Used Changing Gears for sale (18,682)

Condition: excellent (used), functionality: fully functional, Reishauer NRK change gears Original change gear set with substructure, including 50 ground change gears in the original wooden box. 26 loose change gears, including 2 with Z=63, 2 with Z=64, and 1 with Z=72 (original). All gears with ground teeth. The following accessories are also available: 2 adjustable steady rests 66189-2 + 66189-3 / setting blocks (one incomplete) 9 new grinding wheel flanges Various new and unused grinding wheels Balancing mandrel Thread rolling device Roll grinding device Various cams/cam profiles Grinding device, manufacturer Landert Motoren Various oil nozzles Unused strip curtain/splash guard Iodsza Dk Sopfx Abnstk All technical specifications are subject to printing errors and omissions. Sale exclusively within EU countries.

Condition: used, Change gear, change gears, gear -Number of teeth: 141 pieces -Module: 1.25 mm -for splined shaft: Ø 25 mm Isdpfxodwc I Us Abnotk

Condition: used, Change gear, change gears, gear -for: heavy-duty lathe Braun Zerbst -Number: 23 pieces change gears -Module: mm Itodped Sikmefx Abnok -Dimensions: 530/530/H735 mm -Weight: 144 kg

Condition: used, Change gear, change gears, gear Itsdpfxedwc Ncs Abnjk -Number of teeth: 152 pieces -Module: 1.25 mm -for splined shaft: Ø 25 mm

Condition: used, Hydraulically switchable gearbox for changing the direction of rotation Hydraulic reversing gearbox for a lathe Year of manufacture: approx. 1985 Reversing gearbox for quick changes in the direction of rotation, either clockwise or counterclockwise - Electric hydraulic pump for generating hydraulic pressure (380 volts, 0.25 kW) - 2 solenoid valves for switching from counterclockwise to clockwise rotation - Equipped with pulleys with a diameter of 230 and 200 mm - Was driven by a 15 kW drive motor, enabling quick changes in the direction of rotation with high torque transmission Isdpjdz Sp Dofx Abnetk - The drive motor always runs clockwise; the gearbox is hydraulically switched to clockwise rotation, counterclockwise rotation, or brought to a standstill without any control input. Overall dimensions (L x W x H): 480 x 520 x 430 mm Weight: 170 kg In good condition.

Condition: good (used), Gear motor, electric motor, three-phase motor, electric gear motor -Gearbox manufacturer: Bonfiglioli type: MVF27/F -Manufacturer Motor: Bonfiglioli Type: 56BN/4 -Speeds: 234 rpm -Power: 0.09 kW -Construction: B5 angle -Diameter shaft: Ø 9 mm -Protection class: IP 44 -Number: 1x motors available -Dimensions: 260/130/H110 mm -Weight: 3.2 kg Itedpfoci Evnsx Abnok

Condition: excellent (used), Year of construction: 2019, Geared motor, electric motor, electric geared motor, worm geared motor, flat geared motor -Condition: Geared motor is unused -Manufacturer: NORD DRIVESYSTEMS, Flat gearbox series F -Type: SK7382AZH-180MP/4 TF Isdpfjzu S Hpjx Abnetk -Speed: 22 rpm -Power: 18.5 kW -Protection rating: IP55 -Hollow shaft: Ø 70 mm -Dimensions: 930/450/H660 mm -Weight: 410 kg

Condition: good (used), Geared motor, electric motor, electric geared motor -Engine manufacturer: VEM -Manufacturer of gearbox: VEM -Speed: 40 rpm -Power: 1.1 kW -Design: B3 -Shaft diameter: 48 mm Itodpfjckbgaox Abnok -Protection class: IP 44 Quantity: 1 piece available -Dimensions: 580/250/H300 mm -Weight: 41 kg

Condition: good (used), Year of construction: 1980, functionality: fully functional, Gear-driven drill press, no belt changes required Very quiet and smooth operation Ijdpfezuxxfsx Abnetk - Drilling capacity in steel ST 60: 30 mm - Drill spindle mount: MK 3 - Drill spindle stroke: 160 mm - 9 drill spindle speeds: 90 - 1450 rpm - Overhang: 300 mm - Table with 2 T-slots - Table dimensions, swiveling: 500 x 450 mm - Table dimensions, base plate: 350 x 400 mm - Distance from base plate to spindle nose: 1100 mm - Max. distance table - drill spindle: 660 mm - Height adjustable via rack and pinion with hand crank - Column diameter: 120 mm - Drive: 380 V / 1.2 kW - Space requirement: approx. W 600 x H 2100 x D 670 mm - Weight: approx. 350 kg - Includes drill chuck

Condition: good (used), Year of construction: 1965, max. wheel diameter 900 mm max. module 6,5 stroke up to 150 mm table diameter 900 mm table hole 360 mm weight 3,7 t External: max. diameter 900 mm Max. gear width 150 mm Internal: Max. diameter 630 mm Max. gear width 150 mm Spindle bore table 360 mm Table diameter Ø 900 mm Module 6.5 mm Length 2500 mm Width 2300 mm Height 2600 mm Weight 4100 kg Itsdjywnt Topfx Abnsk

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm y-travel 560 mm gear width 180 mm max. module 8 min. module 1 workpiece dia. 750 mm table diameter 450 mm draw-in arbor diameter 58 mm spindle stroke 200 mm adjustment range 230 mm distance between table/spindle 225-450 mm Iedpfx Absyb Sx Tonotk taper Morse 4 down feeds 0,03 mm/Hub roll feed 10n: 0,18-0,74 mm/Hub no. of strokes 12n: 47-300 Hub/min electrics - voltage/frequency 380/50 V/Hz weight of the machine ca. 5500 kg The machine was raised by 100 mm.

Condition: used, Year of construction: 2003, Control BWO tip circle diameter max. 700 mm root circle diameter min. 50 mm height of profile max. 35 mm number of spindle speeds 0 - 5400 min-1 table load capacity max. 500 kg Overall size 370x220x300 cm Total weight, approx. 15000 kg Number of working hours 94082 h Equipment: BWO control system All axes CNC controlled Oil mist extraction Coolant cleaning system with cooling unit Dittel balancing unit Accessories: Grinding wheels Ø400mm incl. Grinding wheel flanges 1 diamond dressing roller, manufacturer Dr. Kaiser, Ø160mm Counterholder tip Itsdpfsxt Ur Sjx Abnok Control cabinet: Width 70 cm x length 280 cm x height 220 cm Machine: Width 220 cm x length 370 cm x height 300 cm Coolant system: Width 170 cm x length 240 cm x height 250 cm

Condition: good (used), Year of construction: 1972, max. wheel diameter 80 mm gear width 60 mm max. module 3 Iodpsw N S D Sofx Abnotk min. module 0,1 total power requirement 0,4 kW weight of the machine ca. 120 kg dimensions of the machine ca. 0,6x0,6x0,75 m

Condition: good (used), Year of construction: 1982, max. wheel diameter 600 mm gear width 500 mm max. module 15 min. module 1 total power requirement 2 kW Ijdpfx Abjwftuxjnetk weight of the machine ca. 2 t dimensions of the machine ca. 2x1,5x2 m The rounding of the teeth is obtained by coordinating alternative movement of the cutter and rotary movement of the piece. The alternative movement of the cutter is obtained by rotating a cam, shaped in order to obtain radius or cusp rounding. A series of 4 cams allows to work modululus from 1 and 16 included. An regulation device allows change the modulus between the minimum and maximum value of every cam. The rotation of the piece is controlled by a three-stage gear wheel which forms the dividing system. The piece lock and the movement of the rapid entry of the cutter to the piece is controlled by pneumatic servo devices. The practicality and rapidity of the equipment, as well as the wide range of profiles available on the cams and the ability to process internal gears, make the machine a universal machine suitable for machining small and large series. --> technical features Max module: 15 --> Max diameter: 600 mm --> Spindle/head speed: 1450 - 2100 - 2800 rpm --> Production output teeth per minute: 35 - 50 - 75 --> Motor output spindle: 2800 rpm - 1.5 HP --> Motor power piece rotation (self-braking): 1.5 HP --> Motor power automatic (self-braking): 0.35 HP --> Motor power cooling system: 0.25 HP --> Dimensions: 2000 x 1500 mm --> Total weight: 2000 kg Accessories Cam x 5 Indexing wheels Tools Serial no. 152/0589/94 Machine with full enclosure Counter support

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm Itedou Uu S Tspfx Abnjk table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg Year of construction: Approx. 1970

Condition: good (used), Year of construction: 1976, max. wheel diameter 1250 mm gear width 1000 mm max. module 16 shifting 250 mm milling spindle speeds (infinitely variable) 32 - 200 U/min min. number of teeth 12 table hole 255 mm total power requirement 32 kW Isdjzr Rpkepfx Abnstk weight of the machine ca. 20 t dimensions of the machine ca. 5,1 x 3,2 x 3,7 m Top condition! 2 cut cycle, change gears, arbors, chip conveyor. Following hob arbors are with the machine: Diameter: 32 , 40 , 50 , 60 mm

Condition: good (used), Year of construction: 1976, max. wheel diameter 2300 mm gear width 1000 mm max. module 22 min. module 1 total power requirement 45 kW weight of the machine ca. 22 t dimensions of the machine ca. 5x3x4 m Isdpszr Rpdsfx Abnotk

Condition: used, Year of construction: 2008, Maximum workpiece outer diameter 3420 mm Minimum workpiece inner diameter 630 mm max. module 30 mm control Siemens Sinumerik 840 D Workpiece tooth width - max. 600 mm tip circle diameter 440 mm Milling arbour diameter 80 mm x-travel 1110 mm y-travel 1300 mm spindle turning speed - stepless 18 - 180 U/min rotary table speeds infinitely variable 0 - 6 U/min Ring stength 500 mm total connected load 100 kVA weight of the machine ca. 38 t dimensions of the machine ca. 8,41 x 9,05 x 5,19 m Feed rate: - X-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in 1/min - Tool 18 to 180 - Workpiece table 0 to 6 Equipment/accessories: - IFK2 internal milling head Itjdpfx Abeztz Rusnjk - Milling arbor with spacer discs - Chip conveyor - Oil mist extraction - Dry machining only - Technical documentation

Condition: used, Year of construction: 2007, workpiece diameter nominal 2400 mm max. workpiece diameter 2800 mm max. module 30 mm control Siemens Sinumerik 840 D dividing plate diameter 2200 mm Itjdpfxow Rf S So Abnjk table diameter 2500 mm Table hole Diameter / depth 800 / 875 mm max. table load 40000 kg Table rpm 4,5 min-1 clamping length max. 375 mm clamping diameter max. 350 mm cutter diameter max. 2800 mm Cutter arbor cone HSK-B160 swivelling range milling head + 30/-45° Distance Cutter - Workpiece 615 / 1600 mm weight of the machine ca. 57 t Slide drives: - Feed & rapid traverse speed: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/min Equitment/Accessories: - IFK2 internal milling head - Milling arbor with spacers - chip conveyor - Oil mist extraction - technical Documentation

Condition: used, Year of construction: 2018, Nominal power in kilowatts 7,7 MW Maximum power 8,47 MW Nominal turning speed 1150 1/min Itedpfx Abjrr Ammonek Maximum turning speed 2200 1/min Nominal torque 63940 Nm Maximum torque 70330 Nm 8 MW test bench for gears, closed loop

Condition: good (used), mileage: 1,120,500 km, power: 338 kW (459.55 HP), first registration: 12/1998, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, fuel tank capacity: 500 l, color: blue, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 12, emission class: euro2, suspension: steel-air, permissible axle load (axle 1): 7,498 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 1998, Equipment: ABS, air conditioning, differential lock, electric window regulation, parking heater, power mirror, spoiler, traction control, = Additional Options and Accessories = - 2 Bunks - 12-speed manual transmission - 600-liter diesel tank - Aluminum fuel tank - Heated mirrors - Comfort driver's seat - Roof spoiler - Differential lock - Differential lock - Speed limiter - Master switch - Air horn on the cab roof - Radio/CD player - All-around lighting - Sleeper cabin - Sun visor - Auxiliary heater = Notes = OLD SKOOL SCANIA R144-460L V8 4x2 TRACTOR UNIT, 12+2 GEARS MANUAL GEARBOX, SPECIAL INTERIOR & AIR CONDITIONING!! 460 HP, V8 ENGINE, EURO 2!! 12+2 GEARS MANUAL GEARBOX!! 600 LITER DIESEL TANK!! FULL SPOILER SET ON CABIN!! SUN VISOR!! FLASHING LIGHTS!! SPECIAL INTERIOR!! ETC.!! GOOD DRIVING CONDITION, READY FOR HEAVY-DUTY WORK!! MORE SCANIA 4x2 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; TRANSIT REGISTRATION, SHIPMENT, STACKING, TRANSPORT, OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE-STOP SHOP" COMPANY!! YOU CAN ALSO CHECK OUT OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( / ) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 8 Engine displacement: 14,200 cc Transmission Transmission: GRS900 (12+2) GEARS MANUAL GEARBOX, 12 gears, manual transmission Axle Configuration Tire size: 315/80R22.5 Brakes: Disc brakes Front axle: Max. axle load: 7498 kg; Steered; Tire tread depth left: 60%; Tire tread depth right: 60%; Suspension: Leaf suspension Rear axle: Double tires; Differential lock; Max. axle load: 11500 kg; Tire tread depth left inner: 20%; Tire tread depth left outer: 20%; Tire tread depth right inner: 20%; Tire tread depth right outer: 20%; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 9,600 kg Payload: 9,900 kg GVWR: 19,500 kg Functional Iodpfxozu Dbxe Abnetk Load compartment volume: 500 l Load area height: 118 cm Condition Technical condition: good Optical condition: good Further information Please contact the Sales Department for further information.

Condition: used, overall weight: 400 kg, Year of construction: 2021, operating hours: 5,500 h, Equipment: quick-change device, OilQuick OQ80SW, fully hydraulic Year of manufacture: 2021 Approx. 5,500 operating hours Suitable for excavators up to 45 tons Approx. 400 kg GPS pre-installation Stick width: 41 cm (expandable to 47 cm) Pin diameter: 9 cm Hole spacing: 49 cm Iodpfx Ajzu Akxsbnjtk

Condition: used, Geared motor, electric motor, electric geared motor -Handover: in its current condition as inspected -Condition: Gearbox makes quiet noises -Speed: 40 rpm -Power: 0.55 kW Iodpfeckd Ekex Abnjtk -Design: B3 -Shaft diameter: 32 mm -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: -Weight: 26 kg

Condition: used, Max. pitch dia. 250 mm (external spur) Max. pitch dia. 178 mm ((external helical) Max. pitch dia. 153 mm (Internal spur or helical) Max. face width 51 mm Iedpfx Ajy Anwisbnjtk Max. helix angle 45 deg No of speed/range 156-515 strokes /min Cutting feed pr/stroke 0,006-0,0013 Equipped with: Various change gears

Condition: good (used), weight of the machine ca. 5,5 t Table tip diameter: 35 mm Tip height above table: 75 mm Isdpezidz Ujfx Abnotk Counterholder tip diameter: 50 mm Counterholder tip stroke: 40 mm Minimum center-to-center distance: 20 mm Minimum measuring height above table: 50 mm Maximum measuring height above table: 550 mm Table diameter: 260 mm Base circle diameter: 0–630 mm Maximum rolling path: ±115 mm Maximum workpiece weight: 300 kg X-axis: 230 mm Y-axis: 370 mm Z-axis: 500 mm Max. workpiece diameter: 630 mm Software for new PCs: Windows 11 Bevel gear software, if desired, available only on Metrotek installations Additional information: - Machine calibrated according to DAKKS on November 19, 2017