Used Milling Spindle for sale (16,750)

Condition: good (used), Manufacturer: MAZAK Type: Integrex 200-4 S Control: MAZATROL MATRIX Year of Manufacture: 2010 Specifications Metric US Standard Max. turning diameter 660 mm X-axis 580 mm Y-axis 160 mm Z-axis 1045 mm B-axis 225° Spindle bore 82 mm Spindle speed 5000 rpm Spindle power 18.5 kW Counter spindle speed Gisdpfx Ajwpufgob Djt 6000 rpm Counter spindle bore 82 mm Counter spindle power 18.5 kW Tool changer 80 Driven tool speed 12,000 rpm Dimensions (estimated) Length 4500 mm Width 2400 mm Height 2900 mm Weight 9200 kg Please note: The information on this page was obtained to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend you check all important details.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), height adjustment type: electric, Tiltable spindle moulder HOFMANN TFS 107 Giedpou Nz Ndofx Ab Det Basic equipment: 7.5 kW motor, 400 V, 50 Hz, table size 1,200 x 815 mm, heavily ribbed cast iron table, with table rings Electronic starting and braking device Electric height and swivel adjustment in rapid and creep speed accurate to 1/10, height adjustment approx. 145 mm, swivel adjustment +/- 45.5° 4 speeds 3,000/4,500/6,000/9,000 Milling fence type 2601 Efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with "fix" quick-release nut left/right rotation, machine socket, arc milling guard type TAPOA, Hofmann "Centrex". Paint finish: gray-white/signal blue Electrical connection value: Motor power 7.5 kW - Minimum fuse (A) slow blow 30 Additional equipment installed in this machine: - Table size 2000 x 815 mm with extendable support by 480 mm, instead of standard table - Infinitely variable speed control TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor, instead of standard motor with soft start - HOFMANN milling fence type 2620 instead of standard fence 2601 Efficient Total adjustment via handwheel according to display incl. option to switch to tool zero dimension. Digital display for individual jaw adjustment. Including quick clamping system for the fence jaws - 2 cast iron fence jaws 500/500 mm - Guide rails and fillet board, consisting of 5 rulers, 1 fillet board, 10 sliding blocks - Control panel upwards - Tool compartment for TFS 107 (only possible with top console) - Operating instructions TFS 107 German

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW with 4-roller feed, fixed speeds. Speed extensions. Height of worktable: 920 mm. Spindle tilting: -10° + 45°. Max. spindle projection above table: 175 mm. Spindle speeds: 3250/6500-5000/10000 rpm. Max. tool diameter: 250 mm. Weight: approx. 950 kg. Location: Nattheim. Gedpfx Aow Enw Isb Deit

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Tilting Spindle Moulder MAKA SF 4510 / GRIGGIO with Power Feed Very good condition, the machine comes from a small village carpentry shop with 3 people. Everything works perfectly. All bearings and guides are in excellent condition; the machine runs very smoothly. Equipped with a moulder fence, with one fence jaw adjustable in depth and featuring fine adjustment with scale, enabling jointing work, e.g., for a glue joint profile. The entire fence can also be adjusted via a set screw, allowing for very precise settings. With spindle locking via clamping lever. Chip extraction is very effective, with two 120mm diameter extraction ports on the fence and machine. Comes with a 30mm spindle, continuously tiltable from -5° to 45°, adjusted via handwheel, with a precise degree scale. Selectable clockwise/counterclockwise rotation. We deliver the machine in person anywhere in Germany for 220.00 EUR and carry out a demonstration, so you have no risk with your purchase. Delivery to other EU countries is also possible. Large table opening, adjustable with rings (this allows the use of cutters with a very large diameter and safe cutting with small cutters). Spindle speeds: 3200, 4200, 6000, and 8000 rpm. Spindle height adjustment via handwheel with locking screw. Spindle is exchangeable (a 40mm spindle can also be used). Optimal power transmission via V-belt drive. Machine table is 1070mm wide and 940mm deep. The machine is ready for immediate use. 380V, 5500W, with motor protection switch against overload. Year of manufacture: 1999. Weight: approx. 700kg. The machine has a CE certificate. Comes with manual, motor brake, and emergency stop switch, fully compliant with all requirements of the woodworking trade association (Holz-BG). Included is also a 3-roller power feed from HAFFNER with 8 speeds. Optimal, simple, fast, and safe operation. Gijdpjy Rh Nzofx Ab Dst

Condition: used, PTP VPU 1 Conventional milling machine Table dimensions: 260x1000mm Taper: 40mm X axis: 500mm Y axis: 300mm Z axis: 400mm Dimensions: 170x130x145mm Variable speed Vertical and horizontal use Power supply Head adjustable in degrees With cooling pump Location: Hamont-Achel, Belgium Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. PTP VPU 1 Conventional Milling Machine Table dimensions: 260x1000mm Cone: 40mm X axis: 500mm Y axis: 300mm Z axis: 400mm Dimensions: 170x130x145mm Variable speeds Can be used vertically and horizontally Power supply Head adjustable in degrees Giodpfx Aberzbkto Dst With cooling pump Location: Hamont-Achel, Belgium Call or email for more information Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. PTP VPU 1 conventional machines Table dimensions: 260x1000mm Cone: 40 mm X axis: 500 mm Y-axis: 300 mm Z-axis: 400 mm Dimensions: 170x130x145mm Variable speeds Can be used vertically and horizontally Power supply Head adjustable in Grad With vacuum pump Standort: Hamont-Achel, Belgium Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen

Year of construction: 2009, condition: used, Drive with 3 milling motors ensures a very stable structure (steel profiles can be machined from 3 sides in a single clamping). Locking mechanism for the lift of the horizontal motors prevents profiles from being scratched when inserting and removing them. Processing of profile widths up to 300 mm possible (e.g., mailboxes) using only the vertical milling motor. Gisdpfx Absy Nm Erj Djt Specification: - Equipped with 1 vertical and 2 horizontal milling motors - Pneumatic workpiece clamping with 2 horizontal clamping cylinders - 3 pneumatic spray nozzles - Milling area of the vertical motor (L x D): 365 x 230 mm - Milling area of the horizontal motors (L x H): 250 x 100 mm - Maximum profile height: 150 mm - Operation via switches and 4 hand levers

Condition: excellent (used), functionality: fully functional, Balestrini Mini-C 2500mm Linear Copy Milling Machine Model MINI-C Giodsy Ew Ehjpfx Ab Dot Working table length: 2500 mm Two milling units, one per side Milling motor: 2 x 5.5 kW Maximum tool height: 120 mm Heads included Hydraulic table feed, steplessly adjustable Pneumatic clamps for units and material Number of material clamps: 5 pcs.

Condition: used, Milling spindle Manufacturer: HSD Type: ES 779L 4P 12.00 kW H1 HSD milling spindle 12 kW with tool changer and 6-position station for Kuka Quantec series Consisting of: 1 piece Water-cooled milling spindle with tool changer HSD ES779L 4P 12.00 kW H1, liquid cooling 1 piece Gisdpfx Ajwyay Deb Djt Tool station for 6 tools (tool changer station) with Leonie measuring station for checking the tools 1 piece Kuka Tech cabinet with KEB frequency inverter, control technology and water cooler Art. No. 00216249, Serial No. 0395009, year of manufacture 2018 Weight 360 kg 1 piece Hose package and connecting cable from the control cabinet to the HSD spindle. Originally designed for a Kuka robot of the Quantec series, incl. all brackets and connections.

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Giodoyi A Tdspfx Ab Det Storage location: Nattheim

Condition: good (used), Year of construction: 1990, Table milling machine with power feed Tilting spindle Gijdpfxoyy I R Ro Ab Dst With table extension on both sides

Condition: like new (used), For sale is a used Felder spindle moulder F-900 Z with mortising and slotting table length of 1300 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 5 spindle speeds - Spindle tiltable 90° - 45° - Fence for tooling up to Ø 230 mm - Multi-adjustment system - Mortising and slotting table 1300 mm Gijdpfxow Hfd Ie Ab Dst - Electrically height-adjustable and tiltable with "PowerDrive" - Motor power 7.3 kW / 9.9 HP SD-Start - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299. Related terms: spindle moulder, milling machine, moulding Reference: R-A0117

Condition: used, Year of construction: 2013, machine/vehicle number: AB214206, functionality: fully functional, operating hours: 100 h, power: 7 kW (9.52 HP), input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, spindle diameter: 30 mm, pivoting range: 90 °, rip fence adjustment: manual, actuation type: manual, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,000 rpm, table width: 810 mm, table length: 2,500 mm, total length: 2,500 mm, total width: 1,250 mm, overall weight: 640 kg, Equipment: CE marking, We offer this Casadei F25 swivel spindle milling machine, year of construction 2013, but uses only few weeks. Spindle tiltable -45 to 45° Height adjustment: Handwheel Tilt adjustment: Handwheel Height and angle display: mech. counter display spindle diameter: 30 mm spindle speeds: 3000, 4500, 6000, 8000, 10000 rpm power input: 7 kW Suction connection: 1 x 120mm, 2 x 60mm Machine length: 2500mm Machine width: 1250mm Gedpfx Abjy Drraj Dsit Weight: 640kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Spindle diameter: 40 mm Lenz roller feed for curved elements Smooth speed adjustment Feed motor power: 0.25 kW Feed rotation: left/right Safety switch Manual spindle height adjustment Table width: 104 cm Table length: 98 cm Giodpfx Abev Uz S Se Djt Machine construction: cast iron

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, power: 11 kW (14.96 HP), spindle diameter: 40 mm, overall weight: 1,500 kg, milling spindle length: 150 mm, Double-sided swivel unit bearings with two sturdy segment guides, modern steel construction column, heavy-walled, heavily ribbed cast iron table, replaceable milling arbor, three-phase motor with 4 speeds, electric height and tilt adjustment in rapid and creep speed, and electronic digital display, incremental dimension switching for height adjustment, milling stop with fine adjustment and metal stop jaws and replaceable aluminum splinter guards, Gjdpjwcpqqsfx Ab Dsit extraction nozzles on the milling stop and below the table, each 120 mm in diameter, minimum extraction speed at the extraction nozzle: 20 m/s, rotating table insert, locked reversing switch for left and right rotation, lockable main switch, cam switch, automatic motor brake Table size: 1350 x 800 mm Table height: 880 mm Motor power: 11 kW MK 5 milling arbor mount Speeds 3000/4500/6000/9000 rpm Mill arbor swivel range: -5° to +45° Height adjustment: approx. 145 mm Control: CNC Table extension on both sides, total length 2500 mm, including extendable frame support Stepless 4-roller feed 2-axis control Mill arbor with 40 mm diameter and 150 mm length

Condition: used, Henninger high-speed milling spindle SK40 Type 801 M391 For Deckel milling machines Ratio: 1:6 Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. 60°C with tools over: ø 12 mm Gisdpfx Abevygxne Djt With 14 collets Clamping range 2 - 15 mm

Condition: used, Henninger high-speed milling spindle SK 40 Gsdpfxevygzis Ab Dsit Type 801 H580 Ratio: 1:6 Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. +60°C with tools over: ø 12 mm without collets

Condition: good (used), Spindle diameter: 80 mm Spindle nose: SK50 Spindle speeds: 11 - 1000 RPM X-axis movement: 1700 mm Y-axis movement: 1800 mm Z-axis movement: 1800 mm Spindle out (W-axis): 710 mm Table size: 1100 x 900 mm Elbo Digital readout: On Y-axis and Z-axis Featured with: - Turning table Gisdpfx Absphl Ece Djt - Toolholders Spindle engine: 7,5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Machine weight: 10 Ton

Condition: new, Year of construction: 2026, functionality: fully functional, Spindle Moulder TF 190 E (400 V) NEW Milling fence with finely adjustable aluminium stops, quick and easy speed change, speed setting displayed via LED indicators, large working area with torsion-resistant cast iron table, selector switch for clockwise/counterclockwise spindle rotation, milling unit made of cast iron, hold-down clamp for precise workpiece guidance. Extraction port ø 100 mm Work table 690 x 480 x 900 mm, 400 Volt, drive motor 2.2 kW, spindle usable length 100 mm, spindle diameter ø 30 mm, maximum tool diameter ø 200 mm, retractable, Giodpfx Absyxqhpe Djt spindle stroke 100 mm, spindle speeds 1800/3000/6000/9000 rpm, machine dimensions 730 x 520 x 680 mm, weight 155 kg. LIST PRICE RRP: €1,688.00 Transport available at extra charge!

Condition: new, Year of construction: 2024, This is a CNC router that has 4 spindles operating simultaneously and can change automatically! That increases the effectiveness of the production, making it 4 times faster. That CNC milling machine is perfect for big production of facades, doors, windows, casing moldings, etc. Wattsan M1 1325 planetary gears allow you to cut hardwoods and soft metals easily. Also, a vacuum table can be installed so the fixation is as steady as stone. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Wattsan M1 1325 S4 machine characteristics: Working area: 1300x2500 mm Spindle: 6 kW Machine size: 2000 x 3040 x 1780 mm Weight: 1000 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. Gisdpfor D Ntfjx Ab Det YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: good (used), Year of construction: 2008, machine/vehicle number: 3486579, Offer 26048 Single-spindle Copy Milling Machine for 3-Sided Processing Technical Data: Gsdpfx Abjyymgks Doit - 3-sided machining in a single clamping for lock and euro-profile cylinder (PZ) cutouts, - e.g. milling in aluminium / plastic / steel profiles - Operated via two-hand lever - Material clamping by pneumatic clamping cylinder - Manual profile bar rotation device for 3-sided processing - Working range - x (crosswise) 250 mm - - y (longitudinal) 90 mm (depending on position) - - z (vertical) 120 mm (depending on position) - Max. profile height, depending on position: approx. 120 mm - Max. profile depth: 100 mm - Spindle speed: approx. 6,000 + 12,000 rpm - Pneumatic connection: 8 bar - Drive: 400 V / 1.5 kW - Required space: approx. W 650 x H 1550 x D 850 mm - Weight: approx. 340 kg

Condition: new, Year of construction: 2024, functionality: fully functional, FIVE STAR THM-460 Horizontal dual-head milling machine with indexing axis Ideal machine for milling and chamfering P-plates for toolmaking from 4 sides in one clamping. Basic technical equipment: Control system - FANUC 0i-MF - User-friendly touch screen, 10.4" color display - Dialog-supported data input Machining capacities - Workpiece length min./max.: 20 - 460 mm - Workpiece width min./max.: 20 - 460 mm - Workpiece height min./max.: 12 - 150 mm (opt. 180 mm) - Workpiece corner chamfer Cmax.: 10 mm Travel paths - X-axis (machine table): 620 mm - Y/Z-axis (infeed axis/headstock): 330 mm / 330 mm Drive power of the axes - X-axis motor: 2.5 kW - Y/Z-axis motor: 1.4 kW - B-axis motor: 1.4 kW Speeds - Rapid traverse X (machine table): 15 m/min - Rapid traverse Y (infeed axis): 10 m/min - Rapid traverse Z (headstock): 10 m/min - Manual feed: 0 - 1,500 mm/min - Automatic feed: 0 - 5,000 mm/min Gedpfxjvi I Nmj Ab Dsit Main spindles - Two horizontally opposed milling spindles, designed for heavy-duty cutting - Drive type: Belt drive - Speed range: 100 to 1,000 min-1 each - Drive power: 11 kW each - Spindle interface: 2" / Ø50.8 mm each - Oil-cooled with separate spindle oil cooler (optional) Tools (standard) - Cutter head: Ø160 mm (opt. Ø200 mm) Note: Tools not included in the standard scope of delivery! Rotary axis (B-axis) - Indexing: (standard 5° pitch) - Indexing angle: 0°, 45°, 90°, 135° and 180° (for 2-sided machining) - Table size: Ø320 mm - Max. Max. load: 320 kg Workpiece alignment - 90° stop for easy positioning of the workpieces by the operator - Automatic measuring unit for detecting the workpiece position Guides - X-axis: Linear roller guide - Y-axis: Flat guide, TURCITE-B coated - Z-axis: Flat guide, TURCITE-B coated - 2 chip spirals (left and right) in the machine - Automatic spiral chip conveyor Miscellaneous - Central lubrication oil / air - Switch cabinet with heat exchanger - Machine sheet metal partial cladding - Support work table - Hand tool box - LED work light - 3-color warning light - CE declaration of conformity according to European directives Machine dimensions and weight - Machine size: 2,800 x 3,410 x 2,200 mm - Machine weight: approx. 7,500 kg Spindles - Power-Up spindle motor 15kW - Spindle interface 1-7/8" each, suitable for face cutter head Ø200 mm arbor diameter: Ø47.625 mm tools - Face cutter head Ø200 mm, MAROX-Tools Taiwan Type: SE545R/L0810, DC200 Rotary axis (B-axis) - Indexing axis, 5° increments, standard option Indexing angle: 0°, 45°, 90°, 135° Table size: Ø320 mm Max. Load capacity: 320 kg Compressed air, coolant and chip management - Chip compressed air nozzle, 1 piece each, external to the spindles, standard option (metal compressed air articulated tube) - Coolant system with separate cooling lubricant tank and low-pressure pump, as well as paper filter, tank capacity: 600 liters Filter capacity: 80 l/min. - Chip spirals (left and right) in the machine, standard option - Automatic hinged belt chip conveyor

Condition: good (used), FIL Aurora Model FU 120 Double Spindle Bed Milling Machine Year 1978 Table 500 x 1820mm Longitudinal Travel of table 1500mm Gedpfxsyx H Uxo Ab Djit Cross travel 500mm Vertical travel of head 650mm Max height from table to spindle 850mm Horizontal spindle BT 50 Speeds 25 – 1200 rpm with independent 7.5HP Drive Arbour support for Horizontal spindle Vertical Spindle (swivels) BT 50, Speeds 24 – 1600 rpm with independent 7.5HP Drive Pendant control operating Power feeds and rapids 3 axis Digital readout Weight 6000kg

Condition: used, functionality: unexamined, Ferwood Code: RU0009466 - Manufacturer Code: 03314K00 - Condition: Used - Functionality: Not tested - Compatible machine: - Weight: 15 kg - Dimensions: 70x46x34 cm - If interested, we offer a refurbishment service—please contact us. Gijdpfxeyrqt Ro Ab Djt

Condition: used, functionality: fully functional, Ferwood Code: RU0009466 - Manufacturer Code: 03314K00 - Condition: Used - Functionality: Fully operational - Compatible Machine: - Weight: 15KG - Dimensions: 70X46X34 - If interested, we offer an overhaul service; please contact us. Gsdpfoyrqr Hex Ab Djit

Condition: used, functionality: fully functional, Ferwood Code: RU0009466 - Manufacturer Code: 03314K00 - Condition: Used - Functionality: Fully operational - Compatible Machine: - Weight: 15KG - Dimensions: 70X46X34 - If interested, we offer an overhaul service; please contact us. Giedpfxeyrqbbj Ab Djt