Used Automatic Milling Machine for sale (76,582)

Condition: used, Year of construction: 2018, Technical details: x-travel: 3500 mm y-travel: 1300 mm z-travel: 1600 mm table-size: 3860 x 1200 mm mm turning speeds: 4.000 1/min max. torque on the spindle: 900 Nm tool change unit: 40 taper ISO: 50 rapid traverse: 35 m/min Fpsdpfx Aezipkbod Iji milling spindle drive: 43 kW control: TNC 640 HEIDENHAIN weight of the machine ca.: 24 t Universal- CNC-bed-milling machine with toolchanger, • H200 universal milling head 2,5° x 2,5 ° • 40-ATC • 5-axis-interpolation • DCM collission control • Interpolation turning • M&H 3D-touchprobe • ICS 20 bar • paper filter + magnetic separator • cabin • 3 chipconveyor accessories: toolholder (approx. 40 pcs.) approx. 12.000 h "machine on", approx 5.000h "spindle on", still under power in closed factory *

Condition: used, Univ. universal milling machine with active digital display, DECKEL type FP 1 Universal milling machine Machine No. 2102 - 6130 Year of manufacture 1991 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 210 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate 5 to 500 mm/min Rapid traverse 1200 mm/min Motor power 1.6 and 2 kW, pole-changing Mains connection 380 Volt, 50 Hz - Active digital display for 3 axes, HEIDENHAIN type TNC 113 - Stepless feed in the X, Y and Z axes - Spindle speed controlled via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable 100 mm - Fixed tilting table 600 x 210 mm - Coolant system in the machine base Fpsdpfxjzinzxe Ad Isi - Central lubrication - Adjacent control cabinet - Protective enclosure with hinged doors around the machine table - Original chip tray for mounting on the machine base - Machine lamp - Counter holder with counter bearing - Electrical diagram available Space requirement L x W x H 1600 x 1250 x 1750 mm Weight 900 kg Good condition

Condition: used, Univ. universal milling machine with active digital display, DECKEL Type FP 1 Machine No. 2101 - 7088, Year of manufacture 1993 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.6 and 2 kW, pole-changing Power connection 380 Volt, 50 Hz - Active control and digital display for 3 axes, HEIDENHAIN Type TNC 123 - Stepless feed rate via servo motor in the X, Y, and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable by 100 mm - Swivel, rotary, and tilting angle table DECKEL, Type 2114 - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Hinged protective shield with safety switch Fsdpfxjziny Ij Ad Ispi - Original chip tray for mounting on the machine base - Electrical diagram available Space requirement L x W x H 1600 x 1200 x 1770 mm Weight 900 kg Good condition

Condition: good (used), Year of construction: 2023, operating hours: 1,382 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 10,000 rpm, CNC Milling Machine Manufacturer: EMCO, Type: Emcomill E 350 Year of manufacture: 2023 Operating hours: only 1,382 hours Technical data Manufacturer: EMCO Type: Emcomill E 350 Year of manufacture: 2023 Operating hours: 1,382 h X-axis: 350 mm Fpedjzil Rkspfx Ad Iji Y-axis: 250 mm Z-axis: 300 mm Tool holder: SK 30 Tool magazine: 20 pcs Operating voltage: 400 V / 50 Hz Power consumption: 7 kW Spindle speed: 10,000 rpm Workpiece weight: max. 100 kg Slotted table dimensions: L 520 x W 300 mm Dimensions: L 2.50 x W 2.20 x H 2.50 m Weight: approx. 2 t Equipment • Siemens 828 D control system • Enclosed cabin • 3-axis CNC milling machine • Chip conveyor • Tool package with various tool holders • 20-position tool magazine • High-pressure coolant system (8 bar) • Tailstock • Machine documentation All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2021, Stamping Press Manufacturer: Bruderer AG, CH-9320 Frasnacht, Switzerland Type: BSTA 1600-181 Serial number / Commission: 14073 Year of manufacture: 2021 Press force: 1,600 kN (160 tons) Press control type: B2 Connected load: 99 kVA Supply voltage: 400 V / 50 Hz Pneumatic connection: 7–10 bar Clutch and brake system pressure: 4.3–5.8 bar Max. stopping time: 250 ms Total weight: 33,020 kg Control panel: Bruderer touchscreen HMI Fsdpfxozil Tre Ad Ijpi Secondary display: Nidec / SYS PCS 100-P-C Sound-insulating enclosure (red/orange) Tool stroke counter: 11,983,110 (as displayed) UVV safety inspection by Bruderer: September 2025 – no defects found Strip Feeding Line Manufacturer: Kohler Maschinenbau GmbH, Lahr, Germany Type: BZA ABH 2000.2H – KRS 18.260/19 – BF1 Machine number: 41000 Year of manufacture: 2021 Connected load: 10 kW Supply voltage: 400 V, 50 Hz Feed type: BBV 300 Motorized decoiler with yellow safety enclosure

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Fjdpfx Adjzil S Io Iopi Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: used, Year of construction: 1977, Stamping Press Manufacturer: Bruderer AG, Arbon, Switzerland Type: BSTA 110 Serial number: 4343 Year of manufacture: 1977 Press force: 110 tonnes Stroke rate: 100–850 strokes/min Stroke (adjustable): 16, 19, 26, 35, 43, 51, 58, 64, 70, 75 mm Ram adjustment: 89 mm Max. tool installation width: 1,170 mm Max. strip feed width: 400 mm Strip feed height above clamping plate: 80–180 mm Bed opening: 1,120 x 400 mm Connected load: 50 kW Supply voltage: 3 x 380 V AC, 50 Hz Control voltage: 24 V AC Compressed air connection: R ½", 6–10 bar Machine dimensions (H x W x D): 3,930 x 3,320 x 2,250 mm Total weight incl. strip feed: approx. 24,600 kg Strip Feed Unit Manufacturer: Bruderer AG, Arbon, Switzerland Type: BBV 320/200 Max. feed: 200 mm Fodjzil Suopfx Ad Iopi Max. strokes/min: up to 1,000 (feed-dependent) Accessories Kohler unwinder Heспо straightener SYS PHS 5000 Sound-insulating enclosure (orange)

Condition: used, Scharmann drilling machine Available from September Year of manufacture: June 1965, original purchase price: 267,045 DM Travel ranges: Longitudinal (X): 1,600 mm Vertical (Y): 1,200 mm Transverse (Z): 1,150 mm Spindle speed: 20 – 6,000 rpm Fodpszilmrjfx Ad Ispi Table size: 1,200 × 1,400 mm Table load capacity: max. 6 t

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm Fpsdjzik Iuopfx Ad Iei z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg Fodszikrajpfx Ad Iopi dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 Fpodpfx Asziknzsd Iei spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Work area for parts up to approximately 3,095 mm in length. Electro-spindles for milling, drilling, and hardware machining operations. Fpedpfxozkwhdj Ad Iei CNC numerical control with Masterwork/MW software. Pneumatic clamping system. Weight approx. 1,700 kg.

Condition: used, Year of construction: 2009, machine/vehicle number: A0908/7866, working width: 250 mm, KOCH SBD-B Saw-Mill-Drill - Pass-Through Machine The machine has the following functions - loading magazine - 2 units with a formatting saw diameter 400/30 mm - 4 milling units with oscillation 4KW 18,000 rpm adjustable pneumatic oscillation - 2 horizontal drilling supports head 7 spindles (2 in the 32 mm module, 5 in the 16 mm module) - 3 vertical drilling supports head 14 spindles (12 in the 32 mm module + 2 extreme angular in the 32 mm module - 3 horizontal drilling supports Y axis 2 heads 16 spindles (14 spindles in the 32 mm module + 2 angular in the 32 mm module + 1 head 8 spindle (7 in the 32 mm module + 1 middle angle 32 mm - Return belt to the operator - Supports for long elements The machine does not have doweling units Dimensions of processed elements Fpedswd Rlfspfx Ad Isi L- 350-2500 W- 30-200 Gr- 15-75 Machine configured for processing table elements, sample elements in the attachment

Year of construction: 1990, condition: ready for operation (used), A Deckel CNC universal milling machine is offered. Travel X/Y/Z: 700mm/600mm/550mm, quill stroke: 80mm, milling head swivel range: +/-90°, spindle power: 12kW, max. spindle speed: 6300rpm, feed torque X/Y/Z: 13Nm/13Nm/21Nm, feed rate X/Y/Z: 6m/min, rapid traverse X/Y/Z: 6m/min, tool holder: SK40, measuring resolution: 0.001mm, 4th axis resolution: 0.001°, max. slide load: 1000kg, number of T-slots: 1, T-slot width: 14H7mm, mounting holes for table accessories: M12, control: Deckel Dialog 11. Machine weight: approx. 3900kg, electrical cabinet weight: approx. 475kg, 5110mm/4654mm/2335mm, floor space X/Y: approx. 6200mm/5700mm, floor load: 3500kg/m². Documentation available. Inspection by appointment possible. Fodpfxszkvlzs Ad Iopi

Condition: used, Copy Milling Machine DECKEL Fpsdpfx Adozku Rio Iei Model: KF 1 Machine No.: 61510 Year of manufacture: 1981 Weight approx.: 1 t

Condition: used, Year of construction: 2008, MILLING MACHINE STS AVANTGARDE HS YEAR: 2008 CNC: SELCA S 4045 DH WORKTABLE DIMENSIONS: 2,200 mm x 1,100 mm TRAVEL PATHS: X: 2,000 mm Y: 1,500 mm Z: 1,500 mm SPINDLE TAPER: ISO 50 MAX. ALLOWABLE LOAD: 6,000 KG AUTOMATIC BI-ROTARY HEAD: A 2.5° - B 2.5° SPINDLE SPEED: 4,000 rpm Fedpoxc Umhofx Ad Iopi POWER: 37 KW TOOL MAGAZINE: RANDOM, 24 POSITIONS HIGH PRESSURE: 20 BAR ACCESSORIES: 2-SPEED RANGE SELECTOR CHIP CONVEYOR MACHINE CAN BE SEEN IN OPERATION COMPLETE DOCUMENTATION

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 1102, I will sell a TENON spacer frame bender. It has a Polish menu, the bender is in very good condition, in constant use. It has a Polish menu. Fpedpfxjwp Szlj Ad Iji

Condition: used, machine/vehicle number: SMD10112, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, table length: 500 mm, table height: 1,060 mm, XYZ 1000LR VMC Siemens 828D Control Siemens 828D CNC Control X Axis Travel 1000mm Y Axis Travel 500mm Z Axis Travel 500mm Table Size 1060 x 500 Spindle to Centre Column 110 – 610mm XYZ Rapid Feedrates 20m/min Max. Table Load 800kg Spindle Speeds 8000rpm Spindle Motor 15kW Spindle Taper BT40 Fpjdpfxezkrrko Ad Isi 20 Station Carousel ATC Footprint 2865 x 2390 x 2680mm Machine supplied with: Rebihsaw Tool Prove Swarf Conveyor Tooling As Phootgrpahed Swarf Bin For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79247 Machine Serial Number: SMD10112 £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, cutting height (max.): 530 mm, cutting width (max.): 800 mm, rotational speed (max.): 120 rpm, overall weight: 3,500 kg, Automatic bandsaw with mitre function Cutting range: 90° round 530 mm 90° flat 530 x 800 mm 45° flat 530 x 520 mm 30° flat 530 x 320 mm Cutting angle: 45°-0°-60° Saw motor: 3.0 kW Band speed: 20 - 120 m/min, infinitely variable Feed length: 1500 mm Features: Machine stand with chip collection tray, hydraulic cutting pressure adjustment Infinitely variable band speed, hydraulic guide arm adjustment Minimum quantity lubrication, shut-off at the end of the cut Chip brush, hydraulic mitre adjustment, hydraulic clamping device Fedpfezkrqtsx Ad Iepi Hydraulic saw band tension, operating manual

Condition: ready for operation (used), KNUTH GBF 30 / Drilling and Milling Machine -Digital display -Year of manufacture 1986 -Max. drilling capacity / steel 32mm -Speed range 100 - 2900 rpm -Speed stages 100/205/345/440/695/885/1450/2900 rpm -Cross slide with T-slots -Manual quill -Height-adjustable drilling head -Drilling/milling head can be swivelled -Drill chuck Fjdpfx Adezkrmbe Ijpi Dimensions: L x W x H 0.9 x 0.7 x 1.8 meters / 550 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, workpiece weight (max.): 2,000 kg, thread length: 3,000 mm, Ø400, LENGTH 3000 mm, MODULE 8-10, HELICAL AND STRAIGHT GEAR CUTTING. Fedpszkrgbsfx Ad Iepi

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,250 mm, table load: 2,500 kg, rotational speed (max.): 3,000 rpm, overall weight: 10,000 kg, CNC Heidenhain TNC 530 Maximum spindle speed: 3000 rpm Automatic tool changer SA 50 Power: 22 kW Fpodpfx Aoy Nnunod Isi Tool changer Travel: 2000 x 1000 x 1250 mm Chip conveyor Machine weight: 12,500 kg

Condition: used, Year of construction: 2012, x-travel 1600 mm Fpjdpfxjyyqgus Ad Ioi y-travel 710 mm z-travel 700 mm Control HEIDENHAIN, TNC 124 table surface area 2200 x 550 mm spindle taper SK 50 DIN 69871 spindle turning speed - stepless 40 - 1600 U/min spindle drive 11 kW feed X/Y/Z-axis 2000/2000/1000 mm/min. rapid traverse X/Y/Z axis 5000/5000/2500 mm/min feed motor 3 kW distance table / vertical spindle 50 - 750 mm distance table/horizontal spindle 60 - 760 mm table load max. 3000 kg total power requirement 15 kW weight of the machine ca. 8 t dimensions of machine L x W x H 3,15 x 2,75 x 2,70 m Accessories: Univ.-milling head with hydr. tool clamping, electron. handwheel, table housing, coolant

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 160-300, Selling a used Union Bielefeld Flutemaster UF 5.2 CNC milling machine. Year of manufacture: 1990. Condition: used, see pictures. Fodpezkp Ebsfx Ad Iopi Inspection and collection possible by arrangement. The buyer bears the costs and responsibility for disassembly/loading and transport. If interested, please send a price inquiry.

Condition: good (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 300 mm, workpiece height (max.): 300 mm, table length: 2,500 mm, table width: 1,300 mm, We are offering this well-maintained CNC-STEP T-REX N-1325 CNC portal milling machine, manufactured in 2022. Manufacturer: CNC-STEP Model: T-REX N-1325 Fpsdszkp A Hspfx Ad Ioi Year of manufacture: 2022 Condition: good Travel range: 1300x2500mm Z-axis clearance: 300mm Milling motor: HQD spindle, Model GDF46-18Z/3.5 3.5KW, max. speed 18000 rpm Vacuum pump with 5.5KW power The milling machine operates smoothly and without any errors. A complete set of ER25 collets (3-16mm) is included. Mobile tool length sensor This year, the control PC was replaced because the old one could not be upgraded from Windows 10 to Windows 11. Dust extraction shoe, 3D printed. The original dust extraction shoe unfortunately broke several times, but it can be purchased from CNC-Step. Available from July 27, 2026. Inspection is welcome at any time. Shipping from warehouse, free loading.