Oscillating multi-spindle drilling machine

C.A.M.A.M.

Year of construction: 2000, condition: used, 2000 M.A.C. SN-OL 1230x650-10T Shrinker press for wood bending Working dimensions: mm. 1230 x 650 Itsdsychqhjpfx Ahben Pressure power: Ton. 10 Motor power: kW 5.5

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Pneumatic press for edge-gluing wood panels. TECHFA type PTD 6000 Itsdpfx Ahsyivr Hjbjn Max. dimensions of glued elements: - length: 6300 mm - width: 160 mm - height: 850 mm Press is divided into 4 sections.

Condition: used, Vertical grinder for round leg heads, Camam brand, model , used Itedpfxsz Rnm As Ahben

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: AC, overall weight: 5,180 kg, workpiece weight (max.): 1,800 kg, input current: 46 A, input voltage: 400 V, C.M. Wheel Blast Machine T18 H850 (Year of Manufacture 2016) Product Description The C.M. Surface Treatment T18 H850 is a high-performance wheel blast machine for the economical surface treatment of workpieces. The machine is suitable for descaling, decoring, cleaning, and surface preparation prior to painting or coating. Itedpfxsz I Iv Rj Ahbon The rotating table system allows a wide variety of workpieces to be blasted evenly. The robust design and powerful turbine enable high processing quality while simultaneously ensuring efficient abrasive consumption. The system features an integrated abrasive processing system with separator, cyclone extraction, and filter system. This ensures that the abrasive is continuously cleaned and reused. Electrical Data Feature | Value Mains Voltage | 400 V Phases | 3 Frequency | 50 Hz Maximum Power | 27.78 kW Installed Total Power | 24.82 kW Operating Current | 45.46 A Working Area Feature | Value Max. Workpiece Diameter | 1,800 mm Max. Workpiece Height | 850 mm Max. Workpiece Weight | 1,800 kg Wheel Feature | Value Power | 7.5 kW Wheel Diameter | 334 mm Number of Blades | 6 Peripheral Speed | 30–70 m/s Abrasive Feature | Value Usable Grain Size | 0.1–2.0 mm Maximum Hardness | 62 HRC Initial Filling | 1,500 kg Average Consumption | approx. 500 g/kWh Filter System Feature | Value Suction Capacity | 60–150 m³/min Compressed Air Consumption | 7.2 Nm³/h Filter Area | 75 m² Filter Weight | 1,100 kg Machine Weight Feature | Value Machine Weight | 5,180 kg Unladen Weight (Base Machine) | 4,080 kg Noise Level Feature | Value Sound Pressure Level (Leq) | 83 dB(A) System Components The system consists of: Cabin with rotating table Wheel Sieve Bucket elevator Separator Extraction system with cyclone Filter system Control panel / electrical system Application Areas Descaling Decoring Cleaning of steel components Surface preparation Removal of scale Preparation for painting or powder coating Shot blasting Special Features Rotating table blast machine for large workpieces Closed abrasive system Automatic abrasive processing Integrated dust extraction with cartridge filter Robust industrial design Suitable for workpieces up to 1,800 kg

Condition: good (used), functionality: fully functional, Automatic stacking unit for destacking battens, boards or long goods in kiln trucks. Manufacturer Makor, type ACA 2. Equipped with 2 transfer arms. Part lengths approx. 1600 - 3000 mm (depending on part thickness), maximum part width approx. 170 mm. Installation length approx. 3000 mm. Weight approx. 1500 kg. Iodeyxyfkspfx Ahbetn

Condition: used, Year of construction: 2000, For sale is a professional, automatic rotary (carousel) brushing and sanding machine CAMAM SAW 91, manufactured by the renowned Italian brand C.A.M.A.M. S.r.l. This machine is specifically designed for high-efficiency brushing, sanding, and finishing of curved and shaped wooden elements, such as chair backrests, table legs, and profiled furniture components. Built on a heavy, electro-welded steel frame, it ensures stable and vibration-free operation in industrial environments. Technical Specifications: * Manufacturer: CAMAM (C.A.M.A.M. S.r.l., Manzano, Italy) * Model: SAW 91 * Serial Number (Matricola): 00016 * Year of Construction: 2000 * Voltage (Volt): 380 V * Frequency (Hz): 50 Hz Ijdpfxsz E N Aae Ahbjtn * Power (kW): 4 kW (Total connected load) * Current (A): 9 A * Weight (Peso): 900 kg * Certification: CE marked

Condition: used, 4-spindle adjustable vertical drilling machine, Camam brand Itjdozz Rpvspfx Ahbsn + 3 spindles to be revised

Condition: new, Year of construction: 2026, I am selling this excellent helper in a carpentry workshop or a smaller sawmill for preparing plastered lumber and producing boards. This is a double-blade edge saw / Rip saw KUSING OP-400 ECO. Motor power: 2x 4kW Maximum cutting height: 55mm Feed speed: 4-18 m/min Maximum material width: 600mm Maximum width between blades: 400mm The machine's primary purpose is as a complementary machine to smaller band saws. The machine rapidly speeds up the process of producing boards, saving time in their production. With a special option, it is possible to adjust and extend individual shafts by 55 to 105mm, thanks to which you can place up to 4 blades in the machine at once. KUSING OP-400 ECO Double-Blade Rip Saw Are you looking to speed up board production in your carpentry workshop or smaller sawmill? The KUSING OP-400 ECO is the perfect partner for preparing planed lumber and turning logs into boards quickly and efficiently. _____ Why Choose the OP-400 ECO? • High Productivity: Dual 4 kW motors ensure consistent cutting power, allowing you to process lumber faster than with a single-blade setup. • Versatile Cutting Capacity: o Max. Cutting Height: 55 mm o Max. Material Width: 600 mm Itsdpfx Aex Utv Iohbsn o Max. Distance Between Blades: 400 mm • Efficient Feed System: Adjustable feed speed from 4 to 18 m/min gives you precise control over material flow for different wood densities and board thicknesses. • Expandable Blade Configuration: With the optional shaft-extension kit, you can extend each shaft from 55 mm up to 105 mm, accommodating up to four saw blades simultaneously. This means you can rip multiple boards in a single pass, dramatically reducing setup times. • Ideal Secondary Machine: Designed as a complement to smaller bandsaws—speed up your workflow by rough-cutting logs into boards before final dimensioning. Technical Specifications • Motors: 2 × 4 kW • Maximum Cutting Height: 55 mm • Feed Speed Range: 4 – 18 m/min • Maximum Material Width: 600 mm • Max. Blade Gap (between blades): 400 mm • Shaft Extension (optional): 55 – 105 mm (fits up to four blades) The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: used, Year of construction: 1996, functionality: fully functional, SECOND-HAND MULTIPLE BORING MACHINE CAMAM MOD. FMV/4U - 4 BORING UNITS - N. 4 independent boring units - Control panel Itodpfx Aox N S Tbshbon - Year 1996 - CE rules

Condition: used, Year of construction: 1998, functionality: fully functional, SECOND-HAND HIGH SPEED VERTICAL MILLING MACHINE CAMAM MOD. FV/1T-1P Ijdpfxex Rdhto Ahbetn - Volt. 380/50 - CE rules - Year 1998

Year of construction: 1999, condition: ready for operation (used), Two identical circular saws Cremona for the veneer production industry are available. Working width saw 1: 4200mm, working width saw 2: 5100mm. An on-site inspection is possible. Sale of individual units is possible. Itjdpfx Ajw I E D Ajhbjn

Condition: used, machine/vehicle number: 145, SECOND-HAND 2 TABLE MORTISER CAMAM MOD. MO/2A Itsdjwrd D Dspfx Ahbjn - 4 spindles - Volt. 380/50 - S/N 145

Year of construction: 1997, condition: used, SECOND-HAND COPYING CAROUSEL CAMAM GC6/4F-4L - 2+2 milling units (roughing and finishing) - 2+2 sanding units (roughing and finishing) - pneumatic locking cylinders - n.6 working stations - with cabin - Control panel Itedpohz Dlbefx Ahbon - volt. 380/50 - S/N 73 - CE rules (year 1997)

Condition: new, Number of spindles 6 St. Working width 15 - 250 mm Working height 10-200 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 6-24 m/min. Kuper SWT XL-6 Automatic Planer and Moulder (Window Version with Glazing Bead Separation) ----- - ??Number of spindles: 6 (Bottom, Right, Left, Top, Top, Bottom) - Working width: 15 - 250 mm - Working height: 10 - 200 mm - Spindle speed: Frequency-controlled 4,000 - 8,000 rpm - Feed speed: 6 - 24 m/min, infinitely variable - Feed motor with electronic brake: 4 kW - Equipped for glazing bead separation in window production - Motorized axial and radial spindle adjustment - K2 Comfort Control, Professional - 9" Touchscreen Manufacturer's Description (Summary): ----- 1st Spindle: HORIZONTAL BOTTOM ----- Siemens IE3 motor with inverter brake: 7.5 kW Diameter: 40 mm Spindle length: 275 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool cutting circle: 125 - 160 mm Rebating unit: 20–25 mm diameter difference relative to planing head Important: Machine cannot be operated without the jointing/rebating cutter Extraction nozzle: D = 125 mm "Pro-Lock" tool clamping system 2nd Spindle: VERTICAL RIGHT ----- Siemens IE3 motor with inverter brake: 7.5 kW Diameter: 40 mm Spindle length: 176 mm Clamping length (effective length): 170 mm Speed, frequency-controlled: 6,000 - 8,000 rpm Tool cutting circle: 112 - 200 mm Axial adjustment range: 60 mm Table plate adjustable to tool radius Standard profile depth 20 mm Extraction nozzle dia. 125 mm Extraction; individually adjustable chip deflector "Pro-Lock" tool clamping system Motorized radial positioning Motorized axial positioning 3rd Spindle: VERTICAL LEFT: ----- Siemens IE3 motor with inverter brake, 7.5 kW Diameter 40 mm Spindle length 176 mm Clamping length (effective length) 170 mm Speed, frequency-controlled 6,000 – 8,000 rpm Tool cutting circle 112 – 200 mm Axial adjustment range 60 mm Standard profile depth 20 mm Table plate adjustable to tool radius Extraction nozzle dia. 125 mm Extraction; individually adjustable chip deflector (chips discharged downwards) "Pro-Lock" tool clamping system Motorized radial positioning Motorized axial positioning 4th Spindle: HORIZONTAL TOP: ----- Siemens IE3 motor with inverter brake, 7.5 kW Diameter 40 mm Spindle length 260 mm Speed, frequency-controlled 6,000 – 8,000 rpm Tool cutting circle 112 – 200 mm Isdpfx Ahszrh E Njbetn Axial adjustment range 20 mm Pneumatic pressure shoe, dynamically adjustable via linear guides Pressure lips in front of the spindle: pneumatically sprung, externally adjustable, with path control Standard profile depth 20 mm Extraction nozzle dia. 125 mm Extraction; individually adjustable chip deflector "Pro-Lock" tool clamping system Motorized radial positioning Motorized axial positioning 5th Spindle: HORIZONTAL TOP: ----- Siemens IE3 motor with inverter brake 7.5 kW Diameter 40 mm Spindle length 260 mm Speed, frequency-controlled 6,000 – 8,000 rpm Tool cutting circle 112 – 200 mm Axial adjustment range 20 mm Standard profile depth 20 mm Extraction nozzle dia. 125 mm Extraction: individually adjustable chip deflector "Pro-Lock" tool clamping system Motorized ...

Condition: used, Year of construction: 1995, machine/vehicle number: 1/95, SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/4F/1L - Double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 ouside milling unti Iedsqmnidjpfx Ahbjtn - 1 outside sanding unit - 4 sides cabin with roof - Kw 28 - Year 1995