Lead/traction spindle lathe

GDW LZ 400 V

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Lodpjv Erkaefx Ahkorr Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: excellent (used), Year of construction: 2012, Technical data: Maximum turning height: 250 mm Turning diameter over bed: 500 mm Turning diameter over support: 300 mm Distance between centers: 1500 mm Revolutions: 25 – 2000 RPM Spindle bore: 75 mm Digital position display: ACU-RITE Motor power: 11 kW CE marking Dimensions (length x width x height): approx. 3100 x 1450 x 1600 mm Weight: approx. 3 tons Accessories: 3 quick-change tool holders 3-jaw chuck 250 mm 4-jaw chuck 400 mm Rapid traverse Various tools Lrsdpfsy U Ni Dex Ahkjr The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Year of construction: 1992, condition: good (used), machine/vehicle number: 20281, Offer 23034 Technical specifications: - Max. grinding length approx. 350 mm - Max. grinding width 150 mm - Max. installation height with/without magnet 150 / 210 mm - Grinding wheel stroke approx. 200 mm - Clamping surface 300 x 160 mm - Magnetic clamping plate 250 x 150 mm - Grinding wheel dimensions approx. 200 x 80 x 78 mm - Grinding wheel speed 2800 rpm - Swivel range of the grinding arm approx. 180° Lodpfoklxwksx Ahksrr - Manual swivel arm clamping via clamping lever - Wet grinding system - Drive 400 V / 1.85 kW - Space requirement approx. W 850 x H 1650 x D 800 mm - Weight approx. 350 kg

Condition: like new (used), Year of construction: 2010, functionality: fully functional, spindle bore: 50 mm, turning diameter: 400 mm, turning diameter over bed slide: 400 mm, turning diameter over top slide: 250 mm, center height: 200 mm, center width: 1,000 mm, turning length: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, total length: 1,950 mm, total width: 1,060 mm, total height: 1,635 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 40 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, center height over cross slide: 200 mm, overall weight: 865 kg, spindle mount: MK 3, spindle motor power: 5,300 W, Equipment: documentation/manual, rotational speed infinitely variable, type plate available, EMCO EMCOMAT-20 D universal lathe in very good condition, complete with tool cabinet and various quick-change tool holders, collets, and 3 RÖHM chucks. Manufacturer: EMCO Model: EMCOMAT-20 D Year of manufacture: 2010 Condition: very good, fully functional Location: Graz (Austria) Lrsdpfx Ahoyxvqvjker Highlights at a glance: - Center distance 1000 mm – ideal for longer workpieces - Stepless speed control up to 3000 rpm - Robust, induction-hardened machine bed - Hardened and ground guides & gears - Electromechanical spindle brake - Very stable design – 865 kg machine weight - Safety monitoring via electrical limit switches - Equipped with a modern 3-axis digital display Technical data: - Center distance: 1000 mm - Center height: 200 mm - Turning diameter: 400 mm - Spindle bore: 50 mm - Speed: 40 to 3000 rpm - Spindle connection: DIN 55029 size 5 - Drive power: 5.3 kW - Tailstock diameter: 50 mm - Arbor: MK3 - Stroke: 120 mm - Dimensions (LxWxH): 1950 x 1060 x 1635 mm - Weight: approx. 865 kg Optional equipment: - Coolant system - 3-axis positioning display with 0.001 mm accuracy Scope of delivery: - 1 x EMCO EMCOMAT-20 D - 1 x Drawer cabinet with various tools, collets, etc. (see pictures) - 2 x RÖHM chucks (3 and 4-jaw chucks) - 6 x Quick-change tool holders (see pictures) - 1 x Complete manufacturer documentation (operating manual, wiring diagram, etc.) Quality & Safety: The machine impresses with the typical EMCO quality “Made in Austria”: Are you interested? Please contact us to arrange a viewing appointment or to request a quote.

Condition: used, Year of construction: 1972, turning diameter over bed 1650 mm turning diameter over slide rest 1350 mm turning length 10000 mm turning speeds 1,4 - 280 U/min greates pass round over bed 1580 mm center height over square guideway 825 mm Lrjdpfxjy S Duvj Ahksr bed length 13.350 mm bed width 1.120 mm spindle diameter in front bearing 260 mm spindle bore 82 mm upper head travel 500mm tailstock quill diameter 200 mm max. workpiece weight between centres 10.000 kg weight of the machine ca. 25,5 t Power 45 KW The machine is a first-hand purchase, is free from defects and is in very good condition. In 2023, the headstock was overhauled; this included replacing the main spindle bearings, chrome plating and reworking the main spindle and bottom wheel (bearing seat). The guideways are also in very good condition, considering their age. Accessories - Feed guard Equipment - 3-axis digital display - 1 x faceplate - 1 x roller stand - Chip conveyor (Kabel Schlepp 300/100)

Condition: used, Year of construction: 2011, Technical details: turning diameter over bed: 1090 mm turning diameter over support: 690 mm turning length: 1100 mm centre distance: 6000 mm turning dia. in gap: 1250 mm centre height: 500 mm Lrjdpjzdkz Defx Ahksr spindle passage: 152 mm range of revolution per miute: 6,3 - 1250 U/min face slide travel: 525 mm tailstock quill taper MT: MK 6 tailstock quill adjustment:: 260 mm cross feed: 0,016 - 19,45 mm/U longitudinal feeds:: 0,032 - 38,9 mm/U number of feeds: 160 spindle bore: 155 mm total power requirement: 30 kW weight of the machine ca.: 10,65 t dimension machine approx.LxWxH: 8,3 x 2,0 x 1,90 m The machine is equipped with: Digital Readout (DRO) 4-position tool post Tailstock Rapid traverse Lead screw and feed rod Heavy-duty machine bed Conventional design *

Condition: excellent (used), turning diameter over bed 900 mm turning diameter over slide rest 600 mm Ljdjym D H Tspfx Ahkorr turning length 3000 mm spindle turning speed range 11,2 - 560 U/min tool holder Multifix D1 total power requirement 22 kW weight of the machine ca. 5,6 t dimensions of the machine ca. 5,6 x 1,8 x 1,7 m Safety-related conversion according to CE standard 2017 2011 new plan pull spindle, lock case partially renewed, lubrication according to internal plan

Condition: new, turning diameter 325 mm turning length 1000 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 440 mm reus 12 (85-2000) U/min Ljdpotycpajfx Ahkorr tail stock MK 3 quill stroke 100 mm diameter of quill 40 mm spindle taper DIN 55027 Nr. 5 spindle bore 32 mm feed längs 0,006 - 1,77 m/min feed quer 0,003 - 0,885 m/min total power requirement 2,2 kW weight of the machine ca. 770 kg dimensions of the machine ca. 2150 x 950 x 1350 mm Furnishing: - Cooling device - Machine light - chip rear wall - Spindle protection - Lathe chuck protection - Tool holder protection - Foot pedal with braking function CE - Interchangeable gears *incl. Optional equipment - 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type A, incl. 4 tool holders - 2-axis digital display DRO Newall

Condition: used, Year of construction: 2000, used CONDOR AC, partially overhauled Centre height: 165 mm Between centres: 750 mm Spindle bore: 40 mm Spindle speeds: 22–2,800 rpm, infinitely variable - Quick-change tool post size B - WEILER DZ-V digital readout - Hollow spindle stop - Fixed steady rest - 7 Multifix tool holders - Flat splash guard - Electrically interlocked chuck guard - Change gears and various soft jaws The machine is partially overhauled: - Bed slide: guideways re-coated and hand-scraped, gibs and lower guide strips adjusted Ledpfxjx E Um Ns Ahkerr - Cross slide measured and aligned on bed slide; cross slide dovetail guide newly scraped, gibs adjusted and scraped - Top slide newly scraped and gib matched - All measuring scales overhauled and cables replaced The machine is located in our showroom at 71334 Waiblingen-Beinstein and is immediately available. For details on equipment, please contact us.

Condition: good (used), x-travel 400 mm y-travel 375 mm z-travel 250 mm table-size 205 x 800 mm T-slots 4 x 45 14 H7 speeds 50 - 3150 U/min tool taper 40 ISO quill stroke 50,0 mm Feeds X + Z Axis 5.0 - 1000 mm/min Feeds Y Axis 5.0 - 670 mm/min rapid traverse 2.4 / 1.6 m/min control Heidenhain total power requirement 5.1 kW weight 950 kg range L-W-H 1860 x 1790 x 1750 mm Machine from a vocational training center In good condition (!!) Equipment: - MAHO universal tool milling/drilling machine - HEIDENHAIN "TNC 135" positioning/path control * 3-axis manual data input control * Programmable by the machine operator * Convenient and easy operation - Electric motor-driven feed rates in all axes (X/Z/Y) * X and Z axis: 5.0 - 1000 mm/min with rapid traverse of 2.4 m/min * Y axis: 5.0 - 670 mm/min with rapid traverse of 1.6 m/min - Tiltable milling head to both sides - Tiltable T-slot universal table - Vertical clamping range - Continuously variable speed adjustment - Manually extendable spindle sleeve - Hardened and ground guideways Lrsdpfx Aexl E Syohksr - Electro-hydraulic tool clamp - Coolant system - Front coolant tank - operating instructions