Used heating & blowers for sale (277)

Condition: good (used), Year of construction: 2020, Heat exchanger, rotary heat exchanger, exhaust air heat exchanger, microchannel heat exchanger, microchannel tube heat exchanger, condenser, evaporator coil, MCHE -Manufacturer: SunCo, microchannel heat exchanger -Type: SC-1800 -Heat exchanger: made of aluminum tubes with aluminum fins -Connection: with copper pipe, see photos -Dimensions: 1210/1150/H40 mm Dolsyh Ebrohccqleun -Weight: 16.8 kg

Condition: excellent (used), Year of construction: 2016, 1. Duelhccswgyp Eeqlsn RIELLO RS70 New, unused, in original packaging: (2 units available) - Power: 192-814 kW - Year of manufacture: 2016

Condition: ready for operation (used), Nominal heating output: 22.5-90kW, weight: 175kg, the machine was never used. Duslok S Eh Sshccqlon

Condition: ready for operation (used), Year of construction: 2024, A mint condition gas burner Elco is available. Burner capacity range: 510kW-950kW, gas types: G20/G25/G31, emission class: 3, combustion controller: TCH 5xx, max. gas inlet pressure G20/G25/G31: 300mbar/300mbar/148mbar, operating time: approx. 4 months. Machine dimensions X/Y/Z: approx. 600mm/550mm/1200mm, weight: approx. 90kg. Documentation available. An on-site inspection is possible. Duelhjxa Ekljccqlsn

Condition: ready for operation (used), Year of construction: 1990, A Weishaupt dual-fuel burner is available. Fuel: gas/fuel oil, gas type: N, category: I, set pressure min./max.: 30bar/180bar, heat output: 850kW-8550kW, oil throughput: 150kg-720kg/h, fuel oil: EL, engine output: 14kW, machine dimensions X/Y/Z: approx. 2100mm/1400mm/900mm. On-site inspection is possible. Duelhcowwlkvecqljn

Condition: ready for operation (used), Year of construction: 2022, An originally packaged Weishaupt burner is available. Thermal output range: 145kW-570kW, flame head: W40/1, typical pump pressure setting: 12bar, weight: approx. 40kg. Documentation available. An on-site inspection is possible. Dslsx Uq Uzshccqloun

Condition: ready for operation (used), A total of 71 Kroll air heaters are available, 30x LH 130 V10, 1x LH 130 V20, 7x LH 230 V10, 3x LH 330 V10, 1x LH 420 V10, 6x LH 430 V10, 1x LH 430 V20, 11x LH 530 V10 and 11x LH 630 V10. The fans are used and partly have bent fins and scratches. An on-site inspection is possible. Dolhcew Uk A Docqloun

Condition: ready for operation (used), Year of construction: 2017, Fuel: Natural gas, power range: 100kW-1000kW, connection pressure range: 15mbar-500mbar, NOx class: 2. An on-site inspection is possible. Dujlhoxp Rbujccqlon

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Preheating boiler (oil) Aura AKL 2504 G ▪ Power: max. 2500 kW ▪ Flow rate: max. 99 m3/h ▪ Pressure: max. 10 PS ▪ Temperature: -10 / 315 °C ▪ Volume: 1873 L Burner Weishaupt WM-G30/1-A ▪ Power: max. 3500 kW ▪ Gas type: Natural ▪ Pressure: max. 1 bar Djlhccqsxfa Tljloun

Condition: new, Year of construction: 2024, functionality: fully functional, fuel: electricity, input frequency: 50 Hz, Equipment: type plate available, ZIEHL ABEGG AXIAL FAN MAXvent owlet REF: DN12V-6DF.K9.14.P6 Casing: The fan casing is made of hot-dip galvanized steel, long version with a connection according to EUROVENT standards. The fan's operating temperature range is -20 to 50°C. Casing diameter: 1350 mm Impeller: The impeller is made of the new ZAmid composite material – it is extremely lightweight yet as hard as steel. The impeller is dynamically balanced and fitted with 6 blades at a 14° pitch. Duelhccqexvz Uxjlsn Impeller diameter: 1250 mm Number of poles: 6 SIEMENS three-phase motor: 400V 50Hz 9.57 kW 19.70A 980 rpm BRAND NEW EQUIPMENT, NEVER INSTALLED

Condition: new, Year of construction: 2023, functionality: fully functional, power: 150 kW (203.94 HP), fuel: diesel, Equipment: documentation/manual, type plate available, The REMKO "CLK 150" heating cannon is a powerful heater that can be used in halls, workshops, marquees, for materials, greenhouses, and more. Currently, 1 unit is in stock and available for immediate delivery. Condition: New / unused from warehouse clearance / insolvency sale Scope of delivery: 1 pc. Remko CLK 150 heater with oil burner 1 pc. room thermostat with power cable Nominal heat output: 150 kW Air flow rate: 9,710 m³/h Duelhccqjxli I Selon Fuel: EL heating oil Maximum fuel consumption: 14.8 L/h Flue gas loss: max. 9% Flue outlet: Ø 200 mm Air outlet: Ø 500 mm Connection voltage: 230 V Dimensions (H/W/D): approx. 1350 x 920 x 2100 mm Weight: approx. 312 kg The machine can be inspected on site by appointment. All information provided without guarantee. Subject to prior sale.

Condition: good (used), Year of construction: 2013, Heating system for fuel wood (wood chips or logs), capable of generating steam up to 150°C, also suitable for hot water applications. Hydraulic feed allows for use of larger fuel materials. Heating capacity up to 850 kW. Location: Austria. Djlhccqoyhlrmjleun

Condition: excellent (used), Year of construction: 2002, operating hours: 35,500 h, functionality: fully functional, overall weight: 2,000 kg, heating capacity: 150 kW (203.94 HP), temperature: 90 °C, screw conveyor length: 4 mm, Equipment: hot water, type plate available, HDG C 150 wood chip boiler – 150 kW with Pöllhuber articulated arm discharge for bunkers up to 6 m. Step grate for wood chips up to G 50 and shavings, automatic ash removal, dust separator and flue gas fan, control cabinet, operating manuals and spare parts lists. Emission values were always met; the latest measurement protocol is included. The plant will be dismantled in spring 2026. Dusljyhbxvehccqlon

Condition: new, Year of construction: 1988, For sale: mobile industrial fan from the former GDR, manufactured by VEB MAW Armaturenwerk Wehrsorf (Zittau), powered by a 0.75 kW motor from the USSR. Sturdy steel construction on castors – ideal for dust extraction, air supply, local ventilation, or machine cooling. Dujlhcjud R Iijcqlsn Technical data: • Airflow: 1020 m³/h • Total pressure: 834 N/m² • Static pressure: 681 N/m² • Density: 1.20 kg/m³ • Speed: 2800 rpm • Power consumption: 0.5 kW • Max operating temperature: 35°C • Year of manufacture: not fully specified – likely 1980–1990 Motor: • Type: АИР71А2УЗ • Power: 0.75 kW • Speed: 2820 rpm • Voltage: 220/380 V • Protection class: IP54 • Manufactured in the USSR Advantages: • Compact and mobile design • Operational drive, ready for use • Suitable for workshops, paint shops, ventilation, burners

Condition: like new (used), Year of construction: 2012, functionality: fully functional, power: 50 kW (67.98 HP), type of input current: AC, pressure: 3 bar, input voltage: 230 V, nominal heat output: 50 kW (67.98 HP), heating capacity: 50 kW (67.98 HP), temperature: 95 °C, tank capacity: 175 l, operating pressure: 3 bar, Equipment: type plate available, We are offering this used Guntamatic BMK 50 log wood gasification boiler, year of manufacture 2012. It is suitable for logs up to 50 cm in length. Included are 2 insulated buffer tanks from Guntamatic (1,600 liters each), pipework with mixing valve, and a Kroll heating blower. Type: BMK 50 with automatic ignition Article number: 066-100 Serial number: 315972 Year of manufacture: 2012 Rated output: 20-50 kW Boiler class: 3 Electrical connection: 230 V Electrical current: 13 A Permissible operating pressure: 3 bar Maximum operating temperature: 95 °C Chimney draught: 0.2 mbar Water volume: 175 l Fuel: log wood 1/2 m, natural The system has only been in operation for 4 weeks. Includes 2 insulated buffer storage tanks (1,600 l each) and one Kroll blower. The unit is in excellent, as-new condition and can be inspected in operation. Disassembly and transport are at the buyer's expense. Dueleyf U R Hshccqlen If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. Dslhcexwhw Aocqlsun FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: Typ 360S, 4 Stationary Warm Air Heaters S / SC oil/gas from Knoll for sale. Purchased in 08/2022 from DEXES Berlin, Original: 12.499 € net/piece; Warranty until 7/2024. Dujlhcsppv Hbecqlen 2 pieces unused (11,000 € net/piece); 2 pieces were used only 3x: for this the price is further negotiable. Location 95506 Kastl; to be sold individually; Self-collection desirable. The warm air heater is already equipped with an oil burner / nozzle and room thermostat.

Condition: new, - NEW -without side panel and without baseKanuk® Originalwarm air stove- combustion chamber opening H x W (cm): 31 x 31- flue pipe connection:top / rear- efficiency (%): 83.9- log length (cm): 48- minimum flue draught (Pa): 16- ash box: no- BimSchV stage 2: yes- lignite briquette: no- CE mark: Yes- Total power (kW): 17,7- Room heating capacity (m³): 540- Viewing pane (cm): 24 x 14- Weight (kg): 153- Wood consumption (kg/h): 4,2- Flue gas throttle: No- Type 1 (self-closing door): Optional- Logs, wood briquettes: Yes- AT §15a B-VG standard: Yes- Outside air connection (mm): 80 mm- Dimensions H x W x D (cm): 80 / 58 / 95- Flue pipe connection (mm): 160- Door diameter (cm): 28- Flue gas temperature (°C): 232- Flue gas mass flow (g/s): 14.28- Combustion chamber H x W x D (cm): 40 x 44 x 49.5- Pane flushing: Yes- DIN EN number: 13240- Primary, secondary, tertiary air: Yes- LRV Switzerland: YesNo. 2100108 Dolhevyd Awoccqlsun

Condition: excellent (used), Year of construction: 2009, 1. WEISHAUPT WM-L20/1-A (excellent condition) - Output: 400-1400 kW - 34 - 118W kg/h - Year of manufacture: 2009 - Version: T 2. Weishaupt L7T Output: 300-1965 kW Year of manufacture: 2004 Version: D Djlhewgyifjccqleun

Condition: used, Year of construction: 1988, Robatherm RL 300 heater with Viessmann gas burner with valve, including 10 m stainless steel chimney with cleaning flaps. Year of manufacture: 12/88. For sale due to new acquisition. Fully functional. Duelhccox Uqc Eoqlen

Condition: excellent (used), Year of construction: 2000, picture frame stapler. Pneumatic control, efficient device. TYPE minigraf 44, Alfamachine company Duelevtzp Ushccqlon

Condition: new, Year of construction: 2024, functionality: fully functional, Multiple load banks are directly available from stock. Contact us today if you want to rent, lease, or buy a load bank. - Load bank 100 kW, 400Vac 50Hz, CosPhi 1 (Very compact, easy to carry in a service van) - Load bank 300 kW, 400Vac 50Hz, CosPhi 1 - Load bank 500 kW, 400Vac 50Hz, CosPhi 1 - Load bank 600 kW, 400Vac 50Hz, CosPhi 1 - Load bank 700 kW, 400Vac 50Hz, CosPhi 1 - Load bank 1000 kW, 400Vac 50Hz, CosPhi 1 - DC load bank with different voltages and capacities in stock, for example, 500VDC and 1000VDC, 1000 kW. Dslhccqjr Eyycelsun If you are looking for a solution to test at different voltages, such as 440V, 690V, or medium voltages like 10kV, do not hesitate to contact us. We also offer solutions for load banks with a variable power factor (CosPhi) and load banks with a power factor of 0,8 (load bank with a CosPhi 0,8). For example, we have inductive load banks, which we could combine with resistive and load banks, including both. Most of our load banks are equipped with a switch where you can choose between internal and external power for the fans. We offer both stationary and mobile load banks. For mobile purposes, we can add forklift pockets and a robust bracket. We are looking forward to your request.

Condition: new, Year of construction: 2024, functionality: fully functional, power: 1,800 kW (2,447.32 HP), Available directly from stock: 1700kW load bank for fixed installation. 400volt/50hz 6 steps of +/- 250kW 2 steps of +/- 125kW Other steps possible in consultation Duelhcsuubctjcqlen External control power supply 64Amp/400v/50hz Control via Modbus and HMI in the cabinet Equipped with its own circuit breaker in the casing. Can be extended with a motor. 20Ft container

Condition: like new (used), Year of construction: 2022, functionality: fully functional, We are selling a converted overseas shipping container equipped with a Herz Firematic 130 boiler system. The heating unit has a capacity of 130 kW and is connected to a Lauber heat exchanger. Additional doors have been installed in the heating container to facilitate maintenance and inspection, ensuring easy access to the system. The boiler is fired with wood pellets, and the integrated pellet bunker holds approximately 1.5 tons. Both the heating container and the Lauber unit must be dismantled prior to transport, but thanks to the container design, they can be easily loaded for relocation. The interior of the heating container is lined and treated with a special coating to prevent condensation drip formation inside. The Lauber unit installed is a Lauber Energy Utilization Center type L-ENZ 80+ (5.50 kW fan). Both machines are in nearly new condition with only minimal operational use. The total operating hours are currently 3,577, which equates to approximately 149 days of operation. Both units were manufactured at the end of 2022 and have been in use since around May 2023. What is this system suited for? It can be used for heating halls, buildings, construction sites, etc., as well as for drying bulk or natural materials such as wood, wood chips, horse manure, or any free-flowing bulk goods. Duolhceybbphscqlsn Please note: The drying boxes shown in some of the photos were part of our operational setup but are not included in this offer. For further details on dimensions, weight, and loading, please refer to the attached technical drawings.

Condition: used, Year of construction: 2012, functionality: unexamined, power: 1,500 kW (2,039.43 HP), nominal heat output: 3,000 kW (4,078.86 HP), heating capacity: 3,000 kW (4,078.86 HP), Selling complete boiler technology with 2 boilers ELBH with silo for biomas chips. Buyer have to arrange disassembly on site. Seller arrange crain, liftruck, full support on site + technical support. Duolhcjx Idkpscqlen