Used Sintering Furnace for sale (752)

Condition: good (used), debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 weight: 700 kg voltage: 400 V 3/N current consumption: 63 A PLC: Siemens S7 control cabinet: brand new - with an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - controllable cooling housing with autom. ball valve - automatic exhaust damper - automatic exhaust flap - monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor. -The furnaces themselves, particularly the brickwork, heating elements, and insulation, are in excellent condition with low or no working hours, making them practically like new. Nodpfxjmfn Rue Afaela

Year of construction: 2023, condition: new, El. heated two-track plate pusher furnace, make Riedhammer type: TP12,75/2x20/15-E-145 condition: as new total length of oven: 15.5 m furnace width: 3.6 m voltage type: 400/230V, 50 Hz connected load: 17 kVA tolerated voltage fluctuation: 10% tolerated frequency fluctuation: 1% PLC: SIEMENS/Comfort Panel TP1500-15 product structure (L x W x H) including push plate: 200 x 200x 101 mm Nlsdpfsp T T Hnsx Afaea Tmax debinding zone (4 segments): 650 °C Tmax pressure compensation zone (1 segment): 750 °C Tmax main combustion zone (6 segments): 1450 °C Tmax cooling module 1: 600 °C Tmax cooling module 2: 300 °C min. push time: 8 min max push time: 30 min number of conveyor plates: 266 pieces channel height: 105 mm

Year of construction: 2020, condition: like new (used), functionality: fully functional, Fully automatic sintering continuous furnace system Manufacturer: Sarnes Model: 600-G/CQI-9 Year of manufacture: 2020 (commissioned 2021) Programmable, with online diagnostic system. Fuel: natural gas Hydrogen + nitrogen (N2+H2) operation integrated The system has seen very little use and is in excellent condition. Offer / Quotation Date: 18.1.19 620 mm belt width, gas heated, N2/H2 operation, LED dewaxing zone, rapid cooling section (Pos 2), flameless discharge and ceramic muffle, Heating: low NOx RS Rekudrall burners, SiSiC burner tubes, installed heating capacity 320 kW in 8 zones, dual thermocouples, 100 mm usable height. LED 3 dewaxing zones ("low energy dewaxing" – utilization of chemically bound energy of the waxes and improved burnout conditions especially for heavy PM parts (>0.9 kg)). Dimensions: - Infeed table 2 m (target-actual belt speed compensation) - LED3 dewaxing zone: 1.5 m - Sintering zone length 7.5 m - Rapid cooling length 1 m - Convective cooling zone length 2 x 4 m - Flameless discharge with air shower 2 m Nledpfoxfcdysx Afasa - Outfeed table 2.7 m - Total system length 23.7 m - Width 2.3 m Connection ratings: Heating: installed power 320 kW Natural gas: 25 m³/h (80 mbar) N2: 45-65 m³/h (max. 80 mbar) H2: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temp.

Condition: like new (used), Chanber size: 280x180x500mm upper Nodpfx Ajd Sm Diofaola 280x130x450mm lower Max temperature: 700 C °

Condition: used, Year of construction: 2001, functionality: fully functional, MAPPI AU 1F 1S 900 1800 O.4 R.S.A. - Year 2001 Tempering furnace Working dimensions: 900x2000 mm Nedpfjy Hhi Tox Afaela Glass thickness: 4-19 mm Overall dimensions: Length: 10.50 m Width: 2.40 m Height: 2.40 m + Fan (2.40x2.30x2.40 m) Power: 107 kW

Condition: like new (used), Type: Farsoon FS HT1001P System configuration: build station, preheating station, cooling station Automated job changeover between two build cylinders Scanner from Chinese manufacturer, deviates from standard series Modifications and condition: - Overflow system upgraded with automatic draining - Laser protection windows renewed, approx. 200 operating hours - Heating elements replaced, approx. 500 operating hours - IR camera ports available (cameras not included) - Curtains installed in build chamber - Printer operating hours: less than 2,000 h Dimensions: 5,585 × 3,410 × 2,980 mm Weight: approx. 5,000 kg Maximum build size: 1,000 × 500 × 450 mm Build chamber throughput: up to 15 liters per hour Scanner: 2 × high-precision 3-axis galvo system Scan speed: up to 15.2 m/s Layer thickness: 0.06 – 0.3 mm Laser: 2 × CO₂ lasers, each 100 W Maximum chamber temperature: 220 °C Thermal control: multi-zone heating with intelligent temperature management Temperature regulation: real-time monitoring and optimization Operating system: 64-bit Windows 7 File format: STL Software functions: manual and automatic control, real-time parameter adjustment, 3D visualization and diagnostics Recommended materials: FS3300PA, FS3250MF, FS3400GF, FS-TPU Voltage: AC 380 V, 3 phase, N/PE Frequency: 50 to 60 Hz Total power: 25 kW Maximum current: 45 A Voltage fluctuation: ± 10% Protection: 3 × 50 A Preheating station: - No active preheating - Used for storing build cylinders for automated changeover - Roller blinds as protection from crushing and burning hazards Cooling station: - Nitrogen flooding with sealing - Surface temperature measurement of powder cake - Roller blinds as safety feature Cooling system (Deltatherm): - Compressor power: 1.32 kW - Pump power: 0.45 kW - Flow rate: approx. 18 l/min - Pump pressure: approx. 5.0 bar - Cooling medium: potable water - Connections: supply and return, 3/4" female thread - Tank volume: approx. 30 l - Air volume: approx. 2,250 m³/h Nledpfxey Hg S Te Afaoa - One axial fan - Fan power: 135 W - Dimensions: W 740 mm, D 740 mm, H 500 mm - Weight: approx. 110 kg Unpacking station (Powder Breakout Station): - Dimensions: 1,870 × 920 × 2,150 mm - Weight: approx. 1,200 kg - 200–240 V - Frequency: 50–60 Hz - Total power: 2 kW - Max current: 10 A Powder handling Schleiss RPTech: - Function: mixing, sieving, and conveying plastic powders - System creates a fully enclosed powder cycle - Components: powder mixing unit with mixer and sieving machine, containers for mixed powder, overflow powder, used powder, and fresh powder - Pumps for material transport between containers - Humidification module included - Vibrating motor for sieve not included Powder handling mixing and sieving system technical data: - Dimensions: 1,800 × 815 × up to 2,600 mm height - Weight: approx. 240 kg - Temperature range: 0 – 40 °C - Mixing throughput: approx. 10 l in 8 min - Sieving throughput: 5 kg in 3 min - Voltage: 230 V at 50 Hz, 16 A protection - Mixer power: 210 W - Extraction power: 2,200 W - Air requirement: approx. 100–140 l/min - Operating pressure: 5–6 bar Condition: used Scope of delivery: (see picture) (Technical data subject to change and error!) Further questions gladly answered by phone.

Condition: used, Year of construction: 2014, GLASTON TAMGLASS RC200 (Type 2136) - Year 2014 Tempering Furnace Nlodpfx Afoy Drf Tsaea Max glass size: 100 x 480 mm Installed power: - Blowers: 250 kW - Heating and drives: 421 kW - Average process power: 263 kW Overall dimensions: 18,000 x 6,000 x 3,100 mm Loading area: 2,100 x 3,600 mm Blower room: 6,000 x 5,000 x 4,000 mm

Condition: ready for operation (used), Heraeus MR 170 E Muffle Furnace, Annealing Furnace, Oven 1000°C Internal dimensions: 295mm x 175mm x 95mm (D x W x H) Nljdsynhm Hepfx Afaja You are welcome to arrange a viewing. We can organize affordable shipping for you upon request! You will receive a proper invoice. For foreign customers, a net invoice can also be issued provided a valid VAT ID is supplied. Sale subject to prior sale. Visit our shop to see more of our offers. The listed company names and trademarks are property of their respective owners and are used solely for identification and description of the products. Deviations from the technical data and errors in the article description may occur and are subject to change.

Condition: like new (used), Year of construction: 2017, machine/vehicle number: 400220/659/2017, functionality: fully functional, temperature: 650 °C, inner dimension length: 600 mm, inner dimension width: 400 mm, inner dimension height: 400 mm, overall weight: 2,500 kg, Equipment: CE marking, documentation/manual, Warwick dry nitriding furnace, in very good condition, like new. Nledpfx Afjy Eg U Eeaja

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Njdpfx Ajuhmacofaola Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Electrical data: 400 V, Temperature controller adjustable up to 1100°C +temperature controller in the electrical box

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: SN49983, functionality: fully functional, Chamber Furnace, Very Good Condition. 12 Months Warranty - Max temperature 1300°C - Internal dimensions (W x D x H): 400 x 400 x 400 mm Nsdpfx Afex U Ekdoasla - Capacity: 60 liters - Separate main switch - Heating on 5 sides - Inlet and exhaust air with dampers, electrically operated via Belimo actuators - Intake fan controlled by frequency converter via controller - JUMO control system (switchable to other languages!) - Additional type S trailing element for external data recording - Documentation - Net weight: 250 kg - Power consumption: 18 kW - Current draw: 26 Amps - Connection voltage: 3/N/PE 400VAC - Connection variant: prepared for fixed connection, 32A plug - Documentation, CE declaration - Electrically tested and supplied with current DGUV test protocol Inspection by appointment. Furnace, ovens, annealing furnace, industrial furnace, chamber furnace, kiln, baking oven, tempering oven, laboratory furnace, hardening furnace

Year of construction: 1985, condition: used, Hardening furnace Heraeus Type KM 260 width 250 mm height 150 mm depth 500 mm Temperature up to 1150 c Nodpfx Afogtxuqeasla

Condition: good (used), Transitube mixing system for mixing laser sintering material, including conveying via screw conveyor. Nlodeyzamgepfx Afaja

Year of construction: 1999, condition: good (used), Chamber hardening furnace K 1150-2 Rated temperature: 1150 °C, 5.0 kW 400 Volt Usable space: 225 mm width, 215 mm height, 300 mm depth External dimensions: 525 x 595 x 650 mm Heating-up time: 2.5 h Njdpfxsxwqhkj Afajla 75 kg With base frame

Condition: used, El. heated pit furnace, make Borel with air circulator type: 11.85 temperature: max. 550°C connected load: 5 kW clear ø: 300 mm clear height: approx. 570 mm Nlodpevv Sw Iefx Afaja without control cabinet

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, power: 137 kW (186.27 HP), Conveyor belt continuous furnace, electrically heated, type DLE 600/200/3000 G for soldering or annealing under exogas atmosphere. - Heating power: 137 kW - Conveyor belt width: 600 mm - Clear height above belt: 200 mm - Heated length: 3000 mm - Net throughput: 254 kg/h Nodpfoy Ddtiox Afajla - Max. temperature: 1150 °C

Condition: refurbished (used), Heating: electric Air circulator: 1 Temperature: 400°C Nljdpfx Afetukp Eoaja Internal dimensions: (approx.) Width: 700 mm Height: 450 mm X Depth: 1300 mm X Can be increased to ~ 700 mm clear height by changing the furnace floor. External dimensions: (approx.) Width: 2200 mm Height: 2700 mm Depth: 2500 mm Heating output at 400 V = approx. 15 Y /45 Δ KW + approx. 2.2 kW for heating gas circulator + approx. 1.1 kW for door lift (The furnace is originally designed for 500 V)

Condition: used, functionality: fully functional, Year of construction: 2009, power: 2,000 kW (2,719.24 HP), input voltage: 380 V, Operated with gas, 16 x impulse burners max. batch weight: 50t usable furnace dimensions: 6m x 3m x 2m must be dismantled and collected Nsdpfx Ajyr Sa Sofasla 450 to 1050 degrees process controller SE 504

Condition: used, Laser Sintering System Vanguard si2 SLS System, upgraded in 2017 to modern standards Machine Dimensions: Width: approx. 157 cm Depth: approx. 119 cm Height: approx. 198 cm Minimum installation space: 4.57 m × 3.66 m × 3.05 m Door height: 2.13 – 2.44 m Floor: Level (max. 25 mm deviation) 50 psf load capacity Non-vibrating Untiled / no carpet Approx. 1,150 kg Process station: 240 VAC ±5 % 3-phase 12.5 kVA Dedicated circuit 4-wire cable Ceiling connection For different voltages: Transformer required: 208→240 V 400→240 V 480→240 V Upgrade Details: UniHeat V5 / 10-zone build chamber heating Layer thickness adjustable via software, all listed materials are parameterized at 0.10mm 70-watt CO2 laser Fully digital, 3-axis high-speed scanning system with "XStream BDS" scanner control system with scan speeds of 6–12 m/s Build rate at medium packing density: 10–15 mm/h 2 x 20kg powder reservoirs integrated in the machine Including unpacking container and manual unpacking station (see pictures in the attachment) Including machine and software documentation in digital form Last maintenance August 2024 (Laser window + ATC sensor new in 2024) Including 2 x nitrogen generators and 1 x cooler included Nljdpfx Aeyl Tv Iofaoa Operating hours: unknown / average use 2x per week The following materials are qualified for a 0.10mm layer thickness: - PA12 - PA2200 / EOS - TPU - natural / Stratasys - PP - natural / Lehmann & Voss - PA12 - PA2210FR / EOS - PA11 - black / AM Polymers (Support is secured despite the closure of LSS, as the service technicians have been taken over by a Belgian company) Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and error!) For further questions, please feel free to contact us by phone.

Year of construction: 2023, condition: new, functionality: fully functional, We offer this new JINGLASS GLASS TEMPERING FURNACE, year of construction 2023. Manufacturer: JINGLASS Year of Manufacture: 2023 Condition: new Category ID: 681 Type: GLASS TEMPERING FURNACE PREMIER GLASS WORKS SIZE : 3660mm x 2440mm THICKNESS : 3.5mm TO 19mm GLASS TYPE: WITH CONVECTION LOW - E GLASS HEATING : 700KW QUENCHING: BLOWER 1 (FLAT 220KW) BLOWER 2 (BEND250KW) BLOWER 3 (FOR COOLING 55KW) OTHERS: 30 KW POWER: 415KW Nlsdpfsyz Hzqox Afaea OTHER MACHINE PANELS WITH VFD AND BACK UPS FOR THE SAME. COMPRESSOR: 30HP SCREW COMPRESSOR WITH AIR DRYER AND 1000LTR TANK. CABLE: 4 CORE ARMOURED ALUMINUM CABLES FOR THE MACHINE. PANEL: LT PANEL VCB: ABB MADE (2020) WE HAVE THE MS STRUCTURE FOR PLACING THE BLOWERS AT THE TOP WHICH IS INCLUDED. The machine packing charges will be extra. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New machine, available immediately, 12 months warranty - Internal dimensions (WxLxH): 1250 x 4000 x 1450 mm - External dimensions (WxLxH): 1900 x 4900 x 2500 mm - Power consumption: 240 kW Nedey Avmljpfx Afaela - Current consumption: 350 Amps - Maximum temperature Tmax: 1300°C - Furnace weight approx.: 6000 kg - Control system: JUMO IMAGO 500 Software packages (OPCA & PCC) - Screen recorder: JUMO Logoscreen 601 - Includes feedthrough hole and 6 additional slots, logging of type K customer thermocouples - Multi-zone version (3 zones) - Control cabinet with solid-state relays - Control cabinet air conditioning - Automatic supply and exhaust air dampers - Regulated cooling system (incl. frequency inverter, controlled via control system) - Electrically driven bogie hearth - Max. load capacity 3.5 t - Swing door - Documentation, CE declaration We are pleased to offer setup, commissioning, and employee training services. Please contact us! We supply new and used industrial furnaces. Inspection in our warehouse is possible upon request! Bogie hearth furnace, bogie hearth oven, furnaces, annealing furnace, kiln, hardening furnace, heat treatment oven, furnace, tempering furnace, curing oven, drying oven, industrial furnace

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Equipment: CE marking, type plate available, Induction furnace for heating steel with dimensions up to 550mm in length, 100mm in width, and 20mm in thickness. The furnace is connected to a feeder for small rods with dimensions from 10x10 to 22x22 and a length of up to 300 mm. The hopper feeder sorts the parts and automatically loads the inductor with consecutive pieces for heating. The feeder is ideal for producing large nails, screws, etc. Its operation can be seen in a YouTube video. The efficiency is very high. For small elements, heated parts at 1100 degrees are retrieved every 6 seconds. We have two inductors for the furnace to heat materials with thicknesses up to 20mm and up to 16mm. It is possible to modify the furnace to suit your needs. Replacing the inductor with other sizes costs approximately 3000 EUR. The machine is very versatile in terms of the sizes of heated products. Nljdsw Hqldjpfx Afaja It is possible to heat flat bars, round rods, or square rods.

Year of construction: 1984, condition: used, max. temperature 1.050 Grad size of opening 380 x 230 mm depth of chamber 680 mm volume 60 L voltage 380 V total power requirement 19,0 kW weight of the machine ca. 540 kg dimensions of the machine ca. 1,15 x 1,35 x 1,65 m Nodpei Db Dbefx Afaela - Serial-No.: 13817

Condition: reconditioned (used), Year of construction: 2017, machine/vehicle number: SN48357, functionality: fully functional, Chamber furnace with exhaust hood, in very good condition. 12 months warranty. - Max temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Inlet and exhaust air with dampers, electrically driven by Belimo actuators - Intake air fan controlled by frequency inverter via regulator - Stainless steel exhaust hood - Bentrup 507 control system, thyristor controller - Controller language: German only, cannot be switched to other languages! - Additional slip ring element type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current: 26 Amps - Supply voltage: 3/N/PE 400 VAC - Connection type: prepared for fixed installation, 32 A plug - Documentation and CE declaration - Electrically tested with current DGUV test protocol Viewing by appointment. Nledpfjtbq Eqjx Afaea Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, curing oven, tempering furnace, laboratory furnace, hardening furnace.

Condition: good (used), Year of construction: 2000, Matador MD 151 Bakery Oven - used - year of manufacture approx. 2000 - surface area 15 sqm - manual control - 5 chambers, each 1.8 x 1.6 m - hood with fan - machine from production - requires inspection/overhaul - overall technical condition good - collection from warehouse/shipping possible - price on request Nlodpfx Aey Alhljfaoa