Automatic straight knife grinder buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
Maximum tool width, standard 230 mm Ptcyti Tool diameter (min-max knife heads) 90 - 290 mm Grinding wheel diameter (min-max) 150 - 225 mm Grinding wheel width 5 mm Grinding wheel bore size 60 mm Grinding wheel speed, 4-speeds: 1500/1700/2400/3000 rpm Grinding wheel drive 1,1 kW Clearance angle grinding on back of knife 10 - 30° Side clearance angle grinding, manual 5 - 20° Lateral clearance angle grinding for straight knife heads Coolant tank 100 l Motor coolant pump 0,28 kW Connection values,... more
6
Overall dimensions (H x W x D): 1300 x 750 x 1000 mm Weight: 500 kg Maximum grinding length 225 mm Maximum tool diameter 300 mm Grinding wheel width 5 mm Grinding wheel bore 60 mm 40 mm spindle (50 mm can also be attached) 3-phase 1,1 kW motor Coolant tank with pump Cfbusfuw Coolant tank capacity 90 l Pump motor 0,065 kW Machine is in good condition more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bpu0h0qko MVM - GM 1000, [...] Knife [...] straight knives up to a 39"" in length: ideal for Planer and Chipper knives. Head speed: Automatic head travel with speed up to 33 FPM. Automatic wheel down feed can be set per pass and for total down [...] Motor: 2 HP Grinding motor with 16 mm spindle/shaft. Grinding chuck tiltable 0° to 90°, and grinding head tilts +5° to -30°. Chuck clearance to wheel is 1.2"" and chuck width is 3-1/2"".Coolant: Heavy Duty flood ... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Vr3g03 MVM - GM 1000 41"", [...] Knife [...] straight knives up to a 39"" in length: ideal for Planer and Chipper knives. Head speed: Automatic head travel with speed up to 33 FPM. Automatic wheel down feed can be set per pass and for total down [...] Motor: 2 HP Grinding motor with 16 mm spindle/shaft. Grinding chuck tiltable 0° to 90°, and grinding head tilts +5° to -30°. Chuck clearance to wheel is 1.2"" and chuck width is 3-1/2"".Coolant: Heavy Duty floo... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Yred8s MVM AF 2000 Automatic Grinder for straight knives up to a 80"" (2000mm) in length for planer, veneer and paper knives. Stepless variable speed carriage with travel speed up to 60 FPM (20 meters/min). -- Automatic wheel down feed can be set for: per pass and total downfeed. -- Grinding motor 8.5 HP (6.3 kW) with 16 mm bore. Grinding chuck tiltable 0 to 90ø. Chuck clearence to wheel 4.3"" (100 mm). Chuck width 4.7"" (120 mm). -- Heavy duty coolant... more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. 82tpz8phx REFORM AR 36 TYPE 6 Automatic Knife Grinder with working length to 144"" Working dimensions 144"" X 6"" for straight knifes, chipper knives, paper or planer knives. (3) grinding modes Creep Feed, Reciprocal grind and Manual Down grind -- Machine ways: The REFORM carriage allows for easy wheel changing and adjustment from the front of the machine. The carriage rides on hardened precision ground steel bands. -- Grinding head carriage: The wide ca... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Cuoaost ERMA ASM 45 automatic knife grinder for chipper, planer and paper knives. with a working length of 4,300 mm (168"") length capacity. -- Grinding motor with 7.5kW (10 HP) for the grinding head. -- Flood coolant system. -- Variable speed head travel and replaceable ways. -- Magnetic knife bar 10' x 8"". -- Manuals and some tools. more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 0gts9qx7 HANCHETT DN-54 Aotomatic Straight Knife Grinder -- With working length of 54"" for planer and chipper knives. Automatic traverse and wheel advance. Includes both the ACME and standard bar surfaces to handle both planer and chipper knives. -- Includes motor starters. more
5
Straight Grinder, Geradschleifmaschine, belt sander, internal cylindrical grinders, angle grinders, grinders pressure 6 bar speed 3000 rev / min collet holder 6 mm Weight 2 kg Qkpl9tmi7 more
6
Weinig Rondamat 960 Jcctqrv Profile grinder “COMFORT” package grinding spindle requency controlled 1500-3000 rpm same as new more


automatic ...
every day

New machines via email!

Be informed!
6
We offer: from the stock Geschalts-/ bearing resolution Knife holder for cutting machines Tidland performance 2 automatic 128401 A5 SP/20110492 525761-C -Modular mounting options allow for retrofitting in all machines
 User friendly function
 -Automatic "half-stroke function" to adjust the correct page pressure between the upper and lower knife rings
 -Optional pneumatic locking bracket pinion and cross button
 -By durable materials for rough industrial environments 
Air-flush... more
5
P3aan7• dimensions 1600x1220x1800 mm; • suitable for frozen meat; • 2 feeding speeds; • 1 grinding speed; • power 400 V, 50 Hz, 32,4 kW. more
3
Straight Grinder, Geradschleifmaschine, belt sander, internal cylindrical grinders, angle grinders, cut-off machine-power 700 watt 220V 3.4A 3000 rpm Weight including packaging 5.5 kg Libtj more
3
Straight Grinder, Geradschleifmaschine, belt sander, internal cylindrical grinders, angle grinders, grinders 125mm-Max-Power 450 Watt 380V 1,7 A / 1,0 A-3000 rpm Weight including packaging 8 kg Coxrk8bw more
3
Straight grinder, Geradschleifmaschine, belt sander, Internal cylindrical grinders, angle grinders, angle grinder br / br / pressure 6 bar br / speed 10,000 rev / min br / -Spannzangen recording 6 mm br / weight 2.6 kg Gt9tto more
5
Straight Grinder, Geradschleifmaschine, internal cylindrical grinder for milling grooves output 500 watt max rpm and throttle position 27000 U / min Suitcase suction hose Weight 7.5 kg Cj9rtizy more
2
Straight Grinder, Geradschleifmaschine, belt sander, internal cylindrical grinders, angle grinders, grinders, Weight 7 kg 3rytiu2d more
3
Straight grinder, Geradschleifmaschine, belt sander, Internal cylindrical grinders, angle grinders, angle grinder br / br / pressure 6 bar br / speed 25,000 rev / min br / recording 6 mm br / weight 1.3 kg Uzetnegpj more
3
Straight grinder, Geradschleifmaschine, belt sander, Internal cylindrical grinders, angle grinders, angle grinder br / br / pressure 6 bar br / speed 10,000 rev / min br / recording 14 x 20 mm br / weight 4 kg Uzeujxxlm more
3
Straight grinder, Geradschleifmaschine, belt sander, Internal cylindrical grinders, angle grinders, angle grinder br / br / pressure 6 bar br / speed 21,000 rev / min br / -Spannzangen recording 6 mm br / weight 1.7 kg D8ehdhp more
3
Straight grinder, Geradschleifmaschine, belt sander, Internal cylindrical grinders, angle grinders, angle grinder br / br / pressure 6 bar br / speed 25,000 rev / min br / recording 6 mm br / weight 1.3 kg Uzeuagrxl more
2
Straight grinder, Geradschleifmaschine, belt sander, Internal cylindrical grinders, angle grinders, angle grinder br / br / pressure 6 bar br / speed 10,000 rev / min br / -Spannzangen recording 8 mm br / weight 1.8 kg Uzetwvmdk more
3
Straight grinder, Geradschleifmaschine, belt sander, Internal cylindrical grinders, angle grinders, angle grinder br / br / pressure 6 bar br / speed 10,000 rev / min br / recording 18 x 12 mm br / weight 2.8 kg Lw7pn more
2
Straight grinder, Geradschleifmaschine, belt sander, Internal cylindrical grinders, angle grinders, angle grinder br / br / pressure 6 bar br / speed 10,700 rev / min br / recording 44 x 50 mm br / weight 7.7 kg D2e2k9f more
6

Automatic Drill Grinder DAREX AP5000

Düsseldorf Germany
6383 km
1999
USED
Offer
Another 12 hours
Weight approx.: 25 kg Dimensions (l x w x h) approx.: 550 x 550 x 400 mm Description: incl. Accessories Babji3g0nv In Online Auction with approx. 272 further Machine Tools and other Assets! Bidding ends: Monday, 20 November 2017 from 10am (local time) Auction start price: EUR 100 (plus VAT and 15% buyers premium) Your contact person: Christian Seidel more
5
1 x used knife grinding machine Manufacturer: Göckel Type: GA5 Year of construction: 1985 Weight: 7.8 to. Technical data: Double-sided swivel magnet Magnetic length: 2,150 x 320 cm Grinding length: 2,500 mm Ibjcnzh Terms of delivery: free loaded terms of payment: prior to pick-up more
1
Masch.-Nr. 522088 Steuerung Siemens S 5 mit automatischer Zu- und Abfuehrung Feinpruefsteuerung defekt (einige Ersatzteile noch vorhanden) ansonsten Funktionstuechtig 9ecntmaq0 Stellmass ca. B 3,7 x T 0,90 x H 3,80 m Gewicht ca. 15 Tonnen more
2
H&M HM-D Automatic Straight Upstroke Crosscut with Infeed Chains - 2004 CE Configured as follows: Infeed chains 6m long by 2m wide configured to load with single or multiple stacks of timber- with singulator Sxzh38in2 7.5m infeed table, to give 6m infeed capacity equipped with 50mm diameter rollers, 500mm long to within 2000mm of the saw, after which sheet table is fitted Heavy duty ac pusher motor and gearbox together with rack and pinion drive Standard saw unit with 550mm blade ... more
4
Grinding diameter max. 180 mm grinding length max. 1200 mm Power:. 300-1800 pcs / hr. Spindle motor: 3.0 hp Oszilation: 0.75 HP brush reduction: 0.5 hp grinding diameter with 10 spindles 90 mm diameter grinding every 2nd Spindle: 180 mm Speed: 1500/2000/2600/3200 r / min. Weight: 1190 kg Machine dimensions (L x W x H): 2450 x 1200 x 1540 mm Cddjmlbf more
3
Knife grinding machine conf, R9vtplqo more
1
REFORM, VKM 55 REFORM AFFILATRICE PER COLTELLI. REFORM KNIFE GRINDING MACHINERY, SHARPENING MACHINERY; REFORM AFFUTEUSE pour lames; REFORM AFILADORA de CUCHILLAS. Praticamente NUOVA, Practically NEW, Pratiquement NOUVELLE, Prácticamente NUEVA. Kdhq9bpde The REFORM grinding machine Type VKM is a high precision grinding machine incl. lower front rail (easy access) and incl. accordion way covers (protection of the rails). Furthermore this machine includes a high precision ZS mi... more
6
Knife Grinder Grinder for sharpening planer thin ASN-810 Grinder is designed for automatic sharpening planer blades mounted in the package to 4 pieces. Sharpening is done face polishing pots. Assuming the chip occurs outside the cut. The size, number of passes working wyiskrzających, speed and the grinding head of recurrence points - are programmed in a microprocessor controller. The grinding head is moved along the bed by means of a motor-driven helical gear running on guides with recirculatin... more
1
Fully automatic profile and straight knife grinder. Technical specifications: Grinding wheel diameter min./max. 150mm / 225mm Wheel width: Ceramic 5 mm Borazone 10 mm Grinding wheel bore 60 mm Tooling circle min./max. 100 mm / 300 mm Tool width max. 240 mm Grinding wheel drive 1.1 KW Grinding spindle speed infinitely variable n = 1500-3000 Free angle: Radial (at the back) 10 - 30 degrees Axial 0-20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 liters Profile projector, magni... more
1
Spindle included is 50 mm Maximum length of cutter block 230 mm C2p3a0ta Max diameter of cutter block 300 mm Grinder spindle drive 1,1 kW Grinder spindle speed, 4 levels, 1700/2000/2400/3000 rpm Cooling system With documentation more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 7bhnwxztr WRIGHT W-150HB-B Automatic Face and Topper -- Heavy duty automatic saw sharpener for side grinding of carbide saw blades. Circular saw size 6"" to 48"". Blades up to 36"" dia. are ground automatically; blades up to 48"" are ground manually on this machine. -- (2) 3/4 HP motors for each grinding spindle, with spindle speed of 5,150 RPM's. -- Includes the following features: Grinds radial angles from 0 to 4ø; tangential angles of 0 to 6ø; and hoo... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. X2gri79uo WEINIG R 960 Profile Knife Grinder;Specifications: 9-3/8"" Max. arbor length, tool dia. 11-3/4"" max. to 4"" minimum. -- Grinding wheel: speed inverter controlled; speeds from 1,500 to 3,000 RPM by 1.5 HP motor. -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with precision linear table bearings, setting gauges for axial constant, axial (side) clearance angle 0° - 20° -- Equipped with: Onboard diamond wheel dressing,... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. M0p0t WEINIG R 960 ""STANDARD"" Profile Knife Grinder;Specifications: 9-3/8"" Max. arbor length, tool dia. 11-3/4"" max. to 4"" minimum. -- Grinding wheel: speed inverter controlled; speeds from 1,500 to 3,000 RPM by 1.5 HP motor. -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with precision linear table bearings, setting gauges for axial constant, axial (side) clearance angle 0° - 20° -- Equipped with: Onboard diamond wheel... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Uxpriynvh This machine is suitable to sharpen automatically the face and top on carbide tipped saw blades in one set-up. The software enables free programming of special tooth shapes at any sequence. -- Saw blade dia. 3.1"" - 28"", (80 - 800 mm); saw blade center bore dia. from 10 mm upwards, saw body thickness up to 12 mm. -- Tooth pitch 0.6"" - 4.3"" (4 - 126 mm), breast angle (rake angle) -40° to +45°, back clearance angle 1° to 40°. -- Max. grindin... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Yzmmmb3zj GOODSPEED - COYER CP-168 A Back Knife Lathe -- Manufactured machine authorized by GOODSPEED.° 26.7"" Length cap., and 1/2"" - 3.9"" max. dia. [...] with: -- 10 HP Spindle motor, 1,800 - 3,200 RPM spindle speed adjustable by pulley change. -- 3 HP hydraulic feed motor, 2-speed carriage. -- Swiveling control panel, PLC sequence controller built into separate control cabinet. -- (3) pressure gauges, automatic way & support collar lubrication. F... more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Uxwkrbtaa CNC circular saw Topper/Facer is designed to gring the tops and faces of triple chip, variable pitch and alternating top or face. -- An industrial-grade computor and touch scree interface give the operator complete control of all functions. Grinding parameter for up to 14 saws, 6"" to 36"" diameter, can be stored in memory for instant set up. -- Features: -- Pentium 233 MMX [...] control. -- Touch screen for easy operation. -- Store memory... more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. 7mxznsv2s LOBO-COYER 'CP-168A' Hydraulic Copy Lathe. 26 1/2"" length cap. with 4"" min. length of stock and 1/2"" - 4"" max. diameter cap., hopper feed with automatic chucking, square or round stock can be hopper fed. -- Equipped with: 7.5 HP Spindle motor, 1,800 - 3,200 RPM spindle speed adjustable by pulley change, 3 HP hydraulic motor. -- Complete with: Swivel control panel & safety wire mesh accross the front of machine; unit is capable of produ... more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Uxhlanwzx 47"" Length capacity, 9 7/8"" max. .approx. turning dia., approx. 2-3/4"" turning dia. with steady rest (with suitable insert ring/bearing); (2) copier knife heads - one rough and one finishing knives; fixed knife can be attached to travelling steady rest for pre-rounding. --5.5/7.5 HP approx. main motor, 2800 RPM V-belt motor drive, (2) heavy duty (hydraulic) rear knife tool holders, self-contained oil hydraulic feeding system, 2 HP hydraulic... more
6
***MACHINE AVAILABLE TO END USER CUSTOMER ONLY*** S20 CNC 400MM CENTRES X 100MM, MARPOSS LENGTH POSTIONING UNIT, TABLE SWIVEL 15 DEGREES, SWIVELLING WORKHEAD, TAILSTOCK WITH FINE TAPER ADJUSTMENT, SENSITRON GAP ELIMINATOR, FANUC 16 T WITH PICTOGRAM PROGRAMMING, VERY WELL MAINTAINED..... Fwzm8un SPECIAL OFFER: FREE OPERATOR TRAINING COURSE FOR MACHINE SOLD IN NOVEMBER WE BUY/SELL ONLY SELECTED STUDER MACHINES DIRECT TO/FROM CUSTOMER. WE ARE SPECIALIST ONLY IN STUDER MACHINES FOR NEARLY 40 YEA... more
5
Meat grinder automatic grinder motor power 4,5 / 6 KW-Speed ​​Motor 1500/3000 1/min voltage 380V Snail without perforated discs and knife-weight 480 kg Hhxt2j73w more
6
pressure 60 t no. of strokes 80 - 400 Hub/min sheet width 150 mm table-size 700 x 530 mm dimension of ram 700 x 430 mm distance table - lower edge of ram 350 mm ram stroke - adjustable min/max 20 - 80 mm feed length 5 - 150 mm total power requirement 15 kW weight of the machine ca. 9 t dimensions of the machine ca. m Clorsjn - with band-feeding unit - 2 connecting rods - adjustable stroke - strip decoiler - noise absorbing cabine more
3
S2iufnybeltgrinder Scantool TAS 75 beltdimensions 75 x 2000 mm more
6
control GE Fanuc 18iT spindle passage 26 mm C - Axis 360 ° Main spindle max. machining diameter 26 mm Max. head stock stroke 220 mm Rapid speed 32 m/min Power rating 5,5 / 3,7 kW Max. speed main spindle t/min 8.000 Subspindel Max. diameter of conditioning 26 mm C - Axis 0,001 ° Power rating 3,7 / 1,1 kW Max. speed t/min 8.000 Subspindle stroke 120 mm Cross working Driven tool stations: 3 power capacity - driven tools 0,5 / 1,1 kW Frontside boring 3-fold Backside processing 4 pos. Nu... more
4
pressing force approx. 85 to passage width approx. 400 mm piston stroke 370 mm installation height up to the middle of the piston rod approx. 170 mm Mvoxj operating pressure adjustable 150 bar electrical data 380 V / space requirements length - 2,700 x depth - 1,200 x height - 1,250 mm weight approx. 2,200 kg   more
6
***MACHINE AVAILABLE TO END USER CUSTOMER ONLY^^^ WITH OPTION OF INSTALLATION, OPERATOR TRAINING, SERVICE ETC 650MM CENTRE DISTANCE x 175MM HEIGHT, EXTERNAL WHEEL 500MM, ACTIVE LENGTH POSITIONING, MOVOMATIC IN PROCESS GAUGE READY, ELECTRONIC WHEEL BALANCING, SWIVEL OF TABLE 8.5 DEGREES, COOLANT TANK, TAILSTOCK WITH FINE TAPER ADJUSTMENT, SENSITRON AIR GAP ELIMINATOR, FANUC 21i T. GRINDING MACHINES FOR RENT..... *****FREE OPERATOR TRAINING ON ALL MACHINES SOLD IN NOVEMBER***** WE BUY/SEL... more
5
Tool grinding machine grinder angle grinder rotating steel grinder Doppelschleifbock-2x cup wheels-spring table grinding wheels 200 mm Qkxru2x3l more


automatic ...
every day

New machines via email!

Be informed!

to

to

Change search
AUTOMATIC STRAIGHT KNIFE GRINDER
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close