Automatic planer, automatic profile milling machine

Kuper SWT 23 XL-5

Condition: used, Year of construction: 2008, Price: On request Four-axis planer Kuper SWT 23 XL-5R Year of construction 2008 min/max Working height 8/150 mm min/max Working width18/230 mm Spindle speed 6000 rpm Spindle diameter 40 mm Motors Spindle - horizontal down 7.5kW  Spindle - vertical right 7.5kW Spindle - vertical left 11kW Spindle - horizontal top 11 kW Dimensions 3100 x1850 x 1750 mm (L x W x H), weight 4000 kg Outfeed table  Kjdpfxswnit As Ahvsww Weidner buffer table Type DBT 4500B Dimensions 4500 x1750 x 97 mm (L x W x H) Available from November 2024 - Year: 2008 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), functionality: fully functional, number of engines: 4+4 opening: 6 meters Kwsdpfew D Nq Tex Ahvew

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Table lenght 2000 mm. Kwodpexr U Azjfx Ahvjw Workingwidth: max. 230 mm / min. 18 mm. Workingheight: max. 150 mm / min. 8 mm el height adjustable Speed 7-36 m/min. 3,7 kw motor, cardan 5 pcs. Ø 40 mm. spindels: b + r + l + t + b (specifikations see file attached Siemens touchscreen see all technical features attached file

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 2166, functionality: fully functional, working width: 230 mm, spindle diameter: 40 mm, spindle speed (max.): 6,200 rpm, working height: 125 mm, TECHNICAL DETAILS Minimum working height: 8 mm Maximum working height: 125 mm Minimum working width: 18 mm Kwsdpfxswyviue Ahvjw Maximum working width: 230 mm Minimum feed speed: 6 m/min Maximum feed speed: 28 m/min Spindle speed: 6,200 rpm Spindle diameter: 40 mm MACHINE DETAILS Electrical Data Main fuse: 80 A Machine voltage: 400 V, 3PH, 50Hz Motors Bottom spindle: 5.5 - 7.5 kW Right spindle: 5.5 - 7.5 kW Left spindle: 7.5 - 10 kW Top spindle: 7.5 - 10 kW Dimensions & Weight Dimensions L x W x H: 4,400 x 2,000 x 1,850 mm Weight: 4,000 kg

Condition: refurbished (used), DIFFERENT TYPE OF MOTOR AND SLIDE for CELASCHI DET SECOND-HAND, FULLY RECONDITIONED Kwsdodvlcyspfx Ahvjw

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Kodpfx Ajfxpbmjhvoww

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Kwjdsv Si Szopfx Ahvow Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2017, operating hours: 854 h, total width: 2,450 mm, total height: 1,100 mm, total length: 1,900 mm, Empty weight: 800 kg Price: On request - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 5037411-000150 - Operating hours: 854 - Transport dimensions: 1900mm x 2450mm x 1100mm (l x w x h) - Transport weight [kg]: 800kg Kodpoxan Utofx Ahveww - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1997, Line 3 Stenner MHS9 machines from 1997 Kedpfx Aew Nrhkjhveww

Condition: used, Year of construction: 2009, SECOND-HAND BRIQUETTING MACHINE PRODECO MOD. L70- CE RULES Kwjdpewrddqofx Ahvsw - Briquet diam. 70mm - Production 50-120kg/h - S/N 89 - Year 2009 (CE) - Complete with manual