CoverMAK is a multifunctional coating machine that you can use for all your products. Its double-sided structure allows both liquid coating and simultaneous coating of products such as sesame, coconut, chia seeds. CoverMAK, which can be used with different processes such as paneling, allows you to perform your entire coating system quickly and reliably.
You can use it with 220 volt household electricity and you can easily install it without the need for any additional installation. Since it...
4
Max. operating temperature: 150°C, compressed air supply: 6bar, power: 33kW, weight: 1.85t.
Bst7tmp0ce
12
As Turkey's leading concrete block machine manufacturer, we provide quality service to you with a brick making machine . concrete block machine we produce for many countries of the world have the best equipment and design. We are always a solution partner for those who are looking for concrete blocks machine for sale.
In addition, our company helps you with concrete block making machine equipment and parts and produces fast results for you with its wide product range.
The products we produce ...
10
Automatic single head saw, blade Ø 500 mm + conveyor K-3000 (length 3m) right hand side as standard
APPLICATION:
For cutting aluminum, plastics and wooden profiles
FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to protective cover with safety sensor
- 0°, 15°, 22.5°, 30°, 45°, 67.5° right and left fixed angles
- Possibility to cut at any intermediate angle between
- 67.5° to + 45°
- Speed regulation based on the type of profile to be cut
- Horizontal and vertical pneumatic clamps
STAND...
Max. cutting force 30 tonnes
Cutting head 400 x 500 mm
Bed size 2300 x 510 mm
Stroke length (adjustable) 10 - 120 mm
Belt width 1800 mm
Operating height 990 mm
Bnlwiwyfgv
Pump motor capacity 1.1 kW 1.5HP
Approx.weight 3560 Kg
Traverse and feed drives closed loop, D.C. servo motors
Feed System “Ping and grab” clamp feed - two fixed,
one travelling clamp
Nylon belt cutting and feeding system
Intermediate cutting board and boar...
SEMIAUTOMATIC BOOK COVER POSITION MACHINE
LJ308A
Bhhx2keocu
-new machine
7
DELTA III
Automatic slicing saw , blade Ø 450 mm, PLC control system
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Shield 450mm
* minimum slice thickness 5mm
* maximum slice thickness at one time 750mm
- Safe cuts thanks to the cover with safety sensor
- Automatic terminal system
- Cutting speed control
- Digital adjustment of the blade extension according to the width of the cut profile
- Feeding of profiles with a system that prevents them from being damaged...
Length of the cut - 3000 mm
Width of the cut - 1900 mm and 2950 mm
Fence 750 mm
Auto cut set for cutting backward and forward
One sided blade
Zthyl0f7
Double sided blade
Cut thickness 1mm - 850mm
Speed control for rotation of blade
Variable speed control for cutting the length
Blade Size: 9745.20.0.5.18TPI
7
LEOplus
LEOplus automatic cutting centre 550 mm disc with automatic profile feed robot
APPLICATION:
Used for cutting aluminium, PVC and wood profiles
FUNCTIONS:
⦁ fully automatic operating system
⦁ hydropneumatic cutting
⦁ Automatic positioning. All steps between
-22.5° to +45° with an accuracy of +-0.1 degree
⦁ Industrial PC with Windows, 10" touch screen and easy, practical interface
⦁ Precision slicing function
⦁ Big memory
⦁ Adjustable disc stroke speed
⦁ Automatic cutting with previous
...
5
LEO R
Fully automatic, digital single-headed angle saw, blade Ø 550 mm
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
Muwcmk
- Automatic operating system
- Safe cuts thanks to the cover with safety sensor
- Automatic positioning on all stages between -22.5 °C and + 45 °C with servo motion system
- Batch processing and precision cutting
- Programming process and large memory
- remote access
- Data transfer via Ethernet and USB
- industrial...
4
Radial automatic single head saw LEO X with servo
As standard:
- 550mm target
- refrigeration system
- digital conveyor right 1pc
- automatic positioning of any angle between 30-90
degrees
- hydro-pneumatic cutting depth setting
- 3kW engine power
- cutting zone cover
- horizontal pneumatic clamps
- data transmission over the network, Ethernet, USB
- PC (IPC) HMI touch screen
Options for a surcharge:
- vertical pneumatic clamps
Bhm0dpjn2c
- chip extraction
- left-hand conveyor
- barcode printe...
2
Automatic single head saw METEOR I 600 (400V power supply)
disc Ø 600 mm, cooling system + conveyor K-3000 right in standard
APPLICATION:
For cutting aluminium, plastics and wood profiles
FUNCTIONS:
- Hydropneumatic cutting
Mvnuv0
- Safe cuts with automatic safety cover
- 0°, 15°, 22.5°, 30°, 45°, 67.5° right and left fixed angles
- Can be cut in any intermediate angle between
- 67.5 ° to + 67.5 °
- Speed control
- Horizontal (2pcs) and vertical (2pcs) pneumatic clamps
STANDARD EQUIPMENT:
- S...
8
METEOR I 420
Automatic single-headed saw blade Ø 420 mm as standard with manual dimensional conveyor K-3000 (3m)
APPLICATION:
For cutting aluminium, plastics and wood profiles
FUNCTIONS:
Endahuz
⦁ Hydropneumatic cutting
⦁ Safe cutting thanks to safety sensor cover
⦁ 0°, 15°, 22.5°, 30°, 45° right and left fixed angles
⦁ Can be cut in any intermediate angle between - 45 ° to + 45 °
⦁ Speed adjustment depending on the profile to be cut
⦁ Horizontal (2pc) and vertical (2pc) pneumatic clamps
STANDAR...
4
VEGA - II
Automatic single head saw, blade Ø 400 mm
APPLICATION:
For cutting aluminium, plastics and wood profiles
FUNCTIONS:
- Hydropneumatic safe cutting process
- Horizontal and vertical pneumatic clamps
- 0°, 15°, 22.5°, 30°, 45° right and left fixed angles
- Can be cut in any intermediate angle between
-45 ° to + 45 °
- Impact-resistant cast iron core
- Cutting speed adjustment based on the type of profile to be cut
STANDARD EQUIPMENT
- Service ring wrench
- Disc Ø 400 mm
- Cooling sy...
6
GEMINI - II A
Semi-automatic, digital twin-head cutting-off machine, 2x blade Ø 400 mm, twin-cutting
APPLICATION:
For cutting aluminium, plastics and wooden profiles
MAIN FEATURES:
- Hydro-pneumatic cutting
- Safe cuts thanks to the fitting of a cover.
- Manual positioning at all stages between -45° and +45°
- 0°, 15°, 22.5°, 30°, 45° right and left fixed angles - quick manual adjustment
- Automatic positioning of cutting length
- PLC control system
- Possibility of storing dimensions
- Touch s...
3
GEMINI VI
Automatic, digital twin-headed, 2x Ø 600 mm automatic angle saw blade
APPLICATION:
Ixcmuntn
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- Automatic positioning on all degrees between -22.5 ° to + 45 ° with servo motion system
- Adjustable disc extension
- Touch control panel
- PLC control system
- Cutting capacity of profiles from 410mm to 5050mm (between heads), max. profile length in load...
4
GEMINI V SA - disc extension up to 185mm
Semi-automatic twin-headed saw blade, blade:2 x Ø 550 mm
APPLICATION:
For cutting aluminium, plastics, wood
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- High-speed positioning in steps 22.5°, 45° to 90°
- Manual positioning of any intermediate angle within the available span range
Ixui09fj
- Precision cutting
- Maximum internal angle 90 degrees, maximum external angle -22.5 degrees
APPLICABILITY TO SELECT TH...
6
GEMINI V R - disc extension up to 185mm
Fully automatic, digital twin-headed angle saw, blade Ø 550 mm
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
- slice function
- Safe cuts thanks to the cover with safety sensor
- Automatic positioning on all degrees between -22.5 ° to + 45 ° with servo system
- Batch processing and precision cutting
- Programming process and large memory
- Automatic calculation of the cutting length
- Touch control p...
3
POLAR - V (price without cutter)
Automatic milling machine with pneumatic blade change
Maximum dimension of the milled profile: 275x180mm
APPLICATION:
For final milling of aluminum and PVC profiles
FEATURES:
- Hydro-pneumatic operation
2aqf3y9z
- Vertical and horizontal pneumatic clamps
- Operation protected by a cover equipped with a safety sensor
- Automatic return to starting point
- Milling at various angles
- Simple blade replacement
- Infeed conveyor
The price is net price.
Warranty 12 mon...
7
APEX II
Automatic double-headed hydraulic compactor
APPLICATION:
S38k2p
Automatic crimping machine for crimping aluminium profiles
FUNCTIONS:
- High pressure resistant steel work table
- Hydraulic operating system
- Manual positioning, automatic operating system
- Adjustable clamping system for wide profiles
- Easy adjustment of clamping blade distances based on the profile
- Two-stage hydraulic pressure setting
- Assembly without size changes in the corner assembly processes
- Crimping profiles...
6
APEX IV
Automatic four-head hydraulic crimping machine for aluminium profiles used in the production of window and door joinery
APPLICATION:
Automatic crimping machine for crimping aluminium profiles
FUNCTIONS:
- High pressure resistant steel work table
- Automatic positioning with servo control
- Touch screen
- Adjustable clamping system for high profiles
- Profile-based adjustment of kneading blades
- Hydraulic operating system
- Two-stage hydraulic pressure setting
- Safe working area with sa...
3
ORBIT IV SA
PLC-controlled semi-automatic machine for cleaning corners and PVC surfaces
APPLICATION:
It is used to clean the surplus resulting from the welding of PVC profiles
FUNCTIONS:
⦁ Cleaning the lower, upper and outer surface of the profile with two independent cleaning devices
⦁ Memory capacity for 250 profiles
⦁ Touchscreen control panel
⦁ Easy and quick entry of the program into the profile to be cleaned using Özçelik Makina's own software
⦁ Adjustable cleaning speed
⦁ PLC control syst...
11
ORION II SN
Automatic double head automatic welding machine for PVC profiles (seamless and standard welding)
APPLICATION:
Used to weld plastic profiles at different angles
FUNCTIONS:
⦁ Pneumatic work
⦁ Automatic process from start to finish
⦁ Welding time adjustment, digital temperature control
⦁ Temperature control from 0º to 350º with electronic thermostat
⦁ Welding from 30° to 180° with single head
⦁ PLC control system
⦁ Easy Teflon replacement system
Muvqww
STANDARD EQUIPMENT:
⦁ Right and le...
6
GEMINI IV SA
Bhmgw9zmsa
Semi-automatic, digital twin-head cutting-off saw, 2 x blade Ø 450 mm
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- Manual positioning on all steps between 45° and 90°
- Batch processing and precision cutting
- Programming process and large memory
- Automatic calculation of the cutting length
- PLC control system
- Cutting capacity of 4000mm and 6000mm profiles wi...
4
GEMINI X (disc extension up to 418mm)
Automatic radial bi-head cutting-off saw,
2x Ø 550 mm blade with large cutting range
APPLICATION:
For cutting aluminium, plastics
MAIN FEATURES:
- Hydropneumatic cutting
Bhmglcklqy
- Safe cuts thanks to the cover with safety sensor
- Automatic positioning on all steps between 30° and 90° with servo motion system
- Adjustable disc extension
- Touch control panel
- PLC control system
- Cutting capacity of profiles from 450mm to 6000mm (between heads), maximum ...
4
Automatic miter saw- Bewo 250mm
Jadbhgwz8
- Max saw diameter 85mm
- Length supply conveyor 6100mm
Komori Lithrone S 429 + Coating, year 2011
530 x 750 mm (20x29,5"), approx. 78 mio. impr.
Komori S-APC
Komori PQC-S
Komori PDC-Lite2
Komorimatic dampening
16K Speed version
Ink unit temperature control
Komori AMR
Hso7osv
Komori KHS-AI
Streamfeeder
Extended delivery
Sep. coating unit with chamberbladesystem
Baldwin IR-Dryer
Autom. Ink roller washer
Autom. Blanket washer
Autom. Impressioncylinder washer
Cardboard device
Powder sprayer
Etc.
Available: immediately
7
Customer benefits of a technica centre grinding machine:
More profit in the grinding process due to lower production costs & sustainable process reliability
High precision in the grinding result due to a robust and precise machine design
High productivity of the machine due to a short grinding process and shortened production times for the subsequent processes
An optimised grinding process thanks to the special cross-grinding, as less thermal stress is generated from the workpiece and more feed ...
Manuelle Winkelverpackungsmaschiene / Semi-Automatic Foil sealing machine ROBOPAC Micra MYear 2002 - Serial-No. 21037
Produktabmessungen / Product sizes
Abmessungen der Schweißleisten (LxB) 540x390mm
Produktionsleistung 300Produkte/Std. / Production 300pcs/h
Elektrischer Anschluss / Power supply: 230V 1Ph 50/60Hz(V)-Online-Video-Inspection by Skype-Video-
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately - Can be inspect-
-On Stock Emskirchen / Nür...
11
Code: 0375
Brand: OMEC
Model: F8 - CE Standard
Automatic dovetailing machine for dovetail joints on drawers and various furniture elements - CE Standard
The machine is equipped with a unit of 8 spindles with equal mill cutters that allow the production of indents of different heights.
Technical data:
No. 8 spindles
Spindle revolutions /min 17,000
Maximum working width mm 400
Distance between centres of indents mm 25
Drawers production 120 / hour
Power Kw 7,5
Working pressure 6 atm
O...
4
saw blade diameter 400/425 mm
cutting diameter 130 mm
stroke 150 mm
capacity 45 degrees: round 130 mm
capacity 45 degrees: square 110 x 110 mm
capacity 90 degrees: square 120 x 120 mm
cutting speed 11/22 m/min
feed speeds 670 mm/min
feed length 0-1200 mm
total power requirement 2,5 kW
Bvxoioeuyc
weight of the machine ca. 1,8 t
dimensions of the machine ca. 1,8 x 3,8 x 2 m
7
Control Heidenhain TNC 355
Be7yqptvpf
x-travel 1.000 mm
y-travel 400 mm
z-travel 450 mm
surface area 1.300 x 400 mm
feed range 1 - 6.000 mm/min
number of spindle speeds 60 - 3.600 U/min vertikal
number of spindle speeds 30 - 1.800 U/min horizonta
spindle taper SK50
vertical and horizontal milling possible
15
Max. panel width: 1700 mm
Max. panel length: 800 mm
No of Top Units: 1
No of injectors: 1
Pkdyv
Positioning of Units by NC: yes
ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS
Bfrmqzlakn
MODEL: PRIAM
MANUFACTURED IN 2022/ BRAND NEW
Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to des...
6
Automatische Banderoliermaschine - Automatic Banding Machine Lilie 240-30Serial-No. 928511
Beschichtetes Kraftpapier bzw. Kunststoff-Folie
Coated paper or plastic film
Technical specifications:
Leistung / Output: up to 25 Takte/min / cycles/min.
Produktbreite / Width of banded product: 30 - 310mm
Produkthöhe /Stack height: 3 - 220mm
Taktauslösung /Triggering of cycle:
– von Hand/Starttaster / manual/start button
– über Fußschalter / foot actuator
– über Automatiktaster / automatic mode...
11
Technical characteristics
PU 15/45S
Width 450mm
Feed 60m/min
Bygphs0s
400V 3Ph+n
Loader, belt sander width 60mm, universal sanding unit 0,75kW
Out mechanization Power and Motors
Pluging: Three-phased Overall dimensions
High speed (3600 pcs/hr)
-Can be printed on offset papers, transfer printing papers, stickers. It is suitable for printing between 120 and 350 gr.
The machine is new, immediately available from stock.
Minimum print size: 27x35 cm
Maximum print size: 52x78 cm
N2ruj
Mold Frame area: 94x94 cm
Paper Loading Height: 70 cm
Weight: 3800 kg
Total Power: 7.58kW
Dimensions: 305x147x128 cm
6
saw blade diameter 225 mm
cutting diameter max. 60 mm
Dyag7u
feed max. 600 mm
total power requirement 5 kW
weight of the machine ca. 1,03 t
7
Semi-automatic machine for spiral binding Renz Autobind AB 500
Gox0dm7
The machine is in very good condition, ready to work.
Efficient semi-automatic machine for the production of calendars, notebooks and other products bound in metal spirals.
Fast work
Supports diameters in the range of 3/16 „-1 1/8”
Working width up to 500 mm
Crimping thickness approx. 23 mm
Capacity up to 2000 cycles / h
The semi-automatic machine unwinds the spiral from the spool, counts the loops, cuts the spiral to the set...
3
Processable size: 157,5*105,5cm
Factory number: AL 031278
27zco7
Available for immediate shipment after trial.
2
- stream feeder
- UV and water dispersive coating
- IR or hot air drying
- 3 curing lamps (3 x 9,7 KW)
- other standard equipment
Technical details:
- max. sheet size: 800 x 1100 mm
- min. sheet size: 340 x 406 mm
- coating area: 790 x 1090 mm
- paper thickness: 80 to 600 gsm
- machine speed: 6000 sheets / hour
F909xy2
saw blade diameter 460 mm
cutting diameter 30- 150 mm
stroke 190 mm
Control Siemens touch
capacity 90 degrees: square 150 x 150 mm
sawblade width 2,25 mm
cutting speed 30 - 120 m/min
feed in one step 10- 850 mm
feed - independent 7000 mm
total power requirement 22 kW
weight of the machine ca. 5,5 t
dimensions of the machine ca. 3,2 x 2,4 x 7,6 m
This high capacity full automatic circular sawing machine will be spplied with
B3ovpkibbx
oil dust cooling arrangement. Machine can be ordered with...
15
Max. panel width: 800 mm
Max. panel length: 3200 mm
Byaqv22o
No of Bottom Units: 6
No of injectors: 12
10
Control Heidenheim 124
Gxoinw
x-travel 500 mm
y-travel 400 mm
z-travel 400 mm
tool adaptor SK40
max. 4.500 U/min
table load max. 200 kg
table size 700 x 500 mm
table rotating 360 Grad
table swivelling +/- 95+10 Grad
controlled axis 3
2 (3+2)
Number of working hours max. 8.000 h eigeschaltet h
output 9 kw
weight of the machine ca. 2,79 t