Used Changing Spindle for sale (24,691)

Condition: good (used), Year of construction: 1989, machine/vehicle number: 18052, functionality: fully functional, pressing force: 3 t, stroke length: 500 mm, distance table to ram: 500 mm, total length: 700 mm, total width: 300 mm, total height: 780 mm, overall weight: 185 kg, Dornpresse Ageo DP3000R in good, fully functional condition. Technical specifications can be found in the last image. Iisdjz Hlplspfx Ahyeh

Condition: excellent (used), Year of construction: 2010, I sell the vertical wood shredder Comafer MAC 600S Year 2010 Cylinder system with knives sindle Motors 11KW Iiedez Suz Nopfx Ahyoh Including full documentation and CE Condition like new. Avialable immediately.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 440.10.008.12, functionality: fully functional, operating hours: 500 h, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 102 mm, cutting width (max.): 2,600 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: manual, rotational speed (max.): 4,700 rpm, total length: 2,200 mm, total width: 1,500 mm, total height: 1,070 mm, overall weight: 350 kg, table height: 90 mm, year of last overhaul: 2012, Equipment: CE marking, documentation/manual, saw blade guard, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) - Spindle moulder fence with fine adjustment + "Euro II" safety guard - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount Iedpez H Sbbjfx Ahyoih - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo).

Condition: used, Year of construction: 2018, Technical details: weight of the machine ca.: 3,5 t Iiedpfez Sr Dujx Ahysh

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 51.10.318.12, functionality: fully functional, operating hours: 300 h, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 315 mm, cutting width (max.): 420 mm, control type: manual, roller diameter: 440 mm, pivoting range: 45 °, actuation type: electric, total height: 1,900 mm, total length: 780 mm, total width: 650 mm, overall weight: 140 kg, table height: 91 mm, year of last overhaul: 2012, saw band speed: 333 mm/s, Equipment: CE marking, documentation/manual, motor brake, saw blade guard, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) - Spindle moulder fence with fine adjustment + "Euro II" safety guard - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount Iodsz Im Huspfx Ahyoih - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo).

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed Iiedsz Df Txjpfx Ahyoh of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: good (used), Year of construction: 2014, functionality: fully functional, using Stäubli robots Specifications, information, price, images, etc. can be found in the PDF documents attached. Isdpfxezuc T Tj Ahysih

Condition: new, New lathe with large spindle bore. Brand : KMS Type : CS6250C TDC : 1000mm Turning diameter over bed : Ø 500 mm Turning diameter over slide : Ø 300 mm Turning diameter in bag : Ø 710 mm Turning length in bag: 240 mm Bed width : 390 mm Spindle diameter : Ø 105 mm Spindle speeds : 12 (36 - 1600 rpm) Tailstock spindle diameter : 75 mm Tailstock range : 150 mm Tailstock recording : MC 5 Machine dimensions : ± 2630 x 975 x 1270 mm (L x W x H) Machine weight: ± 2100 kg Machine equipped with: - Longitudinal and transverse feed. - Rapid traverse on longitudinal and transverse feed. - Movable and adjustable stops for automatic longitudinal feed. - Thread cutting shaft (Metric/Inch/Module/DP thread cutting possible. - Multifix type quick change tool holder. - 2-axis digital readout (Brand: Sino). - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock). - 4-jaw chuck Ø 400, bore 105 mm (Camlock). - Drive plate Ø 630 mm (Camlock). - Steady rest Ø 120- Ø 260 mm. - Follow rest Ø 20 – Ø80 mm. - Coolant device. Iodpfjhhm Edox Ahysih

Condition: used, Year of construction: 1963, Rigid milling machine Year of manufacture: 1963 Iijdpfezk N Iiex Ahyjh Spindle diameter 30 mm Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 1981, Used Machine Year of manufacture: 1981 Features and Technical Specifications: - With 2-stage pneumatic lifting spindle - Mandrel diameter: 40 mm - With long table length: 2500 mm Iiodpfjzk N Dqox Ahyjh - With extendable frame support - With milling stop featuring Panhans metal stop jaws and fine adjustment - Machine must be inspected/overhauled. Basic functions are intact Availability: Immediately Location: Röllbach

Condition: used, Year of construction: 1992, Table milling machine, Panhans Type 250, from a training workshop. Iiodoztwr Iopfx Ahyjh - Dovetail and slot table - Aigner integral fence - Elu feed system - Power: 5.5 kW - Speeds: 3000/4500/6000/9000 rpm - Clockwise/counterclockwise operation - Spindle: 30 mm #8503 Net price

Condition: good (used), Year of construction: 1974, TOYOSK 01BB Fixed 12 Multi Spindle Machine Manufacturer: TOYOSK Type: 01BB Ijdpsvbcydefx Ahyjih Year of manufacture: 1974 Spindle: 12 Bore: 6mm, 12 points simultaneously Feed: 100mm Speed: 2-speed (2500 / 2850rpm) Spindle diameter: 19-23 mm Table size: 350 x 450 mm Spindle speed: 2200-450 mm Power: 1.5 kW Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: used, Year of construction: 2004, Tornos MultiDeco 20/8 Number of spindles: 8 Maximum bar diameter: 20 mm Spindle speed: 5000 rpm Main spindle power: 15 kW / 18.5 kW Maximum part length: 100 mm without backworking; 75 - 80 mm with backworking Number of backworking spindles: 1 Backworking spindle axial travel: 160 mm Backworking spindle motor power: 1.1 kW CNC control unit: Fanuc Iisdpfx Aszy Spuehyoh Programming system: TB-DECO software platform IEMCA integrated automatic bar feeder High-pressure coolant pump and fine filtration system Automatic chip conveyor The machine is in working condition and can be inspected upon request.

Condition: new, TC 205 x 1000 CVS Trade fair machine, color blue Technical data: Turning diameter over bed: 410 mm Center height: 205 mm Turning diameter over cross slide: 234 mm Turning diameter in offset: 610 mm Bed width: 280 mm Center distance: 1000 mm Number of spindle stages: 8 Speed range: 80 - 2000 1/min Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle mount: MK 6 Travel of tailstock spindle: 130 mm Tailstock mount: MK 4 Max. tool size: 22 mm Travel of cross slide: 225 mm Travel of top slide: 130 mm Thread inch: 2 - 72 T.P.I Thread metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest Iiodpfsvzmtzex Ahyoh - Splash guard rear panel - 4-way tool holder - Foot brake - Emergency stop switch - Coolant device - Chip tray - Fixed centering point - Change gear set - Reducing sleeve for main spindle - Machine shoes - Operating tools - Operating instructions

Condition: used, total width: 900 mm, total length: 2,050 mm, total height: 2,100 mm, Year of manufacture: 1956 Colour: Green Empty weight: 2.400 kg - Year: 1956 - Serial number: 3706 - Drive system: Conventional - Drive system: Gear drive - Number of drills [pcs]: 4 - Power [kW]: 6 - Table type: Fixed table - Table length [mm]: 1800 - Table width [mm]: 350 - Drilling depth [mm]: 160 - Drilling capacity [mm]: 25 - Reach [mm]: 275 - Main spindle power [kW]: 6.0 - Min. spindle speed [rpm]: 180 - Max. spindle speed [rpm]: 2000 - Options: Tapping function - Transport dimensions: 2050mm x 900mm x 2100mm (l x w x h) - Transport weight [kg]: 2400kg - Transport packages [pcs.]: 1 Iisdpez R Dt Ejfx Ahysh Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Used SCM T150K model shaper with tilting spindle. 2.2 kW fence recovery unit. Iijdpfx Aoz Rzu Tshysh Shaper fence can be detached from the worktable. Fence position adjustment with handwheels and mechanical height indicators. Shaper motor: 7.5 HP. Automatic star/delta starting with rotation reversal. Spindle rotation speeds: 3000/4500/6000/7000/10000 rpm. Removable front fence. Shaper spindle tilt: -10/+45°. Table length: 2550 mm. Max. profiling tool diameter: 250 mm. Fast sector table as a replacement for the rings on the table. Weight: 745 kg. Dimensions: 2550x1200x1300 mm. CE marking.

Condition: excellent (used), For sale: a professional, two-spindle eyeletting/riveting machine, Constantin Hang Typ 150 3P, manufactured in Germany in 1983. This machine is designed for the simultaneous installation of two eyelets or rivets, significantly increasing work efficiency. The machine is used in bookbinding facilities, printing companies, and factories producing binders, folders, calendars, tags, and other paper products. It is equipped with two working units, an adjustable table, and precise guides that allow for accurate material positioning. Technical specifications: Manufacturer: Constantin Hang Maschinenfabrik Model: Typ 150 3P Year of manufacture: 1983 Serial number: 35805 Iisdpfxjz Sm Ure Ahysh Country of manufacture: Germany Type: two-spindle eyeletting/riveting machine Two working heads Adjustable work table Guides and material position adjustment Robust industrial construction Electric drive Condition: used Applications: eyelet installation, riveting, binder production, folder production, calendars, promotional tags, cardboard packaging, bookbinding and printing. The machine is sold in the condition shown in the photos.

Condition: excellent (used), Year of construction: 2015, Holzkraft T 45 W classic Iijdpfxozzci Us Ahyoh Year of manufacture: 2015 Table saw with a robust steel-cast iron construction Tilts up to -45° Usable spindle length: 108 mm Max. tool diameter: 190 mm Table dimensions: 1000 x 435 mm Dimensions of aluminum sliding table: 1000 x 270 mm Motor: 4 kW, 400 V 3500/6000/8000/10000 rpm Equipped with a crosscut fence and sliding table Support arm on a swivel arm Aluminum telescope fence with folding stops and eccentric clamping device Otherwise, standard version Includes a 3-roller feed device

Condition: excellent (used), MARTIN T27 Flex underspindle milling machine Iodpjz N Eywofx Ahyeih Spindle adjustable up and down, and at an angle of -46 to +46 degrees, electrically Interchangeable spindle shank, 30 mm diameter Long worktables, 240 cm, with extension Adjustable fence with AIGNER guides 4-roller feed system, WEGOMA 6 spindle speeds: 3000, 4000, 5000, 6000, 8000, 10,000 rpm 6 kW, 2-speed motor Brake Very good condition, 400 operating hours

Condition: used, Year of construction: 1980, machine/vehicle number: 18.742, Table milling machine with fixed milling spindle Table size 1,920 x 900 mm, Motor 6/8 kW (8/11 HP), 4 speeds 3,000/6,000/4,500/9,000 rpm, Milling arbor D = 30 mm with Morse taper MK 5, Iisdpfjul Sfmex Ahyjh Weight approx. 700 kg, Location: Seevetal, Sold "as is", as inspected, Ex works, excluding transport, subject to prior sale.

Condition: new, functionality: fully functional, Weinig Hydromat 4300 NEW / UNUSED EQUIPMENT Working Width: 30 – 300 mm (with tool diameter 203 – 250 mm) Working Height: 10 – 120 mm (with tool diameter 203 – 250 mm) 50mm spindles 6,000 RPM Bottom Horizontal Spindle Motor: 75 kW, 6000 RPM. CNC radial adjustment and positioning. Fully automatic straight jointer. Hydro Lock counter-bearing. Top Horizontal Spindle Motor: 75 kW, 6000 RPM. CNC radial & axial adjustment and positioning. Fully automatic straight jointer. Hydro Lock counter-bearing. Right Vertical spindle Motor: 37 kW, 6000 RPM. CNC radial & axial adjustment and positioning. Fully automatic straight jointer. Left Vertical spindle Motor: 37 kW, 6000 RPM. CNC radial & axial adjustment and positioning. Fully automatic straight jointer. Top Horizontal Spindle Motor: 55 kW, 6000 RPM. Segmented pneumatic pressure shoe with MarathonPower coating CNC radial & axial adjustment and positioning. Fully automatic straight jointer AND profile jointer Hydro Lock counter-bearing. Bottom Horizontal Spindle Motor: 55 kW, 6000 RPM. CNC radial & axial positioning. Iisdpfoz S Uaxex Ahyeh Adjustable and lockable table plates. Table plates with wood insert. Additional pressure shoe with wood insert for ripping operations. Max sawing height 65 mm with 100 mm flange diameter. Fully automatic straight jointer. Rotaplan pressure plate above bottom spindle. Hydro Lock counter-bearing. Feedworks Short 1.5 m infeed table with heavy 4-roller feed system 6x powered top feed rollers 11kW each (250mm). 5x bottom bed feed rollers 11kW each. (121kW total feeding power) Continuously variable electronic feed speed: 30 – 300 m/min. CNC controlled up/down feed movement positioning. Freewheel gearboxes on 4x roller feed system 250mm x 300mm wide Other information Frequency inverter drive for spindle startup/shutdown. Operating Voltage: 400 V (380-420 V range), 50 Hz; Control Panel mounted on a swivel arm. Separate control cabinet located 2.5 m from planer. Air conditioning unit for switch cabinet to prevent inverters overheating. Integration for third-party mechanization. WEINIG Machine Control (WMC): 21.5" multi-touch screen. MarathonPowerCoating PLUS special wear-resistant table coating. Automatic lubricant pump with 30L tank. Remote Support / VPN Diagnosis Network. Internal workpiece monitoring system. Safety Enclosure: Full soundproof/safety housing Slide-away anti-kickback guard for ripping.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, worktable: 870 mm x 560 mm spindle diameter: 35 mm maximum tool diameter: 180 mm spindle overhang from the worktable: 155 mm 3-roller feed mechanism three-phase Isdpfsznllrjx Ahyoih

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning length: 1,298 mm, turning diameter: 275 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 1,345 mm, spindle motor power: 15 W, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, spindle nose: JIS A2-8, Equipment: documentation/manual, We are offering this well-maintained CNC lathe, complete with powered tool, sub-spindle and Y-axis. It is a 2008 Mori Seiki NL 2500SY/1250 fitted with the MSX-850-III (Mitsubishi) control system. Technical specifications: Turning diameter: 275 / 366 mm Spindle bore diameter: 80 mm Spindle speed main spindle: 4000 1/min Spindle motor main spindle: 18.5/15 Kw Spindle speed second spindle: 6000 1/min Spindle motor second spindle: 11/7,5 Kw Movement X-axis: 260 mm Movement Y-axis: +50 / -50 mm Movement Z-axis: 1345 mm Iisdpfx Ahez Nd Dhoyjh Movement W-axis (subspindle to mainspindle): 1275 mm Min. indexing C-axis: main spindle 0,001 ° Min. indexing C-axis: second spindle 0,001 ° Number of tools on turret: 12x Number of driven tools: 12 x Spindle motor driven tools: 6000 1/min Tool Taper: BMT Bar feeder LNS Quick Load Servo lll We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 102940, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED. FEED MOTOR 22 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH 220MM TOP FEED ROLLERS BOTTOM 15KW 6,000 RPM, OUTBOARD BEARING, JOINTER READY RIGHT 11KW 6,000 RPM JOINTER READY LEFT 15KW 8,000 RPM JOINTER READY RIGHT 11KW 8,000 RPM JOINTER READY LEFT 15KW 8,000 RPM, JOINTER READY TOP 18.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING TOP 18.5KW 8,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING BOTTOM 22 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY Iisdpfx Ajz N Sznohysh 12X TOP FEED ROLLERS (2X 220MM + 10X 140MM) 7X BOTTOM FEED ROLLERS POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED MACHINE LENGTH 5.2M

Condition: used, Vitap Classic Multi-Spindle Drilling Machine, Isdoz Hxi Eepfx Ahyeih 21 spindles, left/right-hand spindles, quick-release mounting, spindle spacing 32 mm, drilling in vertical or horizontal position, 2 pneumatic clamps, power supply 380V, 1.8 kW motor, Machine ready for operation.