Used Wood Boiler for sale (7,173)

Condition: used, temperature: 95 °C, input voltage: 400 V, operating pressure: 3 bar, Fröling Turbomatic TMC 110 used wood chip / pellet biomass boiler, supplied with screw conveyor and spring-arm fuel extraction system. Nominal heat output: 110 kW. Water capacity: 320 litres. Maximum operating pressure: 3 bar. Maximum temperature: 95 °C. Electrical connection: 400 V / 50 Hz. Cjds Afbqvopfx Aiieri Net price: EUR 10,000 including the advertised feeding and fuel extraction equipment. Exact delivery scope and configuration by agreement. Inspection by appointment in Mosonmagyaróvár, Hungary. Loading and transport by arrangement. Installation and commissioning are the buyer’s responsibility.

Condition: used, temperature: 95 °C, input voltage: 400 V, operating pressure: 3 bar, Fröling Turbomatic TMC 48 used wood chip and pellet boiler with Lambdatronic control. Suitable for larger properties, workshops and commercial buildings. Nominal heat output: 48 kW. Water capacity: 185 litres. Maximum operating pressure: 3 bar. Maximum temperature: 95 °C. Codpj Afbq Aofx Aiisri Electrical connection: 400 V / 50 Hz, 12 A, 430 W. Net price: EUR 6,000. Exact scope of boiler, feeding equipment and accessories by agreement. Inspection by appointment in Mosonmagyaróvár, Hungary. Loading and transport by arrangement. Installation and commissioning are the buyer’s responsibility.

Condition: used, temperature: 95 °C, input voltage: 400 V, operating pressure: 3 bar, Fröling Turbomatic TMC 35 used wood chip and pellet boiler, offered with feeding and fuel extraction system. Nominal heat output: 35 kW. Output range: 10.5–35 kW. Water capacity: 114 litres. Maximum operating pressure: 3 bar. Maximum temperature: 95 °C. Electrical connection: 400 V / 50 Hz. Lambda-controlled combustion and automatic heat exchanger cleaning. Crjdps Afbq Nofx Aiioi Net price: EUR 8,000 including the advertised feeding and extraction system. Exact delivery scope and availability by agreement. Inspection by appointment in Mosonmagyaróvár, Hungary. Loading and transport by arrangement. Installation and commissioning are the buyer’s responsibility.

Condition: excellent (used), KWB Powerfire TDS 150 – automatic biomass boiler Cjdpfozqnp Sjx Aiiori Used Austrian wood chip and pellet boiler with modulating output from 45 to 150 kW, suitable for commercial, agricultural and industrial heating. Key features: - Moving grate combustion - Lambda-controlled combustion and cyclone combustion chamber - Automatic heat exchanger cleaning - Automatic ash extraction - Wood chips G30/G50 or pellets Factory specifications: - Nominal output: 150 kW - Minimum output: 45 kW - Maximum operating pressure: 3.5 bar - Maximum supply temperature: 90 degrees C - Water capacity: 300 litres - Efficiency with wood chips: 90.4 percent at nominal load In stock. Inspection by appointment. Please confirm the exact scope of delivery and accessories before purchase. Transport and installation by separate arrangement. We also offer wood chip boilers, pellet boilers, wood gasification boilers, feeders, pumps, buffer tanks and heating accessories.

Condition: used, functionality: fully functional, overall weight: 4,000 kg, smoke pipe connection diameter: 200 mm, nominal heat output: 300 kW (407.89 HP), space requirement length: 4,040 mm, space requirement height: 2,250 mm, space requirement width: 5,150 mm, temperature: 95 °C, total height: 2,250 mm, total length: 3,450 mm, total width: 1,250 mm, operating pressure: 5 bar, Equipment: documentation/manual, Gilles HPKI-K 300 industrial wood chip boiler Used Austrian biomass boiler for industrial, agricultural and commercial heating. Technical data: - Nominal output: 300 kW (W40) - Output range: 90.2 to 300 kW - Fuel: wood chips G50 / G100 - Water capacity: 1100 litres - Maximum operating pressure: 5 bar - Maximum temperature: 95 degrees C - Supply and return: DN 80 - Length: 3450 mm - Width: 1250 mm - Height: 2250 mm - Weight: approximately 4000 kg - Flue connection: 200 mm Operating manuals and technical documentation available. Exact scope of delivery, availability and collection by arrangement. Inspection by appointment. A wide selection of boilers, feeders, pumps, buffer tanks and heating accessories is available. Transport and installation are arranged separately. Csdpfozwkrpex Aiijri

Condition: used, operating hours: 30,374 h, functionality: fully functional, machine/vehicle number: 000-0059085/3, overall weight: 997 kg, volume flow: 209 m³/h, power: 113.9 kW (154.86 HP), heating capacity: 99 kW (134.60 HP), smoke pipe connection diameter: 200 mm, nominal heat output: 113.9 kW (154.86 HP), space requirement length: 3,140 mm, space requirement height: 2,400 mm, space requirement width: 2,170 mm, temperature: 90 °C, total height: 2,310 mm, total length: 2,040 mm, total width: 860 mm, type of input current: three-phase, exhaust gas temperature (max.): 160 °C, input voltage: 400 V, negative pressure: 15 Pa, nominal power: 99 kW (134.60 HP), tank capacity: 10 l, input current: 13 A, operating pressure: 3 bar, Equipment: documentation/manual, hot water, KWB UNIT USV100 / Multifire – 99 kW biomass boiler Used Austrian boiler with KWB Comfort 3 controls, output modulation, lambda and negative-pressure control, automatic heat exchanger cleaning and ash extraction. Technical data: - Nominal heat output: 99 kW - Minimum output: 27.6 kW - Fuel input: 113.9 kW - Water capacity: 167 litres - Maximum operating pressure: 3.5 bar - Maximum temperature: 90 degrees C - Weight: approximately 997 kg - Flue connection: 200 mm - Operating hours: 30374 h Data plate specifies 6 mm wood pellets. Wood chip operation depends on the installed extraction and conveying equipment. Exact equipment and scope of delivery by arrangement. Csdpjzhh Iiefx Aiijri Located in Mosonmagyaróvár, Hungary. Inspection by appointment. Transport, installation and commissioning by the buyer.

Condition: good (used), Year of construction: 2013, Wood chip boiler for steam up to 150 degrees or for water only with hydraulic feed system Credpfx Asy Dfd Neiiji maximum thermal output up to 850 kW suitable for dry material

Condition: ready for operation (used), Year of construction: 2009, A Nolting moving grate wood-fired boiler system is offered. Max. boiler output: 1125kW, nominal heat output: 900kW/1125kW, max. fuel moisture: W50/M30, optimum efficiency range: >90%, flue gas connection: DN250. Machine weight: approx. 4800kg. Inspection possible by arrangement. Crjdszt Sk Espfx Aiisi

Condition: used, Year of construction: 2010, functionality: fully functional, - Manufacturer: GEMOS CZ, spol. s r.o. - Boiler type: gasification Crsdpfx Aoxa Evbsiisi - Output: 110 kW - Year of manufacture: 2010 - In operation since: 2010 - Fuel feeding: automatic, with screw conveyor

Condition: like new (used), Year of construction: 2005, functionality: fully functional, power: 18.5 kW (25.15 HP), fuel type: electric, LBH RHZM 750 wood shedder. Csdpfx As Ah Dqujiiori The machine is in excellent condition! As shown in the photos. Can be tested on-site. We will assist with loading; transport is the buyer's responsibility.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 8,060 h, functionality: fully functional, overall weight: 1,750 kg, total width: 2,300 mm, total height: 2,400 mm, total length: 7,500 mm, input voltage: 400 V, year of last overhaul: 2026, transport width: 2,350 mm, Equipment: documentation/manual, Year of manufacture: 2017 – Engine: 15 kW Cutting dimensions: – Maximum log diameter: 95 cm – Clear distance between rollers: 73 cm – Maximum cutting width (plank): 64 cm – Maximum cutting height above the blade: 39 cm – Maximum cutting length: 6.2 m The sawmill is equipped with a complete hydraulic system: – Hydraulic leveling system – Side stops – Material press – Toothed rotator – 2 loading arms Cutting head equipment: – Automatic device for setting the cutting thickness – Electric adjustment of the head height: up/down – Electric forward/backward feed of the head, with continuously adjustable speed Cjdpfxe Aavnfs Aiiori – Electric blade guide arm – Hydraulic blade tensioning system with air cushion – Bark remover

Condition: good (used), functionality: fully functional, power: 398 kW (541.13 HP), gearing type: automatic, color: green, machine/vehicle number: 100114331.Y, PRICE IS FOR 2 UNITS - CAN BE SOLD SEPARATELY! Froling Biomass Boiler with CORDIVARI Buffer Tank - Complete Commercial Heating Systems Offered for sale is a high-capacity biomass heating system comprising a Froling TX 200 biomass boiler and CORDIVARI thermal buffer tank (puffer). This is a commercial-grade installation, designed for high-demand environments such as agricultural operations, industrial units, estates, and large-scale residential projects. The system has been installed and powered on for testing. Csdpfxeyw I Hms Aiisri Boiler Specification (Froling TX 200): • Boiler class: EN 303-5 Class 5 (high-efficiency, low-emissions standard) • Nominal heat output: 199 kW • Heat output range: 59 – 199 kW • Nominal fuel input rate: 214 kW • Permitted fuels (EN 14961): Wood pellets (Part 2: D06, Class A1) Wood chips (Part 4: P16A – P45A, Class A2) • Max. operating temperature: 90°C • Max. operating pressure: 3 bar • Water content (boiler): 570 litres • Electrical connection: 400V / 50Hz / C35A • Power consumption: 285 – 650 W • Production number: 100114331.Y The Froling TX 200 is a premium biomass boiler known for high efficiency, automated operation, and reliability in continuous-use environments. Paired with a CORDIVARI thermal buffer tank, the system delivers improved heat management, reduced cycling, and optimal energy utilisation. The system is also equipped with an automatic biomass feeding system from upper storage containers, ensuring consistent fuel delivery and minimal manual input. Important: The biomass system has not been used in full operation - it has only been tested. Operating time can be verified via the built-in digital counters, which display the total minutes the system has run. This combination provides a stable and efficient renewable heating solution, ideal for buyers looking to reduce long-term energy costs while meeting environmental targets.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 2,150 kg, Used Hamech Biomass Boiler System for Sale Reliable Hamech biomass boiler system consisting of a KWH 300 heat-exchanger section and AZSD 250 combustion unit. Designed for efficient combustion of wood chips, sawdust, and wood shavings with fuel moisture up to 40%. The package includes: KWH 300 heat exchanger AZSD 250 combustion chamber with static grate SE 5 control system DN 400 chimney (8 m) Fuel discharge system Fire-extinguishing equipment 27 m³ fuel bunker Suitable for wood-processing plants, biomass heating facilities, and industrial applications requiring a reliable hot-water heat source. Crsdps Ah Swdsfx Aiiei Condition: Used Manufacturer: Hamech Availability: On request For further technical information, inspection, and price offer, please contact us.

Condition: used, Year of construction: 2021, Reliable ELBH TSP-25 NT hot-water biomass boiler designed for efficient combustion of wood fuel. Manufactured in 2021, the boiler is suitable for sawmills, timber drying plants, biomass heating systems, and industrial facilities requiring a dependable renewable heat source. Key Specifications Crjdpfx Ais Ah Sx Rjisi Manufacturer: ELBH-CZ Model: TSP-25 NT Thermal output: 266 kW Water volume: 750 l Heating surface: 26 m² Maximum operating temperature: 95 °C Operating pressure: 0.3 MPa Maximum allowable pressure: 0.5 MPa Fuel: Wood biomass Electrical power consumption: 3.5 kW Dimensions: 2315 × 1800 × 1150 mm Weight: 5,000 kg Year of manufacture: 2021 Suitable as a heat source for timber drying chambers, industrial heating systems, wood-processing plants, and biomass energy applications.

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 3GBG252051-ADK,002,009, The machine is a wood gasifier that converts the gas from wood chips into electricity that is generated from a 6-cylinder GM engine. The machine was acquired as part of the property that includes a boutique hotel. It was subsequently shut down when we did not have the capacity to operate it and the hotel. We expected to once again redeploy it but the base business keeps us too busy to add the operation and maintenance required of the machine. Codpfx Aie Adl Hrjijri

Condition: used, Year of construction: 2017, functionality: unexamined, machine/vehicle number: VAN18-0015, power: 995 kW (1,352.82 HP), EX Diageo 2017 BINDER / HERZ Biomass-Fired Steam Boiler Plant – Complete System Boiler capacity: 995 kW, as stated on the manufacturer’s nameplate. Complete industrial biomass steam generation plant available from Rosemaund Farm Distillery in Herefordshire, UK. Installed and commissioned in 2017 and formerly operated as part of the Chase Distillery site during its period of Diageo ownership. The plant is now surplus to requirements following a change in production strategy. The installation is offered substantially complete and includes: • BINDER / HERZ biomass-fired steam boiler plant • Hydraulic walking-floor fuel hopper • Screw and inclined fuel conveyors / auger stoking system • Economiser • Flue gas and ash collection equipment Csdpoz Ik Aajfx Aiijri • Ash removal conveyors and collection system • HERZ / BBSM plant control panel • Flue, fans and associated fittings • BYWORTH insulated steam accumulator, approx. 23m³ • Water treatment equipment • Steam blowdown vessel • Condensate recovery unit • Hotwell and associated pipework/platforms Boiler reference: VAN18-0015 Year: 2017 Steam accumulator: BYWORTH M847, 2018 The plant remains installed and can be inspected by appointment. An independent engineering inspection and functional test can be made available to serious purchasers. Sale basis: Ex-works, Herefordshire, United Kingdom. Purchaser to arrange dismantling, loading and transport. Full technical information, photographs and further documentation available on request.

Condition: as good as new (ex-display), Year of construction: 2023, Wood-Mizer MP280 – Four-sided planer / moulder • Year of manufacture: 2023 • Condition: Showroom machine, exhibited at trade fairs and exhibitions • Four-sided planing: maximum width 250 mm; standard working height 10–50 mm, up to 100 mm optional • Two-sided planing: width 300 mm; working height 10–230 mm • Single-sided planing: maximum width 410 mm; maximum height 230 mm • Cutter motors: top 4 kW; bottom 3 kW; side motors 2 × 3 kW • Feed speed: 3–15 m/min; feed motor 0.37 kW • Cutter speed: 6,000 rpm at 50 Hz • Side spindle diameter: 30 mm; maximum cutter head diameter: 140 mm • Dust extraction outlets: 1 × Ø125 mm and 3 × Ø100 mm • Central control panel with individual motor operation Codpfe Af E Ursx Aiieri Machine location: Romania.

Condition: excellent (used), Year of construction: 2024, Wood-Mizer CNC5003 CNC Machining Center – practically unused Key data • Category: CNC machining centers / CNC routers for wood (nesting) • Year of manufacture: [2024] • Condition: practically unused, demo / showroom unit • Location: [KOŁO], Poland • Availability: 2 units in identical specification — discount available if both are taken Crodpfxsyr Dawe Aiioi • Sold directly by the manufacturer, no intermediaries Description An industrial-grade CNC machining center at a mid-range machine price. Why this machine is worth considering • Only premium, branded components — no generic parts: FANUC, HSD, HIWIN, ATLANTA, FESTO, BECKER. Each of these components is serviceable and supported worldwide, independently of us as the machine builder. • FANUC control — the world's most widely used CNC platform, standard ISO G/M code, ready to interface with any CAM system. Support, training, and service are available from any authorized FANUC partner or CNC integrator. • Gantry design with dual drive — high stability and accuracy, high-resolution digital servos, low vibration. • 3095 × 1535 mm working area accommodates a full 3050 × 1530 mm panel — an entire sheet is machined in one setup, with no pre-cutting and no repositioning. • 6-zone vacuum nesting table with 216 vacuum points — exceptional flexibility in work-holding: panels, irregular parts, and porous materials. • The machine is on-site and available for inspection and a test cut before purchase, along with the available technical documentation. Technical data Specification Value Actual working area X / Y 3095 × 1535 mm (max. raster table area) Z-axis travel 200 mm Rapid traverse X / Y / Z 60 / 30 / 15 m/min Spindle HSD 11 kW, HSK63F, 24,000 rpm, inverter-driven, ceramic bearings Tool changer ATC — 12-position carousel on the gantry, service access hatch Drives and guideways ball screw, linear guides, and carriages by HIWIN; rack and pinion by ATLANTA Control FANUC, ISO G/M code, PC and CAM interface, built-in server Table grey extruded polypropylene raster table; 6 zones × 36 points = 216 individual vacuum points, each zone with its own valve Vacuum pump BECKER, 126 m³/h, 4 / 5.5 kW, max. vacuum 0.9 bar Pneumatics FESTO Chip extraction articulated extraction hood Control panel movable, on wheels — access from 3 sides of the table; local operation or via network Frame size (footprint) 1570 × 4150 mm Total length / width / height 4460 / 3000 / 2400 mm Materials: wood, sheet materials, plastics, foam, composites, light alloys (aluminum). Terms of sale — stated openly • Sold as-is, without a manufacturer's warranty and without service support from our side — our CNC project has been discontinued. This is the only reason for this price. • Service and wear parts are available directly from the component manufacturers (FANUC, HSD, HIWIN, BECKER, FESTO) and from independent CNC integrators. • Inspection and a test run on-site are welcome — bring your own material and file. • Net price, EXW [KOŁO]. Loading is our responsibility; transport and unloading are the buyer's responsibility. Intra-community supply (0% VAT) for EU buyers with a valid VAT ID. • We can connect you with companies offering commissioning and operator training (third-party service, priced separately).

Condition: used, Year of construction: 2024, operating hours: 350 h, functionality: fully functional, machine/vehicle number: LT40MG38SDHP5-2.6WSWR, cutting length (max.): 6,100 mm, total length: 8,200 mm, overall weight: 2,600 kg, height adjustment type: electric, cutting width (max.): 820 mm, Equipment: chassis, We are offering this used Wood-Mizer LT40 wide complete sawmill (mobile), manufactured in 2024. Cutting length: 6.1 m Cutting width (plank): 82 cm Maximum processable log diameter: 100 cm Year of manufacture: 02/2024, approximately 350 hours of operation. Powered by a 38 hp gasoline engine. SW10 cutting thickness calculator. Electric saw head (forward, backward, up, down). Electric clutch for the engine. Hydraulic package 5 (almost fully equipped). Log lifter, 2 pull-down clamps, 2 balancing rollers (one powered), 3 vertical stops, 1 manual vertical stop for short logs, log turner, central log clamp. Laser. Road approval. Unfortunately, the rear bumper is slightly bent, but it is fully functional. Crsdpfszagkzex Aiiji In addition, I have the following items available: Approximately 60 saw blades. Protective cover. Almost new CookiMizer. Log holder for short and thin logs from Hesener. And other accessories, such as spare blade guide wheels, etc.

Condition: used, -Fuel delivery system -Biomass combustion system -Hot water boiler -Ash removal system -Flue gases primary cleaning system -Stairs and service platforms -Draft fan - Automatic control system -Chimney -Circulation system and water treatment Main parameters and guarantee value are calculated according to fuel parameters: -Moisture 60-65 % -Ash till 8 % - Calorific value 7990 kJ/kg and 1907 kcal/kg Main parameters of the furnace 6000 K: - Maximal designed thermal output – 6.5 Mw - Maximum continuous rate – 6 MW - Furnace regulation range 20% - 100% - Volume of furnace- 31.6 m3 - Volume of combustion chamber – 24m3 - Grates area 12 m2 - Grates designed thermal load – 500 Kw/m2 - Combustion chamber designed thermal load – 250 Kw/m3 - Maximum temperature in the combustion chamber - 900°C The following kinds of biomass are accepted for combustion in the furnace: - wood chips – 100% - forest wood residues- 100% - saw dust – 100% (G15) - chunk peat – 100% Cedpfx Aijwfpwpsijri - bark – 100%

Condition: as good as new (ex-display), Year of construction: 2019, Wood-Mizer MS300 – Sliding table circular saw • Condition: Demo machine, exhibited at trade shows and exhibitions • Cutting height: 103 mm • Distance between saw blade and fence: 800 mm • Sliding table: 1,400 × 350 mm • Sliding travel: 1,235 mm • Work table length: 900 mm; overall width: 750 mm • Saw blade diameter: 315 mm • Arbor diameter: 30 mm Crsdpfx Ae Af Hdheiiji • Spindle speed: 4,400 rpm • Blade tilt: 0–45° • Motor options listed in the model specifications: 3 kW three-phase or 2.2 kW single-phase

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 30111, functionality: fully functional, operating hours: 123 h, The OekoRona M is an electrostatic precipitator that significantly reduces fine dust emissions from automatic wood-fired heating systems with outputs between 300 kW and 3 MW. The precipitator has a modular design and can be installed in both new and existing systems. The mechanical cleaning system enables fully automatic operation of the precipitator and reduces maintenance to a minimum. OekoRona M facts: - for automatically fed wood-fired heating systems up to 3 MW - automatic, mechanical cleaning - tested separation efficiency - low operating costs - retrofittable - suitable for overpressure and underpressure operation - bypass - low energy consumption - various designs - flexible ash removal - operating optimization through remote maintenance Csdpe Aba Rgefx Aiijri Manufacturer: OekoSolve AG Type: OekoRona M Identification number: ORM-30111 Specified electrical power consumption: 1.65 kW Temperature class: T250 (according to the specified marking) Operating principle The flue gas flows through the tubes of the filter system, which are equipped with ionization electrodes. The high voltage electrically charges the fine dust particles, which then deposit on the inner surfaces of the separation tubes. The mechanical cleaning system automatically removes the deposited dust particles, which then fall into a lower collection container. An automatic discharge screw can transport the dust to an external collection container. Key technical features Feature Description Application area Automatic biomass-fired heating systems Boiler output range Approx. 300 kW to 3 MW for the product series Dust separation Electrostatic Cleaning Automatic mechanical cleaning Flue gas temperature Maximum 250 °C Operating mode Suitable for overpressure and underpressure systems Bypass Integrated bypass Operation Touchscreen control Dust removal Collection container; screw discharge, depending on the design or optional Condensation protection Electrical or hydraulic heating, depending on the design Installation After the boiler in the boiler room

Condition: excellent (used), Year of construction: 2002, Selling an AHENA boiler. In very good working condition, operates on sawdust and wood chips. Cjdpoxf Nyhefx Aiiori

Condition: as good as new (ex-display), Year of construction: 2024, warranty duration: 12 months,  Control panel  5 cutting heads  The angle of the 5th head can be adjusted within a range of 270 degrees  5 feed and pressure rollers  Adjustable feed speed: 3 – 15 m/min  4 dust extraction points  Height indicator allowing for precise adjustment of the table and machine height  Width indicator allowing for precise adjustment of the timber dimensions  Infeed table with a length of 1.9 m and outfeed table with a length of 1 m Technical data CAPACITY  Four-sided planing • Maximum width 350 mm • Height range 10 - 160 mm  Two-sided planing • Planing width 410 mm • Height range 10 - 230 mm  Single-sided planing • Maximum width 510 mm • Height 230 mm TOP HEAD • Diameter 88 mm • Width 510 mm • Motor power 5.5 kW (7.5 HP) • Rotational speed 6000 rpm • Max. planing depth 8 mm • Max. profiling depth 20 mm BOTTOM HEAD • Diameter 72 mm • Width 410 mm • Motor power 4 kW (5.5 HP) • Rotational speed 6000 rpm • Max. planing depth 8 mm • Max. profiling depth 10 mm (15 mm drill) Codpfxezqzy Re Aiiori SIDE HEADS • Spindle diameter 30 mm • Max. Knife height 160 mm • Max. Diameter 160 mm • Motor power 3 kW (4 HP) • Rotational speed 6000 rpm • Max. planing depth 30 mm ADDITIONAL HEAD • Spindle diameter 30 mm • Max. Knife height 130 mm • Max. Diameter 200 mm • Motor power 3 kW (4 HP) • Rotational speed 3000, 6000, 9000 rpm • Tilt angle 270 degrees

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Superheated water boiler at 152°C, 1 Gcal/h, automatic feed, year of manufacture 2014 – manufacturer Sceat Italia - Heat output: 1,000,000 kcal/h - Pressure: 4 bar - Superheated water temperature: 152°C - Equipped with control thermostat, safety thermostat, thermometer - Working pressure: 4 atm - Fuel: wood waste, sawdust - Flue gas evacuation system: cyclone, forced draft fan, connection ducting - Furnace: lined with high alumina refractory bricks – prepared for wet materials from processing. Special refractory bricks laid with high alumina content cement, suitable for high humidity – optimized for the combustion of sawdust from log cutting Crodjw Ewafopfx Aiioi Flue gas extraction system - Belt-driven fan - Multicyclone separator - Connecting ducts: boiler-multicyclone, multicyclone-fan, fan-chimney - Chimney Included accessories - 2 safety valves - Cast iron discharge valve - Operating thermostat - Safety thermostat - Thermometer - Safety pressure switch - Pressure switch guard - Manometer with 3-way valve - Alfa 10 diameter 50 discharge valve Flue gas removal system - Cyclone for collecting solid combustion particles before flue gases are released into the atmosphere - Smoke extractor/fan to improve combustion by increasing draft in the boiler, essential if a smoke treatment system is present or when significant flow losses occur - Painted carbon steel alloy connection ducts between boiler and multicyclone, and between multicyclone and fan - Electrical panel serving the feed electropump, static level, pressure switches, minimum level probe for the smoke extractor fan, and all devices serving the generator - Chimney made of carbon steel