Used Changing Spindle for sale (21,161)

Condition: good (used), Year of construction: 1977, spindle bore: 360 mm, turning length: 2,000 mm, Oil Country Lathe Ø 970 x 2000 mm Double Hydraulic chuck Double chuck front and rear with 360 bore API Threading Cutter attachment Safety cover dfor front and rear chuck Giedpexf E Rcofx An Rot Conical turning carriage Multi fix tool system DBC Turning Length: 2000mm Swing over bed Ø: 970mm Swing over cross slide Ø:500mm Spindle bore: 360mm Spindle power: 22kW Stroke pinole: 360mm Spindle taper: 6Mk Speeds / ranges: 28-500Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 2000mm/min. Length: 5500mm Width: 1900mm Height: 1900mm Weight: 10600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Manufacturer: MAZAK Type: Integrex 200-4 S Control: MAZATROL MATRIX Year of Manufacture: 2010 Specifications Metric US Standard Max. turning diameter 660 mm X-axis 580 mm Y-axis 160 mm Z-axis 1045 mm B-axis 225° Spindle bore 82 mm Spindle speed 5000 rpm Spindle power 18.5 kW Counter spindle speed 6000 rpm Counter spindle bore 82 mm Counter spindle power 18.5 kW Tool changer 80 Driven tool speed 12,000 rpm Dimensions (estimated) Length 4500 mm Width 2400 mm Height 2900 mm Giedjwpufgepfx An Rot Weight 9200 kg Please note: The information on this page was obtained to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend you check all important details.

Condition: excellent (used), Year of construction: 2018, turning diameter over cross slide: 800 mm, spindle bore: 92 mm, turning diameter: 800 mm, turning length: 6,000 mm, total length: 9,000 mm, total width: 1,900 mm, total height: 2,100 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 14 rpm, HeidenHain ND-780 with 3 axis Read-outX, Zo, Z  HeidenHain LS388C Scales Gijdpfx Ansvn Svus Ret 2 x CE Chuck covers for 500 & 900 mm SCHUNK 3 chuck Ø 400-102  Bison 4 chuck.... Steady rest Ø 30 - 210 mm Steady rest Ø 210 - 370 mm DBC Turning Length: 6000mm Swing over bed Ø: 800mm Swing over cross slide Ø:520mm Swing in the gap Ø: 870mm Gap length: 320mm Spindle bore: 92mm Spindle power: 15kW Bed width: 550mm Spindle taper: 6Mk Speeds / ranges: 14 - 1400rpm Length: 9000mm Width: 1900mm Height: 2100mm Weight: 7670kg

Condition: good (used), travel distance X-axis: 798 mm, travel distance Z-axis: 358 mm, Chip conveyor  SMW Front and Rear chuck 700 mm  Double revolver 6+8 positions Big Bore 360 mm Tailstock with power quill Tooling package included with inserts and jaws Max. turning Ø:665mm X-Axis: 798mm Z-Axis: 358mm Spindle bore: 360mm Speedrange: 500Rpm Gedpswxb Erofx An Roit Spindle power: 45kW Pinole taper: 6Mk Stroke pinole: 230mm Quill Ø: 150mm Length: 8100mm Width: 275mm Height: 2100mm Weight: 13000kg

Condition: good (used), Year of construction: 1987, turning diameter over cross slide: 810 mm, spindle bore: 130 mm, turning diameter: 1,140 mm, turning length: 7,500 mm, quill stroke: 300 mm, total length: 7,500 mm, total width: 2,300 mm, total height: 1,650 mm, bed width: 600 mm, Please note: not original pictures its only 3000 length not 5000 mm   3 Guide way construction 2 Axis HeidenHain Digital readout Feed in 3 directions all tool post slide Central lubrication   Work load flying in chuck 2500 kg Giodpfxjv S Dp Ij An Rot Work load NOT supported 8500 Kg Work load supported 10000 kg   Optional 4 chuck approx. 1200 mm Optional 4 chuck approx. 1500 mm Optional package with 3 steady rest fixed model from  .... to ....  Turning length: 5000 / 7500mm Turning diameter bed Ø: 1140mm Turning diameter slide: 810mm Turning diameter pit Ø: 1500mm Pit length: 2500mm Spindle bore: 130mm Bed width: 600mm Quill: 130Ø Quill stroke: 300mm Spindle mount: 6Mk Power: 25kW Speed: 9 - 900rpm Length: 7500mm Width: 2300mm Height: 1650mm Weight: 12000kg

Condition: excellent (used), CATALOG NUMBER 7855 Technical specifications: - Spindle diameter: 40mm - Spindle working height: 160mm - Interchangeable spindle Godsy Rrw Nepfx An Roit - Spindle locking - Height adjustable up/down - Original cast iron fence with full adjustment - 4 spindle speed settings + forward/reverse: 3000, 4500, 6000, 9000 rpm - Table dimensions: 1520x1000mm - Extendable table support - With side carriage for tenoning - Carriage with height adjustment - Electric brake - 3-roller power feed - Number of speeds: 4 - Forward/reverse rotation - Power feed motor: 0.65 kW - Main machine motor: 5.9 kW - Extraction port diameter: 3x120mm - Overall dimensions (L/W/H): 2030x1250x1400mm - Weight: 1100kg ADVANTAGES – Made in Poland – Top-mounted control panel – With side carriage for tenoning – 3-roller power feed – DTR technical documentation included – Not repainted – Used spindle moulder, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at 4.2 PLN/EUR exchange rate (Price may change in case of major exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7859 ADVANTAGES – 8 spindles – with oscillation – variable spindle spacing (adjustable) – 2 work tables – unpainted – used drilling machine, in very good condition Gedpfx Anoy Rrwij Reit TECHNICAL DATA Drilling spindles: 2x4 pcs Oscillation range left/right: 40mm per side Oscillation speed adjustment on inverter Spindle head adjustment: up/down Each pair of spindles (2 pcs) adjustable: left/right 2 rotation speed options + left/right Max tool diameter: 15mm Table adjustment: up/down Table dimensions: 700x200mm 4 hydraulic cylinders Motor power: 2x 2kW Oscillation motor: 0.75kW Dimensions (L/W/H): 1800x1350x1300mm Weight: 862kg Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 1998, total length: 2,960 mm, total width: 1,330 mm, total height: 1,850 mm, Colour: Grey - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: V255154 - Spindle diameter [mm]: 30 - Table length [mm]: 2400 - Table width [mm]: 800 - Guide present: No - Spindle speed: Automatic - Min. spindle speed [rpm]: 3000 - Max. spindle speed [rpm]: 9000 - Spindle speed control: Incremental - Voltage [V]: 400 - Current consumption [A]: 18 - Transport dimensions: 2960mm x 1330mm x 1850mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gsdpfxoyvr S Ds An Roit Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1999, total length: 1,000 mm, total width: 2,040 mm, total height: 1,710 mm, Colour: Grey Empty weight: 900 kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 126-02049 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 1990 - Max. tool diameter milling head [mm]: 180 - Feeding device present: Yes - Brand: Holz-her Giodpfx Anewnigce Rst - Number of wheels [pcs]: 3 - Number of speeds: 2 - Voltage [V]: 380 - Current consumption [A]: 12 - Power [kW]: 6.2 - Transport dimensions: 1000mm x 2040mm x 1710mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2001, total length: 2,680 mm, total width: 1,200 mm, total height: 2,200 mm, Colour: Grey Empty weight: 950 kg Price: On request Table milling machine Hofmann TFS 1200 Serial no. 127-01204 Year of construction 2001 7.8kW, 16amp, 400V 45 degree tilt adjustable. Aigner guide Feeder - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 127-01204 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 2680 - Table width [mm]: 450 - Tiltable spindle: - └ Min. tiltability [°]: 0 - └ Max. tiltability [°]: 45 Gsdpfx Anewl I E Ee Rsit - Feeding device present: Yes - Brand: Masterwood - Type: Euromeo - Number of wheels [pcs]: 4 - Number of speeds: 2 - Guide present: Yes - Brand: Aigner - Min. spindle speed [rpm]: 3000 - Spindle speed control: Incremental - Transport dimensions: 2680mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2021, functionality: fully functional, Minimax cu 410es F 26 TERSA Combination Machine * Ø 350 mm main saw blade with max. cutting height of 118 mm, achievable even with scoring blade installed * Saw assembly with permanently precise dual pivot segment guide * Scoring unit with separate motor and Ø 120 mm blade, easily adjustable from outside * High-precision format sliding table made of anodized aluminum on hardened and crimped steel guide rails * Smooth-running, high-precision anodized aluminum sliding table with proven, permanently smooth-running ball contact system on hardened and crimped steel rails * Large crosscut frame (1200 x 650 mm) with roller and extendable aluminum telescopic fence, up to 3300 mm * Saw unit tiltable from 90° to -45° * Tiltable spindle moulder from 90° to -45° backwards into the moulder fence * Four spindle speeds * Spindle reversible (right/left rotation) * Quick change to thickness planing thanks to parallel-opening planer tables * 2-speed feed on thickness planer table * Helical steel infeed roller for consistent wood feed * Three independent industrial motors * With separate rip fence and separate jointer fence * Main switch lockable * Motor equipped with protective switch * Weight: approx. 1300 kg * Surface Planer Planer table width: 410 mm Planer table length: 2200 mm Max. depth of cut: 5 mm * Extraction Connection Saw blade guard extraction port diameter: 60 mm Number of extraction ports: 3 Extraction port diameter: 120 mm * Thickness Planer Table length: 775 mm Table width: 410 mm Min. working height: 3 mm Max. working height: 240 mm Max. depth of cut: 5 mm * Electrical Data Number of motors: 3 Main drive motor power: 5 kW Scoring saw motor power: 0.55 kW Voltage: 400 V Mains frequency: 50 Hz Gijdpjyz Sdwsfx An Rjt * Spindle Moulder Tilting range: 0 – 45° Spindle diameter: 30 mm Usable spindle length: 125 mm Speeds: 3500 / 6000 / 8000 / 10000 rpm * Max. cutter diameter lowered: 240 mm tenoning: 320 mm * Planer Cutterhead Type: TERSA Diameter: 95 mm Number of knives: 4 pcs Speed: 5000 rpm * Circular Saw Unit Crosscut capacity: 2600 mm Rip capacity with fence: 1000 mm Max. crosscut width left of blade: 3300 mm Sawblade tilt: 90 – 45° Max. cutting height at 90°: 104 mm Max. cutting height at 45°: 68 mm Max. blade projection at 90°: 118 mm Max. blade projection at 45°: 84 mm (Main) saw blade diameter: 350 mm (Main) saw blade diameter with scorer: see above (Main) saw blade speed: 4200 rpm * Sliding Table and Work Table Sliding table length: 2660 mm Sliding table width: 360 mm Sliding table height: 142 mm Table length: 1250 mm Table width: 430 mm Table height: 900 mm * Feed Speed range: 6 – 12 m/min Transport available at extra cost.

Condition: good (used), Centre height: 290 mm Centre distance: 3000 mm Swing diameter over bed: 580 mm Swing diameter over cross slide: approx. 400 mm Spindle bore: 63 mm Spindle mount DIN 55027: Size 8 Speed range: 25 – 1120 rpm Bed width: 365 mm Longitudinal feed: 0.03 – 1.3 mm/rev Cross feed: 0.008 – 0.33 mm/rev 80 metric threads: 0.25 – 76 mm 96 Whitworth threads: ½” – 152 tpi 52 module threads: 0.25 – 22 module 88 diametral pitch threads: 1 – 176 DP Tailstock taper: MK 4 Drive power: 5.5 kW Dimensions (L x W x H): 4450 x 1300 x 1350 mm Weight: 2800 kg Accessories / Special Features: • Quick-change tool post, brand "Multifix", size B • Hardened bedways • Bed stop Gedpfx Ajxtu Eren Rsit Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Quick-change tool post, tool post head, quick-change tool post, quick-change drill bit post, quick-change boring bar post, quick-change turning tool post, tool post -Quick-change tool holder: quick-change turning tool holder Godpjwa Rt Isfx An Rsit -Recording dimensions: see photos -Cutting tool holder: Ø 31 mm MK4 -Dimensions: 135/55/H125 mm -Weight: 2.7 kg

Condition: new, Precision control and lathe Make: OPTiturn Model: TH 4210 Item No.: 3462050 Giedpfx Anedbgxco Ret Condition: new machine Tip height: 210 mm Top width: 1,000 mm equipped as standard with: -Machine base -Quad steel holder -Light machine -Reducing bushing MK 6 / MK 4 -2 fixed centres MK 4 -Fixed bezel, 15-105 mm -Bezel running with 10-65 mm -Chuck guard, electrically protected -Coolant system -Change gears set -Oil -Control tool -Manual

Condition: new, Year of construction: 2026, Precision center lathe and feed spindle lathe Make: OPTIMUM Model: OPTiturn TZ 4 Item no.: 3432240 Condition: New machine Center height: 200 mm Center width: 800 mm Speed: 45 - 1,800 rpm (16 steps) equipped as standard with - 3-axis digital readout DPA 32 - MK 3 fixed center point Giodpfx Ajgqw U Ron Rot - quick-change toolholder size B - BD turning tool holder - Reducing sleeve MK 6 / MK 3 - Fixed steady rest ø 10 - 130 mm - Moving steady rest ø 10 - 100 mm - Coolant device - Chip tray, extendable - LED machine lamp - Operating tool

Condition: reconditioned (used), Year of construction: 1989, Universal lead and spindle lathe Make: WEILER Model: Condor B Year of manufacture: 1989 - overhauled newly painted RAL 7035 light gray Mach. No.: 1401 with guarantee Accessories: Giedpfog R S Rcjx An Rst - 3-A digital display FAGOR Innova 30i T, new - Chuck protection hood with electrical fuse, new - Quick-change tool holder base body size B - Bed stop - Coolant device - Chip back wall - Operating instructions -used, as seen -

Condition: new, Precision lead screw and feed screw lathe Manufacturer: GDW Model: LZ 400 V economyline Condition: New machine Gjdpfexg Emyex An Rjit with stepless speed control to the highest safety standard Centre height: 200 mm Centre distance: 1,000 mm Spindle bore: 62 mm Standard configuration includes: -- 3-axis digital readout, 7" colour display with constant V feature - LED machine light, integrated into machine enclosure - Electromechanical limit switch system for threading and feed operations - Quick-change toolpost size B with turning tool holder - Main drive brake system (spindle brake) - Sliding chuck guard with interlock monitoring - Removable chip guard rear panel - Sliding splash guard - Extendable chip tray - Simple bed stop - Central lubrication system - Set of change gears (number of teeth: 21-33-84-120) - Reducing sleeve for main spindle inner taper ME 70/MK 4 - Protective flange for spindle nose DIN 55027-6 - Additional service socket - 2 fixed centres DIN 806-MK 3 - Set of operating tools, keys and oil gun - Spare shear pins - Operating manual with spare parts list and electrical documentation

Condition: refurbished (used), Year of construction: 2007, Universal lead and feed spindle lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled newly painted RAL 7035 light gray Mach. no.: CK17 Center height: 140 mm Center width: 500 mm Spindle bore: 40 mm Gijdpfx Aov D Ip Non Rot with guarantee geometric acceptance with test report Accessories: - 3-A digital display SIEMENS - Chuck protection hood with electrical protection - Drive motor braked - Quick-change tool holder base body size A - Bed stop - Covered lead and feed spindle - Chip rear wall - Pull-out chip tray - Operating instructions - Used, as seen -

Condition: reconditioned (used), Year of construction: 1990, Universal lead and feed spindle lathe Make: WEILER Model: Praktikum 160 B Year of manufacture: 1990 - overhauled newly painted RAL 7035 light gray Mach. no.: 90-160-2054 Center height: 160 mm Center width: 650 mm geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i T - covered lead and feed spindle - braked drive motor - coolant system - electrically secured chuck protection hood - quick-change tool holder size A Godpshy Tdyjfx An Rsit - simple bed stop - chip back wall - operating instructions with guarantee used as seen The machine is technically corresponding to the state of the year it was built.

Condition: reconditioned (used), Precision guide and spindle lathe Make: GDW Model: LZ 250 S Year of manufacture: 1998 - overhauled, repainted RAL7035 light gray Mach. no.: 069 Centre height: 125 mm Centre width: 500 mm with guarantee geometric acceptance with test report Accessories: - 3-axis digital display ISKAR NP-20T-V with V = c for constant cutting speed - Quick-change tool holder base body size A - Bed stop - Coolant system - Chuck protection hood, electrically secured - Chip rear wall - Operating instructions - Used as seen - Gedopz Hubjpfx An Reit

Condition: new, Precision Center Lathe and Center Lathe Make: OPTIMUM Model: OPTiturn TZ 4V Item No.: 3432245 Condition: New machine center height: 200 mm center width: 800 mm speed: 50 - 3.000 rpm infinitely variable via 2 gear steps with SIEMENS Inverter-Vario-drive equipped as standard with: Gijdpfjg Hkmrsx An Rot - 3-axis digital display DPA 32 - digital speed display in headstock - fixed center point MK 3 - quick change tool holder size B - turning toolholder BD - reducing sleeve MK 6 / MK 3 - steady rest fixed ø 10 - 130 mm - steady rest travelling ø 10 - 100 mm - Coolant device - Chip tray, extendable - LED machine light - Operating tool

Condition: reconditioned (used), Year of construction: 1974, Universal lead and spindle lathe Make: WEILER Model: Commodor Year of manufacture: 1974 - overhauled newly painted RAL 7035 light gray Mach. no.: 0068 Center height: 180 mm Center width: 1000 mm Spindle bore: 56 mm with guarantee geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-T new - Chuck protection hood with electrical protection - Quick-change tool holder size B - simple bed stop - Coolant device - Operating instructions Godpomgaddjfx An Reit - used, as seen -

Condition: new, Precision lead and feed screw lathe Manufacturer: GDW Model: LZ 330 V economyline Condition: New machine with stepless speed control according to the highest safety standards Centre height: 165 mm Centre distance: 670 mm Spindle bore: 43 mm Standard equipment includes: - 3-axis digital readout, 6" colour display - LED machine light, integrated into machine enclosure - Electromechanical limit switch device for threading and feed operation - Quick-change toolpost, size A, with turning toolholder - Main drive brake system (spindle brake) - Sliding chuck guard with limit switch monitoring - Removable rear chip guard - Sliding splash guard - Pull-out chip tray - Simple bed stop (longitudinal fixed stop) - Central lubrication - Set of change gears (tooth counts: 21-27-28-33-42-120) - Reducing sleeve for main spindle internal taper ME 50/MK 3 Giodpfx Anow S E Dde Rjt - Protective flange for spindle nose DIN 55027-5 - Additional service socket - 2 fixed centre points DIN 806-MK 3 - Set of operating tools, keys, and oil gun - Replacement shear pins - Operating manual with spare parts list and electrical documentation

Condition: used, Year of construction: 1989, SCHÜTTE SF 32 DNT Max. bar diameter round/square: 32 / 22 mm Spindle circle diameter: 300 mm Bar feed: 125 mm Longitudinal slide travel (total/operational): 100 / 80 mm Cross slide travel (total/operational): - Lateral: 50 / 33 mm - Center: 50 / 30 mm Gijdpfsyxckcjx An Ret - Lower: 60 / 37.5 mm Spindle speeds (stepless): 450 – 3,150 rpm Main times (stepless): min. / max. 0.8 – 100 s Secondary times: 1 – 1.25 s Creep feed: 3 rpm Main drive: 22 kW Dimensions (incl. bar feeder): approx. L x W 7.3 x 1.6 m Weight: approx. 8.3 t Voltage: 400 V / 50 Hz Contents consist of: SCHÜTTE SF 32 DNT machine Bar loader

Condition: excellent (used), Year of construction: 1995, Tilting spindle moulder with long work tables and feed unit Motor power: 5.5 kW, 400 V, 50 Hz Gsdpfx Ansyynpto Roit Spindle speeds: 3,500/4,500/6,000/8,000/10,000 rpm with digital readout Useful spindle height: 180 mm Vertical spindle stroke: 155 mm Interchangeable spindle MK 5, diameter 30 mm Spindle tilting range: +45° / -10° Spindle height adjustment: electric with digital readout Spindle tilt adjustment: electric with digital readout Fence adjustment: manual with fine adjustment Spindle reversal (right/left rotation) CE compliant Extraction connection: 2 x 120 mm Working height: 860 mm Including round arch milling fence Including interchangeable spindle MK 5, diameter 25 mm Including interchangeable spindle MK 5, diameter 50 mm Dimensions (L x W x H) approx.: 2650 x 1250 x 1700 mm Weight approx.: 1000 kg HOLZHER feed unit 3 rollers 8 speeds Note for used machines: • Errors in technical details and prior sale reserved. • Stated prices are ex location—loaded free onto transport! • The machines have been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (Please respond to enquiries only with your address and telephone number!)