mm/1100mm, weight: approx. 1500kg. An on-site inspection is possible. Bdjdpfsw Duvhjx Acneg

See details

Listing

Germany

18,384 km

Parts Cleaning System
MafacElba

Call

Year of construction: 2005, condition: ready for operation (used), Tank capacity: 775l, max. batch weight: 100kg, heating capacity: 26kW, max. temperature: 75°C, basket dimensions X/Y/Z: 660mm/480mm/338mm, fine filtration tank 1/2: 100µm/50µm. Machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 950kg. The machine was overhauled in 2024 and has not been used since. Including basket rotation with swivel drive, automatic water filling and oil separation with coalescence separation unit and oil collection container. Documentation available. On-site inspection is possible. Bodowr Dxhjpfx Acnjdg

See details

Listing

Bad Waltersdorf

18,216 km

Powder plant
Knipl

€35,000

Fixed price plus VAT

Call

Condition: good (used), Year of construction: 2011, functionality: fully functional, total height: 4,000 mm, inner dimension length: 6,500 mm, inner dimension width: 1,500 mm, inner dimension height: 2,200 mm, workpiece height (max.): 2,200 mm, workpiece length (max.): 6,500 mm, Equipment: cabin, Powder coating system for workpieces with dimensions: length 6500 mm, width 1500 mm, height 2200 mm. Bdodpfx Acovdlfzsnog

See details

Listing

Filter system suction exhaust system Oliver Fritz GmbH & Co. KG Filteranlagen

Großenlüder

18,474 km

Filter system suction exhaust system
Oliver Fritz GmbH & Co. KGFilteranlagen

Call

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Bdodpfxsdrtalj Acnjg Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

See details

Listing

Forced air drying oven Binder GmbH FED 720

Dresden

18,206 km

Forced air drying oven
Binder GmbHFED 720

Call

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum fuse rating: 16A Frequency: 50/60Hz Electrical connection power: 4.5kW Temperature range: +12°C above ambient temperature to 300°C Spatial temperature deviation at 150 °C: ± 2.0K Temporal temperature deviation at 150 °C: ± 0.6K Heating time to 150 °C: 25 min Recovery time after 30 s door opening at 150 °C: 6 min Air exchange rate at 100 °C: 5x/h Internal volume: 741 l Maximum load per insert: 45 kg Maximum total load: 315 kg Energy consumption at 150 °C: 800 Wh/h Maximum number of inserts: 16 External dimensions: Width: 1,165 mm Height: 1,590 mm Depth: 870 mm Bdjdpexzukkjfx Acnog Internal dimensions: Width: 1,000 mm Height: 1,300 mm Depth: 570 mm Important note: The wheels are installed/included.

See details

Advertise here